Utilitaire air port ne détecte pas mon time capsule sur mon imac

l'utilitaire aireport de mon Imac ne détecte pas mon time capsule, je me connecte sur internet sans pb mais je ne parviens pas à connecté l'imprimante qui est sur le time capsule,  en passant mon MacBook pro se connecte bien et j'ai pu installé l'imprimante.
merci

Bonsoir - s'il vous plaît demander en anglais.
Merci,
Charlie

Similar Messages

  • Itunes ne détecte pas mon nouveau 5s, que faire ?

    itunes ne détecte pas mon nouveau 5s, que faire ?

    J'ai utilisé Netissime pour le site de mon frère et cela n'a posé aucun problème. Leur site: http://www.netissime.com/ j'ai payé pour son site 10 euros par an.
    Il propose aussi des "webhosting" (hébergement de votre site), cela est obligatoire si vous n'avait pas Mobileme. Apparemment ils offrent aussi le nom de domaine avec l'hébergement.
    Bon courage
    Thierry
    Message was edited by: ThierryR

  • How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    You can direct connect your MBA to the LaCie via USB 2 cable.  If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it.  Time Machine can access it either way.

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • Using time capsule model A1409 and trying to use it as only backup. Already have Verizon wireless router. Do not know which cable port to use in back of time capsule. And also it is asking for password. Have tried all of mine and it will not work.

    Want to us my time capsule model A1409  as only backup. 2 TB hard drive.
    Already have Verizon wireless router. Do not want to use Time capsule as router, only back up for iMac.
    Do not know which cable port to use in back of time capsule to Ethernet port back of my iMac.
    And also it is asking for password for the server John Garland's Time Capsule so Time machine can access it..
    Have tried all of passwords can think of and none work.
    Held the reset button for one second on back of capsule and do not see if anything happened.
    What a conundrum.
    Appreciate any help to get this working.
    Thanks,
    John R

    I have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
    Mine is wiredup thus;
    Eth cable from iMac to modem (not the WAN port should you have one),  then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
    I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
    and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
    Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
    Alan

  • Je ne trouve pas ma time capsule

    Bonjour, ayant deja trouver ma time capsule, au dernier démarrage de mon mac, la time capsule etait introuvable, j'ai donc désactiver time machine, rechercher la time capsule sur airport puis réactiver ma time capsule sur time machine, toujours rien..... ai-je oublier queleque chose?
    Merci de me répondre au plus vite.

    Quand at-elle été approuvée par Apple?
    Avez-vous le relâchez à vendre dans le magasin?
    Quel est le nom de l'application?

  • I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?

    I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?

    Check here, if this can help:
    http://support.apple.com/kb/HT4670?viewlocale=en_US

  • New MacBook Air: questions about how to network (AirPlay, Time Capsule, Apple TV, etc)

    Hi guys,
    I am the new owner of a MacBook Air 13" and I've decided to upgrade my home network. Can one of you please help me identify the additional products I need to purchase in order to achieve my desired goals?
    Here is what I want to do:
    * I want to have a large, local, networked hard disk where I can store thousands of photos (iPhoto library) - looks like time capsule or possibly Airport Extreme would be good here
    * I want to access this iPhoto library from my MBA, MBP, and iPad 2. The photos will not be stored locally on any of these devices. Is this possible, and would I experience significant slowness due to this setup? Basically i want a local cloud with massive storage.
    * I could also be tempted to store my iPhoto library in Dropbox but I wonder if the laptops etc would support this? Also this much storage could get pricey.
    * I would like to stream music from services like Pandora and Spotify to my home theater system, which has all kinds of optical / coponent connections (Denon receiver). Ideally I'd like to do this from any of my devices including iPad and even iPhone. I do not use iTunes.
    * I would like to stream content from my devices to my TV including photos and videos, as well as basic mirroring functionality. Given I currently stream Netflix etc through Xbox this is the least important of all my desires. My tv has things like hdmi connections.
    So guys do you think I can do this? Particularly the iPhoto part. Im really looking for a seamless experience in accessing my photos from any laptop.
    Any tips on exactly what products I need to buy would be greatly appreciated. 

    Pappasbike, welcome to the discussions!
    "Now my confusion comes from reading about setting the TC in bridge mode."
    "The TC is only a foot or two way from the AEBS"
    Last item first....if the TC is this close, it might make more sense to connect the two devices together with an ethernet cable. (Always use ethernet connections when possible for faster speeds and more reliable connections.) You would connect one end of the ethernet cable to one of the LAN ports on the Extreme and the other to the WAN port on the Time Capsule.
    Bridge Mode....You only want one router doing DHCP and NAT and that is being done by the Extreme according to your post. Since the Time Capsule is also a router, you would want to configure it in Bridge Mode so that you will avoid IP conflicts and double NAT errors on your network. Do this as follows:
    Open Airport Utility and click on Manual Setup for the Time Capsule.
    Click on the Internet icon at the top of the pane.
    Now look for the "Connection Sharing" setting near the bottom of the pane. Select "Off (Bridge Mode)
    Click Update to save your new settings.

  • Port Mapping is not working on Time Capsule

    I have replaced my Airport Extreme with a Time Capsule for back up purposes, but the Port Mapping functionality is not working as it did on the Airport Extreme.  I have my security camera DVR connected to the network and am using Dynamic DNS to resolve the WAN IP Address.  HAs anybody any experienced  this problem with Time Capsule?

    This is just a guess, but if you still have that AirPort Extreme, you might plug it in long enough to have AirPort Utility do a File >Export Configuration File, then reconnect the Time Capsule and do a File > Import Configuration File.  Once that's done you may have to do a little adjustment to account for the disk drive.

  • How to unblock UDP ports from the firewall of the Time Capsule

    Hello i just bought a time capsule and i am trying am using it as a router. I am trying to use Shakespeer
    that is like a server where you share files within the University,it runs with Dtella. However, when y try to get online a message tells me that the firewall of the router is blocking the UDP ports needed....how do i unblock those UDP ports so i can get online?
    Here is the message:
    In order for Dtella to communicate properly, it needs to receive UDP traffic
    [19:14] <*Dtella> from the Internet. Dtella is currently listening on UDP port 4000, but the
    [19:14] <*Dtella> packets appear to be getting blocked, most likely by a firewall or a router. If
    [19:14] <*Dtella> this is the case, then you will have to configure your firewall or router to
    [19:14] <*Dtella> allow UDP traffic through on this port. You may tell Dtella to use a different
    [19:14] <*Dtella> port from now on by typing !UDP followed by a number.

    Hello albertoPeralta. Welcome to the Apple Discussions!
    To open ports on the Time Capsule, you would use the AirPort Utility to configure Port Mapping.
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the Shakespeer host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Public UDP Port(s): 4000
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 4000
    o Click "Continue"

  • Mon Ipod ne détecte pas mon réseau WiFi

    Bonjour,
    Voila je viens de m'acheter un ipod touch 4 blanc (8go) mais il ne veut pas détecter mon réseau wifi..
    Comment faire?

    http://support.apple.com/kb/TS1398?viewlocale=fr_FR

  • Why does my new macbook air keep crashing i.c.w. Time Capsule!!!?

    I bought my new MBA 11" @ the apple store eaton centre in Toronto. Since my purchase i dec 2010 the MBA crashed often but i thought this was normal (once a week).
    Now i connected a brand new Time Capsule & Airport Express (bought @ apple.com) and now it crashes every 30 minutes!!!
    --when i try to copy data to the time capsule it crashes after 1,5 gb.
    --when i'm listening music via Airport Express the MBA crashes after 20 minutes.
    I get a ' filter'  over my screen with in several languages that i need to reboot....
    I tried to get support at Apple (via phone) but the suggested that i should visit iCentre (in Ede, The Netherlands were i live).
    They took my Apple in repair. Got it for over a week and then they told me that the had run some test and that there was nothing wrong... The invoice was euro 79,-!
    ...At home i tried to copy files to my Time Capsule and the machine crashes again.... (nothing wrong???)
    Why can't i get normal support on this expensive machines....!!!???

    Backing up other Ethernet doesn't prevent access via Wi-Fi.
    If the Time Capsule creating a wireless network?  If not, you'll need to configure it to do so in order to allow the MBA to connect to it.  If it does, can you connect the MBA to the Time Capsule's network?
    Depending on the amount of data you want to transfer, using a USB-to-Ethernet adapter would help things run faster.

  • Ma voiture ne detecte pas mon iphone 4s en bluetooth

    ma voiture ne détecte pas mon iPhone 4s en bluetooth

    si tu as Localiser comme application, tu peux . Sinon, désolé

  • Air port express not found by my mac

    Hallo all, I want to extend my wlan, therefore I want to install an additional air port. I have already a time capuse with air port. Now my question:
    Do I neet to connect the new air port with a wire? I thougt the connection is wireless? Unitl now the new air port is not found by my mac within the utility air port program. Why? Please help! Thank you, Kailash

    To help facilitate setting up your extended network, I would recommend the following:
    Perforrm a "factory default" reset on the AirPort Express base station.
    Temporarily connect the Express to the Time Capsule using an Ethernet cable between them.
    Once you have configured the extended network, you can now disconnect the Express from the TC and place it at the desired location.

  • I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

    I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

    Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
    but air port still does not see it.
    Not sure what you mean by "air port" here.

Maybe you are looking for