Validation of outbound FIle with respect to outbound Message type

Hi Experts,
   I have file system at outbound side and defined the Data Type, Message Type for this. Now a want to validate the outbound file against the Message type structure i have defined. Now if the file is not validated against Message type, i want to create the log file that will explain what were the errors in the outbound file and move the file to other archive else send it to inbound system.
Plz suggest the solution.
Thanks and regards,
Vishal

This is the best document for starting on Adapter Modules,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a">How To Create Modules for the J2EE Adapter Engine</a>
Example Adapter Module,
http://help.sap.com/saphelp_nw2004s/helpdata/en/e9/61e1407e858031e10000000a1550b0/content.htm
Regards
Bhavesh
PS : Do a search on SDN. For instance, look into the How To gudies Section on the XI home page.You will find most of the documents available here.

Similar Messages

  • Why I cannot open a restored domain.sites2 file with iweb?? Message: "

    Why I cannot open a restored domain.sites2 file with iweb?? Message: "domain.sites2 couldn't be opend"

    Please supply screen shot when it is asking for updates. (Do not send as email, use CAMERA icon). This is important, there are many fake updates.

  • Validating generated XML file with DTD

    Hello all,
    my requirement is to test the XML file with its DTD.
    we are creating an XML file, before writing it on the application server , we need to test it with its DTD.
    i found one method set_validating in the interface if_ixml_parser , for validating XML file, but not getting an idea how to use it, like how to link the DTD to XML etc.
    if i try to use the above method am getting the following error:
    Unable to retrieve the external entity 'd:\dtdfile.dtd'.
    where 'd:\dtdfile.dtd' is the path of the DTD file included in the Doctype of the XML file.
    Please help me to solve this.
    Thx in advance.

    Hello,
    Did you find your answer ?
    I know how to validate an XML file an internal DTD, but not an external one... If you know, can you pelase advice ?
    If you didn't found yet, you need to use method get_reason() to get the description of the error.
    best regards,
    Gilles.

  • How to read a file with value of RAW data type? Please help

    Hi Experts,
       I  have a file with RAW data like DE864E48833BFFF1B805001CC4EF4BFA
       I am using GUI_UPLOAD.
       But this FM is throwing error.
       I tried by giving FILETYPE as ASC. The output internal table for this FM contains a field of type c size 32.
       Now it is able to read the file but I want to assign this value to a RAW data type variable.
       This it is unable to do. How to convert the char value to RAW data type?
    Please help!
    Thanks
    Gopal

    Hi,
    The documentation for the function module contains an example for RAW upload.
                begin of itab,
                      raw(255) type x,
                end of itab occurs 0.
               CALL FUNCTION 'GUI_UPLOAD'
               exporting
                  filetype =  'BIN'
                  filename = 'C:\DOWNLOAD.BIN'
               tables
                 data_tab = itab.

  • Problem in jar file with respect to operating systems

    Hi all,
    I am creating a jar file in windows operating system, When I deploy it in AIX machine the application is not starting up? There is any operating system specific commands to create jar files?
    Any ideas.
    Thanx in advance for your help.
    Sekhar

    I am starting the application through websphere admin
    console. When I am starting it is showing error
    message that the application unable to start.That you are using WebSphere is a very important bit of information you failed to provide!
    WebSphere can be configured to be very picky about what it allows! If your program does not require WebSphere to run then try running it outside of WebSphere.
    Also, make sure that the WebSphere container is executing using a version of Java that is compatible with your Application.

  • How to reorder user XDC file with respect to IP XDC?

    Hi All, 
    How do i  set a user XDC files to be processed affter all other xdc files(specially those *_clocks.xdc from IP)?Figure attached show the snapshot of my project from the command "report_compile_order -constraints". 
    i would like to have the tri_mode_ethernet_mac_0_user_phytiming.xdc to be processed last among the rest. This reason is for me to overwrite the xdc constraints values provided with the MAC IP core. 
    i have the set the processing order of this xdc file to the late and also tried the "reorder_files" command, but nothing seems work.
    advanced thanks for your help. 
     

    Hi ,
    I achived my goal of having the IP XDC files that i want to processed before the user_phytiming.xdc. This done by having the PROCESSING_ORDER of IP XDC files set normal. 
    just for sharring, all this while i been focusing on manipulating the  PROCESSING_ORDER user_phytiming.xdc instead of the IP XDC files. 
    The log of "report_compile_order -constraints" is shown below.
    Now, tri_mode_ethernet_mac_0_user_phytiming.xdc is processed after the tri_mode_ethernet_mac_0_clocks.xdc(IP XDC) which enable me to overwire the IP constraints to suit my system.
    report_compile_order -constraints
    INFO: [Vivado 12-3442] The output from report_compile_order is primarily targeted for human readability and ease of use. As such, the format and details in the output below could change over time. The 'get_files -compile_order' command produces this same information, but in a format that is better suited for using in any automated scripts, and is less likely to change format over time.
    Constraint evaluation order for 'synthesis' with fileset 'sources_1' & with fileset 'constrs_1':
    Index File Name Used_In Scoped_To_Ref Scoped_To_Cells Processing_Order Out_Of_Context
    1 iCAKM_EDGE_ARTIX7.xdc Synth & Impl NORMAL
    2 tri_mode_ethernet_mac_0_user_phytiming.xdc Synth & Impl LATE
    Constraint evaluation order for 'implementation' with fileset 'sources_1' & with fileset 'constrs_1':
    Index File Name Used_In Scoped_To_Ref Scoped_To_Cells Processing_Order Out_Of_Context
    1 tri_mode_ethernet_mac_0_board.xdc Synth & Impl tri_mode_ethernet_mac_0 U0 EARLY
    2 tri_mode_ethernet_mac_0.xdc Synth & Impl tri_mode_ethernet_mac_0 U0 EARLY
    3 afifo_CbCr2JPEGENC.xdc Synth & Impl afifo_CbCr2JPEGENC U0 EARLY
    4 afifo_data.xdc Synth & Impl afifo_data U0 EARLY
    5 afifo_data_buffer.xdc Synth & Impl afifo_data_buffer U0 EARLY
    6 afifo_length.xdc Synth & Impl afifo_length U0 EARLY
    7 afifo_OV2715_BUF.xdc Synth & Impl afifo_OV2715_BUF U0 EARLY
    8 afifo_pkt_length_buffer.xdc Synth & Impl afifo_pkt_length_buffer U0 EARLY
    9 afifo_sync.xdc Synth & Impl afifo_sync U0 EARLY
    10 afifo_y2jpegenc.xdc Synth & Impl afifo_y2jpegenc U0 EARLY
    11 iCAKM_EDGE_ARTIX7.xdc Synth & Impl NORMAL
    12 tri_mode_ethernet_mac_0_clocks.xdc Synth & Impl tri_mode_ethernet_mac_0 U0 NORMAL
    13 tri_mode_ethernet_mac_0_user_phytiming.xdc Synth & Impl LATE
    14 afifo_CbCr2JPEGENC_clocks.xdc Synth & Impl afifo_CbCr2JPEGENC U0 LATE
    15 afifo_data_buffer_clocks.xdc Synth & Impl afifo_data_buffer U0 LATE
    16 afifo_OV2715_BUF_clocks.xdc Synth & Impl afifo_OV2715_BUF U0 LATE
    17 afifo_pkt_length_buffer_clocks.xdc Synth & Impl afifo_pkt_length_buffer U0 LATE
    18 afifo_sync_clocks.xdc Synth & Impl afifo_sync U0 LATE
    19 afifo_y2jpegenc_clocks.xdc Synth & Impl afifo_y2jpegenc U0 LATE
    20 v_ccm_0_clocks.xdc Synth & Impl v_ccm_0 U0 LATE
    21 v_cfa_0_clocks.xdc Synth & Impl v_cfa_0 U0 LATE
    22 v_enhance_0_clocks.xdc Synth & Impl v_enhance_0 U0 LATE
    23 v_gamma_0_clocks.xdc Synth & Impl v_gamma_0 U0 LATE
    24 v_rgb2ycrcb_0_clocks.xdc Synth & Impl v_rgb2ycrcb_0 U0 LATE
    25 v_vid_in_axi4s_0_clocks.xdc Synth & Impl v_vid_in_axi4s_0 inst LATE
    Thanks you very very much. Have a nice day :-)
     

  • A basic query with respect to using Message Selectors in JMS

    Hi
    When i am going MEssage Selectors topic in web , it seems very confusing for me .
    I have written a simple JMS Application based on Weblogic as my Queue .
    I have two Java Files one for Message Producer and another file acting as Message Consumer using MDB
    I have a basic TextMessage with some header properties in my Producer file .
    Please tell me in what file should i put MessageSelector ??.
    Thanks for reading .
    Please clarify my query on this .

    Thank you very much .
    I found the code of a MDB making useage of a Selector .
    *<message-driven>*
    *     <message-selector>shirtType = 'polo'</message-selector>*
    *     </message-driven>*
    Assume that i written a MDB that listens to particular type of Messages (Polo in this case ) .
    Please tell me what happens to other messages in the Queue that were never listened by the MDB .
    Thank you .

  • Delivery creation with respect to Storage Type

    Hi Gurus,
    Can we have a control on the deliveries creation with respect to the storage Types.
    The situation is to have the outbound deliveries created only from a perticular storage type neglecting other storage types. Is there any customization?
    Thanks
    Shashidhar

    Hi ,
      For this you have to define storage type serch strategy,
    Path,
    LE> WM>Master data >Material>storage type indicator \
    LE> WM>Master data >Material>storage section indicator
    Then,
    LE> WM>Strategires>activate storage type serch (whmaintion indicator  -- st type)
    LE> WM>Strategires-->activate storage section serch  (wh -- maintion indicator   -- st section)
    Maintain the material master with warehouse number & storage type.
    ( In the case of  fixed bin maintain the storage bin in wm-2 view)
    Maintain the storage type indicator & storage section indicator.
    If you have allready maintained the storage type search strategy then  remove the symbol  *** from yor storage type search.
    Dev

  • XAI outbound messages and JMS

    I was hoping someone had some better (or more complete) documentation on how to go about setting up XAI for outbound messages using JMS.
    I find XAI documentation rather sparse on this subject so I was hoping for some expert tips ;-)
    Our setup is CC&B 2.2.0 with Weblogic 10 as application server. I am new to CC&B so I am not sure if I can just turn messaging on for everything or if it is business object/service specific.
    To be more concrete - I would like to place Field Activity messages onto queue once Field Activity has been created/modified/canceled.
    thanks in advance

    1) Who and when are these outbound messages are required to be sent out..Kindly explain with an example.
    Whenever the Outbound Message is created with Pending Status the framework will start to process
    for Example:-
    I've have a change handler for Account entiry. so whenever the Account entity modified or created the change handler will be invoked. In the
    change handler i've a code that will create a Outbound Message and i m storing the xml content in the XML Source of the Outbound Message.
    So now the outbound message is created with the XML content and status is pending. Once the message created the framework will process for sending
    to External system
    2) Is my Outbound message a XML request enclosed in SOAP envelope.
    Use the Message XSL file under External System page if you want enclose the xml content with SOAP envelope
    3) We configure an external system , with an outbound message type, XAI sender etc.So does that mean that the services of external syatem is interfaced through with CC&B through maybe the database, and the services of external system are defined in XAI inbound services. So that the MPL server reads the request, invokes the service name defined in the outbound request.
    No... the process is very simple...
    +1. you have created Outbound message type+
    +2. created XAI Sender+
    +3. and External System(in the this page u've included all the abv configuration).+
    +4. if create a outbound message the Framework will process and invoke(sending request to external system) the external system with the xml content+
    wht u've stored in side xml source column.
    Edited by: pgurumoorthy on Apr 22, 2009 3:11 AM

  • Generating XML File with Table data...

    Hi All,
    Bear with me, with my Oracle XML knowledge,,,
    we have Oracle 8i ( Relaease 3) as our database, and managegement want to have XML type of Text file, with respect to data in the Customer Table. Expected XML tags would be the Column Names of the Table.
    Table has three columns,, Name, Address, Telephone.
    So desired XML file looks like below:
    <Name>John Hunter</Name><Address> City Road, London</Address><Telephone>1223223</Telephone>
    If I deceided to do this task using PL/SQL, how could I start it,,,, All comments are welcome, this is the first time that I am going to generate this type of file ,,,

    Hi Chandana,
    You can check out the DBMS_XMLQUERY package for this purpose. It provides XMLType functionality in Oracle 8i. You can access the documentation for the same at:
    http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_xmlque.htm#ARPLS066
    If you happen to have access to Oracle 9i, then you can use XMLType Views provided with XML DB for your requirement.
    Thanks
    Shefali

  • Outbound message in Near Real Time - in CC&B V2.1

    Greetings,
    In CC&B V2.1, I am trying to send an outbound message from CC&B to an external Webservice.
    The process was as follows:
    1-Configured a Business object based on F1-OUTMSG Maintenance Object
    2-Create a new outbound message type based on the previous BO
    3-Created a new XAI sender with based on "OUTMSGSNDR" XAI class with HTTP URL pointing to the external webservice
    4-Created a new external system and linked the outbound message type to it.
    5-Created a plug-in script to insert a record into table F1_OUTMSG after forming the XML message
    Now when the records are inserted into F1_OUTMSG, the default XAI Receiver (F1OUTNNDMSG based on XAILOCAL executer ID) shipped with the system is failing with a "Null pointer exception".
    I am supposing when a record is inserted into table F1_OUTMSG with Pending status, the receiver will pick it and send it to sender specified in the external system configuration.
    Where did I go wrong in the above process?
    Thanks in advance
    AK

    Hi,
    Thanks for the response. I applied the change, but still same error happens when I refresh the Receiver.
    Where could other configuration error be?
    Thanks

  • Validate a XML file with a XSD File in ABAP

    Hi everybody,
    I am searching a way for validating a XML File with an external XSD File in ABAP. I know to validate with dtd is possible, but what about XSD?
    Can you help me in my urgend problem ?
    Greetings from Germany
    ismail er

    anyone an idea for my issue ???

  • When I try to open a file with adobe Bridge it will say that the parent application is not active, how can I fix this??

    When I try to open a file with Bridge the following message appears:
    I already re-installed PS CC and I can open the files trough Photoshop CC but not through bridge.Any advice please??

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Acrobat 7.1 IE plugin cannot open .pdf Files with mt/application/octet-stream

    Hi Folks,
    we have some problems to open pdf - files via Hyperlink in an IE Explorer. this files get from the web-server the MIME-Type "octet-stream".
    the only option is to save and then open the pdf files. But we want to open the pdf files directly IN the IE. the option to open it not in IE is not possible because then another application will not work.
    Is it generally possible to open an pdf File with an octet-stream MIME-Type with the IE-Pluin, and if Yes is ther any possible configuration we could try.
    Thanks for your help
    regards
    Felix

    Hi Bill,
    we already tried to change that checkbox that solves the problem but we get new problems with other applications, so this way is also no option for us.
    also we tried to repair / reinstall acrobat, but it has no effect.
    I suppose that maybe adobe just closed that door to open pdf documents with the octet-stream MIME-Type. Because it could an way to insert executable files in the system.
    maybe a higher version than 7.1 can do this?
    Thanks for your help, here in Germany it is already 2 pm so not far from quitting-time ;)

  • How do I get firefox to open pdf files with Adobe reader instead of google?

    Firefox is unsucessfully using google to open pdf files.  How do I get firefox to open pdf files with Adobe reader?
    Message was edited by: veeryTalonted

    "Google" is a search engine (website) and NOT (repeat: NOT) a PDF viewer. It can't and won't open PDFs in any real or imaginable way.
    Firefox added their own proprietary PDF viewer with version 20 - they're on 21 now. I'll be the first to admit "it sucks". You CAN'T fill in PDF forms with it, and you can't email them from the page like with Opera, Safari or Chrome (which use the reader plug-in still).
    Unfortunately, the ONLY option you have now that they've added it and killed the ability for the Reader plug-in to work with Firefox, is Tools>Options>Applications - select Portable Document Format(PDF) and choose "Use Adobe Reader (Default)". What that will do is FORCE Firefox to download the PDF instead of opening it in their terrible PDF viewer in the browser window.
    Or... use one of the other browsers I mentioned. They're all free.

Maybe you are looking for