Using WCS to find WPA1 clients

We recently installed WLC and converted our AP's to LWAPP. I need to find a way to run a report on associated clients that are still using Policy Type of WPA1. I need this list to hand over to desktop to have them updated.

"WPA Compatibility Mode" would allow the WLAN client to use WPAv1 type handshaking, but would still be bound to the AES cipher suite by
default. Then if "Allow WPA2 TKIP Clients" was added to the WLAN configuration, the cipher suite of TKIP (non AES) would be allowed to
also coexist. Thus best I could tell from a pragmatic sense, one realy needs to enable both of these options for most "WPA mixed mode"
Operation scenarios.
For the configuration for the WCS follow the URL :
http://www.cisco.com/en/US/docs/wireless/wcs/4.0/configuration/guide/wcssol.html#wp1070759

Similar Messages

Could not find a client that is able to lunch the selection

Hi
I am new in j2ee. I am using eclipse 3.1 with tomcat 5.0.28 and jboss 3.2.3. I am trying to do application with bmp_ejb. I think my problem is in deploying. My ejb has got a entitybean(ViewVivendasBean) and two interfaces (ViewViviendasLocal and ViewViviendasHome). To deploy I have changed some files.
In tomcat the file web.xml, I have appended this:
<resource-ref>
     <description> Tabla de conexiones para aae
     </description>
     <res-ref-name>
          jdbc/XXXX
     </res-ref-name>
     <res-type>
          javax.sql.Datasource
     </res-type>
     <res-auth>
          Container
     </res-auth>
</resource-ref>In the file server.xml, I've appended
<Context>
     <Resource name = "jdbc/XXXX" auth = "Container"
                 type = "javax.sql.DataSource"/>
     <ResourceParams name = "jdbc/XXXX">
          <parameter>
               <name>username</name>
               <value>USER</value>
          </parameter>>
          <parameter>
               <name>password</name>
               <value>11111</value>
          </parameter>
          <parameter>
               <name>driverClassPath</name>
               <value>com.microsoft.jdbc.sqlserver.SQLServerDriver</value>
          </parameter>
          <parameter>
               <name>url</name>
               <value>jdbc:microsoft:sqlserver://yyyy.com:1433/web</value>
          </parameter>
          <parameter>
               <name>maxActive</name>
               <value>20</value>
          </parameter>
          <parameter>
               <name>maxIdle</name>
               <value>5</value>
          </parameter>
     </ResourceParams>
</Context>In the file ejb-jar.xml, I've appended
<ejb-jar>
         <description>Implementa ViewViviendas</description>
         <display-name>ViewViviendasEJB </display-name>
         <enterprise-beans>
     <entity>
          <description>Version 0.1</description>
          <display-name></display-name>
          <ejb-name>ViewViviendasBean</ejb-name>
          <home>ejb.ViewViviendasHome</home>
          <remote>ejb.ViewViviendasLocal</remote>
          <ejb-class>ejb.ViewViviendasBean</ejb-class>
          <persistence-type>Bean</persistence-type>
          <prim-key-class>java.lang.String</prim-key-class>
           <reentrant>False</reentrant>
         </entity>
     </enterprise-beans>
     <assembly-descriptor>
              <container-transaction>
          <method>
               <ejbname>ViewViviendasBean</ejb-name>
               <method-name>"*"</method-name></method>
              <trans-attribute>Required</trans-attribute>
              </container-transaction>
     </assembly-descriptor>
</ejb-jar>After I create a file in format html "index.html" to test. And gime this error "Could not find a client that is able to lunch the selection"
Perhaps , Do I have got to deploy also this file index.html?.
Any Idea?
thanks in advanced

Hi
A question. The deploy is right?
thank you

NoClassdefFound Problem using EJB as web service client

Hello there, I am trying to use a MDB as a web service client. The architecture,
briefly is in the form of a java program communicating with a MDB via JMS, the
MDB gets the data from some external server via SOAP. I am using JBuilder to generate
the client side classes choosing the Axis framework. When my MDB is trying to
bind using locator.getPort() it throws an error as follows:
java.lang.NoClassDefFoundError: org.apache.axis.client.AxisClient. java.lang.NoClassDefFoundError:
org.apache.axis.client.AxisClient at org.apache.axis.client.Service.getAxisClient()Lorg.apache.axis.client
AxisClient;(Service.java:143) at org.apache.axis.client.Service.<init>()V(Service.java:152)
Note that it works fine if I use the web services client as a standalone java
program(no weblogic ). I tried putting the Axis.jar file as well as the relevant
files from this jar file(JBuilder's feature) in the EJB module that is deployed,
of no avail. Following is the classloader printed from the EJB's onMessage method
if needed for better understanding
weblogic.utils.classloaders.GenericClassLoader@afdd3a finder: weblogic.utils.cla
ssloaders.MultiClassFinder@20d7479 annotation: SecurityEJBModule@
Any help will be appreciated

Slava, I did exactly that and it worked! I wish I had seen your reply before.
Thanks
"Slava Imeshev" <[email protected]> wrote:
>
"Santosh" <[email protected]> wrote in message news:405074c7$[email protected]..
Hello there, I am trying to use a MDB as a web service client. Thearchitecture,
briefly is in the form of a java program communicating with a MDB viaJMS, the
MDB gets the data from some external server via SOAP. I am using JBuilderto generate
the client side classes choosing the Axis framework. When my MDB istrying to
bind using locator.getPort() it throws an error as follows:
java.lang.NoClassDefFoundError: org.apache.axis.client.AxisClient.java.lang.NoClassDefFoundError:
org.apache.axis.client.AxisClient at org.apache.axis.client.Service.getAxisClient()Lorg.apache.axis.client
AxisClient;(Service.java:143) at org.apache.axis.client.Service.<init>()V(Service.java:152)
Note that it works fine if I use the web services client as a standalonejava
program(no weblogic ). I tried putting the Axis.jar file as well asthe relevant
files from this jar file(JBuilder's feature) in the EJB module thatis deployed,
of no avail. Following is the classloader printed from the EJB's onMessagemethod
if needed for better understandingYou need to package all Axis jars and dependancoes into the EAR and
refer tham
in your ejb-jar MANIFEST.MF. If you are running weblogic 8.1, you may
just put them
into APP-INF/lib. Than you won't need to modify manifest.
Hope this helps.
Regards,
Slava Imeshev

New Mac botnet malware uses Reddit to find out what servers to connect to?

Hi all,
I have come across these warnings over the last few days regarding a Mac botnet malware? The Independent published it
17,000 Macs recruited into malware botnet, with a little help from Reddit
Researchers at Russian anti-virus company Dr Web believe that they have uncovered a new botnet, which has recruited thousands of Mac computers. According to their report, the sophisticated malware – which they have dubbed Mac.BackDoor.iWorm – has infected more than 17,000 computers running OS X. Unfortunately, what isn’t presently documented is how the malware spreads – but the consequences can clearly be serious.Like any computers that have been recruited into a botnet, Macs that have been hijacked in this attack could have information stolen from them, further malware planted upon them, or be used to spread more malware or launch spam campaigns and denial-of-service attacks.Fascinatingly, compromised computers receive commands from servers under the control of botmasters, using information posted in messages on Reddit as a navigational aid:Then Mac.BackDoor.iWorm opens a port on an infected computer and awaits an incoming connection. It sends a request to a remote site to acquire a list of control servers, and then connects to the remote servers and waits for instructions.It is worth mentioning that in order to acquire a control server address list, the bot uses the search service at reddit.com, and — as a search query — specifies hexadecimal values of the first 8 bytes of the MD5 hash of the current date. The reddit.com search returns a web page containing a list of botnet C&C servers and ports published by criminals in comments to the post minecraftserverlists under the account vtnhiaovyd.
this is what one forum member on Reddit said.
'Basically, the worm installs itself to look like an application to the operating system and hooks into the automatic startup so that it will launch each time the computer is started.
Once it's running, it does an inventory of what applications you have installed.
It then goes out to reddit to find out where the current botnet command and control servers are located. It then connects to the command and control server to ask for instructions.
The likely reason it looks at the applications that are installed is so that it can use those applications to carry out the botnet's commands (e.g., use Mail to send spam as you.)'
another said
'it is a Trojan packed in a minecraft expansion or custom server or client. Exploiting the same flaw as the flashback worm from 2012."
'another saidUnfortunately, the security analysts fail to mention (or simply don’t know) how the virus is spreading into users’ Macs. Hopefully, this information comes to light soon so Mac users can know what to look out for. Once identified, Apple can add the virus to its security blacklists (which are refreshed nightly) to give some automatic protection to its user base.'
Anyone know about this and is there a way to detect it and then if it is present get rid?
http://9to5mac.com/2014/10/02/new-mac-botnet-malware-uses-reddit-to-find-out-wha t-servers-to-connect-to/
http://www.independent.co.uk/life-style/gadgets-and-tech/hackers-are-using-reddi t-to-control-17000-apple-computers-9773032.html
http://grahamcluley.com/2014/10/mac-malware-botnet-reddit/

seems it has been solved... found this on Mac Rumours
'In an effort to address the threat, Apple has now updated its "Xprotect" anti-malware system to recognize two different variants of the iWorm malware and prevent them from being installed on users' machines. '
'It has been discovered how the botnet is installed. You have to download a pirated app, such as Photoshop, and then give the pirated installer administrator privileges.
No amount of malware security can fix stupid.'
EDIT: Link to evidence: http://www.thesafemac.com/iworm-method-of-infection-found/ (http://www.thesafemac.com/iworm-method-of-infection-found/)'

Using WCS without AP

I did some searching but couldnt find what i was looking for so figured i would ask for help.
We use our WCS to deploy software and config on our WLC's (approx 100)
We don't need to manage/monitor the Access Points on our WCS only the WLC are needed.
Is there a way to not have the AP add on a WCS when you add a WLC ?
If not is there another Cisco tools wich can do the job ? Manage centraly only WLC (without the AP) ?
Thanks in advance for your help.

Hmmm... Its like this.. The time we add the WLC to the WCS , all the AP will get added.. on top of that.. when we upgrade the WLC code, the AP registered to the WLC wil also reload the gets the latest software version as well..
Wat i meant was.. instead of monitoring the WLC from the WCS u can use SNMP and SNMP WALK..
In case if you want to upgrade the WLC using WCS then we need the WCS but we cannot opt out APs though..
Regards
Surendra

I am trying to use iCloud to find my stolen iPod, but it says I don't have any devices with my account, help?

I had my iPod stolen out of my school bag. I was told to use iCloud to find it. But when i got onto iCloud it said something like i don't have any devices set up or something. Any idea of what i can do to find my iPod location?

On your iPod Touch.
iCloud- Find My iPhone overview
Find My iPhone
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

While using Google to find a website, the catagories appear, but when I click on one of the links, it takes me to a different website. Most of the time the sites seem to be like larger versions of pop-ups, and are all advertising or trying to sell somethi

When using Google to find a website, Google lists the various sites, but when I click on them, the take me to a larger version of a pop-up. Most are advertising sites that are trying to seel something
== This happened ==
Every time Firefox opened
== A few days ago

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

Using JarSettings to generate EJB client jar, but supported classes missed

Appreciated for any comments in advance.
I am using @jarSetting to generate EJB client jar file from workshop 9.2. The remote method of EJB has one input parameter that is defined as an interface. The interface is included in client jar, but the implementation of this interface is not.
Please advise how I can add the implementation of this interface to client jar?
Best Regards,
James

Hi James,
I believe the algorithm for creating the client jar is to simply inspect the EJB interfaces using reflection and to include all user defined classes and exceptions that are referenced by the interfaces. In your case, it sounds like a class is not being included because it is not directly referenced by one of the EJB interfaces.
I think the client jar creation algorithm can be described as "best effort" and unfortunately, it does not always end up including all classes needed by the client. I would recommend you add the additional classes manually using the jar tool.
- Matt

How do I use Spotlight to find the location of a document?

Spotlight used to show the location of document when I hovered the mouse over an item in its list. It no longer does this. Now it tells me that a document exists and allows me to open the document, but doesn't tell me where to find the document. How do I use Spotlight to find the location of a document?

Hi Thomas ...
Open System Preferences > Spotlight then select the Search Results tab.
Select the all the categories for the search results you want.
Restart your Mac.
If that didn't help the Spotlight preferences may be corrupted.
Go to ~/LIbrary/Preferences
Move the com.apple.spotlight.plist file from the Preferences folder to the Trash.
Try Spotlight.
edited by: cs

Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
I tried every possible mail server settings including the following:
IMAP information for the incoming mail server
Server name: imap.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 993
Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
Password: Your iCloud password
SMTP information for the outgoing mail server
Server name: smtp.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 587
SMTP Authentication Required: Yes
Username: Your full iCloud email address (for example, [email protected], not emilyparker)
Password: Your iCloud password

Those are the correct settings, and they work with any email client that supports Imap.
Try again.

Using Grep to find/replace

I'm trying to find out how to use GREP in find/replace to chage the formatting of some text that comes in from a spreadsheet.
I worked out the GREP query "~b(\d\d)~b", which finds a paragraph return, followed by two digits, followed by another paragraph return
and then it is replaced by "\t $1~b", which is a tab, the two found digits and a para return.
What i need to do is to amend the query to find ANY number of digits, (which may be comma delimited: eg 23, 36, 48 ,50), and then replace with a tab + found text.
I suppose what I'm looking for is a way for the query to find "any text between two paragraph returns, no matter what tthe length", but I don't know how to do this.All the Wildcard options seem to find just one exampler (one digit, one character etc)

And you came so far
The operators for repeat are ? (zero or once), * (zero or more) and + (once or more). You can also specify exact numbers: {at least,up to}.
All of these operators are "greedy" by default -- they will match as much as possible. To match as least as possible (which I'm sure you'll come up against, sooner or later), add another ? after the repeat expression.
So this will find one digit, then optionally another (which will always be included):
\d\d?
and this one digit, then zero or as much as ten million million zillion:
\d\d*
which is functionally the same as
\d+
And this will find between 3 and 8 digits but will forced to use the shortest possible match:
\d{3,8}?
That said: A quick & dirty solution for your actual problem is to find any amount of digits, spaces, and comma's:
~b[\d, ]+~b
(we need the plus here because otherwise it would also match an empty line). The [..] brackets an Inclusive list --- it will match any of the single codes inside.
A more complicated but 'neater' way is to search very specifically only for number, comma, space, number sequences -- it's neater because that way malformed lines (comma without a space) will be skipped!
(It also introduces another code -- the parentheses operators. Look them up in a good GREP reference --lost of people are enthousiastic about Peter Kahrel's O'Reilly title, because it's about using GREP in InDesign.)
~b\d+(, \d+)*~b

Use REGEXP_INSTR to find a text string with space(s) in it

I am trying to use REGEXP_INSTR to find a text string with space(s) in it.
(This is in a Function.)
Let's say ParmIn_Look_For has a value of 'black dog'. I want to see if
ParmIn_Search_This_String has 'black dog' anywhere in it. But it gives an error
Syntax error on command line.
If ParmIn_Look_For is just 'black' or 'dog' it works fine.
Is there some way to put single quotes/double quotes around ParmIn_Look_For so this will
look for 'black dog' ??
Also: If I want to use the option of ignoring white space, is the last parm
'ix' 'i,x' or what ?
SELECT
REGEXP_INSTR(ParmIn_Search_This_String,
'('||ParmIn_Look_For||')+', 1, 1, 0, 'i')
INTO Position_Found_In_String
FROM DUAL;
Thanks, Wayne

Maybe something like this ?
test@ORA10G>
test@ORA10G> with t as (
2    select 1 as num, 'this sentence has a black dog in it' as str from dual union all
3    select 2, 'this sentence does not' from dual union all
4    select 3, 'yet another dog that is black' from dual union all
5    select 4, 'yet another black dog' from dual union all
6    select 5, 'black dogs everywhere...' from dual union all
7    select 6, 'black dog running after me...' from dual union all
8    select 7, 'i saw a black dog' from dual)
9 --
10 select num, str
11 from t
12 where regexp_like(str,'black dog');
       NUM STR
         1 this sentence has a black dog in it
         4 yet another black dog
         5 black dogs everywhere...
         6 black dog running after me...
         7 i saw a black dog
5 rows selected.
test@ORA10G>
test@ORA10G>pratz
Also, 'x' ignores whitespace characters. Link to doc:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/conditions007.htm#i1048942
Message was edited by:
pratz

Apple Finder webdav client launch many GET requests when I explore a folder

Hi,
I write a WebDAV server in Python.
I found one issue with Apple Finder WebDAV client and I've noticed same
issue with apache mod_dav server.
Issue : when Finder explore a folder, Finder download the totaly of all files !
I don't know who do all this GET requests ? Spotlight ?
This is very boring because if I've some big file in a folder, all this data
are transfered on my bandwidth.
Have you see the same issue ? Who does this request ? How can I disable this
transfert ?
Thanks for your help,
Stephane

Same issue explained here :
http://code.google.com/p/sabredav/wiki/Finder

How to find my my iphone 4S and iphone 4 using the Iphone Finder Apps?

How can we use the Iphone Finder to find multiple units of Iphone 4s?

Apple - iPhone 4S - Locate your missing iPhone with Find My iPhone - http://www.apple.com/iphone/built-in-apps/find-my-iphone.html But I think that only does one phone at a time because it isn't designed as a general person tracking feature.
Or are you just trying keep track of a group of phones in a general sense? I believe there is a Friends app (can't remember the name) which lets "friends" permit other friends to send a request to a phone to let the phone show where it is located.
Sometimes it helps to put this kind of question in more context because rather than getting just an answer to your question you may get a solution to the issue.

Server error:Could not find a client that is able to launch the selection.

server error
Hi all,
When i try to run jsp file on server, RAD prompt me this error: Could not find a client that is able to launch the selection.
Please help,
thanks

Hi
A question. The deploy is right?
thank you

Using WCS to find WPA1 clients

Similar Messages

Maybe you are looking for