Validating components even with autosubmit and immediate

Greetings:
I am working in a application using ADF 11g. In my page, I have a <af:selectOneRadio> with two options (selectItem). These selectItem's have both immediate and autoSubmit attributes equal to true. Next, there is a <af:panelGroupLayout> which partialTriggers attribute points to prior selectOneRadio. Inside panelGroupLayout, there are some <af:inputText>'s. All of them are required. Depending of selectOneRadio value, some inputs will have their label changed, while others will be (or not) renderized. After this panelGroupLayout, I have a <af:commandButton>, where there will be the real submission.
What I was expecting was, when I changed the select value, a partial submission would be done, without validation, and changed the labels or rederization of components inside panelGroupLayout. However, the components are being validated. The error messages are shown and the components chagings are not happening.
Googling for some solution (https://www.google.com.br/search?q=adf+not+validate+at+partial+submit) , I found some suggestions that either did not work or thought too complicated (e.g. Use a subform and configure the page definition XML (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/40-ppr-subform-169182.pdf)). I think that there is a simpler solution, but I could not found it.
Below my JSF code:
   <af:form id="formCadastroUsuarioLicitacoes" usesUpload="true">
       <af:panelGroupLayout halign="end" id="pnGL1">
            <af:selectOneRadio id="radioType" value="#{viewScope.myManagedBean.type}" immediate="true" required="true"
                                    styleClass="radioType" autoSubmit="true">
               <f:selectItem itemLabel="Type A" itemValue="a" id="itemA"/>
               <f:selectItem itemLabel="Type B" itemValue="b" id="itemB"/>
            </af:selectOneRadio>
               <af:panelGroupLayout id="panelGroupForm" partialTriggers="radioType" styleClass="AFStretchWidth">
                 <af:inputText id="txfDoc" value="#{viewScope.myManagedBean.document}"
                                   label="#{(viewScope.myManagedBean.type == 'b')? 'Doc B': 'Doc A'}" required="true"
                                   />
                 <af:inputText id="txfcompany" value="#{viewScope.myManagedBean.company}" label="company"
                                   rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
                 <af:inputText id="txfName" value="#{viewScope.myManagedBean.name}"
                                   label="#{(viewScope.myManagedBean.type == 'b')? 'Your Name': 'Name'}" required="true" />
                 <af:inputText id="txfEmail" value="#{viewScope.myManagedBean.email}" label="Email" required="true" />
                 <af:inputText id="txfEmailConfirm" value="#{viewScope.myManagedBean.emailConfirm}" label="Confirm your Email"
                                   required="true" />
                 <af:inputText id="txfphine" value="#{viewScope.myManagedBean.phine}" label="phine"
                                   rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
                 <af:inputText id="txfFax" value="#{viewScope.myManagedBean.fax}" label="Fax"
                                   rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
               </af:panelGroupLayout>
            <af:commandButton text="Submit" id="btnsubmit" action="#{viewScope.myManagedBean.save}"/>
       </af:panelGroupLayout>
  </af:form>Thanks,
Rafael Afonso
Edited by: 993323 on 04/04/2013 13:50

Hey,
I hate to be the one to link Oracle docs. Have you read this part though? http://docs.oracle.com/cd/E23549_01/web.1111/b31973/af_lifecycle.htm#CIAIDFGC
I also know that one of the Oracle Ace people wrote a blog on this. I think it was Timo, but I couldn't track it down. It has been awhile since I read it.
Anyhow, my suggestion would be to look into the lifecycle methods that get skipped when the immediate value is set and see if that makes your problem any clearer to you.
I am sorry I couldn't be of more help, I have only looked a little bit into field validations and the immediate field.
Best of luck,
Dustin

Similar Messages

  • I have a new 160GB iPod Classic. I often listen to it for many hours at a time. Even with Itunes and the Classic set on shuffle it repeats songs often and only plays a small fraction of my songs. Help!            of my

    When listening for hours to my new Clasic 160 with several thousand songs and both itunes and the Classic set to shuffle all songs it only plays a small fraction of my library and plays many songs several times over that period. It also seems to pick a small different group of songs to repeat without touching many of most of my songs each time I start listening. Over 98% of the music is legally owned in my CD collection. A few are down loads which play! There should be no issues with ownership. Please help. As much as I like all my tunes I want to actually hear them all. There are many many albums that have never been played.

    Okay, well we've eliminated a couple of things.
    One thing I have noticed about the iPod Classic: I suspect that "shuffle" is actually a Playlist, not a real shuffle. The Classic is not as powerful as iTunes or a desktop/computer, so it cannot truely "shuffle songs". I suspect what happens is that every Sync of the Classic with its iTunes Library causes a revised "shuffle playlist" to be put on the iPod and then, when you choose Shuffle play, it actually uses that special hidden "shuffle playlist".
    So one trick is to Sync your iPod with iTunes frequently. This would change the "shuffle playlist". Another trick would be to create your own Playlists, either by adding what you want to a Regular Playlist or by creating a Smart Playlist which adds and removes songs by itself.
    Smart Playlists: for example, you can create a Smart Playlist (in iTunes) which contains a random selection of all songs, or a random selection of a particular group of songs, provided the song has not been played for a period of time, say six months, or 300 days. Every Sync of the iPod with iTunes would remove any song from that Smart Playlist if it has been played. That same song cannot go back into the Playlist for a period of six months, or whatever you choose.
    This way, you can reduce the likelyhood of hearing the same songs too often. This brings me to another point. If you have the same song, on different albums, then it's possible that you are hearing that same song but from both albums.
    Try this: in your iTunes Library,
    look for and click on the big + button and choose New Smart Playlist..., if you do not have the Sidebar displayed, switch to the Playlists view where you will find it in the bottom left corner,
    Set it up to look like this:
    It creates a list of songs that have not been played for fifteen weeks. It excludes videos and in my iTunes Library, it has 527 songs in it. If you would like a smaller list than that, click on the Limit to and fill in the number of songs you want.
    Having set it up, play some songs from it (in shuffle mode if you wish) and watch how it changes . The song must play through to the end of the track before it is classed as "played". If you like it, let it go onto your iPod. You could set up a few Playlists, each with their own rules. Even if a song appears in two different Smart Playlists, if you have the "last played is not in the last" rule in both lists, then playing the song will eliminate it from both lists. None of this removes songs from the iPod (unless you use Sync selected Playlists...).

  • ADF Faces: af:input text with autosubmit and tabbing

    We have a series of af: inputText fields in a table. The autosubmit attribute is set to true so that we can process the change and also update some totals in the table. Only trouble is the user has to tab out of the cell twice. The first tab submits the change, the second moves the focus to the next cell.
    This really is not user friendly. Any ideas to fix/workaround this???

    G'day RZ
    How are you doing the PPR? Using the partialTriggers attribute or programmatically in your ValueChangeListener?
    This is what I tried:
    A page:
    <af:inputText label="Label 1"
                  binding="#{backBean.inputText1}"
                  id="inputText1"
                  autoSubmit="true"
                  valueChangeListener="#{backBean.doSomething1}"/>
    <af:inputText label="Label 2"
                  binding="#{backBean.inputText2}"
                  id="inputText2"
                  autoSubmit="true"/>
    <af:inputText label="Label 3"
                  binding="#{backBean.inputText3}"
                  id="inputText3"
                  autoSubmit="true"
                  partialTriggers="inputText1"/>And in my backing bean the following ValueChangeListener:
    public void doSomething1(ValueChangeEvent event) {
      String value1 = inputText1.getValue() == null ? null : inputText1.getValue().toString();
      String value2 = inputText2.getValue() == null ? null : inputText2.getValue().toString();
      inputText3.setSubmittedValue(null);
      inputText3.setValue(value1 + value2);
    }On running the web page, entering a value in inputText1 and tabbing out, the cursor correctly moves to inputText2 with inputText3 being updated via the PPR and ValueChangeListener.
    So I'm guessing you're doing something interesting in your ValueChangeListener to exhibit the problem you're seeing.
    With apologies if I'm telling you to suck eggs here, but best start with the basics and eliminate them first.
    CM.

  • JVM Java heap space Error || even with -Xms- and -Xmx commands

    hi all, i got a problem by allocating a very great boolean array.
    first of all, here is my testcode:
    public static void main(String[] args) {
              boolean[] testfield = new boolean[70000000];          
              while(true){
              //NOP     
         }as you see, i try to allocate an array with 70.000.000 boolean values - as 1 boolean may be represented as at least one physical bit we calculate the total amount of needed RAM-Space:
    70.000.000 bit / 8 = 8750000 byte
    8.750.000 byte = 8.75 MByte
    My System ist WinVista Ultimate 64-bit running on a Quadcore T2200 with 2GB-DDR3 RAM
    Looking in my Vista Ressourcemanager shows, that eclipse.exe reserves about 1.023 Mbyte....
    As IDE I use eclipse
    my eclipse.ini looks as follows:
    -showsplash
    org.eclipse.platform
    --launcher.XXMaxPermSize
    256M
    -vmargs
    -Dosgi.requiredJavaVersion=1.5
    -Xms512m
    -Xmx1024m
    -XX:PermSize=512mby using following VMCommand "-XX:+PrintGCDetails" and running the above code the output displays:
    [GC [DefNew: 180K->63K(960K), 0.0008311 secs][Tenured: 43K->107K(4096K), 0.0060371 secs] 180K->107K(5056K), 0.0069249 secs] [Times: user=0.00 sys=0.00, real=0.01 secs]
    [Full GC [Tenured: 107K->105K(60544K), 0.0044835 secs] 107K->105K(61504K), [Perm : 17K->16K(12288K)], 0.0045553 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
    Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
         at termain.main(termain.java:15)
    Heap
    def new generation   total 4544K, used 163K [0x246a0000, 0x24b80000, 0x24b80000)
      eden space 4096K,   4% used [0x246a0000, 0x246c8fe0, 0x24aa0000)
      from space 448K,   0% used [0x24aa0000, 0x24aa0000, 0x24b10000)
      to   space 448K,   0% used [0x24b10000, 0x24b10000, 0x24b80000)
    tenured generation   total 60544K, used 105K [0x24b80000, 0x286a0000, 0x286a0000)
       the space 60544K,   0% used [0x24b80000, 0x24b9a420, 0x24b9a600, 0x286a0000)
    compacting perm gen  total 12288K, used 16K [0x286a0000, 0x292a0000, 0x2c6a0000)
       the space 12288K,   0% used [0x286a0000, 0x286a41c0, 0x286a4200, 0x292a0000)
        ro space 8192K,  62% used [0x2c6a0000, 0x2cba2ba0, 0x2cba2c00, 0x2cea0000)
        rw space 12288K,  52% used [0x2cea0000, 0x2d4e88e0, 0x2d4e8a00, 0x2daa0000)so can anyone tell me please, how i manage to allocate bigger arrays? or where at least is the problem?
    Originally i was thinking like that way: Integer.MAXVALUE = (2^32)-1
    => biggest index an array can have
    => biggest allocation possible with ints weights (((2^32)-^1)/8)/1000*1000 = (round) 537 MByte < 2GByte => everything fine .... but it seems like not :-(
    When i try to allocate 60.0000.000 it works fine....but that is far not enough :-&
    thank you very much for your helping answers!

    The Sun Java virtual machine stores booleans as bytes, not bits, so for an array of 70 million booleans you need 70 million bytes, plus 8 bytes for the object header, and 4 bytes for the array length.
    I suspect that your eclipse.ini controls the JVM running the Eclipse IDE, not the JVM running your application. Note that in the -XX:+PrintGCDetails output at the end, it shows you running out of memory with 4MB of young generation and 60MB of old generation. That's the default configuration, as if you hadn't specified -Xms and -Xmx.
    The array of 60 million booleans only requires 60 million bytes (plus overhead), which fits in the default old generation.
    I think you need to put the -Xms and -Xmx in the same place you put the -XX:+PrintGCDetails, since that does seem to display information about the JVM running your application, not the JVM running Eclipse.

  • Flash embed tag does not obey percentage size, even with html and body at 100%

    For some reason i cannot get this swf file to show at 90% width and height. i have tried adding a style sheet in the header to explicity set the html and body to 100% but this still does not help. can anyone see if there is a problem in the code?
    <pre><nowiki><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <title></title>
    <style type="text/css">
    html, body {
    margin: 0;
    padding: 0;
    height: 100%;
    width: 100%;
    </style>
    </head>
    <body>
    <center>
    <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0" width="90%" height="90%" ID="Captivate1">
    <param name="movie" value="tutorial.swf">
    <param name="quality" value="high">
    <param name="menu" value="false">
    <param name="loop" value="0">
    <embed src='tutorial.swf' width='90%' height='90%' quality='high' pluginspage='http://www.macromedia.com/go/getflashplayer' type='application/x-shockwave-flash'/>
    </object>
    <BR>
    <p>
    <align=center><a Href="javascript:window.close();">Close Window</a>
    </p>
    </center>
    </body>
    </html></nowiki></pre>

    That may happen because of the &lt;center&gt; element that doesn't have a height and width specified. Remember to specify dimensions for all containers if you use percentages, otherwise you may end up with 90% of 0 or a default value.

  • Very Loud Hum Even With Isolator and Nothing Connected

    I have a Creative 6.1 6600 speaker set.
    The speaker power supply is hooked up to a very nice 4-level isolator.
    NOTHING is hooked up to the subwoofer other than the power cable and volume control.
    Yet when I turn it on, the hum is still loud enough to be heard everywhere in a fairly large house.
    I've almost given up hope on the issue. I've ran out of ideas and am ready to just throw the woofer out as being broken. Any final suggestions before I scrap it entirely?

    If it's humming that loud with nothing but the power and volume control hooked up, then it is probably bad, and you should check into either warranty service, or a new set of speakers. Sorry.
    Good luck!
    Dale

  • JBO-25054 after insert (with save) and immediate delete

    After inserting a record, saving it, and immediately marking it to ‘Delete’ and clicking on ‘Save’, then an error occurs:
    oracle.jbo.JboException: JBO-25054: Cannot locate the specified stack snapshot id: beforeModelUpdate at oracle.jbo.server.ApplicationModuleImpl.validateSnapshotName(ApplicationModuleImpl.java:7472) ...
    But after logging in again, the record can be deleted, but then the user has to remember which record has to be deleted.
    The application runs on Apache Tomcat 5.5.12 and is developed with JHS10.1.2.0.19 and JDeveloper 10.1.2.0.0.

    The problem was that there was a default value in the database, but not in BC4J, so if no value was filled in, then within the database, the default value was used, so there was inconsistency.

  • My antivirus found and removed a virus called Hijacker.DosPop_Toolbar, and now Firfox browser will not open, even with uninstall and reinstall?

    I have uninstalled version 8 and tried to go back to an earlier version, but browser still will not open.

    Delete the Program Files for Firefox and install a freshly downloaded Firefox_setup file.
    http://www.mozilla.com/en-US/firefox/

  • AutoSubmit and RichTextEditorInsertBehavior collision

    Hi OTN,
    I have a problem with AutoSubmit and RichTextEditorInsertBehavior.
    On my ADF JSF page there is RichTextEditor. It is bound to CLOB VO attribute.
    The component has two additional options.
    1. There is a popup with big (in size) RTE bound to the same VO attribute - used for comfortable editing. The values of both RTEs should always be synchronized.
    2. There is also another popup (without RTE) where you can choose some items to insert into text. RichTextEditorInsertBehavior is used and items should be inserted to the position in the text where cursor was (this is common for RichTextEditorInsertBehavior).
    The problem is: to keep both RTEs sync I set AutoSubmit="true" for the first RTE.
    But as a side effect the RTE is redrawn at focus loss and cursor position resets - RichTextEditorInsertBehavior inserts text at 0 position instead of previous cursor position.
    How can I keep both components' value sync and have an ability of text inserting?
    Thanks.
    JDeveloper 11.1.1.3, ADF BC
    Edited by: ILya Cyclone on Dec 14, 2010 6:42 PM

    I don't see any way of manipulating the cursor position, and as you have seen, it apparently resets to the beginning of the field when it is refreshed as part of a PPR request.
    John

  • 9300 turns off even with full battery

    Hi, I hope somebody can help me... Long story here...
    I bought my 9300 in Istanbul, where I live. I have a Vodafone Turkey simcard and Vodafone Spain simcard. I swithch simcards when I travel, works beautifully, even with email and whatsapp.
    Last year I had an issue whith battery draining in less than 2 hours every morning. After reinstalling software and getting rid of all apps (incl whatsapp) it eventually came back to life and the battery started lasting for 2 days again. I must say I did the upgrade of OS while in Spain (I don't know if it makes a difference...)
    A couple of weeks ago (now I am in Istanbul), same thing happened. It is just that this time the battery doesn't drain, the phone just shuts itself off, normally in the middle of a conversation or trying to send a whatsapp, and with full battery.
    The first few times, taking the battery off and sim and putting it back in did the trick. After a couple of times, however, it is not working anymore. This it what happens:
    BB turns off completely.
    If I try to turn on, it does not even try.
    If I remove battery and simcard, it restarts and is ok in all processes but when it is looking for network signal, it turns off again.
    I remove battery and simcard second time, and it does not go through the software verification, it turns off again.
    After this, the only way to bring it back to life is to plug it in, and then it restarts and with full battery!! I unplug and I can use email for the next 3-4 hours, until some hours later, same problem all again. I carry my charger everywhere!
    I have the latest OS available, and I have got rid of whatsapp, which last year I think it was the beginning of the solving of the problem (whatsapp releases new versions constantly, I think upgrading it did the trick. Or was it just chance?), but it is still not helping so far.
    My husband has the same model, never a problem. We exchanged the batteries, no luck either.
    Any ideas?

    Mucolly wrote:
    Help guyz my phone turns off itself with a full battery of which I deceded to buy new original battery but problem persist and when I charge its working when I unplug my phone goes white on the screen which is switching itself off help guyz.
    Hi and Welcome to the Community!
    There are many things already posted in this thread...have you yet read and attempted any of them?
    You also may want to attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But, if the behavior continues, you may need to consider more drastic actions -- e.g., WIPE, OS Reload, BBSAK Wipe/Reload, "bare bones" OS loading, etc.
    Do also keep in mind that, if the problem is at a hardware level, then no amount of self-diagnosis nor internet-distance recommendations will be of any use...only in-hand evaluation by a qualified hardware technician can properly diagnose a hardware problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Autosubmit and CRUD

    Hi.
    JDeveloper 11.1.1.2, jsff, bc4j
    From a field with Autosubmit and a valueChangeListener I want to do a SELECT and based on the result perhaps an UPDATE. Hence I need a database connection.
    QUESTION:
    What is the best way to get access to the database in the above scenario:
    a)
    by writing the code into the ApplicationModuleImpl and execute this code.
    b)
    by writing a managed bean that do a create/get an ApplicationModuleImpl and then in turn get the dbConnection from there.
    Best regards
    Erik

    Put any DB code in your model layer, so in that respect, option A.
    Then, expose the service method in your AM to the client interface and create a method binding for it in your page definition and call it through the binding layer.
    In general, if you are using ADF binding, don't ever deal with AMs directly in your view layer.
    John

  • Internet Traffic Even When Mail And Safari Shutdown?

    I have just noticed that my SurplusMeter is detecting slight internet traffic even with Safari and Mail shutdown.
    I have, of course, Surplus Meter open, together with ClamXav.
    The Bytes Up and Bytes Down fields jump a few hundred every 5 seconds or so and when timed, the meter moved by 0.1MB every 4 minutes.
    This would represent about 1.5MB per hour and over 20MB per working day (8am to 11pm) which I would have noticed before as I frequently use less than 10MB per day.
    In the past I have come back to my meter after hours and it hasn't moved.
    Any ideas what might be causing this slight trickle of activity?

    I have just noticed that my SurplusMeter is detecting slight internet traffic even with Safari and Mail shutdown.
    I've never used SurplusMeter, but if it's like any of the other bandwidth monitoring tools I've seen it's not watching your internet traffic, it's watching your ethernet traffic.
    There is an important difference. Even if the only device on your network is your Mac and your router there will always been some background noise.
    Amongst other things, ethernet uses ARP - Address Resolution Protocol - to map IP addresses to physical devices on the network. It does this by sending out an ARP request for any device the machine needs to talk to. For example, if your Mac has the IP address 192.168.1.2 and a default router address of 192.168.1.1 then it will send out an ARP request 'hey! where is 192.168.1.1', to which the router will reply "hey! I'm over here'. That's two packets of data, even if there is no other activity or device on the network.
    IIRC, ARP replies are cached for 5 minutes after which the OS sends out another ARP reply to update its ARP table, which ties in exactly with the interval you're seeing.
    I'd further guess that 0.1MB is the smallest unit of measurement that SurplusMeter reports, so even the 28-byte ARP request and play packets get reported as 0.1MB
    Furthermore, by definition, ARP is limited to the local network and never transmits over your ISP link, so it's not going to count towards any bandwidth usage limits.
    So this isn't likely to be anything to worry about. You can confirm this with any of the ethernet sniffers, or even just a simple tcpdump in Terminal.app

  • Help! i need to get components id with error validation!

    Hi guys, im really new in jsf, i have a tabset, in with several tabs generated dinamically, each tab have several components generated dinamically as well, im trying to get all components id which have validation errors, and show in the page an alert summary with the name of tabs which have the components with error validation, to do that, i will have to get the components id with error validations, so i will get the tab name which contains it.
    I tried to use this, but didnt work for other components in others tabs than tabSelected.
    public void prerender() {
    Object tmp="";
    FacesContext context = FacesContext.getCurrentInstance();
    Iterator iter = context.getClientIdsWithMessages();
    while(iter.hasNext()){
    Object obj = iter.next();
    This detect components in the current tab, because they are who have messages.
    Please guys, hopefully you could help me at this, ive been trying to achieve this since 3 days ago, im really desperated, i dont know, if i could do this using some of jsf, otherwise i will have to do validation components manually.
    By the way guys:
    How do i do to call the validation phase, when im using a button with inmediate = true. Thats, because i could do a method to validate components (manually) and then call the validation phase, to show the input errors to user.
    Thanks in advanced,
    Yellr
    Message was edited by:
    yellr

    I suggest you do this stuff in the event handlers, such as in the action handler , such as in the tab action handler.

  • Some problems with af:table (new rows with presetting and autosubmit)

    Hi, I'm working with an af:table, but I'm having some troubles.
    Background:
    Jdev 11.1.1.5.0
    Firefox 6.0.2
    In the Bounded Task flow:
    ExecuteWithParams -> fragment < commit/rollback
    ExecuteWithParams: Set a bind variable with a value from bpm payload for get only rows with that value.
    In the fragment:
    An af:table with a button CreateInsert (the new rows need to use the value of the payload in the hidden column, i don't know how do this, assign the value to the #{row.bindings.IdDistribution.inputValue}) [First problem]
    The inputText of the af:table has the autoSubmit in true. The first time that I fill the cells I got this error in each entered value, after press the tab key.
    ADF-FACES- 60097... ADF_FACES-60096:Server Exception during PPR, #n (where n is 1,2,3,4 for each cell). [Second problem]
    When I press the Commit Button, all values from cells dissapears. And I got the message from validator that cells can't be null. [Third problem]
    If I fill cells again, all work right. Validations, no errors ADF_FACES-60096 and a successful commit.
    How I can solve these problems?
    Thanks in advance.

    Hi,
    you need to bind the value property of the selectOneRadio to the row variable. Say the button updates an attribute "q1" then the value property should point to #{row.bindings.q1.inputValue} assuming you use ADF and ADF BC. The question svary I assume., so you need to query thequestion for each row. For this reference a managed bean doe the f:selectItems and in the managed bean use the #{row} attribute to get a hold of the current rendered row (instance of JUCtrlHierNodeBinding if ADF is used. This has a method getRow() to obtain the Row object). The list then returns the answers to select from
    Frank

  • Mac book pro is very very slow/it hangs for even the smallest tasks/even with the lid closed it is still running if it is not completely turned off. Dose any one know what may be wrong ? and how to fix it?

    More details about the problem : My computer is a Mid 2012 Mac Book pro 2.9GHz i7 processor with 8GB RAM updated to OS X v10.8.5
    - I ran a compleet scan of my computer for any threats ( I used virus barrier express ) and there was nothing identified
    - When I oppened the Activiti Monitor there are about 20-30 processes which I do not undersatand they are run under the user "root" 2 in perticular ( Kernel_task & fseventsd ) they both take up a lot of threads and kernel_task is constantly using 1.2 GB of "real memory" which is at least 20 times any other process that is running espesially the ones that run under the user "Apple" I do not know if this is causing the problems on my mac but i tryed to forces close it and it dose not even let me click the button, the others close but reopean immideatly. I will attach a screen shot of what i have mentioned here.
    - The problems I am facing are mainly performance :- To state a few examples, my mac dose not seam to be able to handile even the smallest tasks like switching tabs on safari, typing any thing, playing a movie withought stopping inbetween, etc.. ( let me elaborate on why I said its not able to handil these tasks, it is because when I am trying to do any one of the afformentioned tasks inbetween the cursor becomes a rainbow collered spinning disk and I am unable to do anything for about 10 seckonds after which it starts to work again for some time before it happens again. )
    - Another concern of mine is that my mac seems to be on even with the lid closed if I do not shut it down compleetly, if i just close the lid after some time the computer starts warming up, and the fan starts running. the battery is drained at the same rate or slightly less rate than it would have if i was using it normally with the lid opean. ( altough this is happning the screen dose not turn on untill the lid is opean again )
    - I have only 300+ GB full out of my 750GB so i believe these are not issues caused by my mac's memory being full ( BUT THE FIRST TIME I NOTICED THIS WAS HAPPNING WAS WHEN MY MEMORY WAS ABOUT 720GB FULL WHEN THESE ISSUES FIRST AROSE I IMMEADITLY DELEATED 400+GB OF MY USELESS FILES THAT I HAD BEEN HORDING ALL OF WHICH WERE MOVIES ) that about covers it all PLEASE LET ME KNOW IF ANY ONE KNOWS WHAT TO DO.
    Ps: I apoligize if I have given too many unrelevant details, not enough usefull information and or if i was just all over the place with my explanations but I am really frustrated and was hoping not to miss anyting. Please let me know if any information at all is required and ill do my best to provide it.
    Thank You

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

Maybe you are looking for

  • Returning Laptops - HELP

    Hi, I bought a Lenovo U400 for a grand in the US and this thing overheated with some cooling systems failing in the third week of use. I bought my system on the 29th Feb, but it failed in the 2nd week of April. I do not trust Lenovo now and want to c

  • How to upload a file from java to php

    hi i am trying to upload/send a file from client using swing/applet and receiving it with php code. here is the php code which uploads the post file from the client $uploaddir = "/home/raghavendra/Documents/"; $file = basename( $_FILES["uploadedfile"

  • Logic of G/L account while creating initial stock.

    Dear all, When creating initial stock-trcode MB1C movement type 561- SAP requests a G/L account. I think in other material movement types, SAP requests a G/L account same as here. What is the logic here? Why SAP request G/L accounts for these process

  • Transfer video from iPhone to iMac

    HOW do I transfer videos from iPhone to iMac

  • Draw line in illustrator cs2

    hi, i am new to adobe illustrator cs2. is there any other method to draw line other than s setEntirePath(). thanks in advance,