Using Windows NT 4.0 client program connecting to oracle 8i linux server

Dear sir/madam,
Recently, I have successfully installed Oracle 8i in my red hat linux database server. I am disappointed because I can find client side Oracle Enterprise Manager in my linux server even I have installed client program in my linux database server.
Next, I install Oracle 8i client side program (windows NT/2000 version) in my Windows NT 4.0 server. I am still disappointed because I find Oracle Enterprise Manager console cannot work.
For Windows NT 4.0 Enterprise Manager, I have key in default administrator sysman, password oem_temp, and connect to mamagement server hangng (my linux database server). An error message display 'VTK-1000 Unable to connect to the management server hangng. Please verify that you have entered the correct host name and the status of the Oracle Management Server.'.
What's wrong with both Oracle 8i Management Server in linux database server and windows nt 4.0 server. Is there any problem for Oracle Management server console to connect to red hat linux database server?

[email protected] wrote:
I need to confirm that I will be able to connect an Oracle 11g R2 client (administrator install) to an Oracle 8i DB before i bother trying to setup such a scenario?Don't waste your time. It won't work. It simply results in an error.
I saw another thread that mentioned a patch level required for 8i to let the 10g client connect. Is there such a patch level needed for 11g clients as well?There is no such patch for 8i which allows 11g client to connect.

Similar Messages

Can't connect to Easy VPN Server using Windows 7 inbuilt VPN client

Hi Everyone,
I would like your help to resolve a vpn issue I am having with my Windows 7 inbuilt vpn client. I am trying to connect to an Easy vpn server on a Cisco 2951 ISR G2. Well, I can connect using Cisco vpn client v5.07 but I can't connect using Windows 7 inbuilt vpn client. Is there any configuration that I am missing so that I can connect using Windows 7 inbuilt vpn client to connect to the vpn server?
Thank you.

Hi MindaugasKa,
Base on your description, your case must is the NPS client can’t pass the NPS policy.
The NPS client can’t connect the network may have many reason, such as the Network Access Protection Agent service not started successful, the certificate not issued properly,
please offer us information when your Windows 7 client denied, such as event id, original error information, screenshot.
More information:
Extensible Authentication Protocol (EAP) Settings for Network Access
http://technet.microsoft.com/en-us/library/hh945104.aspx
Network Access Protection in NPS
http://msdn.microsoft.com/en-us/library/cc754378.aspx
Appendix A: NAP Requirements
http://technet.microsoft.com/en-us/library/dd125301(v=ws.10).aspx
802.1X Authenticated Wireless Access Overview
http://technet.microsoft.com/en-us/library/hh994700.aspx
Connecting to Wireless Networks with Windows 7
http://technet.microsoft.com/library/ff802404.aspx
The related thread:
NPS 2012 rejects windows 7 clients after upgrade from 2008 R2. Requested EAP methods not available
http://social.technet.microsoft.com/Forums/windowsserver/en-US/44af171f-6155-4f2e-b6c7-f89a2d755908/nps-2012-rejects-windows-7-clients-after-upgrade-from-2008-r2-requested-eap-methods-not-available?forum=winserverNAP
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT4972 I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS.

I AM USING WINDOWS XP. WHEN I AM CONNECTING MY IPOD TOUCH MODEL NO. MC 008LL TO MY PC ,CHARGING INDICATION IS COMING BUT NEITHER THE WINDOWS NOR THE LATEST VERSION I TUNE 10.6.3 DETECTING MY IPOD. IT IS ALSO NOT SHOWING IN I TUNE WINDOWS."DEVICE LIST" IS NOT DISPLAYING IN LEFT HAND SIDE WINDOW OF I TUNE. BEFORE IT WAS WORKING IN ITUNES 9 AND I WAS USING IT. BUT NOW IT IS NOT DETECTIN AT ALL. SO PLEASE HELP ME WHAT TO DO?

Have you tried here:
iOS: Device not recognized in iTunes for Windows

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Connecting from Oracle to SQL Server

Hi
I am now tring to connect from oracle to sql server using database link.
Created database link
but when connecting to remote db getting the floowing error
select * from region@mysqlserverdsn
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLSERVERDSN
Can anyone help
My Listener File
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc1)
(SID_DESC =
(GLOBAL_DBNAME = ORCL.DOMAIN.COM)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = orcl)
(SID_DESC =
(GLOBAL_DBNAME = NORTHWIND.DOMAIN.COM)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = MYSQLSERVERDSN)
(PROGRAM=hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = SALIHKM.DOMAIN.COM)(PORT = 1522))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
My Tnsnames Entry
MYSQLSERVERDSN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=1522))
(CONNECT_DATA=(SID=MYSQLSERVERDSN))
(HS=OK)
Lsnrctl is working fine.
c:\>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2006 18:53
:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 18-MAY-2006 18:53:16
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
Services Summary...
Service "NORTHWIND.DOMAIN.COM" has 1 instance(s).
Instance "MYSQLSERVERDSN", status UNKNOWN, has 1 handler(s) for this service..
Service "ORCL.DOMAIN.COM" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
But Tnsping show no listener
C:\>tnsping MYSQLSERVERDSN
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2
006 18:56:27
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(P
ORT=1522)) (CONNECT_DATA=(SID=MYSQLSERVERDSN)) (HS=OK))
TNS-12541: TNS:no listener
Services
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2006 19:00
:04
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
Services Summary...
Service "NORTHWIND.DOMAIN.COM" has 1 instance(s).
Instance "MYSQLSERVERDSN", status UNKNOWN, has 1 handler(s) for this service..
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "ORCL.DOMAIN.COM" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: SALIHKM, pid: 2080>
(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(PORT=1070))
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I am very much confused with this situation.
Thanks & Regards
Salih Km

Hi ,
Thanks for your reply.
Contents of my initMYSQLSERVERDSN.ora file is
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLSERVERDSN
HS_FDS_TRACE_LEVEL = 0
HS_FDS_TRACE_FILE_NAME = hsmsql.trc
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
set ODBCINI=c:\WINDOWS\ODBC.INI
SALIHKM.DOMAIN.COM is my system in which Oracle Test DB is Installed.
SQL Server is in another location.
In Tnsnames i specified ip address.
One more doubt.
I am using 10g Release 2 demo version.
whether it will support Hetrogeneous Services?
How to know whether a database supports HS or not?
Thanks & Regards
Salih Km

Hetrogeneoues connection between Oracle and SQL server

Hi ,
I am having Issues in Making Heterogeneous DB link between Oracle Xe and sql server .
Here is the scenario-
My Oracle and ms SQL 2003 are running on same machine(windows 2003) ,
I have followed this link and reached till 5 but I am not able to tnsping the SQLSERVER DNS entry .
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
Below are my lintener and tnsfiles
LISTENER.ORA
===========================================================================================================================================================
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
       (ENVS = "EXTPROC_DLLS=ONLY:C:\oraclexe\app\oracle\product\11.2.0\server\bin\OraClr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
LISTENERSQL =
(ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
      (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
SID_LIST_LISTENERSQL=
(SID_LIST=
      (SID_DESC =
       (SID_NAME = SQLSRVRDBLNK)
       (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
       (PROGRAM = hsodbc)
===========================================================================================================================================================
TNSNAMES.ORA
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = testenviroment)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
SQLSRVRDBLNK =
(DESCRIPTION=
(ADDRESS= (PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
(CONNECT_DATA=(SID=SQLSRVRDBLNK)
(HS=OK)
========================================================================================================================================================
Listner Status
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN>lsnrctl status LISTENERSQL
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 19-JUL-2013 13:15:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
STATUS of the LISTENER
Alias                     LISTENERSQL
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date                19-JUL-2013 12:17:39
Uptime                    0 days 0 hr. 58 min. 24 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listenersql\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "SQLSRVRDBLNK" has 1 instance(s).
Instance "SQLSRVRDBLNK", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
=========================================================================================================================================================
Now If I try to Tnsping SQL heterogeneous connection , i get
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN>tnsping SQLSRVRDBLNK
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 19-JUL-2013 13:17:47
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=
TNS-12533: TNS:illegal ADDRESS parameters
Need Help , please suggest
Thanks,
Manish

Hi ,
Thanks for the update I have changed the Listener as suggested , now my Listener File is
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
       (SID_NAME = SQLSRVRDBLNK)
       (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
       (PROGRAM = hsodbc)
       (ENVS = "EXTPROC_DLLS=ONLY:C:\oraclexe\app\oracle\product\11.2.0\server\bin\OraClr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST=
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.60.146)(PORT = 1521))
      (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
      (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
========================================================================================================================
and tns entry
SQLSRVRDBLNK =
(DESCRIPTION=
(ADDRESS= (PROTOCOL= TCP)(HOST=192.168.60.146)(PORT=1522))
(CONNECT_DATA=(SID=SQLSRVRDBLNK)
(HS=OK)
========================================================================================================================
Restarted the listener
C:\Documents and Settings\Administrator>lsnrctl start LISTENER
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 20-JUL-2013 12:27:38
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
System parameter file is C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.60.146)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date                20-JUL-2013 12:27:44
Uptime                    0 days 0 hr. 0 min. 5 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.60.146)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SQLSRVRDBLNK" has 1 instance(s).
Instance "SQLSRVRDBLNK", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
========================================================================================================================
Still Getting the same Error
C:\Documents and Settings\Administrator>tnsping SQLSRVRDBLNK
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 20-JUL-2013 12:27:52
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=
TNS-12533: TNS:illegal ADDRESS parameters
C:\Documents and Settings\Administrator>
========================================================================================================================
Do we need to change any thing in sqlnet.ora file for heterogeneous connection?
Thanks ,
Manish

Problem while connecting to oracle in linux

i connected to oracle in linux as
"sqlplus ,#sysdba,"
after that it asked me for password
and i typed as "oracle"
after tat message displayed that "connected to IDEAL instance"
SQL>select * from tab;
i got an error message staying tat "ORACLE not connected"
can anyone help me out where the poblem is getting

hi,
after tat message displayed that "connected to IDEAL instance"
i got an error message staying tat "ORACLE not connected"you are connected to an ideal instance.
you should mount and then open the database
if you are using spfile
then issue
SQL>startup
database mounted.
database opened.
or
SQL> startup nomount pfile='location'
database will be in nomount stage
SQL>alter database mount;
database mounted.
SQL>alter database open;
then you can issue your command..
regards,
Deepak

Unable to connect to Oracle Weblogic Administration Server

Hi Folks,
As part of installation steps, I am facing error with " Unable to connect to Oracle Weblogic Administration Server"
Below is AdminServer Log, So please guide me reolving this impending issue.
####<12 Jun, 2014 2:46:01 PM IST> <Info> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564561284> <BEA-149059> <Module adminservicesmbeans of application biadminservices [Version=11.1.1] is transitioning from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
####<12 Jun, 2014 2:46:05 PM IST> <Info> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564565300> <BEA-149061> <Module adminservicesmbeans of application biadminservices [Version=11.1.1] failed to transition from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
####<12 Jun, 2014 2:46:11 PM IST> <Error> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564571861> <BEA-149231> <Unable to set the activation state to true for the application 'biadminservices [Version=11.1.1]'.
weblogic.management.DeploymentException: Unexpected error encountered
at weblogic.deploy.internal.targetserver.AppContainerInvoker.getOrCreateDeploymentException(AppContainerInvoker.java:299)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:84)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.OutOfMemoryError: PermGen space
at weblogic.j2ee.J2EELogger.logIgnoringUndeploymentError(J2EELogger.java:2902)
at weblogic.application.internal.BaseDeployment$2.logRollbackError(BaseDeployment.java:682)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:65)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Thanks,
Wj

Did you manage to solve this issue?
I'm running into the exact same error, but installing 11.1.1.7.0 on Windows 2003
Haven't found anything on MOS yet :(
Kind regards,
Rob
Edited by: rgouw on 10-apr-2013 1:10

Tnsping doesnt work. cant connect to oracle on linux from windows client

Installed Oracle 11g on Linux VM. Tried connecting from Tora/SqlDeveloper from Windows machine, but fails. TNSPING fails. PING works fine. Any idea how to resolve below issue?
Below is the info and checks made :
[oracle@oraclelinux6 admin]$ more *.ora
listener.ora
# listener.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = orcl)
      (ORACLE_HOME = /apps/app/oracle/product/11.2.0/dbhome_1)
      (SID_NAME = orcl)
LISTENERLX =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = /apps/app/oracle
sqlnet.ora
# sqlnet.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = /apps/app/oracle
SQLNET.EXPIRE_TIME=10
SQLNET.INBOUND_CONNECT_TIMEOUT=240
tnsnames.ora
# tnsnames.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = orcl)
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ ifconfig
eth1      Link encap:Ethernet HWaddr 08:00:27:CA:B7:5D
          inet addr:192.168.1.121 Bcast:192.168.1.255 Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:feca:b75d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:243465 errors:0 dropped:0 overruns:0 frame:0
          TX packets:143708 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:347575845 (331.4 MiB) TX bytes:9778008 (9.3 MiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:36859 errors:0 dropped:0 overruns:0 frame:0
          TX packets:36859 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2400424 (2.2 MiB) TX bytes:2400424 (2.2 MiB)
virbr0    Link encap:Ethernet HWaddr 52:54:00:8D:63:05
          inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
          UP BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[oracle@oraclelinux6 admin]$ hostname
oraclelinux6.localdomain
[oracle@oraclelinux6 admin]$ more /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
10.0.2.15       oraclelinux6.localdomain
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ sqlplus system@orcl
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 2 08:19:59 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name: system
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> set head off
SQL> select * from v$instance;
              1 orcl
oraclelinux6.localdomain
11.2.0.1.0        01-DEC-13 OPEN         NO           1 STOPPED
ALLOWED    NO ACTIVE            PRIMARY_INSTANCE   NORMAL    NO
SQL> select * from v$database;
1360274593 ORCL      26-NOV-13            945184 26-NOV-13
                      1 15-AUG-09 NOARCHIVELOG            1071075
        1033565 CURRENT 26-NOV-13                  1283             1094699
02-DEC-13 NOT ALLOWED 26-NOV-13 READ WRITE           MAXIMUM PERFORMANCE
UNPROTECTED          ENABLED   1360252065 1360252065 PRIMARY
            945184 DISABLED NOT ALLOWED          DISABLED NONE    NO       NO
NO NO           13
Linux x86 64-bit
                           2                      2     1094771
NO                 NO NO orcl
                         0 DISABLED
                    0
NO                                 NO
LSNRCTL> show inbound_connect_timeout
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
LSNRCTL>
[oracle@oraclelinux6 admin]$ tnsping orcl
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:11:34
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/apps/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl)))
OK (0 msec)
<msg time='2013-12-02T08:11:55.728-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
<msg time='2013-12-02T08:13:23.444-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:13:23 * (CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=sqlplus)(HOST=oraclelinux6.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=60806)) * establish * orcl * 12514
</txt>
</msg>
<msg time='2013-12-02T08:13:23.444-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
<msg time='2013-12-02T08:19:54.141-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:19:54 * service_update * orcl * 0
</txt>
</msg>
<msg time='2013-12-02T08:20:00.146-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:20:00 * service_update * orcl * 0
</txt>
</msg>
<msg time='2013-12-02T08:20:03.639-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:20:03 * (CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=sqlplus)(HOST=oraclelinux6.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=60970)) * establish * orcl * 12514
</txt>
</msg>
<msg time='2013-12-02T08:20:03.639-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
[oracle@oraclelinux6 admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:25:38
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ lsnrctl status LISTENERLX
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:29:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENERLX
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                02-DEC-2013 07:55:29
Uptime                    0 days 0 hr. 33 min. 54 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File         /apps/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/oraclelinux6/listenerlx/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "orcl.localdomain" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.localdomain" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@oraclelinux6 admin]$
CLIENT SIDE :
C:\Windows\system32>ping 192.168.1.121
Pinging 192.168.1.121 with 32 bytes of data:
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.121:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>tnsping ORACLELINUX6
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 03-DEC-2013 01:30:13
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\app\Laasya\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.121)(PORT = 1521)) (C
ONNECT_DATA = (SERVICE_NAME = orcl)))
TNS-12535: TNS:operation timed out
# tnsnames.ora Network Configuration File: D:\app\Laasya\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = Laasya-PC)(PORT = 1522))
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = Laasya-PC)(PORT = 1522))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
ORACLELINUX6 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.121)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = orcl)

f0c7e0f7-dab5-4b63-a36c-04b7e8eb552d wrote:
Installed Oracle 11g on Linux VM. Tried connecting from Tora/SqlDeveloper from Windows machine, but fails. TNSPING fails. PING works fine. Any idea how to resolve below issue?
Below is the info and checks made :
[oracle@oraclelinux6 admin]$ more *.ora
listener.ora
# listener.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = orcl)
      (ORACLE_HOME = /apps/app/oracle/product/11.2.0/dbhome_1)
      (SID_NAME = orcl)
LISTENERLX =
It is pointless, and just adds to the confusion, to name your listener anything other than the default name of LISTENER
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Client requests to 'localhost' (or its ip address of 127.0.0.1) never leave the client machine. Hence, any listener configured for that address will never receive a request from any other machine.
ADR_BASE_LISTENER = /apps/app/oracle
sqlnet.ora
# sqlnet.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = /apps/app/oracle
SQLNET.EXPIRE_TIME=10
SQLNET.INBOUND_CONNECT_TIMEOUT=240
tnsnames.ora
# tnsnames.ora Network Configuration File: /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
See comment above regarding 'localhost'.
    (CONNECT_DATA =
      (SERVICE_NAME = orcl)
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ ifconfig
eth1      Link encap:Ethernet HWaddr 08:00:27:CA:B7:5D
          inet addr:192.168.1.121 Bcast:192.168.1.255 Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:feca:b75d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:243465 errors:0 dropped:0 overruns:0 frame:0
          TX packets:143708 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:347575845 (331.4 MiB) TX bytes:9778008 (9.3 MiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:36859 errors:0 dropped:0 overruns:0 frame:0
          TX packets:36859 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2400424 (2.2 MiB) TX bytes:2400424 (2.2 MiB)
virbr0    Link encap:Ethernet HWaddr 52:54:00:8D:63:05
          inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
          UP BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[oracle@oraclelinux6 admin]$ hostname
oraclelinux6.localdomain
[oracle@oraclelinux6 admin]$ more /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
10.0.2.15       oraclelinux6.localdomain
where did that 10.0.2.15 address come from? You don't have any network adapters configured for that address
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ sqlplus system@orcl
SQL*Plus: Release 11.2.0.1.0 Production on Mon Dec 2 08:19:59 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
A well-documented error.
see: http://edstevensdba.wordpress.com/2011/03/19/ora-12514/ (ora-12514 Listener does not know of requested service )
Enter user-name: system
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Since you did not use a tns service name ('@orcl') this was a bequeth connection to a local database.
SQL> set head off
SQL> select * from v$instance;
              1 orcl
oraclelinux6.localdomain
11.2.0.1.0        01-DEC-13 OPEN         NO           1 STOPPED
ALLOWED    NO ACTIVE            PRIMARY_INSTANCE   NORMAL    NO
SQL> select * from v$database;
1360274593 ORCL      26-NOV-13            945184 26-NOV-13
                      1 15-AUG-09 NOARCHIVELOG            1071075
        1033565 CURRENT 26-NOV-13                  1283             1094699
02-DEC-13 NOT ALLOWED 26-NOV-13 READ WRITE           MAXIMUM PERFORMANCE
UNPROTECTED          ENABLED   1360252065 1360252065 PRIMARY
            945184 DISABLED NOT ALLOWED          DISABLED NONE    NO       NO
NO NO           13
Linux x86 64-bit
                           2                      2     1094771
NO                 NO NO orcl
                         0 DISABLED
                    0
NO                                 NO
LSNRCTL> show inbound_connect_timeout
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
LSNRCTL>
[oracle@oraclelinux6 admin]$ tnsping orcl
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:11:34
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/apps/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl)))
OK (0 msec)
<msg time='2013-12-02T08:11:55.728-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
<msg time='2013-12-02T08:13:23.444-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:13:23 * (CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=sqlplus)(HOST=oraclelinux6.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=60806)) * establish * orcl * 12514
</txt>
</msg>
<msg time='2013-12-02T08:13:23.444-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
<msg time='2013-12-02T08:19:54.141-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:19:54 * service_update * orcl * 0
</txt>
</msg>
<msg time='2013-12-02T08:20:00.146-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:20:00 * service_update * orcl * 0
</txt>
</msg>
<msg time='2013-12-02T08:20:03.639-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>02-DEC-2013 08:20:03 * (CONNECT_DATA=(SERVICE_NAME=orcl)(CID=(PROGRAM=sqlplus)(HOST=oraclelinux6.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=60970)) * establish * orcl * 12514
</txt>
</msg>
<msg time='2013-12-02T08:20:03.639-08:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='oraclelinux6.localdomain'
host_addr='10.0.2.15'>
<txt>TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
</txt>
</msg>
[oracle@oraclelinux6 admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:25:38
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
[oracle@oraclelinux6 admin]$
[oracle@oraclelinux6 admin]$ lsnrctl status LISTENERLX
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 02-DEC-2013 08:29:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENERLX
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                02-DEC-2013 07:55:29
Uptime                    0 days 0 hr. 33 min. 54 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /apps/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File         /apps/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/oraclelinux6/listenerlx/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
See previous comments regarding localhost and 127.0.0.1
Services Summary...
Service "orcl.localdomain" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.localdomain" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@oraclelinux6 admin]$
CLIENT SIDE :
C:\Windows\system32>ping 192.168.1.121
Pinging 192.168.1.121 with 32 bytes of data:
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Reply from 192.168.1.121: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.121:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>tnsping ORACLELINUX6
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 03-DEC-2013 01:30:13
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\app\Laasya\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.121)(PORT = 1521)) (C
ONNECT_DATA = (SERVICE_NAME = orcl)))
TNS-12535: TNS:operation timed out
# tnsnames.ora Network Configuration File: D:\app\Laasya\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = Laasya-PC)(PORT = 1522))
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = Laasya-PC)(PORT = 1522))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
ORACLELINUX6 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.121)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = orcl)
You've thrown out a huge amount of detailed data, but showing a variety of errors, and combinations. Overall, I get the impression you are confusing remote vs. local connections. Please read the following, then come back and let's focus on one error at a time.
see: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
see: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ ( Help! I can’t connect to my database (part duex) )

Windows 7 Pro Client loses connectivity to internal Win2k8 web server

1. affected workstation are Optiplex 380 running Win 7 pro sp1 with broadcom NICs.
2. Internal users use a internal webserver for customer invoicing application. Users lose connectivity to this internal web server, all other networking works, network shares, internet, etc. If I try to ping the webserver IP I get no reply. XP
machines are not affected. Not a DHCP issue as there are plenty of IPs.
3. I have tried different internal NICs (3com) but still had issue. I have upgraded BIOS, nic drivers. etc.
4. I rebuilt one of the machines using Windows XP pro sp3 and have had no issue with that workstation.
the problem started a few months or so ago. I have not been able to determine the source. I tried running wireshark but nothing stuck out. I have changed the session settings on the IIS server from 15 minutes to 6 hours but did not make a difference.
5. Today when client lost connectivity to the server I tried pinging from the server back to the client and the connection was restored. This issue really has me confused as I cannot find anything in the logs that sticks out.

Hello,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.

Using Windows 7, i-tunes will not connect to i-tunes store. How do I fix this?

Using my desktop with Windows 7, my iTunes will not connect to the iTuens store. All other functions of iTunes works great. I have all other programs that require internet working just fine..ie browsers (IE, FireFox or Chrome, and all email services) and all work normal.
I updated iTunes to current version as of today April 6, 2012 and now it does not work going to the iTunes Store.
I have about 6-8 different Apple devices that use this iTunes, but right now, none of these are connected with my iTunes, as I was just going in to do some music shopping first before connecting any of them to my PC.
How do I fix this?
Thanks in advance for any and all helpful information!
Angie

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Using Windows System Tools 'Back Up' Program????

If you enable the iPod as a disc and it shows up in Windows Explorer as just another drive, why can't I simply use the Windows System Tools 'back up' program to simply back up the iPod drive to my PC? Then when I want, I can reverse the process if needed.

I don't know if you know but Windows server 2003 supports shadow copies:
http://www.microsoft.com/windowsserver2003/technologies/storage/vds/default.mspx
You could use some backup sw on the Windows server to backup to a OS X server volume but that wont give you the TimeMachine functionality.
I can't tell you how the shadow copy files can be backed up.

Oracle Client to connect to oracle database 7.x

Hi,
I want to connect to oracle database 7.x from a win2K using ODBC.
I know I need sql*net to make a connection .
Can you tell me where can I find it on the site to download/purchase?
If it is not available,can you suggest me the other options available for my situation.
Thanks
Sushma.

Thank You Justin.
Can you provide me the link to the download/purchasing the oracle client.
Because when I searched on OTN ,I get only documentation,nothing to software downloads.
I really need some help.
Is oracle client called as oracle tools etc.????????
Thanks in advance
Sushma.

Using once created prepared statement with different connections in Oracle

Can I use same statement cash using different connections in Oracle
For example I have a prepared statement p1. After its using i close connection (return it to the pool)
Next time I want use p1 statement using another connection.
Question : When I creat p1 in second time ,is it returned from cash or created as a new statement. And what I should do to use once prepared statement using differend connections.
Thaks.

As far as I know a PreparedStatement lives and dies with the Connection that created it. So, you cannot use a PreparedStatement with other Connection instances than the one that created it.
You will have to recreate the PreparedStatement for each time you open a connection, or use the same PreparedStatement and NOT close the Connection in between. The last suggestion can be risky though, if you never close the connection...
Jakob Jenkov
www.jenkov.com

Error while connecting to Oracle in Linux

I wrote a JAVA program to test the connection with Oracle. It worked in NT environment, but it did not in Linux Environment. I got the error message: "IO exception: The Network Adapter could not establish the connection."
Here is JAVA code:
import java.sql.*;
class Employee1
public static void main (String args [])
throws SQLException
try{
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conn =
DriverManager.getConnection ("jdbc:oracle:thin:@203.149.143.1:1521:ora1",
"dxhub", "manager");
Statement stmt = conn.createStatement ();
ResultSet rset = stmt.executeQuery ("select user_id from user_info");
while (rset.next ())
System.out.println (rset.getString ("user_id"));
catch(Exception e)
System.out.println(e.getMessage());
I think there is nothing wrong with JAVA code. There must be something wrong in the Linux environment. I appreciate your help if someone can give me a little advice.
Tony
null

I wrote a JAVA program to test the connection with
Oracle. It worked in NT environment, but it did not
in Linux Environment. I got the error message: "IO
exception: The Network Adapter could not establish
the connection."
Here is JAVA code:
import java.sql.*;
class Employee1
public static void main (String args [])
throws SQLException
try{
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conn =
DriverManager.getConnection
n ("jdbc:oracle:thin:@203.149.143.1:1521:ora1",
"dxhub", "manager");
Statement stmt = conn.createStatement ();
ResultSet rset = stmt.executeQuery ("select user_id
d from user_info");
while (rset.next ())
System.out.println (rset.getString ("user_id"));
catch(Exception e)
System.out.println(e.getMessage());
I think there is nothing wrong with JAVA code. There
must be something wrong in the Linux environment. I
appreciate your help if someone can give me a little
advice.
Tony
nullDid you ever find an answer to this, I'm having the same problem. My application works under windows, but doesn't under linux.
Lonnie

Using Windows NT 4.0 client program connecting to oracle 8i linux server

Similar Messages

Maybe you are looking for