Using "x" to reject images when culling

I'm using the edit out system to cull my photos. After importing the pictures, I mark all of them using "P" for picks. Then, in library mode, I view them in lop mode, "L" or "F" for full screen and press “X” to mark an image as a “reject” when it's not worth keeping. It SHOULD disappear from view & go to the next image, but it is not. Help!
I'm doing everything this article says to do A Simple 3 Step Culling Workflow: The “Editing Out” Culling System - Digital Photography School

Use shift+X if you want it to advance automatically to the next image, in sequence. This is used where the images remain displayed in the Grid / the Filmstrip; you have just changed which one is enlarged as Loupe view.
The method in your link, had an extra step: setting up a view filter which continually monitors whether images are rejected or not.
Changing a particular image's status by pressing the X key, makes it ineligible to continue being displayed in such a filtered view. So it seems to disappear in that case.

Similar Messages

Widgets using ibook author - centering images when resizing

When I drag and drop png files into my ibook author widgets and attempt to zoom out to the maximum, the top portion of the image gets cut off. What am I doing wrong?

You need to click on the edit mask button until a little grab hand icon appears( may have to click a few times)
with this hand you can click on the image and drag it around with in the frame (croping it however you want)
ie drag it down so top of image shows
Images should be at the resoultion the are going to display at.
they should be scaled/croped in photoshop etc befor bringing into IBA.

Can I auto advance in LR mobile when I flag/reject images?

I've tried to find this but without luck..
Any help would be appreciated.
Will

Thanks for trying to assist Greule, but as John Beardsworth states I wasn't asking about auto tone.
I want to be able to cull my shoot images when travelling and the auto advance feature in the desktop would save me a lot of time. Also I've found that when I'm swiping sideways to go to the next image I'm inadvertently flagging or rejecting at the same time so it would prevent this happening.
Is it possible to enable this feature somewhere and I'm missing it, or have adobe neglected to include this?

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

1. You have allowed Apple to auto-upgrade your Mac
Turn off auto-update here:
Menu > Apple > System Preferences > App Store
2. The Icons on your dock are Aliases not real apps
They point to where the apps really are which is:
For Pages 5.2.2 in your Applications folder
For Pages '09 in your Applications/iWork folder
3. You are alternately opening documents randomly with either version of Pages
Both Pages have the same file extension .pages and there is no certainty as to which version opens them when you double click on a file.
right click on the file and choose which version you want to open it
4. Pages '09 can not open Pages 5 files
Pages 5 can not open Pages '08 files, and will convert and change Pages '09 and Word files.
It will also auto save opened files into its own format.
You can export these back to Pages '09 if you need to:
Menu > File > Export > Pages '09
5. Yes Pages 5.2.2 is a marked downgrade
Pages 5.2.2 has a few improvements but has had over 110 features removed and is buggy.
Sooner or later you will not be able to open a file or have it damaged in some way and it has a complex obscure file format largely incompatible with everything else, so you will not be able to rescue the contents of your file. If Pages or some third party server/eMail don't trash your file, eventually Apple will do it for you as it did when it released Pages 5 last September. I recommend using Pages '09 for the time being whilst you look for viable alternatives, some are here already and some are on the way.
For further information about what has happened:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=0882463378700 abf43a0f2433506bbbc&mforum=iworktipsntrick
Peter

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

NO IMAGE WHEN USING A PC PROJECTOR ?

I am running a new Pro L10 M360 laptop, using XP Pro.
However, when connecting to a PC Projector there is no signal/no image on the screen (either screen) the toggle fn buttons dont make dif either. its like there is no signal. can anyone help???
some suggested it was due to XP pro, but i cant see that myself!

Hi,
you can try to switch between the devices when you go to START - Control Panel - Display - Settings. There you see Screen 1 and 2 and you can switch between them! Also at Advanced at Dual display settings or Extended desktop are settings which should be checked!
Bye Bob

AI CS6 vectors turn into embedded image when using clipping mask

AI CS6 vectors turn into embedded image when using clipping mask, how to solve it?

With the Clipping Mask selected go here

No image when open using open image sequence

I cloned my macpro disk to a new, larger hdd using carbon copy. After doing when I open Quicktime 7 I'm unable to see an image when I..
file > open image sequence
All I see is the player, but no (first) jpg image in the sequence. I even tried paying for Q7 again and getting a new reg code See image below.

Hi,
you can try to switch between the devices when you go to START - Control Panel - Display - Settings. There you see Screen 1 and 2 and you can switch between them! Also at Advanced at Dual display settings or Extended desktop are settings which should be checked!
Bye Bob

By mistake i ereased my mackbook pro's disk. and when is restared it recovery page opened. and i did not purchase the osx mountain lion. do i have any other way to recory it without purchasing the copy of osx. can i do it using a usb having image file of

by mistake i ereased my mackbook pro's disk. and when is restared it recovery page opened. and i did not purchase the osx mountain lion. do i have any other way to recory it without purchasing the copy of osx. ?can i do it using a usb having image file of mountain lion?

Did you buy your machine second-hand? That's really the only way you would have to purchase OS X 10.8.x from the App Store... but, yes, if you have a USB thumb drive with a bootable installer (such as made with Lion DiskMaker) you can boot from that and reinstall OS X.
Clinton

I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the one PSD files by distorting the images and colour. Does anyone know how to recover the original images?

I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the open PSD files by distorting the images and colour. They are now completely unrecognisable and unusable. Does anyone know how to recover the original images as I was saving them as I went along but the files are now corrupt?

What version of Photoshop are you running?
I've seen a couple of instances over the last week or two where Photoshop has added masks, strange colours and also merged content from two separate PSD files that were open at the same time.
This has occurred on two different iMacs, (both 10.10.x) running Photoshop CC 2014.2.2 (20141204.r.310 x64).
see image below for example:

Using library images when making phone apps in AIR

Gidday guys
A lot of the tutorials I'm getting through practice embedding their images when making phone apps, and put these images in their assets folder.
I'm wondering - is it not OK to simply use images as symbols from your Flash Pro library?
I'm not refering to splashscreens or icons - rather images that make up the app's functionality.
I thought it may be something to do with supplying multiple images for different screen res', but I'm planning on designing at 640x960, and using...
stage.scaleMode = StageScaleMode.SHOW_ALL;
...to take care of different resolutions.
Thanks for your help.

Yes - I do this with my desktop AIR app.
What I'm wondering though is it OK to do this for phone apps, or is there some advantage to emedding the images and putting them in your project's assets folder? eg phones being able to cache images from assets, but not if the images are built into the swf.

Weird Scrambled images when using Intel HD Graphics

I recently bought a new 15" Macbook Pro and I have been seeing some really weird scrambled images when it is using the integrated graphics. I mostly notice it when switching to Top Sites in Safari or when using Spaces. Now, when I open a program to force the graphics to switch to the discrete 330M card (1Password triggers it, oddly enough), the images correct themselves within a second or two. I tried to take a screen grab using Grab, but that actually scrambles the image even more. Is anyone else seeing this, or is this a sign of a hardware failure?

I also have the same problem, only different circumstances. I've noticed there are several websites that I can go to that yield this issue, and for me the fix was to go into the Energy Saver system preferences and uncheck the Automatic Graphics Switching box. An example of an issue I'm currently experiencing is:
Visit http://www.macsimumnews.com/index.php/archive/applepatents_hint_at_final_pro_changes_and_or_new_media_presentationsoftw/
then click on the Reader button and the Safari window background gets all mangled. Click on the reader button again and it all goes away. Now repeat with that system preference turned off and it won't do it anymore.
Please advise if you can reproduce this. (Oh, this obviously is only for 2010 MacBook Pros that have that system preference option in the first place).

I am using the pattern stamp tool. when i select my pattern it adds a hatching to teh source pattern and copies that hatching to the destination image

I am using the pattern stamp tool. when i select my pattern it adds a hatching to the source pattern and copies that hatching to the destination image

Please post screenshots to illustrate what you are talking about.

How to sort and filter all images when using stacks?

I have a project where all images are arranged in stacks. I have also gone through and given each image a rating or rejected it. Now I want to sort out and display only a certain selection of images, i.e. rejected images for deletion or four star images etc. But the selection filter only seems to work on the stack pick. Can I change this so that the filter works on all images, even if they are part of an open stack? If not, how could I else single out all the rejected ones and delete them? I don't want to break the stacks.

The only current way to do this is via Smart Albums, as there is a checkbox at the bottom of the settings HUD: 'Ignore Stack Groupings'.
Ian
P.S. If you'd like to see this added to the regular search HUD (I know I would), please leave feedback at http://www.apple.com/feedback/aperture.html

Line along "bottom" of image when using camera on iPhone 4

Hi all
So I have a brand new iPhone 4 and everything seems fine, except for an issue when taking pictures with the camera, which I have a sneaking suspicion is a hardware fault. I'm hoping not, but I don't hold out much hope...
So when I take pictures, I have a line parallel with the bottom (side with the home button) of the iPhone. This appears both in the preview image when taking a shot, and on the saved image. It does not show when shooting video, but I have noticed the image is zoomed in slightly when shooting video, and the line is not in this.
The line is approximately 1cm away from the edge of the screen. This is not a discoloration, like with the bonding agent, it looks like a line of pixels.
I have taken a picture, but can't see how to upload it on this forum. If it'll help, I'll upload elsewhere and link it.
Thanks in advance for any suggestions.

And also when I completely turn my iphone off it doesn't reboot when I hold the power button in and I had to do a soft reset to make it restart but even when I did that it wouldn't reboot and about 1 hour later when I tried it again it did the screen was white with nothing on it apart from a small oval in the middle of the screen showing my lock screen and it took 4 hours for it to sort itself out and then it started flickering :( :( please someone help what can I do??!!

Using "x" to reject images when culling

Similar Messages

Maybe you are looking for