Utility to keep track of what files a selected application accesses?

Hi there!
I’m hoping to find a troubleshooting utility (or maybe set of command line instructions?) that I’ve not yet run across ...
Basically, it would allow me to +log or track what files a selected application accesses on disk+ (and perhaps when each access occurs (date/time), whether read/write, etc.).
Seems to me it could be very useful to have.
Has anyone run across anything like this?
Many thanks!

Nevermind I found it. turns out I needed to add a "title" to that selectedCell

Similar Messages

How to keep track of what I've previously draw

They said:
Everytime the paint method is called, everything that was drawn before must be redrawn. The paint method has no way to keep track of what you've previously drawn, it is your responsibility as the programmer to keep track of such things.
Is this right?
How can keep track of my random shades of random amounts?
Is there a simple way to do that?
In a example, I must use getGraphics to get JPanel's graphics, then I use it to random draw something in the JPanel.
I just want to keep them in my JPanel when it resizes.I haven't get the answer yet.
Can you help me?

Ok I haven't got time to write the code for you, but here's the idea:
//User drags mouse around to draw on screen
//use mouseActionListener to catch MouseDragged event
int x = mouseEvent.getX();
int y = mouseEvent.getY();
Point p = new Point(x,y);
arrayListOfPoints.add(p);
// end mouse action capture
//override paint method of component
public void paint(Graphics g){
    super(g);
    Iterator it = arrayListOfPoints.iterator();
    while(it.hasNext()){
        Point p = (Point)it.next();
        g.drawLine(p.getX(),p.getY(),p.getX(),p.getY())

Has anyone ever dowloaded refog keylogger on their apple computer? Its a surveillance software to be able to keep track of what your kids are doing on their computer?

Has anyone ever dowloaded Refog Keylogger on their apple computer? Its a surveillance software to be able to keep track of what your kids are doing on their computer?

I Have downloaded a keylogger before

Keeping track of missing files

I recently moved into my college dorm, and to help me out musically I got a 300GB Western Digital MyBook to keep all my tunes on. Unfortunately, I've had a couple problems with it since I've been using it, mainly when I sync up my iPod. Random songs will often come up missing in my library, and I was hoping there might be a way to easily keep track of or hunt these down, similar to the Show Duplicates feature. If not, there really should be because there's nothing quite as frustrating (at least, in iTunes) as thinking a song's playable and available to transfer only to find out that it's actually missing, and I have to go find it in the directory where all the other songs that it knows exist already have been and will always be.

I think I may have solved this issue by copying my Library files into a folder containing the Music folder on my external, just like how the file tree is setup on the internal drive, and then holding option when opening iTunes. I'm not positive that's the best solution, but it might just work.

Keeping track of "moved files"

When importing pictures to the Aperture library, I usually do it by choosing to leave the files in their actual location. I understand that in so doing Aperture creates aliases of the files in its library. The location of my picture files varies; it can be on external drives or on the internal drive, depending on many factors.
But, whenever I change the location of a folder with pictures in it that I had imported to the Aperture library, Aperture looses track of the files. Is there a way to avoid this?
Thanks for helping.

Aperture does not use aliases to track the referenced masters. References exist in multiple text files, and probably in the database as well.
Examples of files that contain references (in your image's folder in the Aperture Library structure):
<filename>.apfile
<filename>.apmaster
You really should import files to where you want them or use the relocate masters function within Aperture.
chaos pilot

Opening files with selected applications.

This is the second time I post this subject. The first time, I thought I had solved the issue using a package named `Default Applications` [suggested in the discussion forum]. But this was `illusory`. If I tell the machine, in all the way I know, to open .f or .c (fortran/c) files with Aquamacs Emacs by default, it will do it a couple of times, but after a while, (a restart...I have not checked) Xcode wins again! I definitely don't want to use the Xcode editor. What should I do? Should I erase Xcode from the disk or eventually there is some more elegant solution to this problem? My impression is that this is a bug of the OS [the *always open with* button does not work at all], which should be cured in the new edition. I know from many collaborators and friends that they have exactly the same problem.

I had this problem before with how I view the inside of my main Hard Drive. I Keep on changing the view ( J in Finder) with bigger icons and a green background but after every restate its back to small unorganized icons with a white background. Two days ago I enabled finder to show hidden items. I Found out the .DS_Store was owned to another Admin on my computer. I changed it to mine and it's all swell.
So even though Repair permission did not work for me to fix the problem for me, I still recommend to Verify and Repair permissions.
Second I should suggest to find the file(s) that handles what files are opened with. (I'll do my part in finding it)
I hope this solves it.
Ti Powerbook G4 1.0 Ghz Mac OS X (10.4.10) 512 mb RAM

How do/can my iPod and iTunes keep track of what I've already heard?

Sorry, I bet this is repetitive -- but a search didn't point me to where I bet this is already answered...
I subscribe to lots of podcasts and want to avoid listening to, or even storing, stuff I've heard already. Please explain how an iPod/iTunes pairing can show, and maybe even auto-erase stuff that I've heard... is it possible? My iPod displays video podcasts shows "little blue dots" and I assume they mean "not viewed yet" -- but they don't appear on my SOUND podcasts... This is pretty useful! And I'd love to have my iTunes clobber stuff that I've heard/viewed already... Pointers to where this is discussed would be very welcome... TIA
AL-PowerBook G4 Mac OS X (10.4.6) 30GB iPod Video (5thGen)

Dan,
Your iPod should show the blue dots next to the podcasts that are yet to be played (mine does).
iTunes can be set to delete podcasts in a varity of ways. Go to Prefereances>Podcasts> where you can select how long you want iTunes to keep the podcast before it is deleted.
L
15" PowerBook G4 1Ghz 768mb RAM ‡ 17" iMac G5 1.8Ghz 1.5gb RAM Mac OS X (10.4.6) 300gb Maxtor External HDD ‡ 5th Gen. 60gb iPod  Dell XPS 600 2.8 Ghz 2gb RAM

Keeping track of what my daughter is doing on ipod

is there anyway i can see on my laptop what my daughter is doing on her ipod, web sites downloads etc

Although, I wish that was a thing...you can only restrict what apps and downloads your daughter can install. A monitoring software on an iPod is interesting but hasn't been made if you want something on a laptop then you can monitor her.

Java.util.logging: write to one log file from many application (classes)

I have a menuapp to launch many applications, all running in same JVM and i want to add logging information to them, using java.util.logging.
Intention is to redirect the logginginfo to a specific file within the menuapp. Then i want all logging from all applications written in same file. Finally, if needed (but i don't think it is), i will include code to write logging to specific file per app (class). The latter is probably not neccessary because there are tools to analyse the logging-files and allow to select filters on specific classes only.
The applications are in their own packages/jars and contain following logging-code:
        // Redirect error output
        try {
            myHandler = new FileHandler("myLogging.xml",1000000,2);
        } catch (IOException e) {
          System.out.println("Could not create file. Using the console handler");
        myLogger.addHandler(myHandler);
        myLogger.info("Our first logging message");
        myLogger.severe("Something terrible happened");
        ...When i launch the menuapplication, it writes info to "myLogging.xml.0"
but when i launch an application, the app writes info to "myLogging.xml.0.1"
I already tried to leave out the creation of a new Filehandler (try/catch block in code above) but it doesn't help.
Is it possible to write loginfo to same specific file?

You should open/close it somehow at every write from different processes.
But I personally prefer different file names to your forced merging, though.

Open Files in selected application

As with the files in "Finder" I click on them and they open in a particular application (default) or one of my choosing. Is there a way to transfer files to the iPad and them open them with the application of my choice?

It is just that I would like to have a system like "Finder" available so I could see all my various documents in one list.
This is not possible.
Because apps are sandboxed, which prevents data or files from being accessed by other apps. Helps to prevent data corruption and malware.
From the iOS Application Programming Guide
Security
An important job of iOS is to ensure the security of the user’s device and the applications running on it. To this end, iOS implements several features to protect the integrity of the user’s data and to ensure that applications do not interfere with one another or the system.
*The Application Sandbox*For security reasons, iOS restricts each application (including its preferences and data) to a unique location in the file system. This restriction is part of the security feature known as the application’s sandbox. The sandbox is a set of fine-grained controls limiting an application’s access to files, preferences, network resources, hardware, and so on. Each application has access to the contents of its own sandbox but cannot access other applications’ sandboxes."

CS5 keeping track of time spent with a project

I am not sure, if this would qualify as a feature request, or if there is a feture i have just not found yet.
Also i am not sure, if this is or is not a technical question.
Often i would like to know, how many hours i have already spent with one project. So is there any possibility in Premiere / and or After Effects, to see that sort of stats?
Maybe i should find the consistency to keep a book, a pen and a watch on my desk, but i find that hard at times...

Yeah, Bill that sounds interesting, a third party tool that keeps track, when a file (in this case pproj) is open / being used.
(so much for on topic...)
Rod:
Too bad, megaplayground has no homepage up (but who am i to judge, i am not a webdesigner, so it takes me quite a while to get my portfolio reworked and by the time it is finally finished, i don't like it anymore, then i start again and the dog bites it's own tail.)
I am sorry, but i'm not sure, what exactly you want to know from me there.
I suppose, you ask about stuff that interests you...
Are they working on AVID, FCP, Pr, Media100 ?
I am quite familiar with AVID in larger companies, have only very basic knowledge of FCP, learned the job on Media100, but that was a couple of years ago and i would say my experiences with Pr are somewhere in the middle.
So i don't feel like i could tell you any smart questions to ask...
Make sure to ask them, if they need someone for editing and Motion Graphics, i would love a trip to nyc for a few months
If you're just getting into this stuff, why don't you just enjoy the tour, chat up the hot girl at the front desk (don't know why, but they always seem to be singles) and check out the coffe?
and there are no dumb questions within or beyond the basics, dumb questions don't exist, the term "dumb question" is only used by people that are not willing or unable to help but at the same time want to make sure, they're seen as a smarter guy than the inquirer...
So happy that's something that is not happening inside this forum as far as i have experienced... there are others, and that's also why i am here.
(was all of that english? it's way past beer fourtyfive and i'm not a native speaker)
aaanyway, have a fun tour and if they run avid, ask them, why their unity writes much bigger files and needs huge raids in comparison to single workstation setups
i think, i am overdoing it a bit with the winking smileys, i hate them and am thinking of a splatter movie involving some guys with faces like these...
What was the OPs topic again? [no, i will not use this smileyfunction now! i am strong, i can resist this childish urge! they will not have my soul! damn.]

Glitches, clicks, and pops when exporting all tracks as audio files

It's getting to crunch time, and Logic 9 has been giving me a very hard time. It's now time to export my edited tracks as mono audio files to send to a mixing engineer. I thought mono files would be a button press away. Not so.
*Background on Project*:
– Started in Logic 8, and was continued in Logic 9
– Contains only audio that was recorded using Logic
– Has take folders with Quick Swipe Comps
– Has flexed regions
– Has take folders with flexed regions in them
– Has been manually beat mapped
Steps:
1) Set each fader, on every track, to unity gain and centre panning.
2) File > Export > All Tracks as Audio Files
3) Select AIFF, 24-bit, bypass effect plug-ins, and include volume/pan automation, normalize off.
*Expected Outcome*:
I expect mono/stereo files of all of my unprocessed tracks, bounced in place with fades, flexing, and quick swipe comps applied.
*Actual Outcome*:
I get mono/stereo files with clicks, pops, and scrambled sections scattered throughout the files, within fades, and at quick swipe comping boundaries. Retrying the export may result in clicks, pops, and scrambled sections in different places.
Workaround:
While the glitching in fades and at comp boundaries seems to happen in offline bounces, it rarely happens when playing the song in realtime. Unfortunately, there's no realtime option when you "export all tracks as audio files." *My workaround is to export the tracks one at a time by bouncing the project in realtime with the desired track soloed*.
This is excruciatingly slow. To speed things up, I've taken to soloing six tracks at a time, assigning all of them to the surround output, and panning each track exclusively to a different surround channel. This way, I can do a split file surround bounce and get six mono files, each with the contents of a different track. If your audio interface does not support 6 outputs, then you'll need to download SoundFlower and use their virtual 16 channel output.

In addition to the flex algorithms being disappointingly substandard in overall tc quality, flex tracks glitch constantly--especially if there are tempo changes or crossfades. You may be able to freeze them first and then export. AlternAtively, you could try tmelocking them and then using an alternate tempo map with a single tempo, then switching back after you flex tracks are bounced.

Can't import csv file to Address Book - "file you selected not valid" error

I'm trying to import a CSV file of names and addresses to Address Book but it keeps telling me "The file you selected does not appear to be a valid comma separated values (csv) file nor a valid tab delimited file."
Even using this simple test data saved in a txt file:
John,Doe,London
Jane,Doe,Dallas
Anyone know a reason why the file could be not valid?
Thanks, Mark

Your file needs to have the .csv extension on the end, so that Address Book knows how to interpret it.

I have an ipad and iphone with a pc laptop at home. I have a program called "Passkeepers on the laptop that keeps track of all my passwords. Can I tranasfer this file to my ipad or iphone. If yes, how if now what program for ipad or iphone do I need?

I have an ipad2 and an iphone 3. I also have a PC laptop. The lap top has a program to keep track of my passwords, "Passkeeper" Can I sync with my ipad or iphone? If yes how? If no what app will work on the ipad or phone to keep track of passwords?
Thanks

Oh nice, there's a PassKeeper application for the iPhone and iPad. Simply install it and it should talk you through steps, otherwise their website is probably a great place to check.
http://itunes.apple.com/us/app/passkeeper/id405021740?mt=8
I really like the application 1Password, and it works across all the products, Mac, PC, iPad, iPhone.

What file(s) keep Bridge labels and ratings

Using Bridge CS4 3.0.0.464, and have lost some of the labls and ratings I had given images. I was unable to regain them
from .xmp files, or cache files, so had to get them from backed up folders of those images, though all the image files themselves
were still fine. Would be nice to know as these help me keep track of things if I'd ever lose them again. Thank you.

Dear all,
I read this post and hope to clarify the design and ask some questions:
Issue 1:
How to access folder 'user/app data/Roaming/adobe/bridge' that Curt Y mentioned:
Please note on Windows 7 or Vista, the folder 'AppData' is hiden by default, you can either show hiden files, folders and drives out by changing the OS folder options, or you can directly input the path '[CurrentUser]/AppData/Roaming/Adobe/Bridge CS5/' to enter the folder directly.
Issue 2:
Where the Labels and Ratings are stored.
For all the XMP-supported files (e.g: include almost all the Camera Raw files, Images file, PDF, Illustrator files, InDesign files, video, audio, etc. An easy way in Bridge to know whether a file is XMP-supported file or not is to show out a property named 'Supports XMP' in metadata panel by checking on the item in Bridge Preferences -> Metadata -> File Properties -> Supports XMP), the Labels and Ratings are stored in the files themselves, or the file's sidecar file (for Camera Raw files, usually it is the .xmp file with same name of the raw file)
For all the XMP-unsupported files (e.g: folders, .txt, .doc, .xls, etc...), the Labels and Ratings are stored in the hiden file named .BridgeLabelsAndRatings which located in the same folder with the XMP-unsupported files you labeled/rated.
As I know, the file's labels and Ratings info won't be stored in the folder '[CurrentUser]/AppData/Roaming/Adobe/Bridge CS5/'.
Issue 3:
Labels and Ratings lost issue
If you copy/move files inside Bridge, either XMP-supported files or XMP-unsupported file shouldn't lost their label/rating info.
If you copy/move files outside Bridge, e.g, to copy or move them in Finder or Explorer:
- XMP-supported files: Camera Raw files which have sidercar file
   will lost label/rating info because Finder/Explorer don't know their sidecar file should be bandled with the camera raw files.
- XMP-supported files: other files which don't have sidercar file
   Shouldn't lost label/rating info because the metadata has been store in the files themselves.
- XMP-unsupported files.
   Will lost label/rating info because Finder/Explorer don't know the label/rating info is stored in the hidden file .BridgeLabelsAndRatings and won't copy/move the file together.
Questions:
Peterimmn mentioned the label/rating lost when he saved a file, .
- What application do you use to save the file?
- What kind of files are you saved?
- Are the files located on local disk?
Thanks,
Melissa
Bridge QE

Utility to keep track of what files a selected application accesses?

Similar Messages

Maybe you are looking for