Using the output of the transactions and saving them in a file using a prog
Hello Gurus'
Over the while i had been working on something which involves sending system data of some of the SAP BASIS transactions(ex SM21, ST02). I am wondering if there is any way using ABAP programming that calls the desired transaction(within the program), get's the output(as displayed if it had been run independtly) in any file types. As there are complex BASIS level details i am looking for the approach utilizing the already existing SAP outputs for the transactions.
Please help here.
Thanks and Regards,
Puneet
You might want to ask in the Basis forum. Maybe there is already some standard functionality available for what you're trying to achieve. Also check out this page: http://www.kabai.com/abaps/q.htm
Similar Messages
-
I have scanned about 1600 pages of 100-year old documents and saved them as pdf files. I would like to search them for keywords and phrases. Can anyone recommend software that can be used as an index or search engine for these documents?
If you have Adobe Acrobat (not Adobe Reader) the program can perform an OCR on the document you acquired.
In the past I used ABBYY FineReader -
Writing to specific cells of existing Excel file and saving as a new file using LV 8.6
Hi all,
I am new to LV and am currently tasked to create a program that can open an existing excel file, input data in the program that will be written to a specific cell in the excel file and then saving the current edited file as a new file.
I have browsed through all the forums but I am unable to view the examples sent in them as I am using LV 8.6 which is why I am still having trouble visualizing how to create a program like this. Can anyone help me and mentor me how to write this program in this version of LV? I do not have a microsoft office toolkit hence another approach could be preferred. Thank you.
Aaron
Solved!
Go to Solution.Thank you for helping me on this. However I do not really understand how does ActiveEx work. I have created a Vi according to the picture that you provided but there was some error in running the file.
Below is my own VI that I am trying to create. It consists of multiple string inputs which I am trying to input each into an existing file. I have created a separate txt file which has the cell numbers. I am trying to allocate each string into each respective cell in an existing file. I am currently having the problem of doing this "allocation" of each string as I do not have the microsoft office tool kit. Is there any other way for me to do so?
Also, I would like to save the newly created file as a new file with the name as seen in my VI. How would I be able to do it?
Please help me as I am stuck here but do not know how to continue
Attachments:
untitled.JPG 33 KB -
How to send the output of a script to a txt or rpt file using T-sql?
Hi!
I have some code which we use to record info about a database when we decommission it. I normally click Query > Results to File and then run it to produce a file. I need to do this via t-sql so I can automate it. Any idea what code I need to make
this script output to file?
Thanks,
Zoe
SET NOCOUNT ON
DECLARE @Databasename varchar(50)
DECLARE @date as char(10)
DECLARE @session_usr nchar(30);
SET @Databasename = db_name()
SET @date = convert(char(10), getdate(), 121)
SET @session_usr = SYSTEM_USER;
DECLARE @sqlCommand varchar(1000)
select current_user
Print '================================================================================'
Print '========== SQL Decommission Report for '+ @@SERVERNAME +' ========='
Print '========== Executed on ' + @date +' by '+ rtrim(@session_usr) +' ========='
Print '================================================================================'
Print ' '
Print 'Database properties'
Print '----------------------------------'
select substring(name,1,25) as Name,substring(filename,1,40) as File_Name,cmptlevel as Compatibility_level from master.dbo.sysdatabases
where name = @databasename
Print 'Full Text Catalogs'
Print '----------------------------------'
select substring(name,1,20)as Name,status,substring(path,1,52) as Path FROM [master].[dbo].[sysfulltextcatalogs]
Print 'SSIS Packages'
Print '----------------------------------'
IF (select cast(@@version as varchar)) like '%2012%' begin
print 'sql 2012 instance'
select substring(name,1,20) as Name,substring(description,1,40) as Description,ownersid as Owner from msdb.dbo.sysssispackages
end else if (select cast(@@version as varchar)) like '%2008%' begin
print 'sql 2008 instance'
select substring(name,1,20) as Name,substring(description,1,40) as Description,ownersid as Owner from msdb.dbo.sysssispackages
select substring(name,1,20) as Name,substring(description,1,40) as Description,substring(owner,1, 18) as Owner from msdb.dbo.sysdtspackages
end else if (select cast(@@version as varchar)) like '%2005%' begin
print 'sql 2005 instance'
select substring(name,1,20) as Name,substring(description,1,40) as Description,suser_sname(ownersid) as Owner from msdb.dbo.sysdtspackages90
select substring(name,1,20) as Name,substring(description,1,40) as Description,substring(owner,1, 18) as Owner from msdb.dbo.sysdtspackages
end
Print 'Linked Servers'
Print '----------------------------------'
SELECT substring(srvname,1,35) as LinkedServer_Name,substring(datasource,1,35) as Data_Source FROM master.dbo.sysservers WHERE isremote = 0
Print 'Replication'
Print '----------------------------------'
IF (select count(*) from master.dbo.sysdatabases where name = 'Distribution') > 0
select substring(publisher_db,1,20) as Published_DB,substring(Description,1,40) as Description from distribution.dbo.MSpublications
ELSE print 'No replication'
Print ' '
Print 'Database Mail'
Print '----------------------------------'
SELECT substring(name,1,20) as Name,enabled,substring(email_address,1,35) as Email_address,last_email_date FROM msdb.dbo.sysoperators
where last_email_date > dateadd(day,-30,getdate())-- detect whether any of the systems have sent an email in the last 30 days
Print 'CLR Assemblies'
Print '----------------------------------'
select substring(Name,1,20) as Name,substring(Type_desc,1,35) as Description,Create_date from sys.objects where object_id in (select object_id from sys.assembly_modules)
Print 'Logins'
Print '----------------------------------'
SET @sqlCommand = 'select substring(name,1,40) as Name,substring(dbname,1,30) as Default_Database from master.dbo.syslogins where sid in (select sid from '+ @databasename +'.dbo.sysusers where issqlrole <> 1 and hasdbaccess <> 0 and name <> ''dbo'')'
EXEC (@sqlCommand)You can use bcp to export from database to flat file.
It requires xp_cmdshell to work from a stored procedure.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
But they sometimes show up sideways or uspided down when viewing them on my tv, even thogh I have flipped and saved them in my desktop folder. How can I view them in the same format as I have them saved in my computer?
Welcome to the Apple Community.
Try editing them in a different photo program. -
Help to catch the output of a Transaction
Hi,
I have this issue and need help, I have a program lets say "ZPROGRAM", this programs calls a RFC "ZFUNC" this function must be able to send the parameters to execute a SAP standard transaction for example MB51, the function must send the plant number, storage location, and material number, then this RFC must catch the output of the report into an internal table so that i can work with the output in "ZPROGRAM", in other words what I see on screen as result of MB51 I need it in an internal table so that I can manupulate the data.
I hope someone could tell me how to accomplish this.
Thanks in advice.Hi,
Pls try
DATA list_tab TYPE TABLE OF abaplist.
DATA vlist LIKE table of LISTZEILE WITH HEADER LINE.
submit RM07DOCS
with XXX
EXPORTING LIST TO MEMORY
and return .
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = list_tab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = vlist
listobject =list_tab
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
Regards,
Pole
Edited by: Pole li on Jul 17, 2008 3:57 AM -
Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.
Apple Mail isn't going to change the format of any of your attachments. it isn't going to corrupt them either.
Exchange is a transport protocol and server. The issue you describe is not related to Exchange.
There are many different versions of Microsoft Outlook in use and they all have e-mail bugs. Different versions have different bugs. Some Apple Mail hack to get around a bug in Outlook 2003 may cause the same message to be problematic in Outlook 2000. Fix them both and another issue will cause trouble in Outlook 2007. You can't fix this. Apple can't fix this. Microsoft can and has but that is irrelevant if your recipients are using older versions.
One specific problem is that Apple Mail always sends image attachments inline, as images, not as iconized files. You can change this with Attachment Tamer. Just be aware that use of this software will break other things such as Stationery. E-mail is just a disaster. To date, no one outside of Apple has ever implemented the e-mail standards from 1993. Apple has continually changed its e-mail software to be more compatible with the de-facto standards that Netscape and Microsoft have unilaterally defined and people documented as "standards" after the fact. The e-mail messages that Apple Mail sends are 100% correct and do not violate any of the original standards from 1993 or the Microsoft/Netscape modifications. The problem is entirely bugs and limitations in various versions of Outlook. -
I want to add hyperlink in the illustrator file and want the output in the PDF
I want to add hyperlinks in the illustrator file and want the output in the PDF.
I tried to add the multiple hyperlinks on the text and images in the illustrator by using the attribute panel but the links are not working in the published PDF.
Is there is any other method to create a hyperlink in the illustrator?
Can anybody help me out in this
ThanksInteresting, Carlos.
There's another method by JET: Re: hyperlinks in Ai -
EXIT/BADI for enhancing the output of the transaction S_ALR_87013532
Hi,
greetings to all!! I have a problem here guys-I need to find any exit or badi for enhancing the output of the tcode S_ALR_87013532.This tcode is used for seeing the planned/actual/variance of project cost.
In the output we have got 3 columns-total of years, previous years and 2009. Under each column we have Plan, Actual, Variance and VAR %. Our requirement is to show Functional Location(PRPS-TPLNR), Budget Number(TCN01-SWRT0), SBU (TCN01-SWRT1) and Region (TCN01-SWRT2) in each of the clolumns-you can also get the last 3 fields in PRPS table as USR00, USR01 and USR02.
Can anyone help please?could not find anything worthwhile on SDN. Thnx a lot !Hi,
Check these User-Exits..
Exit name Short text
KAHFEX01 Selection data for commercial reporting in PS
KAP10001 PS: Hierarchy Reports for Projects
KAP60001 PS: Export Project Key Figures into R/3 EIS
Also check the BADI
WBS_USER_FIELDS_F4
Regards
Raghu
Edited by: Raghavendra Rao G on Sep 2, 2009 12:26 PM -
What is the diffreence between call transaction and session method
hi gurus
can any one suggest me
what is the difference between call transaction and session methods
in which cases we have to use teh call transaction and
in which cases we have to use session method.
thank you
regards
kals.CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Regards,
Sunil Kumar Mutyala -
Report to see the output of VLPOD transaction
Hi Gurus
I have configured Proof of delivery concept to caputre loss of Quantity due to moisture. can any body tell me about standard report to see the output of VLPOD transaction.Full points for the correct solution.Hi,
Try the t-code VLPODL, hope can help you!
Good day
Tao -
Im using xcode 4.6 and im having problems reading files using the fopen function in c
Im using xcode 4.6 and im having problems reading files using the fopen function in c
Yes, but that would not cause the "build failed" message.
right I missed that part. Looks like two problems then.
// main.m
// ASCTestFopen
// Created by Frank Caggiano on 3/2/13.
// Copyright (c) 2013 Frank Caggiano. All rights reserved.
#import <Foundation/Foundation.h>
#include <stdio.h>
int main(int argc, const char * argv[])
@autoreleasepool {
FILE *fp, *fopen();
// insert code here...
if((fp = fopen("~/test.txt","r")) == NULL)
NSLog(@"open failed");
return 0;
This will compile ad run in Xcode with a project type of comand line tool -
Apple should make a macBook where the screen can turn around and become touch screen, for easier use. especially for when i go to uni
Why touch and swivel screens arent a good idea on a laptop:
The so-called Gorilla arm: Gorilla arm is a term describing the tired arms users get after reaching out and touching a screen for a long time.
Added thickness: Touch screen panels are usually thicker than non-touch ones—especially if the touch panel has an active digitizer for pen support.
Possibly shorter battery life: Touch screens require more power. Laptop Magazine compared a couple of touch screen laptops with their non-touch counterparts (same model and size) and found that the non-touch laptops lasted over an hour longer.
Easy to break: Swivel screens are notoriously prone to break, especially the hinge and the cable that feeds the screen from the logic board which is being constantly twisted.
And thats what the Ipad is for. -
Revision: 13113
Revision: 13113
Author: [email protected]
Date: 2009-12-21 01:08:10 -0800 (Mon, 21 Dec 2009)
Log Message:
Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.
Modified Paths:
osmf/trunk/libs/ChromeLibrary/.flexLibProperties
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/ScrubBar.as
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/URLInput.as
Added Paths:
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/Fonts.as
Removed Paths:
osmf/trunk/libs/ChromeLibrary/assets/images/stop_up.png_1Your site was built using tables, whose sizes are defined in your site.
If we look at your first table definition, we can see:
<table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
everything else in your website.
And that is why everyone is saying, "Start Over!"
I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
properly if I'm adding text and pictures that need to line up with each other.
You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
money well-spent.
I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
think you may have chosen that route. -
Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file was created on a MAC and I am trying to open it on a MAC. Any/all advice is greatly appreciated as I am up against a deadline with this unopened file! Many thanks in advance, Diane
There's a good chance the file is corrupt. As whomever sent it to you to verify it opens on their end.
Maybe you are looking for
-
Quicktime does not work with iphoto
Quicktime no longer opens when I click on a movie in iPhoto... Anyone know why?
-
When are you going to fix the problems with this iOs7 ????
since I've downloaded iOs7 - everything is a SLOW-MO!!! And you can't scale your photos for wallpaper.. Totally disappointed with iOs7
-
Unable to create new domain for ORM in Weblogic 8.1
Hi, I have installed Oracle Role Manager(ORM) 10.1.4 and to run ORM in weblogic i have to create a new domain for ORM. I tried to create a new domain in weblogic 8.1 in configuration wizard by selecting the orm_createdomain_template_103.jar but i m g
-
hi.....what kind of questions will ask on Adapters in XI certification
-
Windows screen resolution question
I wonder if anyone can shed some light on this issue... I used a MacBook Pro recently to test the Windows compatibility of a CD-ROM product I'm developing. In most respects it was fine as a substitute for a test PC, but the screen didn't change resol