Validation Failed for C:\winnt\system32\vsinit.dll
I am running VPN Client 4.6.00.0045 on Windows 2000 and when I reboot I get the an error that reads "Validation Failed for C:\winnt\system32\vsinit.dll"
It seems the VPN Service is not starting. A reinstall will not fix it. I do not have ZoneAlarm or any other personal firewall installed. Any help would be appreciated.
I'm not sure if the steps described at this URL will help your issue or not. There is quite a bit of information in the post that may be of some help.
http://forum.zonelabs.org/zonelabs/board/message?board.id=Off-Topic&message.id=5155
On my system, I do not have ZoneAlarm and installed at all and I have the vsinit.dll file on my system. I suspect that it is installed with the Cisco VPN Client. There is reference to this file in bug CSCec41278 that leads me to this conclusion. The version of the VPN client that I have installed is 4.6.00.0049.
HTH
Steve
Similar Messages
-
when right clicking mouse on folder or icon
Probably it is a Zone Alarm error. Do you have it? Deactivate it and try again.
thank you -
The problem is that Max will not open correctly, therefore rendering Labview useless as it can not use any of the PCI Cards in the PC.
When MAX is run, the program opens as normal, i.e. it presents the MAX explorer screen. Approximately 2 seconds later it displays the message:
Initialization of the dynamic link library C:\WINNT\System32\nipalu.dll failed.
The process is terminating abnormally.
therefore labview cannot detect any devices or signal names.I have had the problem fixed after a trip NI
Im putting the fix on this forum incase anybody else is having the same problem, or has it occur in the future.
In short for some reason, Labview has moved the nipalu.dll file from its original place in memory, therefore MAX can not find it to initialize it.
Steps for correction:
1) Download palBase Utility from NI.COM
2) Copy palBase Utility onto the C: Drive on the PC
3) Go to the START menu and select RUN
4) type COMMAND and press Enter
5) In the command prompt type
palBase -b 69000000 -s 45000000
6) When successful message appears, type exit and enter
7) re-boot PC and run MAX - All should work correctly
8) DELETE palBase from C: Drive -
Our app is running on jre 1.3.1_01. When we try j2re 1.4.0 we get the following dialog:
java.exe - DLL Initialization Failed
Initialization of the dynamic link library C:\WINNT\System32\ddraw.dll failed. The process is terminating abnormally.
It occurs when the application attempts to paint the splash screen for our server application. It also occurs with our client GUI.
This is the same for 6 different machines running Windows NT 4.0 service packs 5 and 6.
I don't want to make this a bug yet because it seems to work on my laptop with exactly the same software. We have sync'd the environment and verified the classpaths.I've seen potentially related problems on NT4-SP6a with J2RE 1.4.2_01. I did not get the "can't init" error that you are discussing, but I have seen other problems related to "ddraw.dll". When I run Swing applications that use viewports, scrolling causes very bad repainting problems. I think this is related to "ddraw.dll" because of the "BIT_BLIT" optimization for repainting.
Also, when I ran the Java application after running some other sequence of applications (I have not been able to duplicate the startup sequence), Java crashed with the message below rather than repainting poorly. This crash was repeatable -- I repeated it four times with identical exception traces. The stack trace indicates that the failure is in "blitWindowGraphics", and the problem was detected inside of "ddraw.dll".
I'm including this in this thred in the hopes that somebody can find a thread of commonality and fix the root cause of these "ddraw.dll" problems.
NOTE: I have not found a workaround to the problems I'm having --- I cannot run Java GUI applications on this PC.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x77132F58
Function=DllCanUnloadNow+0x665
Library=C:\WINNT\System32\ddraw.dll
Current Java thread:
at sun.awt.windows.Win32Renderer.devCopyArea(Native Method)
at sun.awt.windows.Win32SurfaceData.copyArea(Unknown Source)
at sun.java2d.SunGraphics2D.copyArea(Unknown Source)
at javax.swing.JViewport.blitWindowGraphics(Unknown Source)
at javax.swing.JViewport.blitDoubleBuffered(Unknown Source)
at javax.swing.JViewport.windowBlitPaint(Unknown Source)
at javax.swing.JViewport.setViewPosition(Unknown Source)
at com.sun.javaws.ui.general.GeneralUtilities$4.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog.show(Unknown Source)
at com.sun.javaws.ui.general.GeneralUtilities.showAboutDialog(Unknown Source)
at com.sun.javaws.ui.player.Player$13.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00407000 D:\jre\j2re1.4.2_01\bin\javaw.exe
0x77F60000 - 0x77FBE000 C:\WINNT\System32\ntdll.dll
0x77DC0000 - 0x77DFF000 C:\WINNT\system32\ADVAPI32.dll
0x77F00000 - 0x77F5E000 C:\WINNT\system32\KERNEL32.dll
0x77E70000 - 0x77EC5000 C:\WINNT\system32\USER32.dll
0x77ED0000 - 0x77EFC000 C:\WINNT\system32\GDI32.dll
0x77E10000 - 0x77E67000 C:\WINNT\system32\RPCRT4.dll
0x78000000 - 0x78040000 C:\WINNT\system32\MSVCRT.dll
0x08000000 - 0x08136000 D:\jre\j2re1.4.2_01\bin\client\jvm.dll
0x77FD0000 - 0x77FFA000 C:\WINNT\System32\WINMM.dll
0x77FC0000 - 0x77FC8000 C:\WINNT\System32\mmdrv.dll
0x74BD0000 - 0x74BE7000 C:\WINNT\System32\SNDBLST.DLL
0x716F0000 - 0x7177A000 C:\WINNT\system32\COMCTL32.dll
0x10000000 - 0x10007000 D:\jre\j2re1.4.2_01\bin\hpi.dll
0x00910000 - 0x0091E000 D:\jre\j2re1.4.2_01\bin\verify.dll
0x00920000 - 0x00938000 D:\jre\j2re1.4.2_01\bin\java.dll
0x00940000 - 0x0094D000 D:\jre\j2re1.4.2_01\bin\zip.dll
0x18270000 - 0x1837F000 D:\jre\j2re1.4.2_01\bin\awt.dll
0x77C00000 - 0x77C18000 C:\WINNT\System32\WINSPOOL.DRV
0x76AB0000 - 0x76AB5000 C:\WINNT\System32\IMM32.dll
0x77B20000 - 0x77BD1000 C:\WINNT\system32\ole32.dll
0x18380000 - 0x183D0000 D:\jre\j2re1.4.2_01\bin\fontmanager.dll
0x77130000 - 0x77156000 C:\WINNT\System32\ddraw.dll
0x18650000 - 0x1865A000 D:\jre\j2re1.4.2_01\javaws\javawspl.dll
0x77C40000 - 0x77D7C000 C:\WINNT\system32\SHELL32.dll
0x18C40000 - 0x18C5E000 D:\jre\j2re1.4.2_01\bin\jpeg.dll
0x18C60000 - 0x18C6F000 D:\jre\j2re1.4.2_01\bin\net.dll
0x776B0000 - 0x776C4000 C:\WINNT\system32\WS2_32.dll
0x776A0000 - 0x776A7000 C:\WINNT\system32\WS2HELP.dll
0x74FF0000 - 0x74FFE000 C:\WINNT\System32\rnr20.dll
0x77660000 - 0x7766F000 C:\WINNT\system32\msafd.dll
0x77690000 - 0x77699000 C:\WINNT\System32\wshtcpip.dll
0x776D0000 - 0x776D8000 C:\WINNT\system32\WSOCK32.dll
0x71280000 - 0x71286000 C:\WINNT\system32\MSIDLE.DLL
0x77BF0000 - 0x77BF7000 C:\WINNT\System32\rpcltc1.dll
0x75360000 - 0x75367000 C:\WINNT\System32\rasadhlp.dll
0x76AC0000 - 0x76ADD000 C:\WINNT\System32\imagehlp.dll
0x731B0000 - 0x731BA000 C:\WINNT\System32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 576K, used 408K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 79% used [0x10010000, 0x10076340, 0x10090000)
from space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 2136K, used 1280K [0x104f0000, 0x10706000, 0x14010000)
the space 2136K, 59% used [0x104f0000, 0x10630030, 0x10630200, 0x10706000)
compacting perm gen total 6656K, used 6474K [0x14010000, 0x14690000, 0x18010000)
the space 6656K, 97% used [0x14010000, 0x14662a48, 0x14662c00, 0x14690000)
Local Time = Tue Nov 25 21:44:39 2003
Elapsed Time = 26
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_01-b06 mixed mode) -
Process_order api - Validation Failed for Field Bill To
I am relatively new to the EBS world and I'm having some issues with calling the OE_Order_Pub.Process_order API. When I call this API I am getting a return error of "Validation failed for field - Bill To".
For a background...I have an APEX application where users can choose parts from a small part master list to add to an existing order. The existing order will not have a status of Closed or Cancelled and there will be atleast 1 line in the order before the new parts are added. The parts will be added as new lines to the order with some of the new line data defaulting to the same information as the first line. I am using EBS version 12.1.3 with a multi-org setup. It seems that the orders under one org (id=3) are working fine, but another org(id=569) they never work and keep getting the error. I am setting the context to the org of the order and initializing the apps user information with the responsibility "Order Management Super User".
Do you have any idea what could be wrong or how I can debug the error to get a little more detail?
Here is the procedure I have.
PROCEDURE TEK_ORD_PROCESS_ORDER(p_order_id IN NUMBER, p_return_code OUT NOCOPY VARCHAR2, p_status OUT NOCOPY VARCHAR2) IS
CURSOR c_order_parts IS
SELECT *
FROM TEK_APEX.TEK_ORD_ORDER_PARTS
WHERE ORDER_ID = p_order_id;
TYPE t_parts IS TABLE OF TEK_APEX.TEK_ORD_ORDER_PARTS%ROWTYPE;
v_order_parts t_parts;
--Setup variables
H_Op_Code VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_UPDATE;
L_Op_Code VARCHAR2(25) DEFAULT OE_GLOBALS.G_OPR_CREATE;
v_install_type VARCHAR2(25) := 'PTO';
v_source_id NUMBER;
v_user_id NUMBER;
v_resp_id NUMBER;
v_app_id NUMBER;
v_debug VARCHAR2(32767);
v_oracle_order OE_ORDER_HEADERS_ALL%ROWTYPE;
v_apex_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
p_header_rec OE_Order_Pub.Header_Rec_Type;
p_header_val_rec OE_Order_Pub.Header_Val_Rec_Type;
p_Header_Adj_tab OE_Order_Pub.Header_Adj_Tbl_Type;
p_Header_Adj_val_tab OE_Order_Pub.Header_Adj_Val_Tbl_Type;
p_Header_price_Att_tab OE_Order_Pub.Header_Price_Att_Tbl_Type;
p_Header_Adj_Att_tab OE_Order_Pub.Header_Adj_Att_Tbl_Type;
p_Header_Adj_Assoc_tab OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
p_Header_Scredit_tab OE_Order_Pub.Header_Scredit_Tbl_Type;
p_Header_Scredit_val_tab OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
p_line_tab OE_Order_Pub.Line_Tbl_Type;
p_line_val_tab OE_Order_Pub.Line_Val_Tbl_Type;
p_Line_Adj_tab OE_Order_Pub.Line_Adj_Tbl_Type;
p_Line_Adj_val_tab OE_Order_Pub.Line_Adj_Val_Tbl_Type;
p_Line_price_Att_tab OE_Order_Pub.Line_Price_Att_Tbl_Type;
p_Line_Adj_Att_tab OE_Order_Pub.Line_Adj_Att_Tbl_Type;
p_Line_Adj_Assoc_tab OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
p_Line_Scredit_tab OE_Order_Pub.Line_Scredit_Tbl_Type;
p_Line_Scredit_val_tab OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
p_Lot_Serial_tab OE_Order_Pub.Lot_Serial_Tbl_Type;
p_Lot_Serial_val_tab OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
p_action_request_tab OE_Order_pub.Request_Tbl_Type;
l_header_rec OE_Order_Pub.Header_Rec_Type;
l_header_val_rec OE_Order_Pub.Header_Val_Rec_Type;
l_Header_Adj_tab OE_Order_Pub.Header_Adj_Tbl_Type;
l_Header_Adj_val_tab OE_Order_Pub.Header_Adj_Val_Tbl_Type;
l_Header_price_Att_tab OE_Order_Pub.Header_Price_Att_Tbl_Type;
l_Header_Adj_Att_tab OE_Order_Pub.Header_Adj_Att_Tbl_Type;
l_Header_Adj_Assoc_tab OE_Order_Pub.Header_Adj_Assoc_Tbl_Type;
l_Header_Scredit_tab OE_Order_Pub.Header_Scredit_Tbl_Type;
l_Header_Scredit_val_tab OE_Order_Pub.Header_Scredit_Val_Tbl_Type;
l_line_tab OE_Order_Pub.Line_Tbl_Type;
l_line_val_tab OE_Order_Pub.Line_Val_Tbl_Type;
l_Line_Adj_tab OE_Order_Pub.Line_Adj_Tbl_Type;
l_Line_Adj_val_tab OE_Order_Pub.Line_Adj_Val_Tbl_Type;
l_Line_price_Att_tab OE_Order_Pub.Line_Price_Att_Tbl_Type;
l_Line_Adj_Att_tab OE_Order_Pub.Line_Adj_Att_Tbl_Type;
l_Line_Adj_Assoc_tab OE_Order_Pub.Line_Adj_Assoc_Tbl_Type;
l_Line_Scredit_tab OE_Order_Pub.Line_Scredit_Tbl_Type;
l_Line_Scredit_val_tab OE_Order_Pub.Line_Scredit_Val_Tbl_Type;
l_Lot_Serial_tab OE_Order_Pub.Lot_Serial_Tbl_Type;
l_Lot_Serial_val_tab OE_Order_Pub.Lot_Serial_Val_Tbl_Type;
l_ret_status VARCHAR2(200);
l_msg_count NUMBER;
l_msg_data VARCHAR2(200);
--Email information
v_email_address varchar2(100);
v_msg_text varchar(1000);
v_subject_text varchar(1000);
--Default line information
v_item_id NUMBER;
v_contact_id NUMBER;
v_invoice_to_org_id oe_order_lines_all.INVOICE_TO_ORG_ID%TYPE;
v_ship_to_org_id oe_order_lines_all.SHIP_TO_ORG_ID%TYPE;
v_sold_to_org_id oe_order_lines_all.SOLD_TO_ORG_ID%TYPE;
v_flow_status_code oe_order_lines_all.FLOW_STATUS_CODE%TYPE;
FUNCTION GET_ORACLE_ORDER(p_order_number IN OE_ORDER_HEADERS_ALL.ORDER_NUMBER%TYPE)
RETURN OE_ORDER_HEADERS_ALL%ROWTYPE IS
v_order OE_ORDER_HEADERS_ALL%ROWTYPE;
BEGIN
SELECT *
INTO v_order
FROM APPS.OE_ORDER_HEADERS_ALL
WHERE ORDER_NUMBER = p_order_number;
RETURN v_order;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_ORACLE_ORDER;
FUNCTION GET_APEX_ORDER(p_order_id IN TEK_APEX.TEK_ORD_SALES_ORDERS.ORDER_ID%TYPE)
RETURN TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE IS
v_order TEK_APEX.TEK_ORD_SALES_ORDERS%ROWTYPE;
BEGIN
SELECT *
INTO v_order
FROM TEK_APEX.TEK_ORD_SALES_ORDERS
WHERE ORDER_ID = p_order_id;
RETURN v_order;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_APEX_ORDER;
FUNCTION GET_SOURCE_ID(p_source_name IN VARCHAR2)
RETURN OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE IS
v_source_id OE_ORDER_SOURCES.ORDER_SOURCE_ID%TYPE;
BEGIN
SELECT ORDER_SOURCE_ID
INTO v_source_id
FROM APPS.OE_ORDER_SOURCES
WHERE NAME = p_source_name;
RETURN v_source_id;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_SOURCE_ID;
FUNCTION GET_ITEM_ID(p_part_number IN VARCHAR2, p_org_id IN NUMBER)
RETURN MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE IS
v_item_id MTL_SYSTEM_ITEMS.INVENTORY_ITEM_ID%TYPE;
BEGIN
SELECT INVENTORY_ITEM_ID
INTO v_item_id
FROM APPS.MTL_SYSTEM_ITEMS
WHERE SEGMENT1 = p_part_number
AND ORGANIZATION_ID = p_org_id;
RETURN v_item_id;
EXCEPTION
WHEN OTHERS THEN
RETURN NULL;
END GET_ITEM_ID;
BEGIN
apps.mo_global.set_policy_context('S',3);
apps.mo_global.init('XXTEK');
BEGIN
SELECT USER_ID
INTO v_user_id
FROM APPS.FND_USER
WHERE USER_NAME = 'SYSADMIN';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting user');
END;
BEGIN
SELECT RESPONSIBILITY_ID, APPLICATION_ID
INTO v_resp_id, v_app_id
FROM TEK_APEX.TEK_RR_ACTIVE_RESP_VW
WHERE UPPER(RESPONSIBILITY_NAME) = 'ORDER MANAGEMENT SUPER USER';
--Set current user information
fnd_global.apps_initialize (user_id => v_user_id
,resp_id => v_resp_id
,resp_appl_id => v_app_id);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting responsibility');
END;
--Get the order information from Oracle and APEX
v_apex_order := GET_APEX_ORDER(p_order_id);
IF v_apex_order.ORDER_ID IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'APEX Order ID is invalid: ' || p_order_id);
END IF;
v_oracle_order := GET_ORACLE_ORDER(TO_NUMBER(v_apex_order.ORDER_NUMBER));
IF v_oracle_order.ORDER_NUMBER IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Order Number not found in Oracle: ' || v_apex_order.ORDER_NUMBER);
END IF;
apps.mo_global.set_policy_context('S', v_oracle_order.ORG_ID);
v_source_id := GET_SOURCE_ID('IMPORT');
IF v_source_id IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Source ID not found for IMPORT');
END IF;
/* ********** Gather Order Header********** */
/* ********** Info. ********** */
OE_Order_Pub.Get_Order(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_TRUE,
p_return_values => FND_API.G_TRUE,
x_return_status => l_ret_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
p_header_id => v_oracle_order.HEADER_ID,
p_header => NULL,
x_header_rec => l_header_rec,
x_header_val_rec => l_header_val_rec,
x_Header_Adj_tbl => l_Header_Adj_tab,
x_Header_Adj_val_tbl => l_Header_Adj_val_tab,
x_Header_price_Att_tbl => l_Header_price_Att_tab,
x_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
x_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
x_Header_Scredit_tbl => l_Header_Scredit_tab,
x_Header_Scredit_val_tbl=> l_Header_Scredit_val_tab,
x_line_tbl => l_line_tab,
x_line_val_tbl => l_line_val_tab,
x_Line_Adj_tbl => l_Line_Adj_tab,
x_Line_Adj_val_tbl => l_Line_Adj_val_tab,
x_Line_price_Att_tbl => l_Line_price_Att_tab,
x_Line_Adj_Att_tbl => l_Line_Adj_Att_tab,
x_Line_Adj_Assoc_tbl => l_Line_Adj_Assoc_tab,
x_Line_Scredit_tbl => l_Line_Scredit_tab,
x_Line_Scredit_val_tbl => l_Line_Scredit_val_tab,
x_Lot_Serial_tbl => l_Lot_Serial_tab,
x_Lot_Serial_val_tbl => l_Lot_Serial_val_tab);
--Save defaults from first line
IF l_line_tab.EXISTS(1) THEN
v_contact_id := l_line_tab(1).SHIP_TO_CONTACT_ID;
v_invoice_to_org_id := l_line_tab(1).INVOICE_TO_ORG_ID;
v_ship_to_org_id := l_line_tab(1).SHIP_TO_ORG_ID;
v_sold_to_org_id := l_line_tab(1).SOLD_TO_ORG_ID;
v_flow_status_code := l_line_tab(1).FLOW_STATUS_CODE;
END IF;
--Clear out the line array before adding any new parts
FOR i IN l_line_tab.FIRST..l_line_tab.LAST LOOP
l_line_tab.DELETE(i);
l_line_val_tab.DELETE(i);
l_line_adj_tab.DELETE(i);
l_line_adj_val_tab.DELETE(i);
l_line_price_att_tab.DELETE(i);
l_line_adj_att_tab.DELETE(i);
l_line_adj_assoc_tab.DELETE(i);
l_line_scredit_tab.DELETE(i);
l_line_scredit_val_tab.DELETE(i);
l_lot_serial_tab.DELETE(i);
l_lot_serial_val_tab.DELETE(i);
END LOOP;
/* ********** Gather Order Lines ********** */
OPEN c_order_parts;
FETCH c_order_parts BULK COLLECT INTO v_order_parts;
CLOSE c_order_parts;
FOR i IN v_order_parts.FIRST..v_order_parts.LAST LOOP
v_item_id := GET_ITEM_ID(v_order_parts(i).PART_NUMBER, v_oracle_order.SHIP_FROM_ORG_ID);
IF v_item_id IS NULL THEN
RAISE_APPLICATION_ERROR(-20001, 'Error selecting part number ' || v_order_parts(i).PART_NUMBER);
END IF;
--Clear line first
l_line_tab(i) := OE_Order_Pub.G_Miss_Line_Rec;
l_line_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_VAL_REC;
l_line_adj_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_REC;
l_line_adj_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_VAL_REC;
l_line_price_att_tab(i) := OE_ORDER_PUB.G_MISS_LINE_PRICE_ATT_REC ;
l_line_adj_att_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_ATT_REC;
l_line_adj_assoc_tab(i) := OE_ORDER_PUB.G_MISS_LINE_ADJ_ASSOC_REC;
l_line_scredit_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_REC;
l_line_scredit_val_tab(i) := OE_ORDER_PUB.G_MISS_LINE_SCREDIT_VAL_REC;
l_lot_serial_tab(i) := OE_ORDER_PUB.G_MISS_LOT_SERIAL_REC;
l_lot_serial_val_tab(i) := OE_ORDER_PUB.G_MISS_LOT_SERIAL_VAL_REC;
--Set line information
l_line_tab(i).PRICE_LIST_ID := v_oracle_order.PRICE_LIST_ID;
l_line_tab(i).header_id := v_oracle_order.header_id;
l_line_tab(i).inventory_item_id := v_item_id;
l_line_tab(i).ordered_quantity := v_order_parts(i).QUANTITY;
l_line_tab(i).operation := l_op_code;
l_line_tab(i).unit_list_price := 0;
l_line_tab(i).ship_from_org_id := v_oracle_order.ship_from_org_id;
l_line_tab(i).program_id := fnd_global.conc_program_id ;
l_line_tab(i).program_application_id := fnd_global.PROG_APPL_ID;
l_line_tab(i).order_source_id := v_source_id;
l_line_tab(i).calculate_price_flag := 'N' ;
l_line_tab(i).unit_selling_price := 0.00 ;
l_line_tab(i).request_date := v_apex_order.onsite_date;
l_line_tab(i).Schedule_ship_date := v_apex_order.onsite_date;
l_line_tab(i).promise_date := null;
l_line_tab(i).invoice_to_org_id := v_invoice_to_org_id;
l_line_tab(i).ship_to_org_id := v_ship_to_org_id;
l_line_tab(i).sold_to_org_id := v_sold_to_org_id;
l_line_tab(i).ship_to_contact_id := v_contact_id;
END LOOP;
--OE_DEBUG_PUB.DEBUG_ON;
--OE_DEBUG_PUB.Initialize;
--OE_DEBUG_PUB.SetDebugLevel(5);
--Add lines to order
OE_Order_Pub.Process_order(p_api_version_number => 1.0,
p_init_msg_list => FND_API.G_TRUE,
p_return_values => FND_API.G_TRUE,
p_action_commit => FND_API.G_FALSE,
x_return_status => l_ret_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
p_header_rec => l_header_rec,
p_old_header_rec => l_header_rec,
p_header_val_rec => l_header_val_rec,
p_old_header_val_rec => l_header_val_rec,
p_Header_Adj_tbl => l_Header_Adj_tab,
p_old_Header_Adj_tbl => l_Header_Adj_tab,
p_Header_Adj_val_tbl => l_Header_Adj_val_tab,
p_old_Header_Adj_val_tbl => l_Header_Adj_val_tab,
p_Header_price_Att_tbl => l_Header_price_Att_tab,
p_old_Header_Price_Att_tbl => l_Header_price_Att_tab,
p_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
p_old_Header_Adj_Att_tbl => l_Header_Adj_Att_tab,
p_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
p_old_Header_Adj_Assoc_tbl => l_Header_Adj_Assoc_tab,
p_Header_Scredit_tbl => l_Header_Scredit_tab,
p_old_Header_Scredit_tbl => l_Header_Scredit_tab,
p_Header_Scredit_val_tbl => l_Header_Scredit_val_tab,
p_old_Header_Scredit_val_tbl => l_Header_Scredit_val_tab,
p_line_tbl => l_line_tab,
p_line_val_tbl => l_line_val_tab,
p_Line_Adj_tbl => l_line_adj_tab,
p_Line_Adj_val_tbl => l_line_adj_val_tab,
p_Line_price_Att_tbl => l_line_price_att_tab,
p_Line_Adj_Att_tbl => l_line_adj_att_tab,
p_Line_Adj_Assoc_tbl => l_line_adj_assoc_tab,
p_Line_Scredit_tbl => l_line_scredit_tab,
p_Line_Scredit_val_tbl => l_line_scredit_val_tab,
p_Lot_Serial_tbl => l_lot_serial_tab,
p_Lot_Serial_val_tbl => l_lot_serial_val_tab,
p_action_request_tbl => OE_ORDER_PUB.G_MISS_REQUEST_TBL,
x_header_rec => p_header_rec,
x_header_val_rec => p_header_val_rec,
x_Header_Adj_tbl => p_Header_Adj_tab,
x_Header_Adj_val_tbl => p_Header_Adj_val_tab,
x_Header_price_Att_tbl => p_Header_price_Att_tab,
x_Header_Adj_Att_tbl => p_Header_Adj_Att_tab,
x_Header_Adj_Assoc_tbl => p_Header_Adj_Assoc_tab,
x_Header_Scredit_tbl => p_Header_Scredit_tab,
x_Header_Scredit_val_tbl => p_Header_Scredit_val_tab,
x_line_tbl => p_line_tab,
x_line_val_tbl => p_line_val_tab,
x_line_adj_tbl => p_line_adj_tab,
x_line_adj_val_tbl => p_line_adj_val_tab,
x_line_price_att_tbl => p_line_price_att_tab,
x_line_adj_att_tbl => p_line_adj_att_tab,
x_line_adj_assoc_tbl => p_line_adj_assoc_tab,
x_line_scredit_tbl => p_line_scredit_tab,
x_line_scredit_val_tbl => p_line_scredit_val_tab,
x_lot_serial_tbl => p_lot_serial_tab,
x_lot_serial_val_tbl => p_lot_serial_val_tab,
x_action_request_tbl => p_action_request_tab);
-- OE_DEBUG_PUB.DEBUG_OFF;
p_return_code := l_ret_status;
IF l_ret_status != 'S' THEN
DBMS_OUTPUT.PUT_LINE(l_msg_data);
IF l_msg_count = 1 THEN
p_status := OE_Msg_Pub.Get(1,'F');
ELSE
FOR i IN 1..l_msg_count LOOP
p_status := OE_Msg_Pub.Get(i,'F') || '<br />';
END LOOP;
END IF;
p_status := 'Error loading lines<br>' || p_status;
ELSE
p_status := 'Order Processed Successfully<br>' || v_order_parts.COUNT || ' Line(s) Loaded';
END IF;
-- WHILE OE_DEBUG_PUB.G_DEBUG_INDEX < OE_DEBUG_PUB.CountDebug LOOP
-- OE_DEBUG_PUB.GetNext(v_debug);
-- DBMS_OUTPUT.PUT_LINE(v_debug);
-- END LOOP;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
RAISE;
END TEK_ORD_PROCESS_ORDER;Thanks!
Jonathan HartHello,
Try the following
1) Check if any processing constraints are applied to customer/location
2) Try to create a new customer and associate internal location.
Create a new order to reproduce the issue
Thanks
-Arif -
Error in Writing to File \Winnt\System32\mfcans32.dll
Error window with msg "Error in Writing to File \Winnt\System32\mfcans32.dll" is being popuped while trying to install 9.0.3 on windows 2000 Advanced Server.
My System Configuration Details are as follows.
Compaq Proliant
Ram : 2GB
HARD DISK : 80GB
PROCESSOR : 2.6
Please help me to install.
Thanks,
Srinivas Chowdhary Annamareddy.You might want to investigate why it became Read-Only in the first place and are there any other files that should not be Read-Only read only.
-
Order Import - Validation failed for the field - End Customer Location
I am trying to import an order using standard import program and it is failing with below error:
- Validation failed for the field - End Customer Location
I have checked metalink to debug this and found nothing, the values i have used to populate the interface table or valid.
Can someone please post your views on this, on where the problem might be.
Thanks!Hello,
Try the following
1) Check if any processing constraints are applied to customer/location
2) Try to create a new customer and associate internal location.
Create a new order to reproduce the issue
Thanks
-Arif -
Save validation failed for message
Hi !
I am trying to save a workflow to the database however I am getting an error saying 'Save validation failed for message 'WFTEST/COMPLAINT_REJECTED'
underthis i got
401: Could not find token 'NOTE' among message attributes
401: Could not find token 'FORWARD_TO_USERNAME' among message attributes'
What must I do to stop getting this error message.Hi,
I've answered your duplicate post on the [WorkflowFAQ forum|http://smforum.workflowfaq.com/index.php?topic=998.0].
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
Payload Validation failing for EBM
Hi,
I have a composite which takes input based on a simple XSD.
Inside the composite the input is mapped to Sales Order EBM and this EBM is sent as input to other composite.
For data validation purpose, I switched on Payload Validation for this composite in Weblogic EM.
The input data validation works fine but it's throwing follwing error while invoking composite which accepts EBM as input.
<fault>
<bpelFault>
<faultType>0</faultType>
<remoteFault>
<part name="summary">
<summary>oracle.fabric.common.FabricInvocationException: Schema validation failed for message part payload. Please ensure at the message sender level that the data sent is schema compliant.</summary>
</part>
<part name="detail">
<detail>Element 'ProcessSalesOrderFulfillment' not expected.</detail>
</part>
<part name="code">
<code>null</code>
</part>
</remoteFault>
</bpelFault>
</fault>
The payload validation error is occuring for all composites which accepts EBM as input. It picks the attribute name just after the header and says element not expected.
Any help is greatly appreciated.
Thanks,
RaviPlease ensure that you have created EBS properly, verify all the datatypes of the elements in input XSD & EBO schema. And also verify whether EBM header is reflecting properly.
One more thing you should able to navigate from EBS to EBM, EBM to EBO then only you can assume you have done all things correctly. If not reconstruct EBS, EBM & EBO with valid request & response messages. -
WINNT\system32\msvcp60.dll
Hi,
I am trying to install IDES4.7 on win2kserver on oracle.
i am trying to apply NT patch when i execute RDDLLINS it is giving the following error screen:
In order to ensure SAP R/2 working correctly some shared file required an update. setup will update the following files and reboot the system if necessary.
In the window it shows this file.
c:\WINNT\system32\msvcp60.dll
But when i click on Ok nothing is happening.
can anybody please tell me what should i do.
It worked well on XP pro. but 2k server is giving me troubles.
Thanks in advance.
Madhuthe windows does not indicate an error it is information only what will happen after pressing ok.
>>It worked well on XP pro. but 2k server is giving me troubles.
what kind of troubles?
it may happen that on XP you already have installed the DLL in an actual version. therefore it is not necessary to replace/install. This may be different on w2k.
regards
Peter -
Order Import Failed in OM : Log Validation failed for the field - Ship To
Problem in Order Management
When i tried to do Order import in Source Org logfiles shows the Message :Validation failed for the field - Ship To, Please if anyone have a solution of this.
Thanks in advance.
Regards,
Rajesh Verma
Senior Consultant- Oracle Apps.
COLTperhaps you might want to try populating customer_id instead of name to make sure that there is no error on typing customer name.
primary ship-to and bill-to must exist under this customer. During order import, if ship-to is not specified then import will fetch primary ST of customer.
This is what we use to populate interface table -with mininum of data.
INSERT INTO oe_headers_iface_all
(orig_sys_document_ref,order_source_id,org_id
,order_type_id,payment_term_id, shipping_method_code, freight_terms_code
,customer_po_number,salesrep_id
,sold_to_org_id, ship_to_org_id,invoice_to_org_id,sold_to_contact_id
,booked_flag
,created_by, creation_date, last_updated_by, last_update_date,last_update_login
,operation_code, order_category
,attribute5,tp_attribute4,xml_message_id,xml_transaction_type_code
,request_id, error_flag)
INSERT INTO oe_lines_iface_all
(order_source_id, orig_sys_document_ref, orig_sys_line_ref,orig_sys_shipment_ref
,inventory_item,item_type_code,line_type_id
,top_model_line_ref,link_to_line_ref,component_sequence_id,component_code,option_flag
,ordered_quantity
,order_quantity_uom,salesrep_id
,created_by, creation_date, last_updated_by, last_update_date,last_update_login
,operation_code,cust_model_serial_number,line_category_code
,context,attribute6
,reference_type, reference_line_id, reference_header_id
,return_context, return_attribute1, return_attribute2
,return_reason_code
,tp_attribute1,tp_attribute2,tp_attribute3,tp_attribute4,tp_attribute5
,request_id,error_flag) -
Validation failed for the field - Bill To Contact, Ship To Contact
Hi,
When I am trying to Import / enter order for a specific customer, i am getting the error.
VALIDATION FAILED FOR THE FIELD - BILL TO CONTACT
VALIDATION FAILED FOR THE FIELD - SHIP TO CONTACT
Has anyone got this error earlier? If you know the resolution, please update me on this.Hi,
I am getting following error when I an adding one customer address to another customer through Order Import Program. By populating 3 table values
1. OE_CUSTOMER_INFO_IFACE_ALL
2. OE_HEADERS_IFACE_ALL
3. OE_LINES_IFACE_ALL
Error Message:
Duplicate SHIP_TO ADDRESS found for IC_804810. Please correct the data.
Duplicate BILL_TO ADDRESS found for IC_804810. Please correct the data.
But its working fine when I am giving New address for existing customer.
Please help me on this....
Thanks,
Oracle Support. -
I have published via iWeb for some time, but after I created a new webpage, I have been unable to publish again. This is the latest error message...
".Mac account credentials validation failed for account “account name."
I have tried publishing via wireless internet and direct connect to router, with the same results. The apple support site recommendation is to upgrade to iWeb 1.1.1 or higher, but I'm already running 1.1.2.
Thanks!
CraigI have this same problem SUDDENLY. I never have had issues before.I have not tried to publish since 10/04 so I don't know when this started...? what is the answer. My .mac account is fine and working.
-
Catalog object privilege validation failed for user.
Hi,
I'm getting following error after adding the HTML tags in dashboard 11g.
How to set the privileges?..Kindly let me know.Thank you.
Error Massage:
Catalog object privilege validation failed for user to path /users/User1/_portal/page 1.
You do not currently have sufficient privileges to save a report or dashboard page that contains HTML markup. Dashboard contains custom HTML tags as part of static text.Hi User,
Go to Settings -> Administrators -> Manage Privileges -> 'Answers'
Here you can view - "Save Content with HTML Markup" next to it you will see 'Presentation Server Administrators'
Click it and Change for 'Everyone'
And, Save changes. Restart BI Services now you can add the contents and it will not popup any error messages.
Thank you.
Award Points and Close the Post as Answered to help others with same issue :) -
Validation failed for ArchiveClassLoaderDerivedType- Java callouts from OSB
Even though jar file for java classes are present, I am receiving the following error sometimes:
com.bea.wli.config.component.NotFoundException: Validation failed for ArchiveClassLoaderDerivedType ..Referenced component (ArchiveClassLoaderDerivedType ../../Java/.._ArchiveClassLoaderDerivedType) not found.
When I bounce the server then it works, but I can't bounce the server in production. Do anybody know why this is happening?Unfortunately ALSB/OSB does not seem to honour JAR files packaged in your JAR and referenced by the manifest Class-Path attribute. As well, the JAR files deployed into a project cannot reference each other. As such, you either have to open the library JAR and stick it into the one you are deploying or to put it on the server classpath via the domain lib (you do not need to edit the start scripts). This is definitely a hole in the capabilities of OSB.
Maybe you are looking for
-
What is the difference of 3 endpoints of ES in Service Registry
When I search the enterprise service in service registry of PI in the discovery system, I found the enterprise service and select the endpoint view, there are 3 endpoints, such as Binding_T_HTTP_A_HTTP... , and Binding_T_HTTPS_A_HTTPS..., and Materi
-
How do I localize Flash CS5.5 iOS app to one language
What method or process do I use to set an iOS app to only one language? I recently had an iPad app written in Flash CS5.5 approved at the iTunes app store. I noticed at the iTunes store, it indicates that my app is localized in 14 different languages
-
Everytime I click on the menu to login to my school portal, it opens the drop down menu but it never loads the actual tab I'm clicking on. I don't know if that's because of settings or what it is but I've tried everything possible. I also noticed the
-
DI API - Retrieve specific message object when you already have the code?
The MessagesService object lets you retrieve a message using the message header. It also lets you retrieve a list of message headers from the inbox or sent mail. Unfortunately, I don't see any way to create a single message header if I already know t
-
I am having trouble printing to a non PS printer from illustrator - Ricoh SG 3110.
I have tried Adobe Illustrator CS 5 -6 and now have a Trail version of CC and everything still prints the same. I have an IMAC OSX 10.9 I can rasterize the artwork at 600 dpi and it prints OK, but will not print through any setting I have selected.