Using TCP/IP and SNA LU0 and TAPE communication protocols

Hi ,
I need to require information to communicate over TAPE, TCP/IP and SNA LU0 protocols using OSB/SOA SUITE ,
kindly guide me if it's possible to make services that can communicate with the above mentioned protocols and if it's n't possible, then how can OSB/SOA SUITE communicate with above mentioned protocols, or are there any adapters to be used for the conversion of the above mentioned protocols into OSB understandable protocol.
Regards,
Abhinav

Hi Abhinav,
You may use transport SDK to develop custom transport and use them with OSB. Please refer -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/part_tsdk.htm#sthref954
There is also a sample for socket transport-
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/example.htm#i1036682
Regards,
Anuj

Similar Messages

Using a TCP/IP Connection to REQUEST and RECEIVE data from a iDRX Signal Conditioner through a EIS-2B Server

First let me say that I am new to labview, please bear with me. I want to use Labview to querry a iDRX thermocouple signal conditioner using tcp/ip. The signal conditioner is wired to a EIS-2B server. The server is at 198.162.10.53 and port 2000. The data request command is *10x01\r and the expected data to be returned is 01X01+00064.6 (or whatever the actual temperature is). The conditioner and server are working and testing correctly using the iDRX supplied software.
My attached vi runs, creates no errors, but returns no data either. I can find many examples of how to set up a listener, but I need to QUERRY and then RECEIVE the data.
Thanks in advance.
Attachments:
Alyeska 4.vi ‏15 KB

Hi Alyeska! Welcome to the forums!
I took a quick look at the VI, and I have four quick suggestions for
you that may give us some information about what is happening.
You may be experiencing an error that just isn't detected by the VI -
normally we add an error handling VI at the end of program execution to
report any errors that occurred. Also, it's helpful to have a way
to exit the while loop so that the program can finish executing if an
error occurs. Third, you may need to introduce a delay between
the query and the read command to allow the server time to process and
respond to the request. Lastly, if you already know how long the
return message will be, you should wire this length to the Bytes to
Read input of the TCP Read VI so it knows to return the data once it
receives that number of bytes. I've attached a modified version
of the VI incorporating these - give this a try, and let us know if you
still see an error, and if so, what error. Also, if you haven't
taken a look at it already, there are excellent resources for learning
LabVIEW at the LabVIEW Fundamentals page - it's a great way to introduce yourself to LabVIEW and get up to speed quickly.
Cheers,
Matt Pollock
National Instruments
Attachments:
Alyeska 4.vi ‏19 KB

Communication between Windows 7 and Windows 8(and above) using Sockets(TCP and UDP)

I need to use TCP and UDP using Sockets to communicate between two(or more) applications installed in Windows 7 and Windows 8.
Is it possible.? I tried within a LAN, but in vain. If needed I would post the appropriate code.
Note: I only tried running exe(s) in these machines and not with installation.

Hello Prabodh.Minz,
>>Is it possible.?
It is not clear what develop language you are using, here are examples which uses the C# based on .NET. It created the communition between two machines by using sockets with TCP protocol, a server and a client:
Synchronous example:
Client and
Server.
Asynchronous example:
Client and
Server.
Multi-client per one server - socket programming in .net(C#)
>>Note: I only tried running exe(s) in these machines and not with installation.
There are all .exe.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows Media Player no sound while playing a avi file in server and client connection using TCP/IP connection

Hello there
I have a problem with my windows media player while using server and client connection by using TCP/IP connection. So when I play a video using Windows Media Player in LabVIew there isn't any sound come out but when I'm playing a video by a Windows Media Player only the sound will come out. Can you help me solve this problem?
I also upload the vi as the reference.
The username for the client is ihsanhaikalz and the password is ganteng
Thanks
Attachments:
Client Remote.vi ‏746 KB
Server Remote.vi ‏1433 KB

Hi ican,
I was looking at your VI's but I cannot seem to pinpoint exactly where you are using Windows Media Player. In order to more quickly assist you, could you please recreate this issue more concisely in a smaller set of VIs. Also, were you able to get sound when you did not use the TCP/IP connection and simply played the files in LabVIEW?
I noticed in a few places that you were using the Play Sound File.VI from the Graphics and Sounds palette. Is that what you are refering to? I noticed there that the file path that you have designated for the song is simply the song title. Instead, this should be a path to where the song is located on your computer.
Also, if you are planning on using Windows Media Player, have you considered using the ActiveX commands for Windows Media Player? Here are a few examples if you are unfamiliar with this functionality.
Example 1 and Example 2.
I hope this helps!
Kim W.
Applications Engineer
National Instruments

Can I "print to tape" using PAL and Capture from that tape using NTSC?

I need to edit video from a video card in the PAL format somehow onto the FCE Timeline using NTSC.

This is not any where nearly as simple as it sounds. You need to standards convert the PAL material to NTSC. I'd recommend using Graeme Nattress' Standards Converter for this. Then you can edit in NTSC and record to NTSC tape.
Just to add, FCE does not accept standard definition material from a video card. It only handles AVCHD media from a video card. The only HD tape format it supports is HDV.
Message was edited by: Tom Wolsky

What is the best setup (cords, hardware and software) for converting tape cassettes to mp3 using iMac?

I have a huge collection of tape cassettes that I want in my iTunes library. I want to know what the best cords, hardware (type of Tape cassette player/recorder) and software to use.

It depends on what kind of inputs your Mac has:
If your iMac is a 2012 or older model it probably has an audio line input, in which case you can directly connect your tape deck outputs to your iMac. Generally this requires a cable with 2x RCA male connectors on one end and 1x 1/8" (3.5mm) stereo male connector on the other end.
If you have a more recent iMac that does not have a line input you will need to get a USB audio interface like a Focusrite Forte, but in these cases you will need to pay attention to the kind of cable inputs the USB device has.
In both cases you will need recording software. There are many choices. I have used Sound Studio with great success for tapes, vinyl and live recordings. (Note: if you are using a USB audio interface it may come with its own recording software.)
Pay attention to whether or not your tapes were recorded with or without Dolby B or C noise reduction; and also whether or not your tape deck supports none, Dolby B or Dolby C - getting each tape matched with your deck settings makes a big difference in the results. And depending on how quality conscious you are you may also want or need some noise reduction software, in which case I suggest looking at Wave Arts MR Noise, SoundSoap or Audacity.
You might also consider just purchasing selected CDs instead of investing in all the work required to set up, record, edit & clean up recordings from some of your old tapes.

TS3274 When using my IPad, the screen will go dim and I need to tap it restore it to its bright state. This same thing happens many, many times while I am using it.

When I am using my IPad, the screen will get dim and I need to tap the screen to get it to brighten up again. This happens repeatedly while I am using it. Is there something I can do to stop that from happening?

You don't necessarily need to set it to never...being set that way, you'll risk depleting the battery in case you forget to lock the screen.
Instead, use a value greater than your previous 2 minute setting...see which time setting would work for you. The settings are:
2 Minutes
5 Minutes
10 Minutes
15 Minutes
Never

Automation using IP cameras, temperature, motion sensor and smoke sensor Using TCP/IP

Hello people,
My name is andy.
I have right know a project that i must automation a building using TCP/IP.
This building must have IP cameras, temperature, motion sensor and smoke sensor using the TCP/IP with a Sever.
My question is ?
what is IP cameras support Labview ?
and what VI i must Use??????
if any person have experience in this area for me is helpful to help me for some idea's.
please write me
thank you

Hi koeyers,
Are your cameras Gigabit Ethernet? If they are, we have some interfaces that you can use as frame grabbers.
http://sine.ni.com/nips/cds/view/p/lang/es/nid/203245
And you can use our image acquisition driver, NI-IMAQdx, you can download our driver for a 30 days free trial.
http://joule.ni.com/nidu/cds/view/p/id/960/lang/es
NI-IMAQdx installs LabVIEW VI’s that calls the NI-IMAQdx driver to control you camera, example files are install with the driver too!
If you are not using Gigabit Ethernet, you will need to use the driver that ships with the camera. Do you have the data sheet of the camera you are using? Or are you starting to look for cameras?
If you are looking for cameras this is a good link that will help you find cameras that are supported by our drivers:
http://sine.ni.com/apps/utf8/nipc.specs?action=search&asid=1102
Some IP cameras (not Gibabit Ethernet) have ActiveX calls to control them, and LabVIEW can make those ActiveX calls, you just need to have the documentation of those calls that must come with the camera. Other cameras might have DLL’s and you’ll have to make calls to those DLL’s from LabVIEW.
They are more difficult to program that Gigabit Ethernet because they are not a standard, and National Instruments doesn’t have a specific driver for them, but we can make calls to the specific driver of the camera.
Later, if you want to process the images, then you will be interested in NI Vision:
http://www.ni.com/vision/vdm.htm
Please let me know if this helps you or you need more information.
Tania Lozoya | National Instruments

How to Communicate a string between LabView 7.0 and VB using TCP/IP

HI
I want to know how to communicate , " by passing a string " between LabView 7.1 and VB 6.0 using tcp/ip . Please if anyone couild help me on this..
Regards
Ashish Doshi

Ashish,
I've got great news for you! LabVIEW has built in TCP functions. They are located in Data Communication>>Protocols>>TCP. From the LabVIEW side, I think you'll find everything you need in there. Good luck!
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

Tcp data b/w labview and c++

Hi
i am trying to establish TCP connection b/w LABVIEW and C++ program. Server is established in C++ while client is implemented in labview.Although connection is successfully establish b/w server and client, both are unable to correctly understand data send/receive among them. Forexample if i want to send an int type send_array from server, i use standard WINSOCK function "send" like that:
send(AcceptSocket,(char*)send_array,129*4,0);
but when client in labview receive this array, it shows unexpected values.As a client, I used "simple data client.vi" with one modification i.e. as sent data size(129*4 bytes) was fixed, only one TCP read was used .
Same problem exists if i send data from client to server.
Kindly help me
Best Regards
Solved!
Go to Solution.

It's probably an big/little edian problem. If you are using the Flatten/Unflatten from String functions, you can specify which to use.

I have 2 apple id's. But i want my music on iTunes common on both id's. I use one ID on my iPad and the other on my family iMac. how do i do it?

I have 2 apple id's. But i want my music on iTunes common on both id's. I use one ID on my iPad and the other on my family iMac. how do i do it?

Settings>Store...tap the ID shown...sign out...now sign back in with the ID you want to use.

How can you use one NetStream to publish video and audio from another NetStream in AS3?

Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen. How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere? I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved. The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe

Updated to IOS 5.0.1 and now if I tap on a game icon instead of opening the game a grayish color comes over it and nothing happens. How can I get my games to work again?

Updated to IOS 5.0.1 and now if I tap on a game icon instead of opening the game a grayish color comes over it and nothing happens. How can I get my games to work again?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

First use of jsp and java bean and "Unable to compile class for JSP" error

Hi,
I am trying to create my first jsp + java bean and I get a basic error (but I have no clue what it depends on exactly). Tomcat seems to cannot find my class file in the path. Maybe it is because I did not create a web.xml file. Did I forgot to put a line in my jsp file to import my bean?
Thank you very much for your help.
Here is my error:
An error occurred at line: 2 in the jsp file: /login.jsp
Generated servlet error:
[javac] Compiling 1 source file
/usr/local/tomcat/jakarta-tomcat-5/build/work/Catalina/localhost/test/org/apache/jsp/login_jsp.java:43: cannot resolve symbol
symbol : class CMBConnect
location: class org.apache.jsp.login_jsp
CMBConnect test = null;
I only have this in my directory:
test/login.jsp
test/WEB-INF/classes/CMBConnect.java
test/WEB-INF/classes/CMBConnect.class
Do I need to declare another directory in classes to put my class file in it and package my bean differently?
Here is my login.jsp:
<%@ page errorPage="error.jsp" %>
<jsp:useBean id="test" type="CMBConnect" scope="session" />
<html>
<head>
<title>my test</title>
</head>
<body>
<h3>Login information</h3>
<b><%=session.getValue("customerinfo.message")%></b>
<form> ....... </form>
</body>
</html>
and here is my CMBConnect.java:
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class CMBConnect
public CMBConnect () { }
public String openConnection(String id, String password) {
String returnText = "";
try {
Connection con = null;
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
con = DriverManager.getConnection("jdbc:oracle:thin:@myserver.abc.com:1521:TEST", id, password);
if(con.isClosed())
returnText = "Cannot connect to Oracle server using TCP/IP...";
else
returnText = "Connection successful";
} catch (Exception e) { returnText = returnText + e; }
return returnText;
Thanks again!

Thanks for you help
I created the package and I get this error this time:
javax.servlet.ServletException: bean test not found within scope
     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:822)
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:755)
     org.apache.jsp.login_jsp._jspService(login_jsp.java:68)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:268)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:277)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:223)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

Using TCP/IP and SNA LU0 and TAPE communication protocols

Similar Messages

Maybe you are looking for