Using Timer with EasyTab

Hello,
I run into a problem,
I have a main panel with some EasyTabs on it and also a Timer (which is placed on the main panel, not on one of the easytabs...).
The timer is set to every 100 miliseconds, and sends a message (like 20 bytes) over the serial RS232 port.
The problem occurres while the application is running and I am leafing through the tabs, after a short while the application breaks at RunUserInterface(). and reports FATAL RUN TIME ERROR.
I believe there is a connection between the easytabs and the timer because when I disable only the timer (while the rest of the app. continues) it does not happend.
Any help?
Thanks.

disa,
This doesn't seem to be an issue related to the RS232 side but to verify it would be worthy to note what happens when the serial portion of the system is taken out. If the problem still occurs then the issue likely is one that should be posted to our LabWindows/CVI forum.
Craig H.
NI Applications Engineering

Similar Messages

Using Timer with buttons

Hello,
I searched in the forum how to use a timer in Siena and found lots of tips.
I don't know why, but it doesn't work in my app. For example I try the answer from thread "Countdown Timer". I copied everything in my app but it doesn't work :(
I need a stop button and a start button for my timer1. Can someone please help me.
Edit: I think I need maybe a little bit more help:
The App have four screens. At the second is the timer. When I go to an other screen timer should not stop! At the screens two, three and four, I need a start and a stop button.
When the game begin I start the timer. When there are breaks I have to stop.
I need mm:ss and the timer should stop at 60:00
Thanks
Joogel

I think I need it like that:
At the normal screen is the timer and a start and stop button. When I change the screen and the timer is running, at the next screen a hidden timer start by changing the screen. When the timer stop, so at the next page the timer also stop. At this second
screen there have to be also a start and stop button.
The value of the timer at the second screen have to add to the time of the third screen. When the timer at screen two is running, the timer at first screen have to start by changing the screen. When it stop so the timer at screen one also stop.
And the same with a third screen. And at 60min it's ending.
I hope I describe it exactly.
Can someone please help me.
Thank you.

How do you use Time Machine with more then one mac

I just bought a new external hard drive and want to back up my iMac & MacBook Pro using Time Machine. But I do not want to use my airport network.
I will keep the hard drive connected to the iMac, but want to, as needed, plug my MacBook Pro into the Hard drive to back up.
Is this possible? Do I have first partition the new backup hard drive?
Any help is appreciated... Jim

Ok... I am back again.
I decided to plug my backup drive into the USB port on the Airport extreme.
On my Macbook Pro, which I connect wirelessly, I was able to start Time Machine... Time Machine saw the backup drive and did a backup.. Yes it took a long time Anyway all is cool with that.
My iMac is connected to the Airport Extreme by Ethernet. On the iMac when I started Time Machine, it does not see the backup hard drive. I can see and share the hard drive... works fine. But no luck with TM seeing the hard drive on the iMac.
Questions is will Time Machine work with a computer that is connected to airport extreme by ethernet. If yes how o you set it up and what might be wrong??
I might mention that the reason I have the iMac connected with an ethernet cable and not wirelessly is because the iMac does not stay connected well to the internet and when it is connected has a very slow connection. My MacBook Pro is all the way across the house and has a great connection.
I have guessed the slow connection was because the Airport Extreme sits right next to the iMac and maybe there is some kind of interference.
Thanks.... any help is appreciated.

HT201250 I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was?

I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!

Welcome to the Apple Support Communities
When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
Click on the Wireless tab at the top of the page
Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
Then, you must power off your entire network...all devices....in any order that you want
Wait a minute
Start your modem/router first and let it run a minute
Start the Time Capsule and let it run a minute
Keep starting devices one at a time until everything is powered up
If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
Open System Preferences (gear icon) on the dock
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backup or, it might be Use Disk
Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

Using TIME MACHINE with a TIME CAPSULE

There's often a bit of confusion about this terminology: +*Time Machine+* vs. +*Time Capsule:+*
_*Time Machine*_ is Apple software that performs backups, to an external HD, a Time Capsule, etc.; and also allows you to browse and restore from them. It comes with Leopard and Snow Leopard, but cannot run on any previous versions of OSX.
A _*Time Capsule*_ is a piece of Apple hardware that combines a wireless router and hard drive, that can be used for Time Machine backups and/or other data.
Most Time Machine questions & problems are not unique to Time Capsules. For those, or if you don't find what you need here, try one of these:
Time Machine - Frequently Asked Questions
Time Machine - Troubleshooting
They can also be found in the *User Contributed Tips* section of both +Time Machine+ forums:
Mac OS X v10.5 Leopard > Time Machine
Mac OS X v10.6 Snow Leopard > Time Machine
Contents
|
QUESTIONS
*Q1. How do I set up Time Machine to back up to my Time Capsule?*
*Q2. How do I set up Time Machine to back up to a USB drive connected to my Time Capsule?*
*Q3. Can I use my Time Capsule for Time Machine backups AND other data?*
*Q4. My Time Capsule is too small to back-up my Mac(s). Now what?*
*Q5. Should I delete backups? If so, how?*
*Q6. How do I back-up my Time Capsule and/or USB drive(s) connected to it?*
If you don't see your question here, try the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
|
PROBLEMS
*P1. The Backup disk image could not be created.*
*P2. Time Machine could not complete the backup . . sparsebundle could not be accessed. (Error 109).*
If you don't see your problem here, try the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
QUESTIONS
|
_*Q1. How do I set up Time Machine to back up to my Time Capsule?*_
|
First, set up your Time Capsule via +Airport Utility.+ Keep the name you assign to it, your Computer, and your network short (under 25 characters), and avoid embedded spaces, special characters, and punctuation (see item #P1 below for details). Make sure your Mac can connect via an Ethernet cable, if at all possible, as well as wirelessly.
The setup and first backup (of your entire system) will be much faster if you connect via Ethernet.
|
a. If the +Time Machine+ icon isn't already in your Dock, drag it there from your Applications folder. See below for more about it's use.
b. Right-click it and select +Open Time Machine Preferences,+ click the +Show Time Machine status in the menu bar+ box (see below), then click +Select Disk+ (on Leopard, this button will be either +Choose Backup Disk+ or +Change Disk).+
c. A list of possible destinations will appear. It should include your Time Capsule (with the name you gave it via Airport Utility), and may show other internal or external drives as well. Select your Time Capsule and click the +Use for Backup+ button.
d. A prompt for your name and password will appear. In some cases there won't be a Name field, but if there is, enter your short user name. Also enter the password you set up for the Time Capsule via Airport Utility, then click the Connect button.
e. A 120-second countdown to the start of your first backup will appear in the +Next Backup+ area of the TM Preference panel.
|
Note that this first backup will copy the entire contents of your system, except for a few things that are skipped automatically, such as system work files, most caches, your logs, trash, etc., and anything else you may have excluded (see #10 and #11 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum). So it will be rather lengthy, depending on how much data is on your system, whether you're connected via Ethernet or WIFI, and if WIFI, how good the signal is.
You can continue to use your Mac while TM is backing-up, and you can even cancel a backup if necessary, but to make this first full backup as fast as possible, try not to overload your Mac or cancel the backup.
|
_*The Time Machine Icons in your Menubar and/or Dock*_
|
In the steps above, you dragged the TM Application's icon into your Dock, and clicked the +Show Time Machine status in the menu bar+ box.
For detailed info about them, see question #24 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
+Go to Top+
_*Q2. How do I set up Time Machine to back up to a USB drive connected to my Time Capsule?*_
|
Mostly the way you set it up to use the Time Capsule's internal HD.
But first, attach the drive directly to your Mac, and erase and format it per the instructions in #5 of the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum. Note, however, that it doesn't matter whether you use the +Mac OS Extended (Journaled)+ or +Mac OS Extended (Case-sensitive, journaled)+ Format, since Time Machine will put your backups in a sparse bundle that's case-sensitive. You cannot change that.
Unlike the Time Capsule's disk, you can partition the USB drive. That's highly recommended if you're going to be putting other data there, so the backups don't completely fill the disk (but be aware that Time Machine cannot back that "other" data up. See question #Q6 below).
If you're backing-up multiple Macs to the same drive, you can make one partition for each, but it's not as helpful on a network drive, because each Mac's backups will be in a separate sparse bundle. So you can let them share the disk or a partition.
Also note that if you've been doing backups to an external disk connected directly to your Mac, you cannot continue the same set of backups when you connect it to your Time Capsule. They are stored differently, and Time Machine will put them in a sparse bundle, alongside but *completely separate from* the backups made locally, and the first backup will be a full backup of your entire system.
Once the USB disk is set up the way you want it, use the setup procedure in question #Q1 above, but in step (c), select the USB drive/partition, not the Time Capsule's internal HD.
*RAID Sets connected to a Time Capsule:*
|
Time Machine will back up to a +Hardware Mirrored RAID set,+ also called +RAID 1,+ (sold that way, with multiple drives in the same enclosure). However, if you partition the +Hardware Mirrored RAID set,+ once you start using it with TIme Machine, you cannot change the sizes later and continue to back up to the same set of backups.
While you can connect multiple USB drives to a Time Capsule via a USB hub (a powered one is best), Time Machine +*will not+* back up to a +software Mirrored RAID+ set (where you combine the drives into a single volume via Disk Utility).
+Go to Top+
_*Q3. Can I use my Time Capsule for Time Machine backups and other data?*_
|
You can put other data on your Time Capsule's internal HD, but there are three major considerations:
Especially for things like photos and videos, access may be too slow for convenient viewing, and worse for editing. So test this a bit before you decide what to put there.
Time Machine cannot back-up that other data, so you'll need some other method. See question #Q6 below.
Time Machine will, by design, fill up all the space available to it, so there may be a conflict between the sparse bundle it puts your backups in, and the other data. There is a workaround, to "reserve" some space there, by creating a disk image of the desired size and storing your data there, but it's a bit cumbersome, and two Macs can't share it at the same time.
An alternative is to connect a USB drive to your Time Capsule. Then you can back up to the TC's disk and use the USB drive for other data, or vice-versa. But note that Time Machine cannot back-up the USB drive while it's connected to the TC (see question #Q6 below).
If you want to reserve space on the TC's internal disk, here's how:
|
a. Start the +Disk Utility+ app (in your Applications/Utilities folder). Click the +New Image+ icon in the toolbar (or select +File > New > Blank Disk Image+ from the menubar). If the little arrow to the right of the "Save As" box points down, click it so it points up.
b. Give it a name in the "Save as" box. This name will appear on the TC's disk, with ".dmg" appended. (Similar to the way the sparse bundle containing your Time Machine backups appears, with ".sparsebundle" appended).
c. Click your TC in the sidebar. It may take a few moments for Disk Utility to recognize it, and show it in the center pane.
d. In that center pane, select the blue Share folder for your +Time Capsule+ (you may need to scroll down, or enlarge the window, to see it). Once selected, you'll see any existing disk images in the right pane.
e. Give the Image a name. This name will appear on your desktop and/or Finder sidebar when you mount the .dmg by double-clicking it, if you have the +External Disks+ box checked in +Finder > Preferences > General+ or +Finder > Preferences > Sidebar.+
f. Select the Size for the amount of space you want to reserve, either one of the pre-sets or Custom which allows any size. Avoid taking all the remaining space for the disk image, as Time Machine needs a bit of room to operate. Also note that if very little space is left, it will begin deleting old backups very soon, to make room for new ones.
g. Select the desired Format, probably the default of +Mac OS Extended (Journaled).+
h. If you want it encrypted, select the desired type.
i. Select single partition, either GUID or +Apple Partition Map.+
j. Select +Read/Write disk image+ for Image Format.
k. Click the Create button. The larger the image size, the longer this will take.
|
When complete, the new disk image will be automatically mounted on your Mac's desktop, ready to receive the files you want to move into it. (When you first open a disk image, there may not be a sidebar and/or toolbar; if so, select +View > Show Toolbar+ from the Finder menubar.)
To access this disk image from another computer, you must first eject it from this one, since only one can mount it at a time. Otherwise, the other one will see a message that the disk image is "Temporarily unavailable."
Note that you may be able to change the size of the disk image later, via +Images > Resize+ from the Disk Utility menubar (while the disk image is not mounted or selected in Disk Utility's sidebar).
+Go to Top+
_*Q4. My Time Capsule is too small to back-up my Mac(s). Now what?*_
|
You can attach a USB drive to your Time Capsule. Then you can back up to the USB drive instead of the Time Capsule's internal HD. If you have multiple Macs, you can back some up to the TC's internal drive, and others to the USB drive.
If you need even more space, you can connect multiple USB drives via a hub (a powered one is usually best), and back up different Macs to each. What you cannot do, however, is have one Mac's backups continue from the Time Capsule's internal HD to a USB drive connected to it, or have the backups for any one Mac "span" two drives.
The exception is, you can connect two (or more) drives that are in a +concatenated RAID+ set (sometimes called +RAID 0).+ In that configuration, all the drives in the set are treated as a single volume (see +Concatenated RAID+ in the Help for Disk Utility for details). This configuration may cause some other difficulties; once they're in a RAID set, you cannot connect any drive to your Mac separately -- it's all or none. And if one drive fails, you risk losing everything on all the drives in the set.
See question #Q2 above for setup instructions for backing-up to the USB drive.
+Go to Top+
_*Q5. Should I delete backups? If so, how?*_
|
It depends on exactly what you want to do, and why.
Under normal circumstances, you shouldn't have to delete anything. TM automatically "thins" (deletes) backups every time it does a new backup, on the following schedule:
"Hourly" backups after 24 hours (except the first of the day, which is a "Daily" backup).
"Daily" backups after a month (except the first of each week, which is a "Weekly" backup.)
"Weekly" backups are kept until TM needs the space for new backups; then one or more of the oldest weeklies will be deleted.
However, TM will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup. So all that's actually deleted are copies of items whose originals were changed or deleted before the next remaining backup.
But if you do need to delete backups, here's how:
To delete individual backups, or all backups of selected item(s), see #12 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
To delete everything on the Time Capsule's internal HD, use +*Airport Utility.+* Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.
To delete everything on a connected USB drive/partition, you can delete via the Finder, but that may take a very long time. It may be faster to disconnect it from your Time Capsule, connect it directly to your Mac, and use Disk Utility (in your Applications/Utilities folder) to erase the disk/partition.
To delete all the backups for one Mac, without disturbing anything else on the Time Capsule's internal disk, open the TC via the Finder and delete the sparse bundle associated with that Mac.
To delete all the backups for one Mac, without disturbing anything else on a connected USB drive, either open the USB drive via the Finder and delete the sparse bundle associated with that Mac, or disconnect the drive from the TC, connect it directly to your Mac, and delete the sparse bundle from there.
+Go to Top+
_*Q6. How do I back-up my Time Capsule and/or attached USB drive(s)?*_
|
That depends to some extent on what you want to back up, and where it is.
It's generally not a good idea to try to back-up your Time Machine backups. If there's a problem with them, it will be copied to (and perhaps magnified on) the copy.
A better solution is probably to use either Time Machine or a different application to make separate, independent backups of your Mac, to a different destination. A portable external hard drive is great for this; you can periodically connect it to your Mac, make a backup, then take it to a secure off-site location, so you're protected against fire, flood, theft, direct lightning strike on your power lines, etc. If you use Time Machine for this, you'll have to use the disk selection process each time you want to switch, via +Time Machine Preferences.+
Many folks use the CarbonCopyCloner or SuperDuper! apps to make "bootable clones" of their internal HD to an external HD. While these usually don't have "archived" copies of previous versions of things you've changed or deleted, you can boot and run your Mac from them if your internal HD fails. Your Mac may run a bit slower, but it will be usable. Both are easily found via Google.
Since Time Machine cannot back up your Time Capsule's internal hard drive, or a USB drive connected to it, if you have other data there, you'll need a different method to back up that other data.
In a pinch, you can disconnect a USB drive from your Time Capsule, attach it to your Mac, and copy or back it up that way.
|
There is a procedure that will let you "archive" the TC's internal disk to a USB drive connected to it.
But it's not quick, since since the data must be read from the TC's internal disk to your Mac, then sent *back through the Time Capsule* to the connected USB drive. And it's "all or nothing" -- you can only use this procedure to copy the entire contents.
All users will be disconnected from both the internal HD and the connected USB disk (but the network will remain usable).
Attach a USB drive with at least as much free space as the total amount of data on the TC's internal HD (see #5 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum, for formatting instructions).
Turn Time Machine "Off" via +Time Machine Preferences.+ Stop all processes that may be accessing the Time Capsule's disk. If possible, connect your Mac to the Time Capsule with an Ethernet cable -- it will still be slow, but faster than WIFI.
Then follow this Apple procedure: Using AirPort Utility 5.3.1 or later to make a copy of the Time Capsule disk.
+Go to Top+
PROBLEMS
|
_*P1. The Backup disk image could not be created.*_
|
Oddly enough, Time Machine can be rather picky about the way certain things are named.
Check your +*Computer Name*+ at the top of the System Preferences > Sharing panel.
It must not be blank; it should not be more than 25 characters long; and you should avoid punctuation, spaces, and special characters.
After changing it, click the Edit button and make the corresponding change to the +*Local Hostname.+*
If that doesn't help, apply the same rules to the name of your Time Capsule and Network, via +Airport Utility.+
+Go to Top+
_*P2. Time Machine could not complete the backup .. sparsebundle could not be accessed. (Error 109).*_
|
The sparsebundle containing your backups is corrupted.
Try Repairing it, per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
If the sparsebundle is on your Time Capsule's internal HD, and Disk Utility can't fix it, your only option is to delete it (or erase the TC's disk), and let Time Machine start over. You may be able to prevent this from happening again by changing the names per problem #P1 above.
If the sparsebundle is on a USB drive connected to your Time Capsule, and Disk Utility can't fix it, it's possible a heavy-duty 3rd-party +Disk Repair+ application, such as +Disk Warrior+ can. (You'll have to connect the drive directly to your Mac.) These are not cheap, and there's no guarantee they can fix it. Be certain whatever you use is compatible with your OS. For Disk Warrior, you need at least version 4.1.1 for Leopard, 4.2 for Snow Leopard.
+Go to Top+

This tip is ready for consideration.
It is an update to the current Tip at: http://discussions.apple.com/thread.jspa?threadID=2296894
Changes:
Q1: replaced info about the TM icons with a link to the TM FAQ tip.
Q2: added info about RAID sets attached to a TC
Q6: reworded a bit and replaced last paragraph with a link to the Apple article.

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

Can you use 2 bluetooth headphones at the same time with ipad?

I'd like to purchase 2 bluetooth headsets for my elderly parents to use with their ipad for FaceTime. They both typically use FaceTime at the same time to talk to their grandkids, but have difficulty hearing just using the ipad speaker. Is it possible to utilize 2 bluetooth headsets at the same time with ipad. If not, what's the best alternative? (Wired headsets will not work as they also are often caring for another young grandchild at the time and can't be tethered)

You can only pair to one BT headset at a time.
As an alternative, have you considered a BT speaker so you can increase the volume of the Facetime call?

How can I use Time Machine with my existing network attached storage drives

I am a new mac user switching over from windows and have an extensive amount of existing equipment including 2 network attached storage devices (Buffalo Technologies). I would like to use these with Time Machine, but can not figure out how to do it. When I enter time machine setup it does not show these drives while the Finder does.

As of right now we are all SOL unless you own a Time Capsule. At the very least I wish apple would offer some kind of trade-up if they are not going to release a software update.
It really doesn't make any sense why we can't do this with a standard AEBS. Any fix should just be a matter of software, and while technically apple covered its butt with that little "subject to change" disclaimer on the leopard preview page, pulling it at the last minute and expecting those who believed their advertisement to buy another device that does the exact same thing for more money is just wrong. Give us a break apple, tell us your at least working on a fix, its the right thing to do.

Can I use more than one bluetooth device at a time with my iphone4

Can I use more than one bluetooth device at a time with my iphone4

Anthony
I have a Plantronics 975 earpiece that works very well with my Razr. I
just got a Panasonic KX-TG7873S phone system for my home, it has a
"Link-to-Cell" cellular convergence solution, from what I understand it is
just Bluetooth enabled. I have paired both device with my Razr. In
settings, Bluetooth setting, both device show. But only one device can
connect at a time. If my Plantronics is connected and I choose the
Panasonic device, the Plantronics device disconnects and the Panasonic
device then says it is connected. Both devices work when they
are connected. Is it because they are both "headsets"?
So, to have to remember to connect to one or the other device, depending on
weather I am coming or going is not practical.
On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Using Timer with EasyTab

Similar Messages

Maybe you are looking for