Using the random song function
Ive been using my iPod touch for a couple of days now but one thing's been bugging me since I got it:
I choose random title, every time I hit next it gives me a random title (perfect) but once you go into coverflow, choose a song yourself and hit next (or the song is over) it stays within the album. I dont want that. Is there any way to change this behaviour?
Hi Afreen,
Thanks for your answer.
I've had a look at the example.
I am very new to this kind of stuff so please bear with me.
I can't quite figure out what other function apart from DAQ_Rate I should be using.
I have read the first link but in the online help it states the following
Range: -3: 20 MHz clock used as the timebase (50 ns) (E Series only).
1: 1 µs.
2: 100 kHz clock used as the timebase (200 ns) (E Series only).
2: 10 µs.
3: 100 µs.
4: 1 ms.
5: 10 ms.
Whereas the link states "Currently, it says that -3 and -1 are valid codes for the timebase parameter" which seems to conflict with what the online help says??
Also in the example it uses the high-level function WFM_Op which (from reading the document title NI-DAQ for PC
Version 6.9.1 User Manual) to output a waveform. But I am using DAQ_Rate to input a signal (not output).
For waveform generation I am using WFM_Rate.
In my code what can I substitue the call to DAQ_Rate for?
For the card I have what should the timebase and sampleInterval be if I want to input a signal which has a sample rate of say 204.8??
Similar Messages
-
downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?
You could just disable updates. Change these settings in about:config.
* app.update.auto - set to false
* app.update.enabled - set to false
You can still check for updates with the "Check for Updates" button in the About Firefox window, but it will download the update file anyway if there is an update available. You can also check which is the current release from here:
* http://sjc.mozilla.com/en-US/firefox/new/ -
Is there any way to create a circular buffer using the INSERT ARRAY function?
I saw the example using the REPLACE ARRAY function, but it uses too much CPU power on my laptop. I'm using it for a very sensitive application and saw that the INSERT ARRAY function used much less CPU power.
I am also not wiring the index on the INSERT ARRAY function so that whatever is read from the buffer is added to the array.
However, since it is not indexed, I don't know how to set the "write" index back to 0 when it reaches a certain sized array (ie 1000 elements). I was looking for an array property node, but couldn't figure out if one exists for the "current write index".
Can anyone help?
ThanksI will try to answer this question to my best understanding. I apologize if I interpreted the question wrong.
You are using the "Insert Array" vi without wiring the index. By doing that, new elements will be added (appended) to the array.
If you just want to know the current index to stop your acquisition when the array reach certain amount of elements, then you can use the "Array Size" vi to keep track of the size of the growing array. Remember that Array Size = last index + 1 because the index start at zero.
A second option is that you may want to start over the array when it hits the maximum number of elements that you will allow. If that's the case, then you may want to re-initialize the array to a NULL state by stablishing a condition (for example, when the
size of the array is 1000, re-initialize). I provided an example attached to this message showing how this can be accomplished. In the example, an 1D array grows in size using the "Insert Array" vi and inserting a random number. When the array reach 4 elements, it is re-initialized. You can expand this example by saving the array first to a file or some other holder before re-initializing the array. The example is in LabVIEW 6.
Finally, if you want to replace the current values with new values, I think you do not have other choice but to use the "Replace Array" vi.
Hope this can be of help.
Regards;
Enrique Vargas
www.vartortech.com
Attachments:
array_example.vi 20 KB -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
How do I use the Match Pattern Function to exclude only 0.000?
Hi,
I'm trying to use the mattch pattern function to find the first string in a table thats is >0. My table looks like:
1,0.000000,0.000 %2007/01/13 00:16:19 196281
1,0.000000,0.000 %2007/01/13 00:16:22 196282
1,0.831262,0.000 %2007/01/13 00:17:20 196375
2,0.811154,0.000 %2007/01/13 00:17:20 196375
If I us the paremeter "1,[~0]" It doesn't find the line 1,0.831262,0.000... which is the one that I want. I also tried :1,[0-9].+[~0] and that didn't work either. the problem is that the first digit after to 1, isn't allways going to go from 0 to 0.0 sometimes it might go from 0 to 2.??.
Thanks for the help
Matt"Matt361" <[email protected]> wrote in message news:[email protected]..
Hi,
I'm trying to use the mattch pattern function to find the first string in a table thats is >0. My table looks like:
1,0.000000,0.000 %2007/01/13 00:16:19 196281
1,0.000000,0.000 %2007/01/13 00:16:22 196282
1,0.831262,0.000 %2007/01/13 00:17:20 196375
2,0.811154,0.000 %2007/01/13 00:17:20 196375
If I us the paremeter "1,[~0]" It doesn't find the line 1,0.831262,0.000... which is the one that I want. I also tried :1,[0-9].+[~0] and that didn't work either. the problem is that the first digit after to 1, isn't allways going to go from 0 to 0.0 sometimes it might go from 0 to 2.??.
Thanks for the help
Matt
Hi,
1,[~0] matches a "1" a "," and then any character that is not "0".
1,[0-9].+[~0] matches a "1" a "," and then any character that is "0-9", any number of anything!! (1 or more) and then anything that is not "0". Note that you have to escape a . to match a ".". Like this "\.".
There is no way to check if there is anything other then a "0" in the match, from within the match pattern function. So I think you won't be able to find a pattern that does the trick.
Why not use a whileloop to find the first item? Or use the Spreadsheet String To Array, and then compare the desired row or column with the string "0.000000"? (Or replace all ,0.000000, by a string like ",NULL,", then match the pattern?)
In LabVIEW 8 there is a new Match Regular Expression function. Haven't tried it, but it should be much more powerfull then the Match Pattern function. But also much more complex.
Regards,
Wiebe. -
How can i use the going back function in Safari like it is possible in MacOS? On the Mac i can chance back to previous Websites by sweeping with two Fingers. Unfortuntely is this Not possible on the ipad. I tried with one and to fingers but it doesn't work.
The multitouch function is switched on but still Not working. What is wrong? Thx for help.To go back a web page in Safari touch the screen with one finger at the extreme left and swipe to the right.
To go forward a web page in Safari touch the screen with one finger at the extreme right and swipe to the left. -
I highlight the photos I want to share, go to Photo Mail, select the addressees and press "Next". I then get the error message: "Elements Organizer has stopped working" and I have to close the program down.
This is obviously a bug in the program and needs fixing. Has anyone else encountered it and found a solution. (I might add that the same crash happens if I try to use the "Email attachments" function.)Hi,
Are you running on a Windows system?
If so, use the windows explorer to navigate to one of the following files according to your system.
64bit system: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
32bit system: "C:\Program Files\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
Right click on that file and select Run as Administrator then try your email again.
You should only have to do this once.
Good luck
Brian -
Cannot use the F1-12 functions on my Satellite C55-A-19K
Hello there
Satellite C55-A-19K have an keyboard drivers?
I cannot use the F1-12 functions and cannot get the wireless on since its on the keyboard...
Can some 1 help please?Hi
The basic setting on these models is that the special functions on the [F1]-[F12] keys are used without [FN].
So for example activating / deactivating the touchpad is done from [F5] (not [FN] [F5])
It is also possible to change this behaviour. Setting the Function-keys to traditional mode in the BIOS will revert back to the keys used along with [FN].
So activating / deactivating the touchpad in traditional function key mode, requires [FN] [F5].
So be sure to check your function key behavoiur - if you have set it to use [FN] first or not.
And keep in mind that in case the current mode is not what you want, you may change it.
Hope this helps
BR Tom
Message was edited by: MannerhagenVPO -
Error using the ModelData.fromBinary function in the framework
I have a collada file with animation.
this is how i load and proces it:
public var loader:ColladaLoader;
public function load(url:String):void {
loader = new ColladaLoader( url );
loader.addEventListener( Event.COMPLETE, onLoaded );
private function onLoaded(event:Event):void {
manifest = loader.model.addTo( scene );
animations = loader.model.animations;
for each ( var anim:AnimationController in animations ) {
anim.bind( scene );
It all works fine!
But because the collada is a realy big file, i thought to use the fromBinary and toBinary functions.
It should be possible to do this.
private function onLoaded(event:Event):void {
//manifest = loader.model.addTo( scene );
//animations = loader.model.animations;
// create the binary
var ba:ByteArray = loader.model.toBinary();
// recreate the ModelData.
var md:ModelData = ModelData.fromBinary(ba);
// add to sceneNode.
md.addTo(scene);
But this error is thrown:
[Fault] exception, information=Error: Unsupported Element Type
this is fired somewhere from the GenericBinary classes.
Can someone (from adobe help me on this one).
Is it possible to use 'fromBinary' and 'toBinary' with collada files?
When i load a OBJ file it goes well.
Arthur.Hi,
I dont understand why would you need to use the "bpws:getVariableData" function.
When you are mapping a source-node to a target-node, it usually assigns the value in the source-node to the target-node, which is as good as using the "bpws:getVariableData" function.
So, technically speaking you need to use this function explicitly to achieve that ...
Also, if you want the instance-id, you can use the "ora:getInstanceId()" directly in the BPEL code than using it in the transformation.
Regards,
Madhu. -
Is it possible to hide the save function and only use the save as function in teststand
Hi,
When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
Is it somehow possible to "hide" the save button and only use the save as function?
Or is there another possiblity to solve my problem.
The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
What would even be great if there could be a log of what the changes were
Thx!!!1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
Hope this helps,
-Doug -
I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.
It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days. -
Using the Safe Mode function on your PlayStation 3?
i followed the steps it works fine then when i sign in within a afew seconds it cuts off and gets a red flashing light again i dont know what to do :/
RabidWalker wrote:
Using the Safe Mode function on your PlayStation 3?
Safe Mode:
The option to use Safe Mode on the PlayStation 3 was introduced if a problem occurs where it will no longer start up normally.
To use this feature the console will need to have the System Software update 2.60 (or later).
When to Use Safe Mode?
When starting up the PlayStation 3, and the XMB menu no longer appears (you may see a wavy line on the background instead).
When the PlayStation 3 is started up, nothing appears on screen.
When the PlayStation 3 is started up and you encounter the following message ‘The Hard disk’s file system is corrupted and will be restored’. When selecting ‘OK’ the system restores and restarts, however the same message appears.
When the PlayStation 3 is started up and you encounter the following message ‘The Hard disk’s database will be rebuilt’. When selecting ‘OK’ the system begins the operation and then fails (stopping the restoration of the HDD).
There is an issue after the PlayStation 3 update process is started, or a rebuilding of the database occurs.
Safe Mode procedure:
1) Ensure the PlayStation 3 is in standby mode (where the red light is apparent), and then turn the console off at the mains switch.
2) Turn the mains power on, then while in standby touch and hold the power button.
3) Keep your finger pressed on the power button (after 5 seconds you will hear a beep).
4) After 10 seconds of holding your finger on the power button, you will hear a second beep and the console will shut down (you can remove your finger).
5) Touch and hold the power button again.
6) Again hold your finger down on the button until you hear another beep after 5 seconds.
7) A number of seconds after this you will hear a double beep- you can remove your finger.
8) You will be prompted to plug your controller in and press the PS button on your controller. After doing so you will access the Safe Mode menu with a number of options.
Safe Mode Option Screen:
Restart System
Selecting this option will start up the system normally- It will also allow you to exit the Safe Mode Menu.
Restore Default Settings
Selecting this option will restore Default settings on your console (when starting the unit you will be prompted to set time, time zone etc). This option will also delete your PlayStation Network account information from the system.
Your User information will be deleted and restored- the indicator will be an asterix by your username e.g. *RabidWalker.
When logging into your user you will encounter no issues with disc based games. However when attempting to play PSN downloaded games you may encounter the message:
‘To access the system, you must activate the system.
Go to [PlayStation Network] > [Account Management] to activate this system. (80029514). ’
Follow the instruction to activate your PlayStation 3 to play downloaded games (if the system is activated, deactivate and reactivate the system)
Restore File System
This option will begin a process to repair data on your Hard Disk Drive. Therefore it will check for any corrupted data and try and recover this. It the data cannot be recovered it may be erased to ensure that it does not interfere with the operation of the PlayStation 3.
Rebuild Database
If issues continue to persist and you select this option please note that data will be removed during this process.
The following information will removed:
- Messages
- Playlists
- User changes to Information Screens
- User changes to Picture under Photos
- Video Thumbnails
- Video Playback History
- Video Resume Information
This process may take same time to complete
Restore PS3 System
The option to restore PS3 system is the same as the ‘quick format’ option on the XMB menu. It will reformat the HDD, removing all data and restoring the Hard drive to its original state.
System Update
Selecting this option will install the PlayStation 3 Update but only if the update is on an external media storage device plugged into the console.
This option can be used if any issues are encountered with the installation of the System software update.
If you have any queries regarding this or any other issues please PM me or catch me on Twitter
@RabidWalker
Rabid
-
I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.
andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie? -
I am unable to use the Live View function when working with JavaScript in Dreamweaver.
I am currently trying to set up my own website with dreamweaver and am very familiar with Java and JavaScript. However, whenever I try to use the Live View function it never lets me. Additionally, I am unable to preview my work in a browser as the option to do so is greyed out.
However, I have noticed that when using html in a project, all these functions are available. Any ideas how I can be able to use these functions?Is it possible you meant to say you were "very unfamiliar with Java and javascript" in your initial post?
Javascript doesn't do anything without an html page to affect.
Java and javascript are not the same thing, they're really not even related other than browsers can be made to render both. Java is its own programming language while javascript is basically html's helper monkey. I don't think it's even feasible to "understand javascript" without knowing html. My last post still stands, if you are coding javascript, you need an html based page to turn it into anything but plain code to a browser, so the option to view it will never come up. When you preview the page it's attached to, it will function correctly (as long as it has been attached to the page correctly).
Java on the other hand can create programs that run without a browser at all and I've never gotten close to touching that monster.
You may need to explain what you're trying to do and post the code here to get the help you need. -
Attempting to connect my MacBook to my 4s iPhone. I have had them connected in the past to use the "hands off" function. Today it tells me "network unavailable" make sure network access is enabled. I don't know what to do. I love the hands off feature as my iPhone is never with me when on my mac! I'm not sure what to do. Both are "discoverable" via bluetooth and show up on each device but when I try to connect it says "network unavailable". HELP!
An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458
Maybe you are looking for
-
Document Viewer: Show document inplace using "view_document_from_table"
Hello, i am trying to show a pdf-document on a dynpro using i_io_document_viewer. As long as I don't activate "show_inplace", it works fine. The document is correctly shown in an external browser window. So the parameters i export seem to be allright
-
I ran pacman -S Xorg, but then did a Ctrl+z and started links to browse for a while. I did the stupid mistake to invoke the OS shell from links. Now issuing 'fg' does not bring me back to pacman! But I know it is running, because I cannot start it. H
-
Pcmanfm only works after I kill it in LXDE
Hello all! I've been having this problem with pcmanfm in LXDE. If I try to start pcmanfm before running a pkill, it simply won't start. I can try to open it in the terminal, panel, whatever and it doesn't work. I was having problems with it being una
-
Missing component into the application
i missing the conponent into the application but i have the package into the schema. what4s the workarrounf for recover this component??
-
Report server's status is "coming up"
I installed the 9iAS Release 2, the report server can start, but sometimes hang after server reports process. Then I applied Core Patchsets 2542920 and NC 2790613, but I'm not able to start the reports server anymore. When I enter the OEM and choose