Debugging mode stopped automatically when using xml file load
Dear Sir,
I am trying to develop a new add-on using xml files for creating new forms. In fact I was using the sample code delivered with the SDK ( WorkingWithXml - under VB.NET). The Problem is that when I am in the debuging mode and after the form load. the application goes out of the debugging mode and stop action.
In fact what i was trying to do first is to create a new menu and then when i click on this menu a new form appear but once the menu is loaded the application stop the debugging mode automatically.
Can somebody clarify to me what I am doing wrong and why the debugging mode is stopped automatically, noting that i am still in the add-on developpement phase.
As i mentioned above i used the WorkingWithXml sample code (VB.NET) and i have adjusted in a way to load menu and then on the menu click i load my form.
Please advice
Best Regards
Hi Mary,
Put your code between in a Try Catch block. In the Catch part use the following:
oApplication.MessageBox("CompError: " & oCompany.GetLastErrorCode.ToString & ", " & oCompany.GetLastErrorDescription & vbCrLf & "Message: " & ex.Message)
This should give you a clearer idea of what the error is all about.
The most likely reason is that there is something wrong with your XML file.
Regards,
Vítor Vieira
Similar Messages
-
How to store the data instead of memoryengine to database when use XML file
Hi Experts,
I have doubt which is into XML to database data transfer.
While transferring the data from XML to database the tables will be store in memory for the xml files, my aim is instead of storing this in memory engine
is there any way to store the data in to the data base itself..
I am assuming when the data size increases say for example huge amount data, storing this much of data is big issue here right, so to avoid this is there any way to store
this data directly in the database level.
Please understand my requirement or else I have the good explanation about my requirement and please assist me how do this job....
Thx,
Sahadeva.Hi Experts,
For this job I have applied the
jdbc:snps:xmll?f=/mydata/xml/file.xml&s=wrk_admin&dp_driver=oracle.jdbc.driver.OracleDriver&dp_url=jdbc:oracle:thin:@localhost:1521:xel&dp_user=wrk_admin&dp_password=bPyXS2eRXw8fWnKEmTYSEf&dp_schema=wrk_admin&dp_doc=Y
my schema name is wrk_admin
xml file name is mydata
jdbc driver: localhost:1521:xe
Encoded password: I have encoded the pwd from cmd:c:oracle\oracle_odi1\oracledi\agent\bin\encode wrk_admin
The above are the details I have applied to my ODI studio for creating the dataserver.
After applying this I got the following error.
Could you please correct me here if I am wrong...
jdbc:snps:xml?param1=value1¶m2=value2&...
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1118)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:420)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:860)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:806)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:165)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:161)
Thx,
Sahadeva. -
How can I make the status bar hide automatically when using safari?
How can I make the status bar hide automatically when using safari?
When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen. -
Code runs fine in debug mode but hangs when compiled in release mode
I am struggling with the following problem. I have code which runs fine when it is executed in debug mode. However, when I compile it in release mode and run the executable, the code freezes and does not work. The code acquires images from a Hamamatsu camera. In the debug mode I am able to continuously acquire images. However, in the release version, the code hangs after acquiring the first image.
I am using LabWindows/CVI version 7.
I would greatly appreciate if I can get any help/suggestions in resolving this problem?
Thanks!
Regards,
Sripad
Solved!
Go to Solution.Sripad:
If you search this forum for "debug release crash" or "release version crash" or similar phrases, you'll find that this is a pretty common question. Look through the other posts you find here to see if anything is applicable to you.
The debug version does some things like padding variables so you can sometimes overrun your declared variable space without overwriting the next variable. In the release, the variables are packed, so if you overrun one, you are overwriting another. Just one possible difference.
You can do some things in your release code to see where things get lost, like (temporarily using printf statements after multiple statements at the start and end of your loop to try to identify that failing line of code.
Look through other threads to find other ideas. -
Creation of External table by using XML files.
I am in the process of loading of XML file data into the database table. I want to use the External Table feature for this loading. Though we have the external table feature with Plain/text file, is there any process of XML file data loading into the Database table by using External table?
I am using Oracle 9i.
Appreciate your responses.
Regards
Edited by: user652422 on Dec 16, 2008 11:00 PMHi,
The XML file which U posted is working fine and that proved that external table can be created by using xml files.
Now My problem is that I have xml files which is not as the book.xml, my xml file is having some diff format. below is the extracts of the file ...
<?xml version="1.0" encoding="UTF-8" ?>
- <PM-History deviceIP="172.20.7.50">
<Error Reason="" />
- <Interface IntfName="otu2-1-10B-3">
- <TS Type="15-MIN">
<Error Reason="" />
- <PM-counters TimeStamp="02/13/2008:12:15">
<Item Name="BBE-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="BBE-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="ES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="ES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="CSES-S" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="CSES-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="UAS-S" Direction="Received" Validity="ADJ" Value="135" />
<Item Name="UAS-SFE" Direction="Received" Validity="ADJ" Value="0" />
<Item Name="SEF-S" Direction="Received" Validity="ADJ" Value="135" />
</PM-counters>
<PM-counters TimeStamp="03/26/2008:12:30">
<Item Name="BBE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="BBE-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="ES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="ES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="SES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="SES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="CSES" Direction="Received" Validity="OFF" Value="0" />
<Item Name="CSES-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="UAS" Direction="Received" Validity="OFF" Value="0" />
<Item Name="UAS-FE" Direction="Received" Validity="OFF" Value="0" />
<Item Name="PSC" Direction="Received" Validity="OFF" Value="0" />
</PM-counters>
</TS>
</Interface>
</PM-History>
My problem is the Item Name and Direction the value of both(ex PSCReceived or UASReceived) will be treated as the coulmn name of the table and '0' would be the value of that column. I am confused how to create the external table creation program for that.
I would really appreciate your responses.
Regards -
How to use XML file as a source in BODS?
How to use XML file as a source in BODS?
Could anyone please help me out for this?exmpale XML file :
<?xml version="1.0" encoding="utf-8"?>
<MM_RECON_REPORT>
<RPT_DATE>str1234</RPT_DATE>
<RPT_ROW>
<SRC_EXT_REC_COUNT>123.45</SRC_EXT_REC_COUNT>
<PRE_TRANS_REC_COUNT>123.45</PRE_TRANS_REC_COUNT>
<POST_TRANS_REC_COUNT>123.45</POST_TRANS_REC_COUNT>
<PASS_BAPI_REC_COUNT>123.45</PASS_BAPI_REC_COUNT>
<TOT_SAP_RETURN>123.45</TOT_SAP_RETURN>
<TOT_SAP_SUCC_REC_COUNT>123.45</TOT_SAP_SUCC_REC_COUNT>
<PARTIAL_SUCC_REC_COUNT>123.45</PARTIAL_SUCC_REC_COUNT>
<TOT_SAP_ERR_REC_COUNT>123.45</TOT_SAP_ERR_REC_COUNT>
<MM_SUCC_REC_COUNT>123.45</MM_SUCC_REC_COUNT>
<MM_ERR_REC_COUNT>123.45</MM_ERR_REC_COUNT>
<CLS_SUCC_REC_COUNT>123.45</CLS_SUCC_REC_COUNT>
<CLS_ERR_REC_COUNT>123.45</CLS_ERR_REC_COUNT>
<CP_SUCC_REC_COUNT>123.45</CP_SUCC_REC_COUNT>
<CP_ERR_REC_COUNT>123.45</CP_ERR_REC_COUNT>
<VMS_SUCC_REC_COUNT>123.45</VMS_SUCC_REC_COUNT>
<VMS_ERR_REC_COUNT>123.45</VMS_ERR_REC_COUNT>
<SOURCE_TYPE>str1234</SOURCE_TYPE>
<RUN_ID>123.45</RUN_ID>
<RUN_SEQ>123.45</RUN_SEQ>
<RUN_DATE>2012-12-13</RUN_DATE>
</RPT_ROW>
</MM_RECON_REPORT>
example XSD file :
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
<xsd:documentation xml:lang="en">
XML Schema generated by Data Services
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType name="DIType-decimal-28-0">
<xsd:restriction base="xsd:decimal">
<xsd:totalDigits value="28"/>
<xsd:fractionDigits value="0"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DIType-varchar-200">
<xsd:restriction base="xsd:string">
<xsd:maxLength value="200"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DIType-varchar-10">
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DATE">
<xsd:restriction base="xsd:date">
</xsd:restriction>
</xsd:simpleType>
<xsd:element name="MM_RECON_REPORT" >
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="RPT_DATE" minOccurs="0" maxOccurs="1"/>
<xsd:element ref="RPT_ROW" minOccurs="0" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="RPT_DATE" type = "DIType-varchar-200"/>
<xsd:element name="RPT_ROW" >
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="SRC_EXT_REC_COUNT" />
<xsd:element ref="PRE_TRANS_REC_COUNT" />
<xsd:element ref="POST_TRANS_REC_COUNT" />
<xsd:element ref="PASS_BAPI_REC_COUNT" />
<xsd:element ref="TOT_SAP_RETURN" />
<xsd:element ref="TOT_SAP_SUCC_REC_COUNT" />
<xsd:element ref="PARTIAL_SUCC_REC_COUNT" />
<xsd:element ref="TOT_SAP_ERR_REC_COUNT" />
<xsd:element ref="MM_SUCC_REC_COUNT" />
<xsd:element ref="MM_ERR_REC_COUNT" />
<xsd:element ref="CLS_SUCC_REC_COUNT" />
<xsd:element ref="CLS_ERR_REC_COUNT" />
<xsd:element ref="CP_SUCC_REC_COUNT" />
<xsd:element ref="CP_ERR_REC_COUNT" />
<xsd:element ref="VMS_SUCC_REC_COUNT" />
<xsd:element ref="VMS_ERR_REC_COUNT" />
<xsd:element ref="SOURCE_TYPE" />
<xsd:element ref="RUN_ID" />
<xsd:element ref="RUN_SEQ" />
<xsd:element ref="RUN_DATE" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="SRC_EXT_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PRE_TRANS_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="POST_TRANS_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PASS_BAPI_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_RETURN" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PARTIAL_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="MM_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="MM_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CLS_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CLS_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CP_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CP_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="VMS_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="VMS_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="SOURCE_TYPE" type = "DIType-varchar-10"/>
<xsd:element name="RUN_ID" type = "DIType-decimal-28-0"/>
<xsd:element name="RUN_SEQ" type = "DIType-decimal-28-0"/>
<xsd:element name="RUN_DATE" type = "xsd:date"/>
</xsd:schema>
compare the xml vs xsd for better understanding -
Error when using %@ include file="/test.jsp"%&
UsingNitrox version 2.1 M3 (build 419 06022005):
with jdk version: 1.5.0_03 and Tomcat 5.5.9
This is the error :cry: when using <%@ include file="/test.jsp"%> in jsp:
Severity 2
The type java.lang.Object cannot be resolved. It is indirectly referenced from required .class files (test.jsp)
It used to work in previuos version of Nitrox. I can't use struts tiles because the tiles content is dynamic (run time) and I need it to be static (at compile time).
Have you encountered this problem? What is the fix? Nitrox bug?
I need your help please,
AlbertoM7,
I found the problem :wink: . In the java Build path having the default (ALL) is not picking up the content of the package. I had to use add multiple and include all the folders and subfolders (many L) in my packages. After that I added *.java and *.properties to select all the java files. Now it is working. I assume this is a bug in Nitrox. The default ALL should include the all the files in the path.
Thanks,
Alberto -
Using XML Files for Message Bundles
Hi There,
does anybody knows if there is an easy way to use xml files instead of property files for the strings stored in MessageBundles (Locale)?
Cheers LarsOki,
found XMLResourceBundle. No more action on your side is required, Thanx anyway...
Bye -
Publish app that uses XML file.
Hi, I want to create an App which uses XML file as a data source. I want that XML file is online file on my server downloaded in first use, and looking for changes every time user want to do this, so i have a legal question if apple can release my app in AppStore or they can block it?
Thanks,
I have legal right, this is my XML file on my server.
My main concern is that changing XML in fact i may change entire app. And this make me think apple would not like it. So my question is: maybe someone had similar experience. -
3 ?'s:
1 Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
2. Message week ago "Files not being backed up to Time Capsule";
3. When using Mac Mail I'm prompted for password but none work
Thanks - JThanks Allan for your quick response to my amateur questions.
Allan: I'm running version Mac OS X Version 10.6.8 PS Processor is 2.4 GHz Intel core 15
Memory 4 gb 1067 MHz DDr3 TN And @ 1983-2011 Apple Inc.
I just "Updated Software" as prompted.
Thanks for helping me! - John Garrett
PS.
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i5
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f17
Serial Number (system): W8*****AGU
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host> -
My outgoing email as stopped working when using Outlook for mac 2011. I have deleted and reinstalled the account twice. I have 11 gig free on my iCloud account. The outgoing server is set at smtp.mail.me.com using port 587. If I was able to reinstall the account, I am positive I have the correct password. I can log into my iCloud accout using the same credentials.
Any suggestions?I called Microsoft to fix my problem...for those maybe having the same issue, I was told by the Tech to use this outgoing server setting - p06-smtp.mail.me.com
All is working fine since doing so. -
Importing data- using xml file into HANA Table
Hi,
We are using (HDB STUDIO ) - revision 60.......
Is it possible to import data using XML file into HANA table (Master,Fact tables)?
(Without using any intermediate adapters for conversion of data.....)
Can any one suggest us........
Thank you.Hi user450616
I am a bit confused about what you are trying to achieve.
Are you:
1. importing a CSV file into APEX
2. adding an extra column to the Oracle Table
3. populating the extra column with the CSV filename?
Let us know if this is what you are trying to do.
Cheers,
Patrick Cimolini -
I started a project using Premier 9. Then I upgraded to 13, edited and saved my existing project several times successfully. Decided that it appeared 13 was working well and I no longer needed 9 and 11 (both Photoshop Elements and Premier Elements) so I uninstalled them using the Control Panel app. Now 13 stops working when I try to load my project.
I have since uninstalled/re-installed/rebooted everything in various sequences many many times with no luck. I even purchased and installed another copy of 9 (since the original was a download and I could not find my notes & serial numbers)! The 9 install encountered a problem "an installation process has encountered an error while installing", it stopped, then rolled the install back so I have nothing for 9.
HELP
Paul LPaulL
Probably good idea to recreate the version 9 project in version 13. Investment of time in troubleshooting version 9 is questionable as you say.
At this point, I would leave Premiere Elements 9.0/9.0.1 installed, just do not open it.
When you are between Premiere Elements 13 projects and you want to get rid of Premiere Elements 9.0/9.0.1,
consider
1. Deactivate the program from an opened project's Help Menu/Deactivate...close out of the program.
2. Uninstall the program the usual Control Panel way
3. Do a free ccleaner run through (regular cleaner and registry cleaner parts) to get rid of leftovers from incomplete installs or uninstalls.
CCleaner - Download
Note: Deactivation is not the same as uninstall.
Critical - after a project is saved closed, never move, delete, or rename files/folders that were imported into the project after the project's save close.
When you import files into a project, all you get are copies of the originals. But, those copies need to trace back to the originals in the location where
they were when they were first imported into the project. More on that later as indicated.
Please let me know if any questions or clarification needed on any of the above. Are there any Elements Organizer consideration in any of this?
If so, I would convert the Elements Organizer 9 catalog in Elements Organizer 13 before uninstalling Premiere Elements 9.0/9.0.1.
Thanks for the follow ups.
ATR -
I have a small .fla file that uses xml files to bring in the
data. It works great. However, if i use a tag such as a <b>
bold </> tag, the file shows up as "null" when i preview the
swf.
Does anyone have any ideas? Is it something to do with the
tags in XML, or how flash reads them?
Any suggestions would be welcomed
ThanksFor instance, i want the "upcoming shows" to be in bold.
Thank you again
<?xml version="1.0" encoding= "UTF-8"
?><products><product>
Upcoming Shows
Dec 1 2007 8:00P
House Show Utah
Dec 12 2007 8:00P
House Show Utah
Dec 28 2007 7:00P
House Show Utah
Jan 6 2008 9:00A
SMCChurch - Draper Draper
Jan 11 2008 8:00P
Park City Bread and Bagel Park City, Utah
Jan 13 2008 10:15A
SMCChurch - Daybreak Daybreak
Jan 20 2008 10:00A
Hidden Valley Presbyterian Draper, Utah
Jan 24 2008 8:00P
University of Utah Salt Lake City, Utah
Feb 1 2008 8:00P
The Refuge San Ramone, California
Feb 16 2008 8:00P
Skifest Brighten
Feb 17 2008 8:00P
Skifest Brighten
Feb 18 2008 8:00P
Skifest Brighten
Nov 26 2008 8:00P
Mt. Olympus Presbyterian Salt Lake City, Utah
</product></products> -
How to xml file load in actionscript 3.0
Hi surfers,
How to xml file load in actionscript 3.0, How to get xml data.
Thanks in Advance.
Pls give me ASAP, i'm struggle here.Search Google using "AS3 XML tutorial".
Maybe you are looking for
-
Itunes 10.6 isn't working with Windows 7
Every since I updated my Itunes to 10.6 as it requested me to, but Itunes won't work. I have uninstalled, reinstalled, deleted temp files, even created a new user account. Noting works. Now I will admit that the new account allowed me to install I
-
Oracle 10g Express Edition and Forms 6i
Hi, Need to know if Oracle 10g express edition supports forms 6i or not? Please advise. Thanks you very much.
-
Crash during CD import - please help
When trying to import (Apple lossless in my case) iTunes crashes after a few songs quite randomly. This happens to all CDs I try. What a mess and how frustrating.... Does anybody have an idea, what could be the problem? I'm running the latest mainboa
-
I ve iPhoto on my Mac which my ex installed. For updates its shows his ID. How can i change the Apple ID in iPhoto?
-
Inter plant profit determination on Consolidation
Dear Gurus/Experts, I am facing a scenario in Consolidation in an Indian Implementation project. The Client is a manufacturing company and has two plants. The production of 1st plant is mostly captive consumed by 2nd plant and also sold outside. Now