USSD request cannot be sent
When I am taping USSD request *300# in my iPhone 3GS (4.3.5) it even is not sent to Operator.
When I am taping USSD request *300*1# I got error 'Unknown performing request. Unknown Error'.
Same on iPhone 4, very dissappointing
https://discussions.apple.com/thread/4267876
Similar Messages
-
I have Iphone4 brought from at&t USA(carrier locked) and i am in india now, i contacted at&t and requested for an unlock for me to use with indian carriers.
I got an email confirming the unlock has been completed from at&t and asked me to connect the device to itunes and do a back&restore, after the restore process i get an error message on itunes "your request cannot be processed, please try again after sometime" i tried it with my airtel sim card and also at&t sim card but did not work. I contacted at&t and they confirmed that the unlock request was successful but i still get the same error.
Please kindly help me if i need to do someting to be able to activate and unlock my iphone4Excuse me. I am on a contract with O2 with an iphone 4s, suddenly xmas day it said "no service", took it to o2 who sent it to apple factory who refused to repair it because a screw missing. I wouldnt know have never opened phone in my life,wouldnt know how to, then went direct to Apple Regent St London who also said "screw missing, warrenty void, then produced a phone just out of contract due to upgrade,a vodaphone carrier 3gs, it was unlocked but then told by apple the owner had to go to vodaphone and get it unlocked on their books which could take up to 48 hours, it is now 72 hours later and i have the same error despite backing up old phone with i tunes and i cloud,am very angry and am paying alot for a contract every month, all i can see is "no service and waiting for activation" and all ths started when I upgraded to IOS 6.Am extremely upset and still under warranty but no one seems to want to help me to connect to WiFI, i cannot keep going to Apple Regent Street at lunchtime and be shooed of with excuses, this replacement phone 3gs should work and it doesnt. Am extremely annoyed with the info i have been provded wth by Apple staff.Now I havent had a phone since 25th december.
-
Help with saved pdf' s,"more request cannot be completed.Service book information not found"
Hey from south africa,I'm using the curve 8520 on MTN service provider.I came across a problem a while ago where I had to setup my email address again,I had an email with some pdf's saved.They were working well until the re-setup,now when I try to load ones that I haven't read it gives me the error "More request cannot be completed.Service book information not found".I've sent the email back to myself but no luck,help.Thanks in advance.
You need to reset your email account again on your device & send the service books from the same interface on your device. Wait for the 30mins & register now yourself from the handset itself by following the below steps-click on Option Application-click on Advanced - Click on Host Routing table - Click menu key - select Register now option & Click, Follow these steps twice. Now go into your email application & click on it. Then press the menu key & scroll down,you can see Reconcile now option, Click on it twice !
Now try to open that PDF again ! -
We are having some problems in Exchange when customers send us emails with large attachments. It doesn't happen all the time which is weird.
The emails show up fine on iPhones although it is very slow to show the whole email and attachment.
In OWA it gives an error - Error: Your request cannot be completed right now. Please try again later.
The emails never make it to our computer email program, Mac Outlook 2011Hi,
What’s your Exchange 2013 version?
According to your description, I understand that the message which is sent from external customers with large attachments can’t be opened in OWA and Outlook for Mac for Exchange users. Is it rights?
If that is the case, please confirm if the issue only happens with the large attachment messages. Please confirm if the message with no attachment sent from the same customer can be received and shown correctly in OWA.
Please recycle the application pools in IIS Manager to have a try. If it doesn’t work, please change the OWA to use Conversation view then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support -
Calendar Invintation - You response to the invitation cannot be sent.
I can send responses from my iPhone4 to normal MS Exchange/Outlook invitations.
However, I receive the error message "Calendar Invintation - Your response to the invitation cannot be sent" when I respond from my iphone to an existing appointment that has been "updated" with a new date or time.
Any help is appreciated. Thanks in advance...I have a working case with Apple Tier 3; my rep is working with engineering team and may now be handed to Enterprise Team.
Thus far iOS5 Beta 3 same error although the main Exchange Account user can now accept the meeting requests, yet unfortunately the secondary Exchange Account user - in Outlook terms the full Author permissioned delagate - still CANNOT accept meeting requests intended for the main Account user.
Oddly enough iPad iOS still things the email recipient of the meeting request is the person invited to th eactual meeting. VERY odd. -
"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!
lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that -
UWL: The request cannot be started from the Business Workplace?
Hi All
Please assist I am currently trying to execute the standard leave request approval within the UWL.
This is the standard leave approval screen for workflow template WS12300111.
I get the below error in a SAP ECC easy web screen.
The request cannot be started from the Business Workplace
Message no. HRTIM_ABS_REQ066
Can anyone give me any insight to this as I have made multiple changes tothe UWL config.
Regards
MaahirBY seeing the error message I think you might have not registered the task in the Portal, as you are have mentioned easy web screen
1. When ever you are trying to execute the workitem from the UWL and you are able to See the SBWP SAP inbox in the browser then it means that the task of the workflow is not registered in the portal.
2. Please ask your portal team to register the task in UWL with corresponding visualization parameters.
[check for the parameters that are to be configured|http://help.sap.com/saphelp_nw04/helpdata/en/20/f0c82c9f6748c58d9ea14b3bbed93a/frameset.htm]
You cannot execute a leave workitem from the Inbox. if you try to execute then it prompts the error message that you have mentioned.
Try to do check all the below points.
1. Check whether the task TS12300097 is registered in the SWFVISU txn it should be using a Java Application. with the parameters
APPLICATION LeaveRequestApprover
DYNPARAM wi_id=${item.externalId}
PACKAGE sap.com/ess~lea
2. Second thing is make the task as General Task from the PFTC txn. so that the agent can approve
3. Ask the portal guys to register this task in the XML file where all the application specific task's are registred. and then try to execute the workitem, this time it will show you the leave request application. -
My office is saying its an unlicensed product and it prompts me to re install. It come up with Microsoft Activation Wizard then when I select to activate software via the internet an error comes up saying:
Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )
Please can you help me? I have tried pressing shift and right click an using system administrator but still not working. I've called the UK helpline and have been cut off twice after repeating myself to the person on the other end. May be easier
to try and get some assistance on here?Hi,
This error can indicate a permissions issue in the registry and/or other operating system issues.
Here is a
blog post which descripts some fixes to this specific error:
Check the Device Manager first to determine whether the issue was caused by an underlying operating system issue.
If it's not an issue with the operating system, try the rest steps descripted in the blog to troubleshoot the issue.
Please have a try and feel free to post back with any findings.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
What does this error mean?! " your request cannot be processed, error code 1009".
Read through this article for iTunes Store troubleshooting:
http://support.apple.com/kb/TS3297 -
i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
Thanks beforehand!!!Error
what is error code 1009? -
I own a iPod touch and I have an iTunes account but all i can download is podcasts no games or music.when I try to download games it says "request cannot be completed " could there be a problem with it ?
Please helpHonestly, these are WAGs but they're all that I can think of.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
Spool requests are being sent the the B9 printer queue(RSNAST00).
Hi gurus,
has anyone found a fix for this issue? i'm currently experiencing the same issue and would like to know how i can fix this..
Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.Post Author: Stephen@Azzu
CA Forum: General
Nobody know the answer to this one? Stephen@Azzu:Here's a good one...I'm using Crysal Reports XI (fully service packed) and the reports I have created are being used in a VB.Net application. I have no problems whatsoever in printing the reports, everything is fine. However, when the report is sent to the printer, the printer queue displays 'document' as the, err, document name. I'd like it to say something more relevant, such as the document number the user selected.So I've tried setting the ReportDocument.Name but wait, it's read only!? How about the summary info? No change. Filename? No change either. I've browsed the internet, searched the knowledge base and found nothing. So my question is this...How do I get the printer queue to display an appropriate name for my document?Stephen -
Spool requests are being sent the the B9 printer queue.
Hi gurus!
has anyone found a fix for this issue? i'm currently experiencing the same issue and would like to know how i can fix this..
Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request. -
JJust wondering why an email or text message cannot be sent to prepaid customers to let them know another card is needed in order to keep their service? Other carriers do this
Perhaps you can sign into your MyVerizon account online and see if the options are available, but not turned on.
-
For the past week I have not been able to send both simple and attached messages through my icloud e-mail.
The error reads: this message cannot be sent at this time. i have the latest version of Firefox, I have even changed my password in hopes that this would resolve the issue, but alas, it hasn't worked. HELP!This is a terrible customer experience for Apple users. I have been dealing with this same issue since April 2012; all used to work just fine and then suddenly -- "Cannot send message" error appears.
When is Apple going to fix this? I have two iPads and an iPhone but often need to access files from my PC (next time, it'll be a Mac),
Very frustrating.
Maybe you are looking for
-
How do I email (or share) pdf files I have stored on my Galaxy Note II?
I have been using Galaxy Note 2 and used to be able to send pdf files using Adobe Reader to myself and to others. I believe there used to be a "share option" at the top which allowed me to do this. After updating Adobe Reader, this option disappeared
-
How to move movies from an old library?
I am consolidating two copies of my iTunes library. One copy has movies that the other does not. I am decommissioning the old library. How do I move the movies from the old library to the new library?
-
Script select parent group by layer
I have complicated workflow in photoshop in which i often use selection of layers by ctrl+click (auto-select is unchecked and selecting layers is chosen) That works good for me. But some time i need quickly select parent group of active layer (only o
-
How to improve horrible camera quality on new 11" mac book air?
Any ideas?
-
I can't update from 4.3.1 to 4.3.2 on my new ipad 2 pc version
Everytime I try to update I get an error message that my update timed out because of a network problem but my internet connection is very good and I can install new apps on the ipad. Thanks for any and all help. IceJoki