Validation failed for C:\WINDOWS\system32\VSINT.dll. You probable are missing a necessary root certificate

when right clicking mouse on folder or icon

Probably it is a Zone Alarm error. Do you have it? Deactivate it and try again.
thank you

Similar Messages

Validation Failed for C:\winnt\system32\vsinit.dll

I am running VPN Client 4.6.00.0045 on Windows 2000 and when I reboot I get the an error that reads "Validation Failed for C:\winnt\system32\vsinit.dll"
It seems the VPN Service is not starting. A reinstall will not fix it. I do not have ZoneAlarm or any other personal firewall installed. Any help would be appreciated.

I'm not sure if the steps described at this URL will help your issue or not. There is quite a bit of information in the post that may be of some help.
http://forum.zonelabs.org/zonelabs/board/message?board.id=Off-Topic&message.id=5155
On my system, I do not have ZoneAlarm and installed at all and I have the vsinit.dll file on my system. I suspect that it is installed with the Cisco VPN Client. There is reference to this file in bug CSCec41278 that leads me to this conclusion. The version of the VPN client that I have installed is 4.6.00.0049.
HTH
Steve

Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed

This error is occurring on my Windows Server 2008R2 server with SQL 2008R2 installed. I have found lots of "help" but none of it works...
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.
The "help" I have found...
http://technet.microsoft.com/en-us/library/cc774913(WS.10).aspx
http://support.microsoft.com/kb/300956

I was able to re-install BITS. The BITS error seems to have gone away, but this error is now showing...
The object length of an object returned by Extensible Counter DLL "C:\Windows\system32\wbem\wmiaprpl.dll" for the "WmiApRpl" service was not correct. The sum of the object lengths returned did not match the size of the buffer returned. The performance
data returned by the counter DLL will not be returned in the Perf Data Block. The first four bytes (DWORD) of the Data section contains the count of objects.
Help?

The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed. WDS not PXE booting!

This morning came in to find clients were not getting there bootfiles through PXE. I checked the logs to find the following events related to WDS.
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Has anyone seen this or have a link to a resolution?
tconners

Hotfix loaded but didn't help.
Found a few articles referring to rebuilding the perf counter library. I ran "lodctr /R" failed first time then worked the second time. I believe the errors:
The Open Procedure for service "WDSTFTP" in DLL "C:\Windows\system32\wdstftp.dll" failed
The Open Procedure for service "WDSServer" in DLL "C:\Windows\system32\wdssrv.dll" failed
The Open Procedure for service "WDSMC" in DLL "C:\Windows\system32\wdsmc.dll" failed
Are gone but PXE boot still fails.
Do you think I might have to uninstall WDS and reinstall? "Using SCCM console to just remove PXE"
tconners

C:\Windows\system32\bitsperf.dll" failed

Log Name: Application
Source: Microsoft-Windows-Perflib
Date: 10/23/2013 4:36:55 AM
Event ID: 1008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxxxxxxxx
Description:
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Perflib" Guid="{13B197BD-7CEE-4B4E-8DD0-59314CE374CE}" EventSourceName="Perflib" />
<EventID Qualifiers="49152">1008</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-10-23T02:36:55.000Z" />
<EventRecordID>355461</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>SWAMR0041.INDUSTRIE.AMMANN.INTRA</Computer>
<Security />
</System>
<UserData>
<EventXML xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="Perflib">
<param1>BITS</param1>
<param2>C:\Windows\system32\bitsperf.dll</param2>
<binaryDataSize>8</binaryDataSize>
<binaryData>0200000000000000</binaryData>
</EventXML>
</UserData>
</Event>
Tried to rebuild the counters
1. lodctr bitsperf.dll
2. lodctr \R
3. lodctr /e:bitsperf.dll
After performing the above still getting the issue.
Microsoft Provided steps are confusing.
Can any one provide me the detailed steps to resolve the issue ?
Shashidhar N Bharadwaj

I actually ran into this issue myself and I found this to be my fix.
"Unable to add these counters:
\Memory\Available MBytes
\Memory\% Committed Bytes In Use
\Memory\Cache Faults/sec
\Memory\Cache Faults/sec
\PhysicalDisk(*)\%Idle Time
\PhysicalDisk(*)\Avg. Disk Queue Length
\Network Interface(*)\Bytes Total/sec"
after that I checked my Test Server and saw the same error in Windows Server 2012. I searched and found a lot of info
about this error in earlier version of Windows but not for Server 2012 and therefore decided to write a wiki about it. It is my first English wiki and I want to write this wiki for other people who may have similar problem because Ed Price suggested us:
Below are some steps to be followed.
Steps:
We have to rebuild Performance Counters with LODCTR from an elevated command prompt.
1. Launch Command Prompt as Administrator (right click Runs As Administrator).
2. Drop into the C:\WINDOWS\System32 directory by typing CD\ then CD Windows\System32
3. To rebuild your resource counters type the following command:
lodctr /r
This will rebuild your counter values and may take a few moments so please be patient.
4. If you wish to query the counters to make sure they were correctly set, use:
lodctr /q
This will give you something like the following:
Performance Counter ID Queries [PERFLIB]:
    Base Index: 0x00000737 (1847)
    Last Counter Text ID: 0x000031D2 (12754)
    Last Help Text ID: 0x000031D3 (12755)
[.NET CLR Data] Performance Counters (Enabled)
    DLL Name: %systemroot%\system32\netfxperf.dll
    Open Procedure: OpenPerformanceData
    Collect Procedure: CollectPerformanceData
    Close Procedure: ClosePerformanceData
[.NET CLR Networking] Performance Counters (Enabled)
    DLL Name: %systemroot%\system32\netfxperf.dll
    Open Procedure: OpenPerformanceData
    Collect Procedure: CollectPerformanceData
    Close Procedure: ClosePerformanceData
and etc
5.Now reopen the Performance Monitor and check it. You will see that the error was fixed.
Note 1:
In the query if you have provider name that is Disabled, Use this Cmdlet to enable it.
lodctr /e:<provider name>
for example (think in above query Performance Counters is disable ) :
lodctr /e:Performance Counters
Note 2:
If you perform this step and it doesn't work, please see the event log and search for if there is Event ID = 3006 in it? if yes,
please go to registry and change Disable Performance Counters from "1" to "0".
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib
Hope this is helpful.

Faulting application name: w3wp.exe - and Faulting module path: C:\Windows\system32\KERNELBASE.dll

The environment is aSharepoint2010 and ProjectServer2010we hadlast nighta crach ofapplication poolwithan error on thew3wpandkernelbase.
We canrevivetheappbutthe firstaccess to the sitewe have thew3wpcrash.
we did adumpand here are thedetails.
Information 12/08/2014 15:28:45 Windows Error Reporting 1001 None
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: w3wp.exe
P2: 7.5.7601.17514
P3: 4ce7afa2
P4: KERNELBASE.dll
P5: 6.1.7601.18409
P6: 5315a05a
P7: c06d007e
P8: 000000000000940d
P9:
P10:
Attached files:
These files may be available here:
Analysis symbol:
Rechecking for solution: 0
Report Id: 9561bd5d-2224-11e4-9566-0050569a0110
Report Status: 0
Error 12/08/2014 15:28:46 Application Error 1000 (100)
Faulting application name: w3wp.exe, version: 7.5.7601.17514, time stamp:
0x4ce7afa2
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x5315a05a
Exception code: 0xc06d007e
Fault offset: 0x000000000000940d
Faulting process id: 0x15d0
Faulting application start time: 0x01cfb6315831ebbb
Faulting application path: c:\windows\system32\inetsrv\w3wp.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 95eaafc7-2224-11e4-9566-0050569a0110
Warning 12/08/2014 15:28:51 WAS 5011 None
A process serving application pool 'SharePoint Central Administration v4'
suffered a fatal communication error with the Windows Process Activation
Service. The process id was '2448'. The data field contains the error number
Error 12/08/2014 15:28:51 WAS 5002 None
Application pool 'SharePoint Central Administration v4' is being automatically
disabled due to a series of failures in the process(es) serving that
application pool.
Le dump du crach donne les informations suivantes
(990.fb4): Unknown exception - code c06d007e (first/second chance not
available)
KERNELBASE!RaiseException+0x39:
000007fe`fda5940d 4881c4c8000000 add rsp,0C8h
0:004> .loadby sos clr
Unable to find module 'clr'
0:004> .loadby sos clr
Unable to find module 'clr'
0:004> !analyze -v
* Exception Analysis *
GetPageUrlData failed, server returned HTTP status 404
URL requested:
http://watson.microsoft.com/StageOne/w3wp_exe/7_5_7601_17514/4ce7afa2/KERNELBASE_dll/6_1_7601_18409/5315a05a/c06d007e/0000940d.htm?Retriage=1
FAULTING_IP:
KERNELBASE!RaiseException+39
000007fe`fda5940d 4881c4c8000000 add rsp,0C8h
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 000007fefda5940d (KERNELBASE!RaiseException+0x0000000000000039)
ExceptionCode: c06d007e
ExceptionFlags: 00000000
NumberParameters: 1
Parameter[0]: 000000000092e820
DEFAULT_BUCKET_ID: APPLICATION_FAULT
PROCESS_NAME: w3wp.exe
ERROR_CODE: (NTSTATUS) 0xc06d007e -
<unable code="" error="" get="" text="" to="">
EXCEPTION_CODE: (NTSTATUS) 0xc06d007e -
<unable code="" error="" get="" text="" to="">
EXCEPTION_PARAMETER1: 000000000092e820
MOD_LIST:
<analysis>
NTGLOBALFLAG: 0
APPLICATION_VERIFIER_FLAGS: 0
MANAGED_STACK: !dumpstack -EE
OS Thread Id: 0xfb4 (4)
Child-SP RetAddr Call Site
FAULTING_THREAD: 0000000000000fb4
PRIMARY_PROBLEM_CLASS: APPLICATION_FAULT
BUGCHECK_STR: APPLICATION_FAULT_APPLICATION_FAULT
LAST_CONTROL_TRANSFER: from 000007fee99ed41d to 000007fefda5940d
STACK_TEXT:
00000000`0092e730 000007fe`e99ed41d : 00000000`00000000 00000000`00000000
00000000`00000391 000007fe`e9b40cd0 : KERNELBASE!RaiseException+0x39
00000000`0092e800 000007fe`e996d57f : 000007fe`e9c78e70 00000000`0092e820
00000000`00000000 00000000`00000000 : OWSSVR!DllCanUnloadNow+0x8cfad
00000000`0092e8b0 000007fe`e96c5244 : 00000000`0000000d 00000000`010dd4f0
0000000f`001d000b 00000010`001a000c : OWSSVR!DllCanUnloadNow+0xd10f
00000000`0092e920 000007fe`e96c5313 : 00000000`00000000 00000000`00328ad0
00000000`778d4564 000007fe`e9c78e28 : OWSSVR!TerminateExtension+0x158
00000000`0092eaa0 000007fe`e96c5379 : 00000000`0128fcd0 00000000`000000a4
00000000`00000024 000007fe`faf11827 : OWSSVR!TerminateExtension+0x227
00000000`0092ebf0 000007fe`e96c18d8 : 00000000`00000000 00000000`00000000
00000000`01290840 00000000`00000021 : OWSSVR!TerminateExtension+0x28d
00000000`0092ec20 000007fe`cf5cf94a : 00000000`00000000 00000000`01290840
00000000`01290840 00000000`0128f800 : OWSSVR!RegisterModule+0x1c
00000000`0092ec50 000007fe`cf5d9aa4 : 00000000`00000000 00000000`00000000
00000000`00000000 00000000`00000000 : iiscore!VIRTUAL_MODULE::RegisterModule+0x2a
00000000`0092ec80 000007fe`cf5daeeb : 00000000`00000078 000007fe`cf5ba944
00000000`0128f800 000007fe`cf5e87b8 :
iiscore!W3_SERVER::LoadModulesFromConfig+0x394
00000000`0092eda0 000007fe`cf5dc2ff : 00000000`0128f800 000007fe`cf5e87b8
00000000`00000000 00000000`0121fb10 :
iiscore!W3_SERVER::InitializeGlobalModules+0x3b
00000000`0092ede0 000007fe`cf5e234d : 00000000`0128f800 00000000`00000002
00000000`0121fb10 00000000`0000017c : iiscore!W3_SERVER::Initialize+0xaaf
00000000`0092f040 000007fe`cf5e2405 : 00000000`0128f6b0 00000000`00000000
00000000`00000000 00000000`0000000c :
iiscore!IISCORE_PROTOCOL_MANAGER::InitializeGlobals+0x1fd
00000000`0092f2e0 000007fe`e27a9316 : 00000000`00000000 00000000`00000000
00000000`005fa7e0 00000000`00000000 :
iiscore!IISCORE_PROTOCOL_MANAGER::PreloadApplication+0x45
00000000`0092f320 000007fe`e27a7dd2 : 00000000`005ff4b0 00000000`77997ef5
00000000`0128f6b0 00000000`0021f070 :
w3wphost!WP_IPM::HandlePreloadApplications+0xc2
00000000`0092f370 000007fe`faf141f3 : 00000000`005ff508 00000000`00000000
00000000`00000000 00000000`00000000 : w3wphost!WP_IPM::AcceptMessage+0x16e
00000000`0092f3b0 00000000`77bbc251 : 00000000`00000000 00000000`003b3bf0
00000000`00000000 00000000`0000000c : iisutil!IPM_MESSAGE_PIPE::MessagePipeCompletion+0x44f
00000000`0092f430 00000000`77bc658c : 00000000`003b3b40 00000000`003693f0
00000000`0092f5e8 00000000`00000000 : ntdll!RtlpTpWaitCallback+0x92
00000000`0092f480 00000000`77bd0c56 : 00000000`0035d110 00000000`77cb45e8 00000000`00000000
00000000`77cb4610 : ntdll!TppWaitpExecuteCallback+0x10c
00000000`0092f4e0 00000000`779a59ed : 00000000`00000000 00000000`00000000
00000000`00000000 00000000`00000000 : ntdll!TppWorkerThread+0x5ff
00000000`0092f7e0 00000000`77bdc541 : 00000000`00000000 00000000`00000000
00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0xd
00000000`0092f810 00000000`00000000 : 00000000`00000000 00000000`00000000
00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x1d
STACK_COMMAND: ~4s; .ecxr ; kb
FOLLOWUP_IP:
OWSSVR!DllCanUnloadNow+8cfad
000007fe`e99ed41d 488b442458 mov rax,qword ptr [rsp+58h]
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: owssvr!DllCanUnloadNow+8cfad
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: OWSSVR
IMAGE_NAME: OWSSVR.DLL
DEBUG_FLR_IMAGE_TIMESTAMP: 51c91cf5
FAILURE_BUCKET_ID: APPLICATION_FAULT_c06d007e_OWSSVR.DLL!DllCanUnloadNow
BUCKET_ID: X64_APPLICATION_FAULT_APPLICATION_FAULT_owssvr!DllCanUnloadNow+8cfad
WATSON_STAGEONE_URL:
http://watson.microsoft.com/StageOne/w3wp_exe/7_5_7601_17514/4ce7afa2/KERNELBASE_dll/6_1_7601_18409/5315a05a/c06d007e/0000940d.htm?Retriage=1
Followup: MachineOwner </analysis></unable></unable>

Hello Roland_Zeki,
Can you check System in the Windows Log of Event Viewer? Maybe you have some logon failure for one of the services, like in this blog:
http://www.shareesblog.com/?p=363
- Dennis | Netherlands | Blog |
Twitter
Yes I have verify this point I suspected to be the origine of the problem. But no, the accounts have fixed password and are not locked. I test this point with a valide login on the server, and I reenter the login password for each app pool.

C/windows/system32/wmp.dll

Hello support team,
my window 7 media will not open- I tried turning feature on & off many times, I tried SFC scan, can fix the problem.
It keep saying " Wmplayer.exe bad image' 'c/windows/system32/wmp.dll ' has error ' window media player is not installed property and must be reinstall"
But I can anything on Microsoft download site that I can download. Any suggestions ?
Thank you so much for youer assistance
SAM

Hi,
First, I suggest you run a security program to scan your system to see if there is any virus may cause your issue.
Then, we can try to copy the wmp.dll from a good Windows 7 computer or installation media and manually replace to check the results: You'd better log into Safe mode to perform following steps.
1.Take administrative ownership of the corrupted system file. To do this, at an elevated command prompt, copy and then paste (or type) the following command, and then press ENTER:
takeown /f "C:\Windows\System32\wmp.dll"
2.Grant administrators full access to the corrupted system file. To do this, copy and paste (or type) the following command, and then press ENTER:
icacls "C:\Windows\System32\wmp.dll" /GRANT ADMINISTRATORS:F
3.Replace the corrupted system file with a known good copy of the file. To do this, copy and paste (or type) the following command, and then press ENTER:
Copy Source_File "C:\Windows\System32\"
Note The Source_File placeholder represents the path and file name of the known good copy of the file on your computer
If we still fail to fix this issue, I recommend your manually install WMP from a installation media:
I recommend you use following commands running as admin to reinstall Media player from a installation media:
Uninstall features:
Dism /online /Disable-Feature /FeatureName:WindowsMediaPlayer
Mount a wim file from installation media:
Dism /Mount-Image /ImageFile:C:\test\images\install.wim /index:1 /MountDir:C:\test\mount\windows
Install Windows Media player from mounted install.wim
Dism /Online /Enable-Feature /FeatureName:WindowsMediaPlayer /Source:C:\test\mount\windows /LimitAccess
Note: C:\test\mount\windows is the location you mount the install.wim from installation media
Kate Li
TechNet Community Support

TS1717 ITUNES.EXE - Bad Image. C:\Window\System32\Softpub.dll Problem

I have been having a problem getting into ITUNES. my computer is giving me a Message when i launch Itunes and says
ITUNES.EXE - Bad Image
C:\Windows\System32\Softpub.dll is either not designed to run on windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
I have tried downloading the Softpub.dll file and tried replacing it, but my computer says I am not the trusted manager (I am the Admin on this PC and dont know why I cant change it. if anyone can help that would be great. Thanks....

b noir - You are awesome! I was having the "bad image" problem with the after downloading ITunes 10. I also had a problem with a DEP error (as you know - data execution protection). I tried so many things in combination to fix these problems, I am not sure which piece of your advice finally did the trick! Regarding the bad image, I renamed the file as you recommended. I tried downloading a new softpub.dll. I didn't think I was successful, but there it was right where it was supposed to be. I used the Windows Error Checking feature (right click on C Drive, properties, tools) to clean things up. Lastly, a friend recommended using a different USB port to sync for the first time. UREKA! I can now sync. Thanks for all of your suggestions, b noir!

Windows\system32\QUARTZ.dll can't open in Windows. Can't use Premiere Elements.

I am looking for a way to get a solution to this error which keeps preventing me from opening my Premiere Elements 11 program. I have previously used the program without any problems. But last week I had a new HDD installed in my laptop (Dell Studio XPS 1640 running Windows 7 Ultimate 64-bit). Now I can't open Premiere Elements and can't edit my videos.
When I try to open the program, I get an error which reads:
Font Capture: Adobe Premiere Elements.exe - Bad Image
C:\Windows\system32\QUARTZ.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original instalation media or contact your system administrator or the software vendor for support
My computer technician did use an image of my laptop to transfer everything onto the new HDD. I have no idea if that is relevant to this software problem.
I posted this question previously and was directed to a link which instructed me to update my DirectX and other graphics drivers. I did all that already. I still can't open Premiere Elements. I want to ask Adobe Support, but since they just launched Premiere Elements 12, I guess I no longer get direct support from Adobe? Not sure but that is how it seems to work. I will try any advice given to resolve this issue, if anyone has ideas.
Thanks!
Janeen

Did you try reinstalling as indicated by the error message? Transferring images is not a good way to install Adobe programs.

Loss of WiFi and in 'Event: Module' = Path: C:\Windows\System32\IWMSSvc.dll

re: Thinkpad W540 20BG 0016US Win 7 [64] Pro (So called WORKSTATION) - What am I doing wrong?
In my event log:
WLAN Extensibility Module has stopped unexpectedly.
Module Path: C:\Windows\System32\IWMSSvc.dll
Lenovo installed Access Connection (no version number displayed on splash and no 'about'), but digging for the file, says v6.11 in c:\SWTOOLS\readyapps\accon\setup.exe
There is no quick emergency disconnect from the WiFi..... if a web site is malicious and locks you to a script..
I have no idea what is happening. No WiFi lights, No WiFi switch, Software version hidden from the user ..... On my previous Workstation I saw what was happening.
So, any hints from users that resolved this WLAN issue?

Nuke the proprietary internet handlers and let Windows deal with it.
Get Rainmeter with a network monitor to watch your bandwidth usage.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

9i install error "error writting to C:|windows\system32\mfcan32.dll"

I'm trying to install Oracle on a "brand new" computer running WIN 2003 XP Home, so I'll be ready for the fall semester.
I was installing Oracle9i DS Release 2 (9.0.2.1) and at the "Install" screen this Oracle message.
ERROR writting to C:|windows\system32\mfcan32.dll
I then "clicked" the ignore button.
Then Windows shut down oracle and restarted with this error message.
Win signatur error
BCCode : 10000050 BCP1 : DAD45CD4 BCP2 : 00000000 BCP3 : 805020A4
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 768_1
MICROSOFT's REPLY
Error Caused By A Device Dr iver
I'm just to new at this and haven't got a clue so any assistance would truely be appriciated.
Mathew

You have a basic problem: You try to install desupported software on an unsupported platform.
I assume mfcan32.dll is write-protected (maybe for good reasons), you may remove write-protection and try again, but I don't know the consequences.

Interactive Services Detection C:\Windows\system32\TSAPPCMP.DLL

I can't find anything on this. I can find a lot dealing with the spoolsv.exe, but nothing on TSAPPCMP.DLL. I am not looking for answers, I am just looking for troubleshooting methods to figure out what is going on. Any guidance would be
greatly appreciated.
Windows Server 2008 R2 Terminal Server
VMware 5.1.0
Citrix XenApp 6.0
This is what is being shown in the event viewer:
Log Name: Application
Source: Interactive Services detection
Date: 12/31/2013 8:32:58 PM
Event ID: 1000
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: TS01
Description: A device or program has requested attention. Device or application: C:\Windows\system32\TSAPPCMP.DLL. Message title: Windows Installer Coordinator.

Hi,
I would like to say that it is just a normal condition. No further action is required.
However, if you want to know details about Interactive Services Detection and event, please refer to the following articles.
What is Interactive Services Detection and Why is it Blinking at Me?
http://blogs.msdn.com/b/patricka/archive/2010/04/27/what-is-interactive-services-detection-and-why-is-it-blinking-at-me.aspx
Troubleshooting Interactive Services Detection
http://blogs.msdn.com/b/patricka/archive/2011/03/14/troubleshooting-interactive-services-detection.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Since my last windows update, whenever I open firefox I get an error message saying BAD IMAGE on the file C:\windows\system32\WRusr.dll. Can you help me?

The message I get is the following:
"C:\WINDOWS\SYSTEM32\WRusr.dll is either not designed to run on Windows or it contain an error. Try installing the program again using the original installation media or contact your administrator or the software vendor for support."
I can't open Mozilla firefox anymore. I have tried reinstalling 3 times already.

hello, the file you have referenced appears to be part of Webroot SecureAnywhere - try to remove that software in case you have it installed on your system.

Bad Image iTunes.exe c:windows/system32\d3d8thk.dll

I started to download 4.0 for iPhone and iTunes upgrade displayed, so I clicked OK. Download was successful installed no error. Clicked to open got this message:
Bad image iTunes.exe c:windows/system32\d3d8thk.dll designed not to rum on windows or it contains an error.
Uninstalled iTunes from system. New download of iTunes still get same error message.

d3d8thk.dll
You're having trouble with one of your DirectX Windows operating system files there.
Perhaps the first thing we should try with that one is an sfc /scannow, as per:
[How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7|http://support.microsoft.com/kb/929833]
Does the scannow find/repair any damage? If so, can you get iTunes to reinstall/launch now?

C:\windows\system32\d2d1.dll error. Windows 7 ultimate, can't use half of my applications.

Built a pc a while ago, ever since I installed windows 7 ultimate, a genuine copy with key. I have been getting the following
error: C:\windows\system32\d2d1.dll is either not designed to run on windows, or it contains an error.
Can anyone PLEASE help me resolve this issue, it has been driving me crazy, I can't use steam in big picture mode, use my
mouse customization software, or windows movie maker, and many more.
Or is my only option a fresh install of windows 7? Because I no longer have possession of the disc/key.
Thanks for your help.

AJ
Two things to try first
Run a system file check
Please run a system file check (SFC)
All instructions are in our Wiki article below...
Should you have any questions please ask us.
System file check (SFC) Scan and Repair System Files
Wanikiya and Dyami--Team Zigzag

Validation failed for C:\WINDOWS\system32\VSINT.dll. You probable are missing a necessary root certificate

Similar Messages

Maybe you are looking for