Using XML Files for Message Bundles

Hi There,
does anybody knows if there is an easy way to use xml files instead of property files for the strings stored in MessageBundles (Locale)?
Cheers Lars

Oki,
found XMLResourceBundle. No more action on your side is required, Thanx anyway...
Bye

Similar Messages

Debugging mode stopped automatically when using xml file load

Dear Sir,
I am trying to develop a new add-on using xml files for creating new forms. In fact I was using the sample code delivered with the SDK ( WorkingWithXml - under VB.NET). The Problem is that when I am in the debuging mode and after the form load. the application goes out of the debugging mode and stop action.
In fact what i was trying to do first is to create a new menu and then when i click on this menu a new form appear but once the menu is loaded the application stop the debugging mode automatically.
Can somebody clarify to me what I am doing wrong and why the debugging mode is stopped automatically, noting that i am still in the add-on developpement phase.
As i mentioned above i used the WorkingWithXml sample code (VB.NET) and i have adjusted in a way to load menu and then on the menu click i load my form.
Please advice
Best Regards

Hi Mary,
Put your code between in a Try Catch block. In the Catch part use the following:
oApplication.MessageBox("CompError: " & oCompany.GetLastErrorCode.ToString & ", " & oCompany.GetLastErrorDescription & vbCrLf & "Message: " & ex.Message)
This should give you a clearer idea of what the error is all about.
The most likely reason is that there is something wrong with your XML file.
Regards,
Vítor Vieira

Using a local XML file for parsing - iPhone

Good afternoon everyone. I am trying to create an application for the iPhone that will use an XML file for it's data source. I have been attempting to convert the SeismicXML application from the dev center to use a locally stored file, but to no avail. I have it building and running fine, but no data is appearing. Is there anyone that can give me an example of parsing with a locally stored file? Thanks!

NSString *filePath = [[NSBundle mainBundle] pathForResource:@"myFile" ofType:@"xml"];
NSData *myData = [NSData dataWithContentsOfFile:filePath];
if ( myData ) {
NSXMLParser *parser = [[NSXMLParser alloc] initWithData:myData];
[parser setDelegate:myObject];
[parser setShouldProcessNamespaces:NO];
[parser setShouldReportNamespacePrefixes:NO];
[parser setShouldResolveExternalEntities:NO];
[parser parse];
NSError *parseError = [parser parserError];
if ( parseError && error) {
*error = parseError;
// Do post load activity

Need to generate a Index xml file for corresponding Report PDF file.

Need to generate a Index xml file for corresponding Report PDF file.
Currently in fusion we are generating a pdf file using given Rtf template and dataModal source through Ess BIPJobType.xml .
This is generating pdf successfully.
As per requirement from Oracle GSI team, they need index xml file of corresponding generated pdf file for their own business scenario.
Please see the following attached sample file .
PDf file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/BPA_Print_Trx-_output.pdf
Index file : https://kix.oraclecorp.com/KIX/uploads1/Jan-2013/354962/docs/o39861053.out.idx.txt
In R12 ,
     We are doing this through java API call to FOProcessor and build the pdf. Here is sample snapshot :
     xmlStream = PrintInvoiceThread.generateXML(pCpContext, logFile, outFile, dbCon, list, aLog, debugFlag);
     OADocumentProcessor docProc = new OADocumentProcessor(xmlStream, tmpDir);
     docProc.process();
     PrintInvoiceThread :
          out.println("<?xml version=\"1.0\" encoding=\"UTF-8\" ?>");
               out.print("<xapi:requestset ");
               out.println("<xapi:filesystem output=\"" + outFile.getFileName() + "\"/>");
               out.println("<xapi:indexfile output=\"" + outFile.getFileName() + ".idx\">");
               out.println(" <totalpages>${VAR_TOTAL_PAGES}</totalpages>");
               out.println(" <totaldocuments>${VAR_TOTAL_DOCS}</totaldocuments>");
               out.println("</xapi:indexfile>");
               out.println("<xapi:document output-type=\"pdf\">");
out.println("<xapi:customcontents>");
XMLDocument idxDoc = new XMLDocument();
idxDoc.setEncoding("UTF-8");
((XMLElement)(generator.buildIndexItems(idxDoc, am, row)).getDocumentElement()).print(out);
idxDoc = null;
out.println("</xapi:customcontents>");
     In r12 we have a privilege to use page number variable through oracle.apps.xdo.batch.ControlFile
          public static final String VAR_BEGIN_PAGE = "${VAR_BEGIN_PAGE}";
          public static final String VAR_END_PAGE = "${VAR_END_PAGE}";
          public static final String VAR_TOTAL_DOCS = "${VAR_TOTAL_DOCS}";
          public static final String VAR_TOTAL_PAGES = "${VAR_TOTAL_PAGES}";
Is there any similar java library which do the same thing in fusion .
Note: I checked in the BIP doc http://docs.oracle.com/cd/E21764_01/bi.1111/e18863/javaapis.htm#CIHHDDEH
          Section 7.11.3.2 Invoking Processors with InputStream .
But this is not helping much to me. Is there any other document/view-let which covers these thing .
Appreciate any help/suggestions.
-anjani prasad
I have attached these java file in kixs : https://kix.oraclecorp.com/KIX/display.php?labelId=3755&articleId=354962
PrintInvoiceThread
InvoiceXmlBuilder
Control.java

You can find the steps here.
http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

XML file for SEPA Credit transfer

Hi All,
I am working in ECC 6.0. The system was configured to generate XML files for credit transfer as per SEPA guidelines. The files are being created in the application layer. But the line length is being restricted to 255 characters. As per the specifications of a XML file in apllication layer. all information should be contained in one single line.
Secondly the job log for the payment medium creation program contains the below mentioned line among others -
"Incorrect Print Parameter" of message class "0K", message no. 091and message ID I
Can anybody tell me what is going wrong?

HI,
Can you please help me in solving the issue when using the PMW format SEPA_CT.
My co. code currency is EUR and when paying the invoice which is in GBP i am not able to get the currency EUR in the DME file generated by the payment run instead I am getting the currency GBP.
As per the SEPA concept evey payment will be in EUR irrespective of the currency in which the invoice is raised. So please let me know what needs to be done to get the local currency EUR amount the DME file for the payment made against invoice raised in GBP...
Thanks in Advance..
Regards
Sanjeev

How to generate an XML file for an animation of IK armature

Can someone please tell me how to generate an XML file for an animation of IK armature.
I have a 5 keyframe/16 frame animation of a human character made up of a series of moveiclip symbols that is animated with an IK armature. I need the XML information from the animation.
When I go to Commands > Export Motion XML I get the error message "There is more than one object on frame 1" and then nothing happens.
Thank you,
c

I hope that's not the case. I want to write to adobe about it. I think it's a great feature and it functions really well even though it is not a very developed IK tool. My biggest issue with it is ouput options and integration with motion tweens.
I have seen a lot of examples of animators using it online, just no one talked about output. I just feel it hasn't been developed. It can generate a sprite sheet but only for a single pose frame of the animation, and not all the key frames or pose tweens. I find that functionality quite odd, as if adobe just forgot about IK when added in sprite sheets, etc. and the reason it half works is just an accident.

Help in creation of XML file for IDOC postings

Hi All,
Need help if anyone has knowledge/experience in creating XML files for IDOC processing.
We need to design an input file (in XML format) for creation of IDOCu2019s for purchase Invoices through Interface.
We have an existing input file, which is working correctly. We are trying to modify this existing input file for a new Tax Code (Non-deductible inverse tax liability). This tax code is working fine for manual postings. But, through IDOC, tax postings are not correctly triggering.
Could you please confirm if any one has experience on this, so that I can share more details for resolving.
Thanks & Regards,
Srini

Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto

How to create an XML File for Gantt?

Hi Everybody.
I need a Gantt in Web Dynpro ABAP. I need it for the boss to do a Forecast for Vacation. I Hope this is understanding.
Did Anyone know how can i create a XML File for the Gantt at runtime?
Thanks
MSi

Hi Marcus,
the following link is to the JNet/JGantt developer doco
[JNet/JGantt Developer Documentation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/lw/uuid/f010ec31-9658-2910-3c83-c6e62904eceb]
included in this is the:
[Schema for XML|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/webdynpro/jnet_jgantt%20developer%20documentation/schema/xml-spy/jnet-schema.html]
You can use this to build XML to represent a gantt like chart.
I did this to build XML to represent employee avaliablity - although we fronted the gantt through WD Java not ABAP - the java applet called is the same (I believe).
Don't underestimate the work required to tweek your data into a decent layout. It took me days.
There may be tools/api to help generate the XML - I don't know of them - I'd look forward to seeing any other replies to this thread from people who have used/built any. An example of a class that generates JNet XML - CL_SPI_UI_JNET - but this does not seem to be a Gantt display.
Cheers,
Chris

Creation of External table by using XML files.

I am in the process of loading of XML file data into the database table. I want to use the External Table feature for this loading. Though we have the external table feature with Plain/text file, is there any process of XML file data loading into the Database table by using External table?
I am using Oracle 9i.
Appreciate your responses.
Regards
Edited by: user652422 on Dec 16, 2008 11:00 PM

Hi,
The XML file which U posted is working fine and that proved that external table can be created by using xml files.
Now My problem is that I have xml files which is not as the book.xml, my xml file is having some diff format. below is the extracts of the file ...
<?xml version="1.0" encoding="UTF-8" ?>
- <PM-History deviceIP="172.20.7.50">
<Error Reason="" />
- <Interface IntfName="otu2-1-10B-3">
- <TS Type="15-MIN">
<Error Reason="" />
- <PM-counters TimeStamp="02/13/2008:12:15">
<Item Name="BBE-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="BBE-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="ES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="ES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="CSES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="CSES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="UAS-S" Direction="Received" Validity="ADJ" Value="135" />
<Item Name="UAS-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SEF-S" Direction="Received" Validity="ADJ" Value="135" />
</PM-counters>
<PM-counters TimeStamp="03/26/2008:12:30">
<Item Name="BBE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="BBE-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="ES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="ES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="SES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="SES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="CSES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="CSES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="UAS" Direction="Received" Validity="OFF" Value="0" />
<Item Name="UAS-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="PSC" Direction="Received" Validity="OFF" Value="0" />
</PM-counters>
</TS>
</Interface>
</PM-History>
My problem is the Item Name and Direction the value of both(ex PSCReceived or UASReceived) will be treated as the coulmn name of the table and '0' would be the value of that column. I am confused how to create the external table creation program for that.
I would really appreciate your responses.
Regards

How to use XML file as a source in BODS?

How to use XML file as a source in BODS?
Could anyone please help me out for this?

exmpale XML file :
<?xml version="1.0" encoding="utf-8"?>
<MM_RECON_REPORT>
<RPT_DATE>str1234</RPT_DATE>
<RPT_ROW>
    <SRC_EXT_REC_COUNT>123.45</SRC_EXT_REC_COUNT>
    <PRE_TRANS_REC_COUNT>123.45</PRE_TRANS_REC_COUNT>
    <POST_TRANS_REC_COUNT>123.45</POST_TRANS_REC_COUNT>
    <PASS_BAPI_REC_COUNT>123.45</PASS_BAPI_REC_COUNT>
    <TOT_SAP_RETURN>123.45</TOT_SAP_RETURN>
    <TOT_SAP_SUCC_REC_COUNT>123.45</TOT_SAP_SUCC_REC_COUNT>
    <PARTIAL_SUCC_REC_COUNT>123.45</PARTIAL_SUCC_REC_COUNT>
    <TOT_SAP_ERR_REC_COUNT>123.45</TOT_SAP_ERR_REC_COUNT>
    <MM_SUCC_REC_COUNT>123.45</MM_SUCC_REC_COUNT>
    <MM_ERR_REC_COUNT>123.45</MM_ERR_REC_COUNT>
    <CLS_SUCC_REC_COUNT>123.45</CLS_SUCC_REC_COUNT>
    <CLS_ERR_REC_COUNT>123.45</CLS_ERR_REC_COUNT>
    <CP_SUCC_REC_COUNT>123.45</CP_SUCC_REC_COUNT>
    <CP_ERR_REC_COUNT>123.45</CP_ERR_REC_COUNT>
    <VMS_SUCC_REC_COUNT>123.45</VMS_SUCC_REC_COUNT>
    <VMS_ERR_REC_COUNT>123.45</VMS_ERR_REC_COUNT>
    <SOURCE_TYPE>str1234</SOURCE_TYPE>
    <RUN_ID>123.45</RUN_ID>
    <RUN_SEQ>123.45</RUN_SEQ>
    <RUN_DATE>2012-12-13</RUN_DATE>
</RPT_ROW>
</MM_RECON_REPORT>
example XSD file :
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
    <xsd:documentation xml:lang="en">
    XML Schema generated by Data Services
    </xsd:documentation>
</xsd:annotation>
<xsd:simpleType name="DIType-decimal-28-0">
<xsd:restriction base="xsd:decimal">
    <xsd:totalDigits value="28"/>
    <xsd:fractionDigits value="0"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DIType-varchar-200">
<xsd:restriction base="xsd:string">
<xsd:maxLength value="200"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DIType-varchar-10">
<xsd:restriction base="xsd:string">
    <xsd:maxLength value="10"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DATE">
<xsd:restriction base="xsd:date">
</xsd:restriction>
</xsd:simpleType>
<xsd:element name="MM_RECON_REPORT" >
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element ref="RPT_DATE" minOccurs="0" maxOccurs="1"/>
        <xsd:element ref="RPT_ROW" minOccurs="0" maxOccurs="unbounded"/>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
<xsd:element name="RPT_DATE" type = "DIType-varchar-200"/>
<xsd:element name="RPT_ROW" >
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element ref="SRC_EXT_REC_COUNT" />
        <xsd:element ref="PRE_TRANS_REC_COUNT" />
        <xsd:element ref="POST_TRANS_REC_COUNT" />
        <xsd:element ref="PASS_BAPI_REC_COUNT" />
        <xsd:element ref="TOT_SAP_RETURN" />
        <xsd:element ref="TOT_SAP_SUCC_REC_COUNT" />
        <xsd:element ref="PARTIAL_SUCC_REC_COUNT" />
        <xsd:element ref="TOT_SAP_ERR_REC_COUNT" />
        <xsd:element ref="MM_SUCC_REC_COUNT" />
        <xsd:element ref="MM_ERR_REC_COUNT" />
        <xsd:element ref="CLS_SUCC_REC_COUNT" />
        <xsd:element ref="CLS_ERR_REC_COUNT" />
        <xsd:element ref="CP_SUCC_REC_COUNT" />
        <xsd:element ref="CP_ERR_REC_COUNT" />
        <xsd:element ref="VMS_SUCC_REC_COUNT" />
        <xsd:element ref="VMS_ERR_REC_COUNT" />
        <xsd:element ref="SOURCE_TYPE" />
        <xsd:element ref="RUN_ID" />
        <xsd:element ref="RUN_SEQ" />
        <xsd:element ref="RUN_DATE" />
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
<xsd:element name="SRC_EXT_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PRE_TRANS_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="POST_TRANS_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PASS_BAPI_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_RETURN" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PARTIAL_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="MM_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="MM_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CLS_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CLS_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CP_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CP_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="VMS_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="VMS_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="SOURCE_TYPE" type = "DIType-varchar-10"/>
<xsd:element name="RUN_ID" type = "DIType-decimal-28-0"/>
<xsd:element name="RUN_SEQ" type = "DIType-decimal-28-0"/>
<xsd:element name="RUN_DATE" type = "xsd:date"/>
</xsd:schema>
compare the xml vs xsd for better understanding

How to create a Plan.xml file for modification

Hi,
I am trying to create a plan.xml file. Is there any way, I can generate a plan.xml file.
I see a tab in Admin Console in deployments and plan. but there is nothing there. what it has to do with plan.
Thanks
regards
Amir riaz

You can find the steps here.
http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

Efficient searching in a large XML file for specific elements

Hi
How can I search in a large XML file for a specific element efficiently (fast and memory savvy?) I have a large (approximately 32MB with about 140,000 main elements) XML file and I have to search through it for specific elements. What stable and production-ready open source tools are available for such tasks? I think PDOM is a solution but I can't find any well-known and stable implementations on the web.
Thanks in advance,
Behrang Saeedzadeh.

The problem with DOM parsers is that the whole document needs to be parsed!
So with large documents this uses up a lot of memory.
I suggest you look at sometthing like a pull parser (Piccolo or MPX1) which is a fast parser that is program driven and not event driven like SAX. This has the advantage of not needing to remember your state between events.
I have used Piccolo to extract events from large xml based log files.
Carl.

Automate creation of web.xml file for tomcat 4.1.29

hi , this is with ref to Tomcat 4.1.29, if i am correct, each Servlet in the application has to be mentioned in the web.xml file for the Tomcat to know about it. Is there any way to automate the creation of web.xml file , depending on the contents of the Servlet folder of the application. Any way to escape from writing each Servlet name in web.xml file.
rc

Hello,
Maybe you should check if you can use Ant tool to do
that. I am not sure if it can help u.
Zeph.
http://ant.apache.org/
It will, specially if used in conjunction with XDoclets :
http://xdoclet.sourceforge.net/
XDoclet has Ant tasks to generate web.xml files.

Wrong currency in intrastat XML file for Zhech Republic

I'm having problem with intrastat XML file for Zhech Republic currency code. In selection I have defined to have report in EUR currency and all entries are correctly in EUR. But when created XML file the currency code is CZK even values are EUR values. XML field <currencyCode>CZK</currencyCode>.
Why and ow this can be corrected?
Best Regards
Johanna Nissinen

HI,
Can you please help me in solving the issue when using the PMW format SEPA_CT.
My co. code currency is EUR and when paying the invoice which is in GBP i am not able to get the currency EUR in the DME file generated by the payment run instead I am getting the currency GBP.
As per the SEPA concept evey payment will be in EUR irrespective of the currency in which the invoice is raised. So please let me know what needs to be done to get the local currency EUR amount the DME file for the payment made against invoice raised in GBP...
Thanks in Advance..
Regards
Sanjeev

Where are the xml files for code generator of MSAHH5?

I'm generating source files for MSAHH5 and in the source code I can find xml files for generating all entities and DAL for those entities but I can't find anywhere files for MSATableConstants.xsl and MSAPersistanceManager.xsl and if I leave them alone they don't generate any class. I tried all xml in the code-generator folder without luck. What files should I use?
Thanks in advance.

Hi,
    I will answer your question in 2 parts.
1. Which files are used to generate what?????????
For entities:            Entity.xslt+ Entity.xml
For MSATablesContants:   MSATableConstants.xslt+
                         Entity.xml
For MSAPackageManager:   MSAPackageManager.xslt+
                         Entity.xml
For DAL Generation:      DAL.xslt+DAL.xml
2. Where these will be generated?????????
It depends on the path of the project that you are giving. If in the code generator tool when u make a new project give the path as the path of your project in eclipse.
Otherwise if you give path as ./ means the current folder from where you r running classgenerator.jar
you have to manually create folders like
C:\classgenerator\com\sap\crm\handheld\db\dataaccess for DAL classes and similarly for entities etc.
Hope this is clear
anubhav

Using XML Files for Message Bundles

Similar Messages

Maybe you are looking for