Validate AD reconciliation data before it updates Resource

Environment: OIM 9.1.0.0
AD Connector: 9.1.1
Need to validate couple of attributes format and data, before OIM reconciliation engine processes it and updates resource.
Basically, for AD Trusted Recon can do it by Pre-Update and if validation fails can throw Error so update will not go through.
But for AD Target Recon unable to figure out the solution.

Tested, verified in OIM but confused:-
On Data Object Information: Users
Pre-Update: added new Entity adapter
On AD User Trusted recon event, logs shows it being triggered and executing
On Data Object Information: AD User Form
Pre-Update: added same Entity adapter
On AD User Target recon event, event executed and Linked but logs does not show it being triggered and executing
So tried to validate from WebConsole, Resource Form --> AD User , clicked on Edit and on Pop up clicked Save button.
log shows entity adapter being executed.
Does reconciliation engine update resource form under the hood without going through 'Data Object Information' ?

Similar Messages

How to verify that the user has changed table row data before db update

Hi all,
Iam using Oracle ADF with EJBs.
I have a single selection table that displays rows of data returned from a function of my data control.
The columns of my table are editable so that the user can change the data. The user selects a row, changes the data in one or more columns of the row and saves the data by means of a submit button. The code in the submit button, identifies the row of the corresponding iterator that the user clicked on and updates the data in the database (using the 'mergeEntity' function of the EntityManager)
Before saving the data, I want to put some logic to check whether the user has actually changed some data to avoid unnecessary updates in the database . But for this I need a technique to detect that the user has indeed changed some data in the table row.
One technique I have been using so far was to isolate the iterator row of the table and then query the corresponding row in the database table and compare their values.
Except from dummy, this technique is not efficient if the table contains many rows.
Moreover, in my case I have observed that on successive updates on the same row , the query on the database returns the new values (user changed values) and not the actual values contained in the database table. This means that when the user updates an iterator row the cached data affect also the results of the SELECT statement from the actual database table!!! Isn't this strange ?
Can somebody propose me a neat method to detect when the user has changed the the data of an iterator row ?

Hey Alan,
The below solution seems overly complicated to me and can not be implemented without a custom screen and/or the use of JavaScript. Also, if your main concern is that a user may accidentally loose all their data because they closed the browser window or the session times out before they hit the save button then this solution does not help you.
There are a couple of simpler approaches you can take here:
# If the use of JavaScript is permissible you can hook into the windows 'onUnload' event, and pop-up a message box which gives the user the opportunity to cancel closing the window and save their case if they haven't already.
# Implement an autosave feature by hooking into one of events provided by web determinations. A simple (but rather naive) way of doing this would be to hook into the OnRenderScreenEvent and call save on the interview session every time the event fires. This guarantees that all the data the user has submitted will aways automatically be saved, thereby removing the need to make sure the user manually saves their data before closing the browser.
Automatically making Web Determinations close a browser window has to be done using JavaScript. However, doing so means that a) it won't work for people who turn off JavaScript, which is commonly done for accessibility reasons b) you'll likely run afoul of the browser's security mechanism (they generally won't let you close a window that you didn't open and some really don't like you doing that at all).
Thanks,
Kristy

Backup Data before ICS update!

I know the ICS for Live with Walkman is just around the corner(in India) so I was thinking on how to completely backup app data not merely the apks but all app data for eg;- I dont want to loose my progress in some games .
So please help me backup my app data.
Solved!
Go to Solution.

There is an article which gives some advice on backup...
http://talk.sonymobile.com/message/154664#154664
It applies to Xperia phones but also includes Live with Walkman.
There is no built-in backup app on Gingerbread so it recommends apps like MyBackup.
I personally would back up all data from SD on to PC, this is because many apps store settings/scores etc... on the phone SD card.
And for the phone memory, where most apps are installed,you could use MyBackup.
The issue is that some of the apps you have now may not be compatible for ICS, therefore they may not work or may need updating. It would make sense to make a list of all the installed 3rd party apps and then just install ICS and start fresh.
Smartphones:
Xperia X10 mini pro, Xperia X8, Xperia Live with Walkman, Xperia L & Xperia SP

Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

fair enough. No need for any unnecessary posts either. You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
In any case, I hope that your problem was solved.

HT1657 2 rented movies disappeared before due date when I updated my ipad software

2 rented movies disappeared before due date when I updated my ipad softawre. Any way to get them back?

You will need to try contacting iTunes support and explain and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then probably Purchases, Billing & Redemption

Can SOA validate invoice data before the webservice sends a response?

I'm working with another branch of the company, and they're having trouble getting SOA to validate invoice data before it goes into Oracle financials. They claim that SOA can't validate the invoices according to our business rules, and can only validate the input data based on the schema defined in the webservice. Even the validation from the schema is useless because it produces schema violation rules that I can't return to a user.
After the webservice lets go of the data, there's a multi-step scheduled process where the data is handed off from scheduled process to scheduled process, so SOA can't guarantee in any way to the client end that invoices will get into the database. and worse, the data could get "stuck" at any one of these stages far after a user has submitted it.
Is any of this true? Is there no programming language within SOA that can perform validation of the business rules, and insert the data into Oracle all on it's own? I've little or no familiarity with Oracle, but it's kind of incredible to believe that this is how Oracle designed the major interface to interact with 3rd party applications.

People insist on using HTTP because it is the easiest to get through forward proxies, reverse proxies, and firewalls.
If you don't have to deal with those devices, then there are other protocol options.
As far as the amount of data, that is what my customers want to upload...
I suppose I could break it down into multiple requests, use compression etc.
I could also have the server reset the connection on a fatal error like this. (one which occurs within the POST body)
That would eliminate the keep-alive also since I do not want to waste another 10 minutes to resync the messages.
Regards,
Tim

Updating iPhone went wrong. Is it possible to remove data before restoring when in recovery mode?

My mum was updating her iPhone and she either unpluged the phone to soon or there was a problem with the update. Now the phone will not turn off and the screan is telling me to plug the phone back to iTunes. When I do so there is a pop up telling me i have to restore the phone and will lose all the data on the phone. If any one can help me save this data before I restore the phone i would be very greatful.

When the phone demands a recovery, you'll have to do that. Try to connect in recovery mode, with a little luck the phone will be able to backup before restoring, in case the firmware is not completely damaged.
Recovery mode is explained here: iPhone and iPod touch: Unable to restore

User exit, badi or enhancement to validate data before saving for qm02

Hi,
Currently, I have a requirement to validate the data of a notification before saving data in Tcode qm02.
I have found an user exit to check data for tcode qm02. It works for task tab, I mean I can get the data under task tab of qm02 and do the validation. However, for the tab processing: I want to validate the partner name before saving but I can not get the list of partners which is in Processing tab.
Please let me know if you could show me the user exit, enhancement, or Badi so that I can validate the data under processing tab in qm02.
Thanks in advance,
Hung To

Hi Keshav.T,
Currently I am using this exit to validate data for the tab "Task". However, for the tab "Processing" I can not get the data, let say Partner, to validate.
Thanks,
Hung To

HT1386 how to backup my apps and data before update to iOS5

how to backup my apps and data before update to iOS5

When you update, iTunes will backup your iOS device. You can also do it manually... http://support.apple.com/kb/ht1766

Ensure List/Menu populate my update form with the correct data before update

Hello,
Please how do I ensure my update form is populated with the correct data before update?
On my update page I have text fields and select fields (dynamic list/menu). When I open my profile page to make updates, I see the field well positioned in the text fields but in the select list/menu fields, I see "Select from list" instead of the value that was initiated selected
Correct Values before update
Wrong values during update
As you can see from the images below, when I open the update page, the list automatically populate the select fields with the last values in the list instead of the Initial values that where selected by the user before the update.
Can anyone please review and let me know where I have gone wrong.
Thank you
Mike

Hello All,
Once more thank you. I have sorted the issue out.
I observed that I was selecting the wrong field. I selected the field matching the record set of the select instead of the field matching the record set of the table I am working as seen on the image belew
I was selecting this - This is the record set of the table that hold values for the city select list
Instead of this. This is the record set of the table behind the form I am working on
My issue is now re-solved.
Mike

Since the latest update I cannot send photos Actual size or large. Medium size is as large as they go. I select Large and Actual, but to no avail. I was always able to do this before the update. I photo and I am up to date on everything. Any ideas?.

Since the latest update I cannot send photos Actual size or large. Medium size is as large as they go. I select Large and Actual, but to no avail. I was always able to do this before the update. iphoto 9. and I am up to date on everything. Any ideas?.

Are you also setting the file size in the New Message Window in Mail?

HT4972 I am unable to download apps because my iOs is not up to date. No update shows up in my General settings, how do I update my iPad?

I am unable to download apps because my iOs is not up to date. No update shows up in my General settings, how do I update my iPad?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you are updating using wifi, locate your iPad close to your router so you don't get a wifi dropout (can cause update corruption).
 Cheers, Tom

I have several very important school related documents on my iPad in the Pages app. Ever since i updated to iOS5, i can no longer open any documents in Pages that I made before I updated. Please help

I have several very important school related documents on my iPad in the Pages app. Ever since i updated to iOS5, i can no longer open any documents in Pages that I made before I updated. Please help

Without the iPad connected, open up iTunes on your computer. Go to iTunes/Preferences/Devices and delete the backups that you're absolutely certain do not have the documents. Refer to figure below.
iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "NO" to creating a backup. (You don't want to create a new backup that does not have the docs.) You will then be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad. This time, say "yes."
Repeat all of the above as required until you get the docs.

Use of "with master data & with out master data" at DTP update level

Hello experts,
In DTP, I check "with out master data". When I try to send corresponding transactional data, It is showing SID related error. Can anybody suggest what is the use of "with master data & with out master data" at DTP level.
Thanks in advance,
Zakir.

HI
HI in DTP level If you set this indicator, the system terminates the update of the request if no values are available for a data record.
Load the relevant master data before you load the transaction data.
If you set this indicator, the system terminates activation if master data is missing and produces an error message.
If you do not set this indicator, the system generates any missing SID values during activation.
In DataStore maintenance, if you do not set the SIDs Generation upon Activation indicator, the No Update without Master Data indicator in the DTP has no effect.
thx
vijju

Soap error in update resources at kmpropertymassmaintenance.xls

I have downloaded from sdn the KM Property Maintenance Excel from Martin Hermes created on 15/5/2006
I can read properties template and read resources but when I try to update resources I get an error:
Soap Error: Deserializing fails, Nested message: XML Deserialization Error. Reference [id1] in element [Resource] cannot be resolved. Incorrect usage of reference found, chack XML for correctness..

Hi,
ok...
But I have deplayed the ear file into my NW70 SP20 portal.
Change the URL in the Excel coding.
Read the KM documents information and after this my documents metadata.
Change the meta data values and store it again.
Every thing works fine.
Please decrible the way how you have use the Excel.
Thanks and best regards
Frank

Validate AD reconciliation data before it updates Resource

Similar Messages

Maybe you are looking for