Validation time period?

I have submitted a new feed for approval http://www.fmcog.com/Podcast/RSS/Preach.xml   But I haven't received a validation email and its been over 12 days?  Last similar podcast I submitted only took 24hrs to validate.  Are waiting periods longer now for approval?

Only by searching on the title of your podcast in the Store - though the Search results often lag behind a podcast's initial acceptance.
It's been just under three weeks - this is a bit long, but not all that unusual. You may just have got stuck in a queue. You could try contacting Support, but I don't think you'll get a helpful answer. Go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

Similar Messages

  • Valid Time Support - filling in gaps between non-contiguous records

    Is there an easy (or recommended) way to fill in gaps in records stored in a table with Valid Time Support?
    Here's my scenario. Suppose there are two "valid time" records for Adams in the table, one that's valid from 1/1/2000 to 1/1/2001 and the other that is valid from 1/1/2002 to 1/1/2003. In other words, there's a one year gap between the two records. The user wants to make a single edit to Adams that covers a broader period of time, e.g. 1/1/1999 to 1/1/2005, which should include the gap between these two records (and the gaps before the first record, from 1/1999 to 1/2000, and the gap after the last record, from 1/2003 to 1/2005).
    What's the best way to do this?
    I've tried setting the session time using DBMS_WM.SetValidTime() from 1/1/1999 to 1/1/2005, and then updating the database. But the update only changes the updated column (e.g. salary) without altering the VM_VALID timestamps.
    Initial values:
    NAME      SALARY     WM_VALID
    Adams     30000     (1/1/2000 12:00:00.000000 AM -04:00, 1/1/2001 12:00:00.000000 AM -04:00)
    Adams     31000     (1/1/2002 12:00:00.000000 AM -04:00, 1/1/2003 12:00:00.000000 AM -04:00)
    ==========
    DBMS_WM.SetValidTime(TO_DATE('01-01-1999', 'MM-DD-YYYY'), TO_DATE('01-01-2005', 'MM-DD-YYYY'));
    UPDATE tester_timevalues SET salary = 45000 WHERE name = 'Adams';
    ==========
    Updated values:
    Adams     45000     (1/1/2000 12:00:00.000000 AM -04:00, 1/1/2001 12:00:00.000000 AM -04:00)
    Adams     45000     (1/1/2002 12:00:00.000000 AM -04:00, 1/1/2003 12:00:00.000000 AM -04:00)
    I know this is "works as designed". But is there a relatively painless way to fill in the gaps in the records?

    Thanks, Ben. I will give that approach a try.
    BTW, I have an even better example where detecting and filling "gaps" in the effective dated periods is necessary.
    Suppose I have a link table (GroupMembership) with foreign key links to an Employee and a Group table. Say that there's currently a record in the GroupMembership table indicating that Bob was a member of the Steering Committee group from 1/2002 to 1/2004. The information now needs to be amended to indicate that Bob was really a member from 1/2000 to 1/2006. Even if the GroupMembership table has a column that allows us to UPDATE it, the UPDATE will only affect the 2002 to 2004 range, even though we've called SetValidTime() for the range of 2000 to 2006.
    We'll have to cook up some SQL to handle this case. But this seems like a case where Oracle's Valid Time Support could make this make this type of scenario easier to handle.
    As it works now, Valid Time Support will indicate that there is a record for the requested time period (2000 to 2006), but doesn't indicate that the record's valid time period is different than the requested time period (at least not without some additional work on the developer's part).
    Just a thought...

  • Hyperion planning data form in smartview: problem with summary time period

    We are using Planning ver. 11.1.2.2.300.20 and smartview 11.1.2.2.300 (build 070)
    We use common Data Form:
    In columns: Periods (Descendants including YearTotal - with no checkbox on start expanded)
    In Rows :accounts
    In some of our users computers,
    When they open Data Form in Excel (with Smart View) - its appears very strange:
    Summary Accounts are displayed as level 0 account in the summary Period columns (i.e. not in grey) and permit entering data.
    In addition when Entering data in summary time period (i.e. Year or Quarter),
    strangely,  the data doesn't  spread to the descendants months (level 0) .
    This phenomenon occurs just in few of the computers.
    Please help, how can we overcome this problem?
    Thanks and Regards
    Tami Kedem

    Hi Celvin,
    Thanks for your rapid response!
    All computers have the same version of planning and smartview.
    The computers where the Periods spreading and aggregation properties in Data form are not working,
    do work wonderfully when opening the Data forms in the web.
    I've tried everything, (remove suppressing, validations etc.):
    In all kind of data forms the spreading and aggregation properties on summary time periods are not working in smartview -
    and summary accounts on rows are not displayed in grey and permit entering data.
    We remove and reinstall MS-Office (2007) from the problematic computers, but it didn't help.
    Do you know if there is any kind of settings or softwares that might cause this phenomenon
    i.e. interrupts the smartview translation of the web Data Forms.
    Thank and best regards,
    Tami Kedem

  • Oracle apps OTL Time period LOV

    Hi,
    I need the time period LOV (data for example : September 30,2012 - October 06,2012) as a LOV. I need to utlilise similar LOV for my custom form. I could see an existing LOV for self servuce time responsibility for creating time card. But I don't see a valid select/code for this self service page when opened from jdev. It looks like something dynamic.
    Similar LOV is also there in the apps form time keeper entry find box. I am unable to find the code associated with the LOV directly.
    Anyone is aware of any such LOV for which I can get any select query or a code for the same. I am still trying to achieve the same with some research.
    Regards,
    Ad

    Hi Pillair,
    I believe he is looking for the underlying table ....
    select *
    from fnd_lookup_values
    where lookup_type = 'MTL_TIME_FENCE'
    Hope this helps.
    Cheers
    JD

  • Customer ##1 Enter a valid time interval error while generating customer BP

    Dear Experts,
    I am getting the following error when I am auto generating Customer while creating Business Partner in BP transaction code.
    Customer ##1: Enter a valid time interval
    Message no. CMD_API087
    Had anybody faced this problem?
    Regards
    Komal

    Hi,
    In Transaction 'BP', after values is put for BP name, Grouping & Create in BP role, there is a field for Validity period. Click on the icon to Create Validity period. This should resolve the issue.
    Regards,
    Nimesh

  • Assigning End of Validity Time

    Dear friends,
    I would like assign end of validity time to a document while itu2019s creating through CV01N and make the field as mandatory. While creating documents end of validity time is assigned automatically as 31.12.9999. How I can assign this period? Although I looked for customizing of document types but wasnu2019t able to find field.  
    Thank you,
    Melih

    Buddy ,
    To capture the validity for any DIR you need Engineering chnage management module
    Thru CC01 or CC31 you can create a Change number , by selecting the Document info record and assignthe required validy date for the change.
    Save and you will get the chnage number.
    Now in CV02n , open the DIR to chnage which you have made a link in CC01 or CC31.
    System wil pop up the Change number which you have generated against the DIR.
    release the DIR based on that validity date and Set indigator "lock" in DC10 under document status for "Release status".
    Also u can make Change number feild mandatory in DC10, by which you can track all the documents release with validity date.
    Let me know if you need more information .
    Regards
    Muralidharan.S
    Edited by: robo robo on May 20, 2009 11:56 AM

  • Time period scale 'M'

    Hi,
    We want to design a scale for condition, where the base value should be the total qty of a material posted in a period.
    For a period, if
    Qty            - Value
    <100         - 5%
    100-1000  - 4%
    1000+       -3%
    How can i design the condition?

    HI Kishore,
    As you mentioned if system is considering the condition record validity period then how the system will determine the record in the above case?
    I.e if I am maintaining a condition record with scales as mentioned above
    Upto 1 month - Rs.1000
    Upto 3 month - Rs 3000
    then which validity period I have to enter?
    My requirement is system should should automatically determine the values from the condition records as per the time period.
    Hope my requirement is clear.
    Regards,

  • Valid time dimensions

    Hi,
    When reverse engineering an Oracle 12c database (using Data Modeler stand alone, 4.1 EA2 using a thin jdbc connection) on some tables valid time dimensions are detected in the database.
    This suggests the existence of a period for clause on the table in the database. This is not present, however.
    These valid time dimensions are reversed engineered to the model.
    Where can these valid time dimensions (named, for example "SYS_STSSAKFUXTO4R$45K8IN#E2LV5") be found in the database ?
    And why is it not possible to exclude the valid time dimensions in comparing the model with the database ?
    Richard.

    Hi,
    Thnaks for sorting this out. Please note that this also causes a lot of differences being reported when synchronizing the model with the database (or vice versa).
    I assume this behaviour will disappear once the bug is fixed and the "valid time constraints" have been erased form the model.
    Is this correct ?
    Richard.

  • PP-PI Exclude time period from scheduling

    I have a design question,
    I'd like to exclude a certain time-period from scheduling, how do I do this?
    Example:
    From 1st of January - 1st of february, I cannot plan any production for material A (I can plan production for other materials). For the rest of the year, I'd like to spread my production for material A equally. How do I design this?

    Hi,
      This can be done by locking the workcenters.
    1. For all your workcenters goto capacity tabpage and choose capacity header.
    2. choose intervals and shifts and choose intervals.
    3. Enter the period as valid from 01.09.2007 and  valid to 31.10.2007
    4. In the same line goto work days and choose 0 ie non working days( if mentioned as working days it will be overrided as non working days) and save.
    5. For this period eventhough you have reqmts while converting the planned orders
         you will get pop up message that no routing is selected.
    6.It is upto you decide whether this planned order can be converted with default values from operation ( ie from tcode opjg).
    7. You can exit
    8. And also you can delete out dated planned orders by using roll forward period.
    Hope you got some solution to your problem and reward if useful.
    Regards,
    nandha

  • Validation-time 002 and 555 in CO-validation

    Hi together,
    does anybody know the differences between the validation-times 002 and 555 in CO-validations?
    In which cases is time 555 evident ?
    Kind regards
    Udo

    HI,
    validation call-up point 0555, as you mentioned SAPNET 91005, this validation call-up point can be used to validate all sender / receiver relationships. I used this as in the SAPNET-note described to validate company codes within allocation cycles.
    One difference to call-up point 0002 is (SAPNET 392273):
    "For the allocations (assessment, distribution, periodic reposting, indirect activity allocation), validation is not called at point 2 (refer to Note 91005)."
    Best regards, Christian

  • Report workload by calculating how many versions of SharePoint list items created in a certain time period

    I have a total of 66 SharePoint 2010 lists - yes, 66! - each lists contains between 1500 and 3200 list items.  My employees update these various list items throughout their workday.  Each update to a list item creates a new version of the list
    item.  On average each list item will have anywhere from 5 to 10 versions before it is done.  I need to create a report that tells me how many list items they've updated in a certain time frame.  I have come close but still cannot arrive at
    the data I'm looking for. 
    This is what I have so far:
    I've created a report using SQL Report Builder 2008 v3 where I've filtered it to show only items MODIFIED between, for example, Feb1 and Feb28.  Of those records, I want the report to tell me how many versions were created during that time
    frame.  The result is one list item with 5 total versions.  Versions 1.0, 2.0, & 3.0 were created on 12/12/14.  The last two versions, 4.0 and 5.0, were created on 2/24/15.  Therefore, the answer I'm looking for is 2 because they
    created 2 versions between Feb1 and Feb28.
    However I get the following results using these queries:
    If I do a =Sum(Fields!owshiddenversion.Value) in the expression field I get the total versions which is 5
    If I do a =Count(Fields!owshiddenversion.Value) in the expression field I get the instance which is 1
    Is there a way to count ONLY the number of versions created in a time period?  Is there another hidden field in SharePoint that I can use in the expression that will give me results I'm looking for?

    Hi Rafael70,
    Per my understanding that you have already get all the need fields and informaiton of the updated version of list items and now you want to calculate how many versions of SharePoint list items created in a certain time period, you can't get desired result
    using sum and count function, right?
    I have tried to tested on my local environment but because I am not clear what is value in the field "owshiddenversion", I assumed you have two datatype parameters (StartDate and EndDate) to help filter the report in a certain time period.
    Generally, if you have add the filter correctly, it will filter the correct number's updated version in this time period, I would like you to provide details information as below to help better analysis the requirements:
    Could you please provide sample data of the table.
    Please provide snapshot of the report structure you have currently designed.
    Please try to provide all the expression you have used.
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Closing characteristic after a time period

    Dear All,
    I am looking for a way to close an inspection charcateristic automatically after a certain time period.
    I have 3 characteristics for my inspection lot. The first should be closed 20 hours after generation of the inspection lot. The second 15 hours after that and the third 5 hours after that.
    Is there a way to do it?

    You can only make automatic UD for inspectoin lots if you meet the other requirements, which I doubt you do.  I.e. all required characterisitics have a status of 5 and all of those use a fixed scope.  You could make all your characterisitcs optional but that could lead to a whole bunch of non-processed lots.   I.e. if the wait period is met, the lots will be closed out.   This might be problems if some day the lab falls behind or is gone over a long planned outage.  It also runins the ability to indicate to techs the optional vs required characteristics!
    FF

  • How do you set the time period on IMAP email accounts (razr maxx)

    Hi Guys -
    Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
    Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
    On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
    Your help is appreciated!
    Best Wishes for the Holiday Season.
    -Rich

    Hey Rich.  Once in 'settings,' there should be a "days to sync' under the 'data usage' section.   You don't have that?

  • Is there a way to create a smart playlist that lists my top 25 plays from a specific time period (i.e. - top plays from the last 90 days)?

    Is it possible to create an itunes smart playlist that lists my top 25 most played songs in a specific time period (i.e. - the last 90 days)?  It seems that any "most played" list I create counts every spin a track has had in it's history of being in my library. 

    The challenge is is not to determine which of the tracks that have been played in the last X days has been played most since the beginning of time, but which have been played most in the last X days. iTunes can do the first one but it simply doesn't have the power to do the second.
    tt2

  • Query for Old Data that does not match New Data within a given time period

    Hello all,
    One of the reports I need to create is for all associates who went from one department to another within a given time period. The way I ran this report in Reportsmith (pulling from our old system) was to compare the dept field from the beginning date to the dept field at the end date and it would give me those associate's that had moved. I had to do it this way b/c dept changes can happen using several different types of actions (supv change, promotion, etc.), none of them exclusive to just dept changes. We are now using Oracle HRMS and I need to create this same report with this system using SQL.
    Does anyone know how to compare data between two different dates and pull the ones that don't match? Your help will be GREATLY appreciated!
    Warm Regards,
    Yasmin E. Alberto
    HRIS Analyst
    [email protected]

    Hi, Yasmin,
    In the sample data you posted, nobody changed departments between May 1 and May 11. In fact, there were no assignments of any kind between January 16 and May 17, so I wouldn't expect any output for that period.
    A person (or rather, a duck) did change deptartments on May 20, so if you change the upper limit of the date range to
    AND    ASG_LAST_UPDATE_DATE < TO_DATE ('05/21/09', 'MM/DD/RR')you should see her.
    You've probably noticed that this site likes to compress white-space.
    To post formatted text (such as table results or indented code) type these 6 characters:
    (small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for