ValidatePaymentGroupPreConfirmation in atg 9.1
I was just looking through our code and found validatePaymentGroupPreConfirmation pipeline chain used in the commercepipeline.xml file. We use ATG9.1 with patch2. When I check back the commerce programming guide, I could not able to find information regarding validatePaymentGroupPreConfirmation pipeline chain. But I can see that it is defined in ATG10.0 documentation.
Can somebody please, explain me, what triggers a call to validatePaymentGroupPreConfirmation pipeline in ATG9.1 ?
Thanks,
Prakash.
Edited by: PrakashAlluri on Jul 13, 2011 11:28 AM
This process is part of the moveToConfirmation pipeline chain and is triggered by the paymentGroupFormHandler during the validation of the payment groups.
This process will in turn invoke the validatePaymentGroupPreConfirmation pipeline chain.
The two components ValidatePaymentGroupsPreConfirmation ValidatePaymentGroupsForCheckout use the same class but with different pipeline chain.
ValidatePaymentGroupsPreConfirmation uses validatePaymentGroupPreConfirmation pipeline chain &
ValidatePaymentGroupsForCheckout uses validatePaymentGroup pipeline chain.
Similar Messages
-
Issue in bringing up CRS on ATG 10.1.1 with MySQL and Weblogic 10.3
Hello,
I am trying to bring up Commerce Reference Store as part of my evaluation using MySQL (bundled with ATG) and WebLogic 10.3.
I followed the ATG Documentation on CRS with WebLogic and MySQL and I could not proceed because of the below error log. I keep getting error in OnlineCreateServerInstanceTask of CIM. I believe it should be some configuration problem, but could not think of any.
As part of the installation, I use C:\jdk1.6.0_25. I verified my weblogic server is up through the admin console. I started MySQL before running the eval batch. Apart from starting MySQL server, I did not make any datasource/database configuration changes for ATG. I have not run any other scripts to configure MySQL too.
Please guide me to resolve the problem.
C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval>configureEval.bat
Do you wish to run the CRS evaluation installation? [Y/N]: y
Do you wish to use an existing database for the CRS evaluation? [Y/N]: n
The CRS evaluation install will attempt to create the database. Press [Return] t
o continue or any other key to quit:
Enter mysql database connection details
Enter user name: admin
Enter user password: admin
Enter database name: crsprod
Enter 'root' user password:
Creating database...
Finished database creation
Enter weblogic admin server URL: http://localhost:7001
Enter weblogic admin server username: weblogic
Enter weblogic admin server password: weblogic123
Buildfile: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\evalbuild.xml
all:
[copy] Copying 1 file to C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval
[delete] Deleting: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\cimOut.
cim.tmp
BUILD SUCCESSFUL
Total time: 0 seconds
Application Server: weblogic
The following installed ATG components are being used to launch:
ATGPlatform version 10.1.1 installed at C:\ATG\ATG10.1.1
Created "C:\ATG\ATG10.1.1\home\CIM\startDynamo.jar" in 15,273ms.
Nucleus running
atg.cim.productconfig.productselector.ProductSelectionContextTask starting...
(Searching for products... done.)
atg.cim.productconfig.productselector.ProductSelectionContextTask finished.
atg.cim.productconfig.appserver.AppServerSelectTask starting...
atg.cim.productconfig.appserver.AppServerSelectTask finished.
atg.cim.productconfig.appserver.AppServerPathTask starting...
atg.cim.productconfig.appserver.AppServerPathTask finished.
atg.cim.productconfig.appserver.DomainPathTask starting...
atg.cim.productconfig.appserver.DomainPathTask finished.
atg.cim.productconfig.appserver.UrlTask starting...
atg.cim.productconfig.appserver.UrlTask finished.
atg.cim.productconfig.appserver.UsernameTask starting...
atg.cim.productconfig.appserver.UsernameTask finished.
atg.cim.productconfig.appserver.PasswordTask starting...
atg.cim.productconfig.appserver.PasswordTask finished.
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask starting...
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask finished.
atg.cim.database.CreateSchemaTask starting...
atg.cim.database.CreateSchemaTask finished.
atg.cim.database.ImportDataTask starting...
Combining template tasks...Success
Importing (1 of 1) /CIM/tmp/import/nonswitchingCore-import1.xml:
/CommerceReferenceStore/Store/Storefront/data/pricelists.xml to /atg/commerce/pr
icing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/stores.xml to /atg/store/stores/St
oreRepository
/CommerceReferenceStore/Store/Storefront/data/catalog-i18n.xml to /atg/commerce/
catalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/pricelists-i18n.xml to /atg/commer
ce/pricing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/sites.xml to /atg/multisite/SiteRe
pository
/CommerceReferenceStore/Store/Storefront/data/sites-i18n.xml to /atg/multisite/S
iteRepository
/CommerceReferenceStore/Store/Storefront/data/promos-i18n.xml to /atg/commerce/c
atalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/seotags-i18n.xml to /atg/seo/SEORe
pository
/CommerceReferenceStore/Store/Storefront/data/wishlists.xml to /atg/commerce/gif
ts/Giftlists
/CommerceReferenceStore/Store/Storefront/data/inventory.xml to /atg/commerce/inv
entory/InventoryRepository
/CommerceReferenceStore/Store/Storefront/data/users.xml to /atg/userprofiling/Pr
ofileAdapterRepository
/CommerceReferenceStore/Store/Storefront/data/orders.xml to /atg/commerce/order/
OrderRepository
/CommerceReferenceStore/Store/Storefront/data/orders-i18n.xml to /atg/commerce/o
rder/OrderRepository
/CommerceReferenceStore/Store/Storefront/data/storetext-i18n.xml to /atg/store/s
tores/StoreRepository
/CommerceReferenceStore/Store/Storefront/data/claimable-i18n.xml to /atg/commerc
e/claimable/ClaimableRepository
... > Success
All Imports Completed Successfully
atg.cim.database.ImportDataTask finished.
atg.cim.worker.common.PropertyFileClearPersistanceTask starting...
atg.cim.worker.common.PropertyFileClearPersistanceTask finished.
atg.cim.productconfig.serverinstance.ServerInstanceNameTask starting...
atg.cim.productconfig.serverinstance.ServerInstanceNameTask finished.
atg.cim.productconfig.serverinstance.PortBindingsSelectTask starting...
atg.cim.productconfig.serverinstance.PortBindingsSelectTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask starting.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask finished.
atg.cim.productconfig.appassembly.EarFileNameTask starting...
atg.cim.productconfig.appassembly.EarFileNameTask finished.
atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask starting...
Error Executing Batch File
atg.cim.worker.TaskException: Error deploying to weblogic
atg.cim.worker.TaskException: Error exececuting batch file
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
130)
at atg.cim.Launcher.startCimFlow(Launcher.java:278)
at atg.cim.Launcher.main(Launcher.java:99)
Caused by: atg.cim.worker.TaskException: Error deploying to weblogic
at atg.cim.worker.Task.handleException(Task.java:72)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:159)
at atg.cim.headless.HeadlessExecutorImpl.executeTasks(HeadlessExecutorIm
pl.java:150)
at atg.cim.headless.HeadlessExecutorImpl.populateAndExecuteHeadlessTasks
(HeadlessExecutorImpl.java:140)
at atg.cim.batch.BatchChooserExecutor.populateAndExecuteHeadlessTasks(Ba
tchChooserExecutor.java:169)
at atg.cim.flow.CimFlow.headlessFlow(CimFlow.java:116)
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
120)
... 2 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:348: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following error occur
red while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at atg.cim.task.ant.utility.AntExecutionWrapper.executeAntTarget(AntExec
utionWrapper.java:167)
at atg.cim.worker.AntTask.executeAntTarget(AntTask.java:115)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:155)
... 7 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 20 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned:
1
at org.apache.tools.ant.taskdefs.ExecTask.runExecute(ExecTask.java:636)
at org.apache.tools.ant.taskdefs.ExecTask.runExec(ExecTask.java:662)
at org.apache.tools.ant.taskdefs.ExecTask.execute(ExecTask.java:487)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 34 more
Nucleus shutting down
Nucleus shutdown complete
Thanks.This error is resolved after following the logs in C:\ATG\ATG10.1.1\CIM\log\cim.log. The root cause is I used http as protocol instead of t3 while specifying weblogic admin url.
http://localhost:7001 instead of t3://localhost:7001
Thanks. -
Error in running baseline update from ATG
Hi,
I am trying to import the content in my ATG app schemas as indexed records into Endeca.
After making the configuration changes listed in the ATG-endeca integration guide , When I try to do baseline index from http://localhost:7003/dyn/admin/nucleus/atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin/ , following is what I get :
PreIndexing (Duration: 0:00:00)
/atg/endeca/index/commerce/CategoryTreeService COMPLETE (Succeeded)
RepositoryExport (Duration: 0:00:19)
/atg/endeca/index/commerce/SchemaExporter 58 0 COMPLETE (Succeeded)
/atg/endeca/index/commerce/CategoryToDimensionOutputConfig 9 0 COMPLETE (Succeeded)
/atg/endeca/index/commerce/RepositoryTypeDimensionExporter 15 0 COMPLETE (Succeeded)
/atg/commerce/search/ProductCatalogOutputConfig 31 0 COMPLETE (Succeeded)
EndecaIndexing (Duration: 0:02:18)
/atg/endeca/index/commerce/EndecaScriptService COMPLETE (Failed)
following is what I get in logs :
**** info Wed Dec 19 15:09:19 IST 2012 1355909959144 /atg/endeca/index/commerce/EndecaScriptService Starting script BaselineUpdate in application ATGen
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin --- atg.repository.search.indexing.IndexingException: Starting scrip
t BaselineUpdate of application ATGen failed
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:276)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by :java.net.ConnectException: Connection refused: connect
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.j
ava:154)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.strategies.InvocationStrategy.visit(Invocatio
nStrategy.java:32)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2767)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2443)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:1812)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at com.endeca.eac.client.ScriptControlPortSOAPBindingStub.startS
cript(ScriptControlPortSOAPBindingStub.java:263)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:272)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by (#2):java.net.ConnectException: Connection refused: connect
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.socketConnect(Native Method)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.jav
a:213)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.net.Socket.connect(Socket.java:529)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at java.lang.reflect.Method.invoke(Method.java:597)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.components.net.DefaultSocketFactory.create(De
faultSocketFactory.java:153)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.components.net.DefaultSocketFactory.create(De
faultSocketFactory.java:120)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSende
r.java:191)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPS
ender.java:404)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.j
ava:138)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.strategies.InvocationStrategy.visit(Invocatio
nStrategy.java:32)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2767)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2443)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:2366)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at org.apache.axis.client.Call.invoke(Call.java:1812)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at com.endeca.eac.client.ScriptControlPortSOAPBindingStub.startS
cript(ScriptControlPortSOAPBindingStub.java:263)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.startScript(ScriptRunner.ja
va:272)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:307)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Wed Dec 19 15:09:20 IST 2012 1355909960330 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin
P.S. - ALL the endeca services are running.
To add to surprise after this , I am unable to perform the baseline update from Endeca also. I get following error while running baseline update on endeca side :
[12.19.12 15:49:23] INFO: [ITLHost] Starting shell utility 'emgr_update_set_post_forge_dims'.
[12.19.12 15:49:32] SEVERE: Utility 'emgr_update_set_post_forge_dims' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
Occurred while executing line 34 of valid BeanShell script:
31| // Upload the generated dimension values to Workbench
32| WorkbenchManager.cleanDirs();
33| Forge.getPostForgeDimensions();
34| WorkbenchManager.updateWsDimensions();
35|
36| // Upload the generated config to Workbench
37| WorkbenchManager.updateWsConfig();
[12.19.12 15:49:32] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'emgr_update_set_post_forge_dims' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
[12.19.12 15:49:32] INFO: Released lock 'update_lock'.
The above error persists even if I remove the application using --remove-app command and re-deploy new app with same name as previous one
Any help/pointer would really be appreciated.
Thanks,
Mayank BatraThanks Pankaj and Patrick.
My endeca installation works absolutely fine.
When i install endeca with platform services,mdex and tools and framework , I can create the application,initialize, load baseline and baseline update my application beautifully, until I do the baseline index from ATG side.
Once I do that , I am unable to perform indexing from Endeca also.
What I need to do is reinstall the endeca(platform services for least) to resolve this - I have been doing this for quite some time now :(
My Endeca Workbench instance is up, running and reachable on port 8006.
The PlatformServices\workspace\logs\shell\ATGen.emgr_update_set_post_forge_dims.log has following one liner :
ERROR: Could not open acquire_lock.status.
I tried running the baseline index from ATG again and following is what I get in logs this time around :
**** info Mon Dec 24 12:57:32 IST 2012 1356334052168 /atg/endeca/index/commerce/EndecaScriptService Starting script BaselineUpdate in application ATGen
**** info Mon Dec 24 13:05:03 IST 2012 1356334503729 /atg/endeca/index/commerce/EndecaScriptService Script BaselineUpdate for application ATGen finished with status Failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin --- atg.repository.search.indexing.IndexingException: Script Baselin
eUpdate for application ATGen failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.waitForScript(ScriptRunner.
java:381)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:319)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin Caused by :atg.repository.search.indexing.IndexingException: Script Base
lineUpdate of application ATGen failed
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptRunner.waitForScript(ScriptRunner.
java:378)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.runUpdateScript(ScriptIn
dexable.java:319)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.eacclient.ScriptIndexable.performBaselineUpdate(Sc
riptIndexable.java:246)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.doTask(IndexingTask.java:
401)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingTask.performTask(IndexingTask.
java:359)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.endeca.index.admin.IndexingPhase$IndexingTaskJob.invoke(I
ndexingPhase.java:469)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin at atg.common.util.ThreadDispatcherThread.run(ThreadDispatcherTh
read.java:178)
**** Error Mon Dec 24 13:05:03 IST 2012 1356334503843 /atg/endeca/index/commerce/ProductCatalogSimpleIndexingAdmin
Regards,
Mayank Batra
Edited by: Waste Ideas on Dec 23, 2012 11:37 PM
Edited by: Waste Ideas on Dec 23, 2012 11:38 PM -
ATG 9.4 installation problem with weblogic 10.0.2 MP2
Hi,
I am new in ATG platform and framework.
I am trying to install ATG 9.4 on BEA Weblogic 10.0.2 on Windows desktop with the help of Installation guide for ATG.
I have completed installation of BEA Weblogic 10.0.2 and then ATG 9.4, giving the correct paths as mentioned by installation guide.
After that I am trying to configure datasource and database with the help of CIM.
But it is throwing error as
The system cannot find the path specified.
Press any key to continue.......
I think I am missing any configuration step or any manual configuration.
Could some one please help me about next manual steps for configuration after the ATG installation is complete.
Could you please help me on this regards as I need to setup ATG platform on my system as soon as possible.
Many Thanks for help in advance.**The system cannot find the path specified.**
**Press any key to continue.....**
Correct me if wrong but it appears that you are encountering this as soon as you start cim.bat? Have you tried starting cim after setting DYNAMO_HOME as:
set DYNAMO_HOME=D:\ATG\ATG9.4\home
You can also try to temporarily comment out the first line in cim.bat by putting a "rem" before @echo off as: rem @echo off
This will print all the paths and commands on console that are being setup and used by cim.bat then see if you can find out something wrong from it. Later on you can undo your change in cim.bat. Check if you can find any more details about your error in the CIM logs present under ATG9.4\CIM\log. -
Hi,
We have a requirement to send out an email to the user when his session times out while on shopping cart page.
Is there a way in ATG to trap the session timeout event and write our logic when it occurs?
Please advise.If you want to email only on shopping cart page, then in the pipeline save the user timeout details only for the pages you are interested in ( like shopping cart page).
And also maintaining additional field requesturi is also good.
Session timeout can be found if max_interval_time-last_accessed_time>0 for a particular user.
So scheduler can check for the condition and send email to the user.
Peace
Shaik -
How to add a new property security question in atg profile?
Hi All,
I want to add a new field in registration.jsp named as Security Questions; it has 3 questions and it should be ordered and cannot contain duplicate values.
For this I have created
1) a customUserProfile.xml under /MyModule/config/atg/userprofiling/customUserProfile.xml with the following content-
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE gsa-template PUBLIC "-//Art Technology Group, Inc.//DTD General SQL Adapter//EN"
"http://www.atg.com/dtds/gsa/gsa_1.0.dtd">
<gsa-template>
<header>
<name>Registration</name>
<author></author>
</header>
<item-descriptor name="securityquestions">
<table name="security_questions" id-column-names="securequestions_id">
<property name="securityquestions" data-type="enumerated">
<attribute name="useCodeForValue" value="false"/>
<option value="what is your birth place" code="0"/>
<option value="what is your favourite colour" code="1"/>
<option value="what is your pet name" code="2"/>
</property>
</table>
</item-descriptor>
2) a definition file under named as /MyModule/config/atg/userprofiling/customUserProfile.properties-
$class=atg.adapter.gsa.GSARepository
$scope=global
repositoryName=customUserProfile
# database access- for making repositry as versioned, use SwitchingDataSource else use JTDataSource
dataSource=/atg/dynamo/service/jdbc/SwitchingDataSource
transactionManager=/atg/dynamo/transaction/TransactionManager
# our XML definitionFile
definitionFiles=/atg/userprofiling/customUserProfile.xml
# XML parsing
XMLToolsFactory=/atg/dynamo/service/xml/XMLToolsFactory
# id generation
idGenerator=/atg/dynamo/service/IdGenerator
</gsa-template>
3) a droplet names as /MyModule/src/com/pa/SecurityQuestionLogin.java
4) a registration jsp with the following code snippet for security questions-
<dsp:droplet name="SecurityQuestionLogin">
<dsp:select bean="SecurityQuestionLogin.securityQuestions">
<dsp:droplet name="PossibleValues">
<dsp:param name="itemDescriptorName" value="securityquestions"/>
<dsp:param name="propertyName" value="type"/>
<dsp:oparam name="output">
<dsp:droplet name="ForEach">
<dsp:param name="array" param="values"/>
<dsp:oparam name="output">
<dsp:option param="element"/>
<dsp:valueof param="element"/>
</dsp:oparam>
</dsp:droplet>
But I don't know what logic can I implement in java class for this requirement.
Is the above structure is right for this purpose,please help!
Regards,
VikasHi Nitin,
extend ATG userProfile.xml and add properties there in user item-descriptor
I created userProfile.xml under C:\ATG\ATG10.0.3\MyModule\config\atg\userprofiling with following contents-
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE gsa-template
PUBLIC "-//Art Technology Group, Inc.//DTD General SQL Adapter//EN"
"http://www.atg.com/dtds/gsa/gsa_1.0.dtd">
<gsa-template>
<item-descriptor name="user" cache-mode="simple" xml-combine="append">
<table name="security_questions" type="auxiliary" id-column-name="securequestions_id">
<property name="securityquestions" column-name="securityquestions" data-type="enumerated">
<attribute name="useCodeForValue" value="false"/>
<option value="what is your birth place" code="0"/>
<option value="what is your favourite colour" code="1"/>
<option value="what is your pet name" code="2"/>
</property>
</table>
</item-descriptor>
</gsa-template>
and created userProfile.properties file with following content-
$class=atg.adapter.gsa.GSARepository
$scope=global
repositoryName=userProfile
# database access- for making repositry as versioned, use SwitchingDataSource else use JTDataSource
dataSource=/atg/dynamo/service/jdbc/SwitchingDataSource
transactionManager=/atg/dynamo/transaction/TransactionManager
# our XML definitionFile
definitionFiles=/atg/userprofiling/userProfile.xml
# XML parsing
XMLToolsFactory=/atg/dynamo/service/xml/XMLToolsFactory
# id generation
idGenerator=/atg/dynamo/service/IdGenerator
and change the jsp code as-
<dsp:select bean="/atg/userProfiling/Profile.securityQuestions">
<dsp:droplet name="PossibleValues">
<dsp:param name="itemDescriptorName" value="securityquestions"/>
<dsp:param name="propertyName" value="type"/>
<dsp:oparam name="output">
<dsp:droplet name="ForEach">
<dsp:param name="array" param="values"/>
<dsp:oparam name="output">
<dsp:option param="element"/>
<dsp:valueof param="element"/>
</dsp:oparam>
</dsp:droplet>
</dsp:oparam>
</dsp:droplet>
</dsp:select>
</dsp:droplet>
Have I done right?
And what else I need to do,should I run the startsqlrepository script to create the table structure for this property?
Thanks & Regards,
Vikas -
How can I use Drupal as a third party CMS with ATG E-Commerce Application?
Hi Friends,
We are planning to use a third party Freeware Content Management System (CMS) for web site content in ATG E-Commerce Application, instead of ATG content Administration or merchandising.
Can anybody please let me know how can I use a third party CMS(Eg: Drupal) with ATG E-Commerce Application?
Regards,
Krishna.I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041. It compares Today to the vacation elig. date and if they match, set a time type indicator to 1. I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours. Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage. In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.
-
Not able to create a new tab in atg csc 10.0.3
am trying to create a new tab in csc 10.0.3 in ACC.
i created a custom tab by duplicating an existign tab and renaming the id and all. bt its not reflecting.
i had added the newl;y created tab id in componentId of Framework.
i tried to delete existing tab its working.
please help me out.Check this out:
Immuraliraj-TechTalks: ATG CSC : Adding a New Tab to Commerce Servie Center -
Specific Hardware Configuration for a new ATG Project
Hi All,
We're going to setup a new ATG Project in my organisation with ATG 10.
Can you please suggest me the best Hardware configuration to setup new project?
Thanks & Regards,
Narasimha Rao D.Hi,
I am not able to figure out which version is jboss-eap-5.1\jbosss.
Can you please let me know which version of JBoss to download mentioned in this link http://www.jboss.org/jbossas/downloads/
for ATG versions mentioned below
1)9.3 which version of jboss to use ???
2)10.0.2 which version of jboss to use ??? -
Error while running forge post Endeca integration with ATG
Hi All,
We have integrated Endeca application with ATG and then tried running the Endeca baseline update script. However the script failed with the below error message
Parsing XML dimensions data with validation turned on
Parsing project file "C:\apps\ATGSample\data\forge_output\ATGSample.xml" (project="ATGSample")
XMLParser: Reading dimensions, dvals, and synonyms from file "C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml"
ERROR 06/07/13 05:15:57.022 UTC (1370582157018) DGIDX {dgidx,baseline} Internal error while decompressing input stream: null
FATAL 06/07/13 05:15:57.022 UTC (1370582157018) DGIDX {dgidx,baseline} Fatal error at file , line 0, char 0; Message: An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml
WARN 06/07/13 05:15:57.022 UTC (1370582157019) DGIDX {dgidx,baseline} Lexer/OLT log: level=-1: 2013/06/07 10:45:57 | INFO | Disabling log callback
We checked the physical location of forge output and found that there is no file called 'ATGSample.dimensions.xml '
However, when we manually placed this file in the forge output folder and ran dgidx alone, the baseline update failed with the below error
Parsing XML dimensions data with validation turned on
Parsing project file "C:\apps\ATGSample\data\forge_output\ATGSample.xml" (project="ATGSample")
XMLParser: Reading dimensions, dvals, and synonyms from file "C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml"
ERROR 06/07/13 05:15:57.022 UTC (1370582157018) DGIDX {dgidx,baseline} Internal error while decompressing input stream: null
FATAL 06/07/13 05:15:57.022 UTC (1370582157018) DGIDX {dgidx,baseline} Fatal error at file , line 0, char 0; Message: An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml
WARN 06/07/13 05:15:57.022 UTC (1370582157019) DGIDX {dgidx,baseline} Lexer/OLT log: level=-1: 2013/06/07 10:45:57 | INFO | Disabling log callback
============================================================================
=== DGIDX: Version = "6.4.0.692722"
=== Start Time : Fri Jun 07 11:04:15 2013
=== Arguments : "C:\Endeca\MDEX\6.4.0\bin\dgidx.exe -v --compoundDimSearch --lang en --out C:\apps\ATGSample\logs\dgidxs\Dgidx\Dgidx.log --dtddir C:\Endeca\MDEX\6.4.0\conf\dtd --tmpdir C:\apps\ATGSample\data\temp C:\apps\ATGSample\data\forge_output\ATGSample C:\apps\ATGSample\data\dgidx_output\ATGSample"
=== Current Directory : C:\apps\ATGSample
=== Exec Path : C:\Endeca\MDEX\6.4.0\bin\dgidx.exe
============================================================================
Language/collation in use is English (collation=endeca)
WARN 06/07/13 05:34:15.054 UTC (1370583255046) DGIDX {dgidx,baseline} Lexer/OLT log: level=-1: 2013/06/07 11:04:15 | INFO | Enabling log callback
No application configuration specified. Using "C:\apps\ATGSample\data\forge_output\ATGSample" as the application configuration prefix.
============================================================================
=== DGIDX: Starting phase "Read raw dimensions, properties, and records"
=== Current Time : Fri Jun 07 11:04:15 2013
=== Total Elapsed : 0.1131 seconds
=== User CPU Time : 0.0625 seconds
=== System CPU Time : 0.1250 seconds
=== Memory Usage : 18.44 MB
============================================================================
Parsing XML dimensions data with validation turned on
Parsing project file "C:\apps\ATGSample\data\forge_output\ATGSample.xml" (project="ATGSample")
XMLParser: Reading dimensions, dvals, and synonyms from file "C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml"
In Dval [id=10001] named "clothing-sku.color", the name is non-searchable.
In Dval [id=10002] named "clothing-sku.size", the name is non-searchable.
In Dval [id=10003] named "furniture-sku.woodFinish", the name is non-searchable.
In Dval [id=10093] named "product.brand", the name is non-searchable.
In Dval [id=10094] named "product.catalogId", the name is non-searchable.
In Dval [id=10006] named "product.disallowAsRecommendation", the name is non-searchable.
In Dval [id=10007] named "product.features.displayName", the name is non-searchable.
In Dval [id=10095] named "product.language", the name is non-searchable.
In Dval [id=10008] named "product.nonreturnable", the name is non-searchable.
In Dval [id=10096] named "product.priceListPair", the name is non-searchable.
In Dval [id=10009] named "product.siteId", the name is non-searchable.
In Dval [id=10010] named "sku.siteId", the name is non-searchable.
In Dval [id=10011] named "product.category", the name is non-searchable.
In Dval [id=10079] named "item.type", the name is non-searchable.
XMLParser: Done reading dimensions, dvals, and synonyms from "C:\apps\ATGSample\data\forge_output\\ATGSample.dimensions.xml"
XMLParser: Reading auto propmap file "C:\apps\ATGSample\data\forge_output\\ATGSample.auto_propmap.xml"
XMLParser: Done reading auto propmap file "C:\apps\ATGSample\data\forge_output\\ATGSample.auto_propmap.xml"
XMLParser: Reading properties from file "C:\apps\ATGSample\data\forge_output\ATGSample.prop_refs.xml"
XMLParser: Done reading properties from file "C:\apps\ATGSample\data\forge_output\ATGSample.prop_refs.xml"
XMLParser: Reading rollup properties and dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.rollups.xml"
XMLParser: Done reading rollup properties and dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.rollups.xml"
XMLParser: Reading record spec property from file "C:\apps\ATGSample\data\forge_output\ATGSample.record_spec.xml"
XMLParser: Property "common.id" is a record spec property.
XMLParser: Done reading record specs from "C:\apps\ATGSample\data\forge_output\ATGSample.record_spec.xml"
XMLParser: Reading record filter properties from file "C:\apps\ATGSample\data\forge_output\ATGSample.record_filter.xml"
XMLParser: Done reading record filter properties from file "C:\apps\ATGSample\data\forge_output\ATGSample.record_filter.xml"
XMLParser: Creating dimensions from dvals.
XMLParser: Reading rollup properties and dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.rollups.xml"
XMLParser: Done reading rollup properties and dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.rollups.xml"
XMLParser: Reading dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimension_refs.xml"
XMLParser: Done reading dimensions from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimension_refs.xml"
XMLParser: Reading dimension groups from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimension_groups.xml"
XMLParser: Done reading dimension groups from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimension_groups.xml"
XMLParser: Reading precedence rules from file "C:\apps\ATGSample\data\forge_output\ATGSample.precedence_rules.xml"
XMLParser: Done reading precedence rules from file "C:\apps\ATGSample\data\forge_output\ATGSample.precedence_rules.xml"
XMLParser: Reading dval refs from file "C:\apps\ATGSample\data\forge_output\ATGSample.dval_refs.xml"
XMLParser: Done reading dval refs from file "C:\apps\ATGSample\data\forge_output\ATGSample.dval_refs.xml"
XMLParser: Reading dval ranks from file "C:\apps\ATGSample\data\forge_output\ATGSample.dval_ranks.xml"
XMLParser: Done reading dval ranks from file "C:\apps\ATGSample\data\forge_output\ATGSample.dval_ranks.xml"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10079] "item.type"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10094] "product.catalogId"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10095] "product.language"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10009] "product.siteId"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10001] "clothing-sku.color"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10007] "product.features.displayName"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10006] "product.disallowAsRecommendation"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10002] "clothing-sku.size"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10003] "furniture-sku.woodFinish"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10008] "product.nonreturnable"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10093] "product.brand"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10096] "product.priceListPair"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10010] "sku.siteId"
ERROR 06/07/13 05:34:15.242 UTC (1370583255242) DGIDX {dgidx,baseline} No dimension_refs entry found for dimension [10011] "product.category"
XMLParser: Reading refinement config from file "C:\apps\ATGSample\data\forge_output\ATGSample.refinement_config.xml"
XMLParser: Done reading refinement config from file "C:\apps\ATGSample\data\forge_output\ATGSample.refinement_config.xml"
XMLParser: Reading dimension search index configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimsearch_index.xml"
XMLParser: Done reading dimension search index configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.dimsearch_index.xml"
XMLParser: Reading record search index configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_indexes.xml"
XMLParser: Done reading record search index configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_indexes.xml"
XMLParser: Reading record search interface configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_config.xml"
XMLParser: Done reading record search interface configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_config.xml"
WARN 06/07/13 05:34:15.288 UTC (1370583255283) DGIDX {dgidx,baseline} Errors while parsing record search interface configuration from file "C:\apps\ATGSample\data\forge_output\ATGSample.recsearch_config.xml": RETURN_RELRANK_SCORE no longer supported. Search interface member "allAncestors.displayName" in interface "All" is not a property or dimension Search interface member "product.displayName" in interface "All" is not a property or dimension Search interface member "sku.displayName" in interface "All" is not a property or dimension Cannot put search interface member "product.features.displayName" into the search interface "All" because it has not been enabled for full-text search Cannot put search interface member "product.brand" into the search interface "All" because it has not been enabled for full-text search Search interface member "product.repositoryId" in interface "All" is not a property or dimension Search interface member "sku.repositoryId" in interface "All" is not a property or dimension Search interface member "product.briefDescription" in interface "All" is not a property or dimension Search interface member "product.description" in interface "All" is not a property or dimension Search interface member "product.longDescription" in interface "All" is not a property or dimension Search interface member "product.keywords" in interface "All" is not a property or dimension Cannot put search interface member "clothing-sku.color" into the search interface "All" because it has not been enabled for full-text search Cannot put search interface member "clothing-sku.size" into the search interface "All" because it has not been enabled for full-text search Cannot put search interface member "furniture-sku.woodFinish" into the search interface "All" because it has not been enabled for full-text search Search interface member "sku.manufacturer_part_number" in interface "All" is not a property or dimension
XMLParser: Reading search chars from file "C:\apps\ATGSample\data\forge_output\ATGSample.search_chars.xml"
XMLParser: Done reading search chars from file "C:\apps\ATGSample\data\forge_output\ATGSample.search_chars.xml"
XMLParser: Reading language stemming settings from file "C:\apps\ATGSample\data\forge_output\ATGSample.stemming.xml"
XMLParser: Done reading per-language stemming settings from file "C:\apps\ATGSample\data\forge_output\ATGSample.stemming.xml"
Default language English manually configured to use static word forms.
XMLParser: Reading word forms from file "C:\Endeca\MDEX\6.4.0\conf\stemming\en_word_forms_collection.xml"
XMLParser: Done reading word forms from file "C:\Endeca\MDEX\6.4.0\conf\stemming\en_word_forms_collection.xml". There are 50374 word forms.
XMLParser: Reading language config from file "C:\apps\ATGSample\data\forge_output\ATGSample.languages.xml"
XMLParser: Done reading language config from file "C:\apps\ATGSample\data\forge_output\ATGSample.languages.xml"
XMLParser: Reading stop words from file "C:\apps\ATGSample\data\forge_output\ATGSample.stop_words.xml"
XMLParser: Done reading stop words from file "C:\apps\ATGSample\data\forge_output\ATGSample.stop_words.xml", finished in 0.0039 seconds.
FATAL 06/07/13 05:34:17.616 UTC (1370583257616) DGIDX {dgidx,baseline} ENE Indexer: Error processing records file.
WARN 06/07/13 05:34:17.616 UTC (1370583257616) DGIDX {dgidx,baseline} Lexer/OLT log: level=-1: 2013/06/07 11:04:17 | INFO | Disabling log callbackI've seen this type of error before when Forge is configured to read multiple files with spec *.xml. Is that how you've configured your record adapter? This configuration then collides with Forge XML config files merged into the same data/processing directory.
From memory there's a couple of solutions for this - one might be to give the files a common name prefix if that's feasible, e.g. _data*.xml. You could use a sub-directory to separate the files, but you'd need to modify your copy scripts. -
Error While running ATG ACI 9.2 OOTB Reports.
Hi All,
I am getting following error when I run some of the OOTB ACI 9.2 reports.
UDA-SQL-0107 A general exception has occurred during the operation "prepare".ORA-32035: unreferenced query name defined in WITH clause RSV-SRV-0042 Trace back:RSReportService.cpp(758): QFException: CCL_CAUGHT: RSReportService::process()RSReportServiceMethod.cpp(239): QFException: CCL_RETHROW: RSReportServiceMethod::process(): promptPagingForward_RequestRSASyncExecutionThread.cpp(774): QFException: RSASyncExecutionThread::checkExceptionRSASyncExecutionThread.cpp(211): QFException: CCL_CAUGHT: RSASyncExecutionThread::run(): promptPagingForward_RequestRSASyncExecutionThread.cpp(824): QFException: CCL_RETHROW: RSASyncExecutionThread::processCommand(): promptPagingForward_RequestExecution/RSRenderExecution.cpp(593): QFException: CCL_RETHROW: RSRenderExecution::executeAssembly/RSDocAssemblyDispatch.cpp(264): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSLayoutAssembly.cpp(64): QFException: CCL_RETHROW: RSLayoutAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(331): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchChildrenAssemblyForwardAssembly/RSReportPagesAssembly.cpp(163): QFException: CCL_RETHROW: RSReportPagesAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(281): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSPageAssembly.cpp(287): QFException: CCL_RETHROW: RSPageAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(281): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSTableRowAssembly.cpp(160): QFException: CCL_RETHROW: RSTableRowAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(281): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSTableCellAssembly.cpp(122): QFException: CCL_RETHROW: RSTableCellAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(331): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchChildrenAssemblyForwardAssembly/RSTableAssembly.cpp(97): QFException: CCL_RETHROW: RSTableAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(331): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchChildrenAssemblyForwardAssembly/RSTableRowAssembly.cpp(160): QFException: CCL_RETHROW: RSTableRowAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(281): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSTableCellAssembly.cpp(122): QFException: CCL_RETHROW: RSTableCellAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(331): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchChildrenAssemblyForwardAssembly/RSAssembly.cpp(626): QFException: CCL_RETHROW: RSAssembly::createListIteratorAssembly/RSAssembly.cpp(667): QFException: CCL_RETHROW: RSAssembly::createListIteratorRSQueryMgr.cpp(978): QFException: CCL_RETHROW: RSQueryMgr::getListIteratorRSQueryMgr.cpp(1051): QFException: CCL_RETHROW: RSQueryMgr::getResultSetIteratorRSQueryMgr.cpp(1211): QFException: CCL_RETHROW: RSQueryMgr::createIteratorRSQueryMgr.cpp(1511): QFException: CCL_RETHROW: RSQueryMgr::executeRsapiCommandRSQueryMgr.cpp(1498): QFException: CCL_RETHROW: RSQueryMgr::executeRsapiCommandRSQueryMgrExecutionHandlerImpl.cpp(174): QFException: CCL_RETHROW: RSQueryMgrExecutionHandlerImpl::execute()RSQueryMgrExecutionHandlerImpl.cpp(154): QFException: CCL_RETHROW: RSQueryMgrExecutionHandlerImpl::execute()RSQFSession.cpp(243): QFException: CCL_RETHROW: RSQFSession::DoRequestQFSSession.cpp(603): QFException: CCL_RETHROW: QFSSession::ProcessDoRequest()QFSSession.cpp(601): QFException: CCL_CAUGHT: QFSSession::ProcessDoRequest()QFSSession.cpp(558): QFException: CCL_RETHROW: QFSSession::ProcessDoRequest()QFSConnection.cpp(737): QFException: CCL_RETHROW: QFSConnection::ExecuteQFSQuery.cpp(199): QFException: CCL_RETHROW: QFSQuery::Execute v2CoordinationQFSQuery.cpp(4174): QFException: CCL_THROW: CoordinationPlanner
I changed "Use SQL With Clause" to "No" to resolve that. After changing that I got the following error when I run the same OOTB report.
RSV-SRV-0042 Trace back:RSReportService.cpp(758): QFException: CCL_CAUGHT: RSReportService::process()RSReportServiceMethod.cpp(239): QFException: CCL_RETHROW: RSReportServiceMethod::process(): promptPagingForward_RequestRSASyncExecutionThread.cpp(774): QFException: RSASyncExecutionThread::checkExceptionRSASyncExecutionThread.cpp(211): QFException: CCL_CAUGHT: RSASyncExecutionThread::run(): promptPagingForward_RequestRSASyncExecutionThread.cpp(824): QFException: CCL_RETHROW: RSASyncExecutionThread::processCommand(): promptPagingForward_RequestExecution/RSRenderExecution.cpp(593): QFException: CCL_RETHROW: RSRenderExecution::executeAssembly/RSDocAssemblyDispatch.cpp(264): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSLayoutAssembly.cpp(64): QFException: CCL_RETHROW: RSLayoutAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(331): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchChildrenAssemblyForwardAssembly/RSReportPagesAssembly.cpp(163): QFException: CCL_RETHROW: RSReportPagesAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(281): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSPageAssembly.cpp(287): QFException: CCL_RETHROW: RSPageAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(281): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSTableRowAssembly.cpp(160): QFException: CCL_RETHROW: RSTableRowAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(281): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSTableCellAssembly.cpp(122): QFException: CCL_RETHROW: RSTableCellAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(331): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchChildrenAssemblyForwardAssembly/RSTableAssembly.cpp(97): QFException: CCL_RETHROW: RSTableAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(331): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchChildrenAssemblyForwardAssembly/RSTableRowAssembly.cpp(160): QFException: CCL_RETHROW: RSTableRowAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(281): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchAssemblyAssembly/RSTableCellAssembly.cpp(122): QFException: CCL_RETHROW: RSTableCellAssembly::assembleAssembly/RSDocAssemblyDispatch.cpp(331): QFException: CCL_RETHROW: RSDocAssemblyDispatch::dispatchChildrenAssemblyForwardAssembly/RSAssembly.cpp(626): QFException: CCL_RETHROW: RSAssembly::createListIteratorAssembly/RSAssembly.cpp(667): QFException: CCL_RETHROW: RSAssembly::createListIteratorRSQueryMgr.cpp(978): QFException: CCL_RETHROW: RSQueryMgr::getListIteratorRSQueryMgr.cpp(1051): QFException: CCL_RETHROW: RSQueryMgr::getResultSetIteratorRSQueryMgr.cpp(1211): QFException: CCL_RETHROW: RSQueryMgr::createIteratorRSQueryMgr.cpp(1511): QFException: CCL_RETHROW: RSQueryMgr::executeRsapiCommandRSQueryMgr.cpp(1498): QFException: CCL_RETHROW: RSQueryMgr::executeRsapiCommandRSQueryMgrExecutionHandlerImpl.cpp(174): QFException: CCL_RETHROW: RSQueryMgrExecutionHandlerImpl::execute()RSQueryMgrExecutionHandlerImpl.cpp(154): QFException: CCL_RETHROW: RSQueryMgrExecutionHandlerImpl::execute()RSQFSession.cpp(243): QFException: CCL_RETHROW: RSQFSession::DoRequestQFSSession.cpp(603): QFException: CCL_RETHROW: QFSSession::ProcessDoRequest()QFSSession.cpp(601): QFException: CCL_CAUGHT: QFSSession::ProcessDoRequest()QFSSession.cpp(558): QFException: CCL_RETHROW: QFSSession::ProcessDoRequest()QFSConnection.cpp(737): QFException: CCL_RETHROW: QFSConnection::ExecuteQFSQuery.cpp(199): QFException: CCL_RETHROW: QFSQuery::Execute v2CoordinationQFSQuery.cpp(4174): QFException: CCL_THROW: CoordinationPlanner
I changed "Auto Group & Summarize" to No then this error is resolved, report is displaying but the data within the report is showing duplication of reocrds. It seems because of changes for "Auto Group & Summarize" the report is not displaying aggregation or group data.
I am using ATG 9.2, Oracle 10g , Oracle thin driver. Please help me to resolve these issues.
Advanced Thanks for any help.
Edited by: ram_atg_867614 on Jun 23, 2011 3:17 AM
Edited by: ram_atg_867614 on Jun 23, 2011 3:22 AMHi
I think you may be running into a known product issue here - ARF-168034.
You will need to contact the support team and log a support case.
There are fixes available for this issue.
Please send the full server log files containing both the errors you saw while opening the case.
Thanks
Gareth -
Getting Error while running ATGPublishing server instance in ATG 10.0.3
Hi All,
I installed and configured ATG 10.0.3 and running both production and Publishing server instances. I'm getting following error in 'Publishing' .
OS : Windows 7
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341603 / Unable to set configured property "/atg/userprofiling/search/ProfileOutputConfig.documentSubmitter" atg.nucleus.ConfigurationException: Unable to resolve component /atg/userprofiling/search/ProfileLiveDocumentSubmitter
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / Unable to resolve component /atg/userprofiling/search/ProfileOutputConfig java.lang.AbstractMethodError: atg.repository.search.config.impl.ItemImpl.getProperties()Latg/repository/search/config/PropertiesType;
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.repository.search.indexing.specifier.OutputItemSpecifier.verifyItem(OutputItemSpecifier.java:2272)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.repository.search.indexing.specifier.OutputItemSpecifier.setFromItemType(OutputItemSpecifier.java:748)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.repository.search.indexing.IndexingOutputConfig.doStartService(IndexingOutputConfig.java:2251)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.GenericRMIService.startService(GenericRMIService.java:538)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.NucleusNameResolver.startService(NucleusNameResolver.java:1704)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.NucleusNameResolver.configureAndStartService(NucleusNameResolver.java:1375)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:907)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:666)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.NucleusNameResolver.createFromName(NucleusNameResolver.java:647)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:492)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.NucleusNameResolver.resolveName(NucleusNameResolver.java:1216)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.ConfigurationRefArray.getValue(ConfigurationRefArray.java:168)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.SimpleComponentState.setBeanProperty(SimpleComponentState.java:401)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.SimpleConfigurationState.saveToBean(SimpleConfigurationState.java:240)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.SimpleConfigurationState.configureBean(SimpleConfigurationState.java:263)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.BeanConfigurator.configureBean(BeanConfigurator.java:297)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.PropertyConfiguration.configureService(PropertyConfiguration.java:978)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341615 / at atg.nucleus.SingleNucleusConfigurator.configureService(SingleNucleusConfigurator.java:84)
**** Error Fri Mar 15 10:42:21 IST 2013 1363324341654 / Unable to set configured property "/atg/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /atg/userprofiling/search/ProfileOutputConfig
**** Error Fri Mar 15 10:42:22 IST 2013 1363324342049 / Unable to create class atg.search.routing.LiveIndexingService for configuration /atg/search/routing/LiveIndexingService java.lang.ClassNotFoundException: atg.search.routing.LiveIndexingService from BaseClassLoader@52d058d1{vfsfile:/C:/jboss-eap-5.1/jboss-as/server/ATGPublishing/deploy/ATGPublishing.ear/} java.lang.ClassNotFoundException: atg.search.routing.LiveIndexingService from BaseClassLoader@52d058d1{vfsfile:/C:/jboss-eap-5.1/jboss-as/server/ATGPublishing/deploy/ATGPublishing.ear/}
**** Error Fri Mar 15 10:42:22 IST 2013 1363324342049 / at org.jboss.classloader.spi.base.BaseClassLoader.loadClass(BaseClassLoader.java:477)
**** Error Fri Mar 15 10:42:22 IST 2013 1363324342049 / at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
**** Error Fri Mar 15 10:42:22 IST 2013 1363324342049 / at atg.nucleus.PropertyConfiguration.loadClassUsingReplacement(PropertyConfiguration.java:461)
Can you please help me to fix this issue.
Thanks & Regards,
Murali.Chhi,
do you have atg search installed in your environment? if so configure it properly
Edited by: Raghuram A on Mar 14, 2013 11:33 PM -
Error while bringing up ATG REST Webservice
Hi,
I am trying to bring a REST Webservice using ATG 9.3 version.I am getting the below errors in the startup of the instance.I have added "REST" module in the Manifest file and am able to see the entry " C:\ATG\ATG9.3\REST\config\config.jar" in CONFIGPATH(Please let me know if there are other ways to find if the service has come up properly).I am trying to connect to the server using JAVA based REST Client as given below.Also,i have placed the jar files in the CLASSPATH of the module.I am hoping that the webservice have not come up properly because of these startup errors.Please help me out to resolve this issue.
STARTUP EXCEPTION SEEN IN SERVER
========================
2012-06-25 06:20:36,815 INFO [STDOUT] Unable to create class atg.rest.servlet.HeadRestServlet for configuration /atg/dynamo/servlet/dafpipeline/HeadRestServlet java.lang.ClassNotFoundException: No ClassLoaders found for: atg.rest.servlet.HeadRestServlet
2012-06-25 06:21:56,325 INFO [nucleusNamespace.atg.userprofiling.sso.PassportAuthorityService] Starting passport authority service
2012-06-25 06:21:56,460 INFO [STDOUT] **** Error
2012-06-25 06:21:56,460 INFO [STDOUT]
2012-06-25 06:21:56,460 INFO [STDOUT] Mon Jun 25 06:21:56 EDT 2012
2012-06-25 06:21:56,460 INFO [STDOUT]
2012-06-25 06:21:56,460 INFO [STDOUT] 1340619716460
2012-06-25 06:21:56,460 INFO [STDOUT]
2012-06-25 06:21:56,460 INFO [STDOUT] /
2012-06-25 06:21:56,460 INFO [STDOUT]
2012-06-25 06:21:56,460 INFO [STDOUT] Unable to set configured property "/atg/dynamo/servlet/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /atg/dynamo/servlet/dafpipeline/HeadRestServlet
2012-06-25 06:22:06,528 INFO [STDOUT] Unable to create class atg.rest.RestConfiguration for configuration /atg/rest/Configuration java.lang.ClassNotFoundException: No ClassLoaders found for: atg.rest.RestConfiguration
2012-06-25 06:22:06,528 INFO [STDOUT] **** Error
2012-06-25 06:22:06,528 INFO [STDOUT]
2012-06-25 06:22:06,528 INFO [STDOUT] Mon Jun 25 06:22:06 EDT 2012
2012-06-25 06:22:06,528 INFO [STDOUT]
2012-06-25 06:22:06,528 INFO [STDOUT] 1340619726528
2012-06-25 06:22:06,528 INFO [STDOUT]
2012-06-25 06:22:06,528 INFO [STDOUT] /
2012-06-25 06:22:06,528 INFO [STDOUT]
2012-06-25 06:22:06,528 INFO [STDOUT] Unable to set configured property "/atg/rest/Initial.initialServices" atg.nucleus.ConfigurationException: Unable to resolve component /atg/rest/Configuration
CLASSPATH ENTRY
============
<classpathentry exported="true" kind="var" path="C:/ATG/ATG9.3/REST/lib/atg-rest-1.0.jar"/>
<classpathentry exported="true" kind="var" path="C:/ATG/ATG9.3/REST/lib/commons-fileupload-1.2.1.jar"/>
<classpathentry exported="true" kind="var" path="C:/ATG/ATG9.3/REST/lib/commons-io-1.4.jar"/>
<classpathentry exported="true" kind="var" path="C:/ATG/ATG9.3/REST/lib/dom4j-1.6.1.jar"/>
<classpathentry exported="true" kind="var" path="C:/ATG/ATG9.3/REST/lib/log4j-1.2.15.jar"/>
<classpathentry exported="true" kind="var" path="C:/ATG/ATG9.3/REST/client-lib/java/atg-rest-client-1.0.jar"/>
REST CLIENT:
========
import java.util.HashMap;
import java.util.Map;
import atg.rest.client.RestClientException;
import atg.rest.client.RestComponentHelper;
import atg.rest.client.RestResult;
import atg.rest.client.RestSession;
public class RestClient {
RestSession mSession;
protected void execute() throws RestClientException {
System.out.println("inside execute");
mSession = RestSession.createSession("localhost", 8080, "<USERNAME>", "<PASSWORD>");
mSession.setUseHttpsForLogin(false);
try {
mSession.login();
System.out.println("Login Successful");
catch (Throwable t) {
System.out.println(t);
finally {
try {
mSession.logout();
System.out.println("Logout Successful");
catch (RestClientException e) {
System.out.println(e);
* @param args
public static void main(String[] args) {
System.out.println("inside main");
// TODO Auto-generated method stub
RestClient testATGRest = new RestClient();
try {
testATGRest.execute();
catch (Throwable t) {
System.out.println(t);
REST CLIENT ERROR SEEN:
=================
atg.rest.client.RestClientException: java.io.IOException: Not Found http://localhost:8080/rest/bean/atg/userprofiling/ProfileServices/loginUser
atg.rest.client.RestClientException: This session is not logged in and cannot be logged outI am trying to expose a method using REST Webservice and access the method using the browser.I have followed the steps specified in the thread:
http://ecomwriter.com/2012/03/19/building-restful-web-services-using-atg/ .Have added a component called ProfileRESTWebservice and have defined a method “getLoginInfo” in the class file. The following entry is placed in the restSecurityConfiguration.xml
<resource component="/atg/userprofiling/ProfileRESTWebservice" secure="true">
<method name="getLoginInfo" secure="false"></method>
</resource>
But, I am receiving the following exception when trying to access the method using http://localhost:8080/rest/bean/atg/userprofiling/ProfileRESTWebservice/getLoginInfo
10:07:33,147 ERROR [BeanServlet] Error code: 400
atg.beans.PropertyNotFoundException: Can't find property named: getLoginInfo in class: com.vs.commerce.profile.ProfileRESTWebservice
Can't find property named: getLoginInfo in class: com.vs.commerce.profile.ProfileRESTWebservice
atg.rest.RestException: atg.beans.PropertyNotFoundException: Can't find property named: getLoginInfo in class: com.vs.commerce.profile.ProfileRESTWebservice
at atg.rest.output.RestOutputCustomizerImpl.outputBeanProperty(RestOutputCustomizerImpl.java:616)
at atg.rest.processor.BeanProcessor.doRESTGet(BeanProcessor.java:157)
at atg.rest.servlet.RestPipelineServlet.serviceRESTRequest(RestPipelineServlet.java:394)
at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:237)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:298)
at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:241)
Can you pl help me out on this? -
ATG 10.0.1 Install on weblogic 10.3.5(6): Want to install Nucleus component
Hi All ,
I am very very new to ATG product and i got a requirement to install ATG 10.0.1 on weblogic server 10.3.5/6 & configure only Nucleus components.
Please help me by sharing your thoughts / ideas how I can carry out this activity steps.
I have installed the below products now
1) weblogic server 10.3.6 on llinux machine
2) Installed the Oracle DB 11g on same linux box.
3) Downloaded the ATG-10.0.1 software from oracle redelivery site.
Please share me the next steps, how to start the installation.
Regard's
MSNFor installing ATG , nothing much ,
set following Environment variables
JAVA_HOME ,e.g : F:\Oracle\Middleware\jdk160_24
Add Java bin folder to PATH : eg :F:\Oracle\Middleware\jdk160_24\bin
Then run ATG Installer - > accept licence aggrement - > Choose all components ( can deselect mysql as you have oracle ) - > Select application server as weblogic and give values in next step :
eg:
RMI port : 8860,Listen Port : 7001
Oracle middleware directory : f:\oracle\middleware
Weblogic home : f:\oracle\middleware\wlserver_10.3
Domain path : f:\oracle\middleware\ user_projects\domains\XYZ
Jdk home : f:\oracle\middleware\jdk160_24
You are done with installation. -
[Endeca 3.1.1 + ATG 10.1.2] @FileNotFound error while requesting a page
When I am requesting for a Endeca page (say "dil"), I am getting the following error:
18:40:58,306 INFO [AssemblerPipelineServlet] DEBUG Allowed mime type null for assembly of URI /crs/dil
18:40:58,306 INFO [AssemblerTools] DEBUG Assembling content for {contentUri=/pages/dil, @type=ContentInclude}
18:40:58,321 ERROR [AssemblerTools] A problem occured assembling requested content. Response from the assembler was {contentUri=/pages/dil, @type=ContentInclude, @error=FileNotFound}
Also every 1 minute, I keep getting the following error in console (My machine IP is 172.21.21.64):
19:14:40,658 SEVERE [LiveContentClient] Shutting down and reconnecting client [172.21.21.64:3899]. Encountered exception: java.io.IOException: An established connection was aborted by the software in your host machine
19:15:25,141 SEVERE [LiveContentClient] Shutting down and reconnecting client [172.21.21.64:3899]. Encountered exception: java.nio.channels.ClosedChannelException
19:15:28,047 SEVERE [LiveContentClient] Shutting down and reconnecting client [172.21.21.64:3899]. Encountered exception: java.nio.channels.ClosedChannelException
19:15:29,672 SEVERE [LiveContentClient] Shutting down and reconnecting client [172.21.21.64:3899]. Encountered exception: java.nio.channels.ClosedChannelException
Thanks in advance
DilrozSo the various Endeca modules were moved between 10.0.3 (where they were shipped with CRS with module names that began with "Endeca", like "Endeca.Index", "Endeca) and 10.1.1 and later (where they were moved to their more permanent homes, like DAF.Endeca.Index, DCS.Endeca.Index, etc).
For a complete list of the locations of Endeca modules in 10.1.2, see the "ATG Modules" section of http://docs.oracle.com/cd/E36434_01/Platform.10-1-2/ATGEndecaIntegrationGuide/ATGEndecaIntegrationGuide.pdf .
CRS in 10.1.2 and later depends upon the Endeca and the ATG Endeca integration modules, and CIM should pull in the needed ATG modules automatically for CRS.
Maybe you are looking for
-
Where to see whether print is availabel or not
Hi all, My report server is running in Solaris mechine, we installed a printer on the same mechine. When i try to run a report and print directly thru the same printer, i am getting the following message. REP-3002: Error initializing printer. Please
-
I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions
-
Airport express cannot be detected in one of my Macs
Both our macbooks are connected to our network but my imac cannot detect the airport express. The imac can detect the network I am trying to join but I cannot connect to it. I open airport utility but it cannot find the airport express. What should I
-
How do you show the number of emails in Mail folders?
Hi, I'm a little lost with the new Mail format. It was really helpful for me to know the number of emails that were in my Mail folders - it used to tell me at the top. But since I upgraded to Yosemite, I don't see that as an option. Can someone tell
-
Safari history disappeared before my eyes
I was viewing my history (first time since upgrading to Yosemite) and whilst doing so, and without touching anything, my history disappeared except for 2 sites for yesterday (I had viewed dozens yesterday and was in the middle of looking for one of t