Using Windows 7 Backup (with 3.0 TB drive) the backup fails with an error code of (0x8078002A)

I have tried for over a month to back up my laptop to a new external 3TB drive (DWC130). I have reformatted it, changed my windows backup settings, and read as much as I could about this issue and still have had no success. I have reformatted the drive; I have allowed Windows 7 (64-bit) to back up with its own settings; I have read forums all over and there has been no answer provided that solved this issue. I am hoping someone from Toshiba or this form can provide some direction.

Error code 0x8100002F and or error code 0x80070002 when you back up files in Windows 7
-Jerry

Similar Messages

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This doe not accure usingg IE 8.0 with the same printer.

Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This problem also occurs with the web page on which this question is submitted. This doe not occur using IE 8.0 with the same printer.

These have nothing to do with Firefox.
C:\ProgramData\FLEXnet\Connect
\11\ISUSPM.exe
and
C:\Users\Vinegarhill-User Acc\Desktop\Malware Removal Programs\eXplorer.exe
This one - C:\Users\Vinegarhill-User Acc\AppData\Roaming\Mozilla\Firefox\Profiles\ak4dv58c.default\extensions\ \components\afom.exe - is probably the '''AFOM - Memory Recovery & Retention For Firefox Only''' extension.
https://addons.mozilla.org/en-US/firefox/addon/11922/
My advice is to uninstall that extension. IMO, you have too many extensions installed, and are asking for problems with Firefox. I am not against using a lot of extensions in Firefox ''(I typically have 45 to 50 extensions installed, but the mix of extensions you have scares me as potentially problematic.)''

I get the following error when formatting a external hard drive. Partition failed with the error: POSIX reports: The operation couldn't be completed. Cannot allocate memory

I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Problems connecting to SSRS using IReportServerCredentials, the request failed with http status 401: unauthorized

We have a hosted SSRS server and we access it's reports using the reportviewer in an ASP.net application.
We are getting the error: The request failed with HTTP status 401: Unauthorized. When trying to run one of the reports. I have confirmed that the login details work when logging into the report manager page directly.
I have implemented an instance of IReportServerCredentials in a separate class (below) and I call it from the page before it tries to access the report. I'm not sure if this is all I need but can't seem to find any other info.
I have managed to gain access connecting to the external server from my PC and accessed the report, but when I promote the code to production and run it from there on my local PC I get the unauthorized message again: the request failed with http status
401: unauthorized
The class:
[Serializable]
public sealed class MyReportServerCredentials :
IReportServerCredentials
public WindowsIdentity ImpersonationUser
get
// Use the default Windows user. Credentials will be
// provided by the NetworkCredentials property.
return null;
public ICredentials NetworkCredentials
get
// Read the user information from the Web.config file.
// By reading the information on demand instead of
// storing it, the credentials will not be stored in
// session, reducing the vulnerable surface area to the
// Web.config file, which can be secured with an ACL.
// User name
string userName =
ConfigurationManager.AppSettings
["MyReportViewerUser"];
if (string.IsNullOrEmpty(userName))
throw new Exception(
"Missing user name from web.config file");
// Password
string password =
ConfigurationManager.AppSettings
["MyReportViewerPassword"];
if (string.IsNullOrEmpty(password))
throw new Exception(
"Missing password from web.config file");
// Domain
string domain =
ConfigurationManager.AppSettings
["MyReportViewerDomain"];
return new NetworkCredential(userName, password);
public bool GetFormsCredentials(out Cookie authCookie,
out string userName, out string password,
out string authority)
authCookie = null;
userName = null;
password = null;
authority = null;
// Not using form credentials
return false;
The call to the class, just before the report is run:
if (GetConnection.GetConnectionString().ToString().Contains("IP of external server removed"))
invoiceviewer.ServerReport.ReportServerCredentials = new MyReportServerCredentials();
We have tried so many things here, we don't even care whether the server authenticates or not but it appears to be as standard. Our hosting company has also drawn a blank and changed so many settings to no ava

Hi Nasa1999,
According to your description, you are getting the error: The request failed with HTTP status 401: Unauthorized when you access the report using the ReportViewer in an ASP.net application.
Regarding the 401 error, it could cause by the Service Principal Name(SPN) for the account the Reporting Services is running under hasn’t been registered when the Reporting Services is configured to use Kerberos authentication. So in your scenario,
please check if you are using Kerberos authentication. If that is a case, please make sure SPN is configured correctly. For more information, please refer to the similar thread:
The request failed with HTTP status 401: Unauthorized. in SSRS.
If issue persists, please check the Reporting Service error log (default location: %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles) around the time that the error message thrown out.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Please help: Utility used to install the update failed with exit code {0}.

Hi,
I admit to being a relative newbie at Solaris 10 administration, so please exercise forbearance on my behalf.
I have just installed Solaris 10 11/06 on my laptop x86. Everything went fairly smoothly. I used the Installation Check Tool 1.2 to decide if my machine was adequate to run the OS and with the exception of a NIC driver, it was. I downloaded the sfe driver and configured networking and it seems to work exceptionally well. However, when I run Update Manager in JDS (the only way I know how to run it), it fails to update some of the packages. Sometimes, if I retry the same packages, sometimes it will eventually work. But it keeps failing with the following error on a consistent basis over the last several days:
Utility used to install the update failed with exit code {0}.
I hunted around on the web and the results were not promising. Is there a log somewhere that will give me the actual error or do y'all know of a quick fix.
Thanks,
Will

That is strange indeed, could you try downloading and
applying the unsigned zip to see if that works?The problem persits:
# patchadd -M /root/119116/
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119116-22
Preparing checklist for non-global zone check...
Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting.

How do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

how do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

How have you managed to get apps on your phone that are tied to a different and unknown AppleID?
If these apps were not purchased by you, having them is effectively software piracy and you should purchase them using your own AppleID if you want to keep hem.

Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.

9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it.

I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Plus, EXACTLY what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either.

I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either. How can i locate it or toggle it to turn on again?

I'm not sure what artboard view is, sorting and naming artboards is not available in CS4 either, sorting however is possible via script workaround,
Introducing: re Arrange Artboards v2 Script

Utility used to install the update failed with exit code 1

Hello!
When I try to install an update on my system, the following happens:
# smpatch update -i 119116-22
Update 119116-22 will not be downloaded since it already exists in the download directory.
Installing patches from /var/sadm/spool...
Failed to install patch 119116-22.
Utility used to install the update failed with exit code 1.
Validating patches...
Loading patches installed on the system...Done!
Loading patches requested to install.Done!
Checking patches that you specified for installation.Done!
Approved patches will be installed in this order:119116-22
Preparing checklist for non-global zone check...Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting.
Failed to install patch 119116-22.
ALERT: Failed to install patch 119116-22.
Does anyone know how to fix this?
TIA
Stephan

That is strange indeed, could you try downloading and
applying the unsigned zip to see if that works?The problem persits:
# patchadd -M /root/119116/
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119116-22
Preparing checklist for non-global zone check...
Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting.

I have a imac g4 with a philips cdd5301 drive. the drive doesn't work what should i replace it with

i have a imac g4 with a philips cdd5301 drive. the drive doesn't work. what should i replace it with that is compatible. i've seen some bad reviews about the philips drive

Any good external optical drive should do, in this case, Google is your friend, just make sure it's Mac compatible.

HT201412 while using sometimes my iphone 5stops working and shows the apple logo with white background for 5 seconds and in short time it returns to home screen.please solve it

while using sometimes my iphone 5stops working and shows the apple logo with white background for 5 seconds and in short time it returns to home screen.please solve it

Hi there bencong111,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
-Griff W.

Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

EVENT 36888, Schannel A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252.

I keep losing my network connection for a few seconds at a time. Not a big deal unless I just spent time filling in a form and have to redo it.
Getting:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8. I just installed the new ARRIS
TG862 provided by Comcast.
Any Ideas?
Also get the following errors in my events:
The name "WORKGROUP :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
Realtek PCIe GBE Family Controller is disconnected from network.
Any help is appreciated

Hi,
Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
How to use Skydrive
http://www.wikihow.com/Use-SkyDrive
Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
check device status in device manager, please also keep the all latest driver update of your PC.
And for error 36888, I found a similar thread, please refer to this link
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
Regards
Yolanda
TechNet Community Support

Using Windows 7 Backup (with 3.0 TB drive) the backup fails with an error code of (0x8078002A)

Similar Messages

Maybe you are looking for