Validation too tight to mention. How to allow CRLF in a retricted textfield

Hi Folks.
Here's a brain teaser for you.
I have a text field that I have a validation on to only allow the following characters...
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789/-:().,'+
and a whitespace.
I would also like to allow a CRLF Carriage Return Line Feed as well.
Does anyone know if this is possible?
At the moment if I enter the following
AAA
BBB
The validation will fail due to the CRLF.
If I enter AAABBB or AAA BBB then the validation will pass.
Many thanks
Simon

It is actually simple, I did it accidently.
Instead of
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789/-:().,'+
Put a hard return in.
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789/-:().,'+

Similar Messages

  • Our benefit administrator keeps getting an error on adding a social security number that starts with a 9, that is a valid SSN for a spouse, How do we allow this to go through?

    Our benefit administrator keeps getting an error on adding a social security number that starts with a 9, that is a valid SSN for a spouse, How do we allow this to go through?

    To attempt a new chat session...
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    http://helpx.adobe.com/x-productkb/global/service1.html

  • How to allow multiple wildcard elements in biztalk schema

    Hi,
    In my input xml, I can have one or more unknown elements in the xml. I know I can use <xs:any> in my schema for each of these elements but it does not work when there is unknown number of these unknown elements occuring in the input xml.
    I know the location in xml where these unknown elements appear but I dont know how many times they appear in each location.
    Any help on how to allow it would be very appreciated
    thanks
    manibest

    Hi manibest,
    You're trying to find a technical workaround on how to handle this in schema. But we have to understand that schema is to defining the structure and content of XML and you want a schema which is not going to define the content/structure of your
    XML, its basically a flaw to conceive a Schema which has no relation to the XML.
    Anyway what do you mean by " xml accepted by the schema"  - As mentioned in the
    other post you have raised today, if you don't enforce XML validation and if you don't bother about mapping this unknown fields across to the outbound schema or if your orchestration's processing is not bound to these unknown elements then you can
    do use it.  
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Adobe Acrobat Standard 9.5 Install Error:  "Error applying transforms please ensure specified transform paths are valid".  Any ideas on how to fix this?

    I had Acrobat Standard 9.5 on a laptop that broke.  Adobe Acrobat Standard is paid for and all I need. I had to get a new PC (Windows 8.1) and I did downloaded Standard 9.5 but when I went to install it the installer gave me an “Error applying transforms please ensure specified transform paths are valid”.  Any ideas on how to fix this?

    Rahul,
    No error numbers other than the message I mentioned previously.
    I tried the transforms repair and it reported no Acrobat product (correct, none yet installed) or no administrative privileges (I am the administrator and have done previous administrative actions).
    When I unzip the Acrobat file this is what is in the setup ini file:
    [Startup]
    RequireOS=Windows XP
    RequireMSI=3.0
    RequireIE=6.0.2600.0
    [Product]
    msi=AcroStan.msi
    Languages=1033;1031;1036
    1033=English (United States)
    1031=German (Germany)
    1036=French (France)
    CmdLine=TRANSFORMS="AcroStan.mst"
    [Windows XP]
    PlatformID=2
    MajorVersion=5
    MinorVersion=1
    ServicePackMajor=2
    [MSI Updater]
    Path=WindowsInstaller-KB893803-v2-x86.exe
    Thoughts?
    Thanks again,
    Tom

  • If someones is using my account/apple id can they receive calls or messages too?? and how can i notice  if someones using my apple id??

    if someones is using my account/apple id can they receive calls or messages too?? and how can i notice  if someones using my apple id??

    You cannot make your @icloud.com address the login address for the ID. However you can change your ID, currently a Gmail one, to any other functioning non-Apple email address. The Gmail address would then no longer access your account, and so even if someone were to obtain posession of it (is that even possible) it wouldn't allow them to get into your account.
    If you want to change your ID to another email address please follow the procedure outlined below, particularly noting the first step.
    Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
    Create a new email address, for example  at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
    Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
    Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
    Enter your new address and click 'Save changes'.
    Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
    Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
    I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

  • Pdf sent won't open beyond cover sheet?  how to allow click thru of all files?

    pdf sent won't open beyond cover sheet?  how to allow click thru of all files?

    That's handy, because I can run gmail and Chrome too.
    Ok, I sent myself a PDF attachment. I'm going to go step by step through what happened
    to me, and you can tell me where your experience becomes different.
    1. The email shows a preview of the top part of page 1 for the attachment.
    2. I hover over the preview and I get two icons, "Download" and "Save to drive".
    3. I click Download.
    4. The attachment downloads and I see it in the status bar.
    5. I click on the document in the status bar. It opens to page 1, but I can use the
    scroll bar to read all of the pages.
    6. I hover in the bottom right of the page, until Chrome's PDF toolbar appears.
    7. I click the save icon.
    8. I save the file to my desktop.
    9. I open the file from my desktop. It also has all pages.

  • DRAM timing too tightly - reload timing

    Hi
    I've been through all previous threads on this subject, but cannot find a solution suitable for myself.
    I'd been using my pc without problems for several weeks until last night when it failed to boot up, hanging on the pre-BIOS screen. I rebooted and got the message "DRAM is too tightly so reload timing". It then hangs again when a key is pressed and I'm unable to boot in Safe Mode.
    I've definitely not altered any settings and not overclocked, so can't see why this is suddenly happening.
    Any ideas?

    A couple days ago my computer starting doing the same thing.  I am not at it currently so I can't get the required specs.
    The first time I just started to transfer a CD onto my harddrive and my computer auto rebooted.  Didn't see any odd messages so I just let it reboot.  I restarted all apps I had running and started the CD transfer again and it rebooted.  This time I saw the "Dram timing too tightly loaded" message in the bios.  I went and checked my bios settings and they seemed to be ok.  DRAM set to auto, DDR timing set to "By SPD" and DDR voltage 2.5V.  I did bump the DDR voltage up to 2.7V but I am still getting the same message.
    I tried changing all these setting to what other threads have been recommending but still didn't work.
    CAS# Latency:
    RAS# Precharge:
    RAS to CAS Delay:
    Precharge Delay:
    Burst Length:
    Before this started my computer has been running perfectly for months.  I just don't understand how it can start flaking out all of a sudden since I have not done any changes.  And the reboots don't seem to be consistent other then when I am running a lot of memory intensive apps.
    Known system specs from memory
    MSI 6728 Neo2-FiS2R i865PE
    350W PS
    3 X DDR Pc3200 512MB 400Mhz
    WINXP Pro
    I will post all required information later today.
    Thanks

  • Lightning port too tight - is that normal?

    I'm satisfied with my iPad Air, but I've noticed one thing that bothers me - a lot. When I insert the lightning connector, it seems way too tight. I have to jam it in much harder than with the iPad Mini.
    This is a new unit. Should I demand a replacement? Am I doing something wrong?

    Both pieces of advice make sense.
    However, my iPad Mini and iPad 4 use the Lightning connector easily; the iPad Air almost needs a wrench. I'm still in the first days of ownership, and I can only imagine how many connectors I'll damage over time. I'll demand an exchange - or, if possible, a fix.

  • MSI 875P FISR - 'DRAM timing is too tightly so reload timing'

    'DRAM timing is too tightly so reload timing'
    I recently got this message upon bootup.  I have an MSI 875 P and I have 2 Gigs of Kingston RAM. I am wondering what would cause this message to come up out of nowhere.  I was had the DRAM Timing by SPD Enabled and since that didn't seem to work I disabled it.  I set the CAS, RAS, and CAS to RAS to 3 - 3 - 3 respectivly as listed below on the manufacturers web page located at:
    http://www.ec.kingston.com/ecom/configurator/partsinfo.asp?ktcpartno=KVR400X64C3AK2/2G
    My Current Settings Are:
    CAS# Latency - 3 Clocks
    RAS# Precharge - 3 Clocks
    RAS# to CAS# Delay - 3 Clocks
    Precharge Delay - 8 Clocks
    Burst Lenght - 4
    DRAM Integrity Mode - Disabled
    --MY RAM--
    RAM: KVR400X64C3AK2/2Gl
    Description: 2GB Kit 400MHz DDR PC3200 DIMM 3-3-3
    Specifications:  Standard 128M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Gold)  (Datasheet)
    --Motherboard Manual DRAM Info--
    Configure DRAM Timing by SPD
    Selects whether DRAM timing is controlled by the SPD (Serial Presence
    Detect) EEPROM on the DRAM module. Setting to Enabled enables the
    following fields automatically to be determined by BIOS based on the
    configurations on the SPD. Selecting Disabled allows users to configure
    these fields manually.
    DRAM CAS# Latency
    This controls the timing delay (in clock cycles) before SDRAM starts
    a read command after receiving it. Settings: 2, 2.5 (clocks). 2 (clocks)
    increases the system performance the most while 2.5 (clocks) provides
    the most stable performance.
    DRAM RAS# Precharge
    This item controls the number of cycles for Row Address Strobe
    (RAS) to be allowed to precharge. If insufficient time is allowed for
    the RAS to accumulate its charge before DRAM refresh, refreshing
    may be incomplete and DRAM may fail to retain data. This item applies
    only when synchronous DRAM is installed in the system. Available
    settings: 2 clocks, 3 clocks, 4 clocks.
    DRAM RAS# to CAS# Delay
    When DRAM is refreshed, both rows and columns are addressed
    separately. This setup item allows you to determine the timing of the
    transition from RAS (row address strobe) to CAS (column address
    strobe). The less the clock cycles, the faster the DRAM performance.
    Setting options: 2 clocks, 3 clocks, 4 clocks.
    DRAM Precharge Delay
    This setting controls the precharge delay, which determines the timing
    delay for DRAM precharge. Settings: 5 clocks, 6 clocks, 7 clocks, 8
    clocks.
    DRAM Burst Length
    This setting allows you to set the size of Burst-Length for DRAM.
    Bursting feature is a technique that DRAM itself predicts the address
    of the next memory location to be accessed after the first address is
    accessed. To use the feature, you need to define the burst length,
    which is the actual length of burst plus the starting address and
    allows internal address counter to properly generate the next memory
    location. The bigger the size, the faster the DRAM performance.
    Available settings: 4, 8.
    DRAM Integrity Mode
    Select ECC (Error-Checking & Correcting Code) or Disabled according
    to the type of DRAM installed.
    I am wondering if something else could be interfearing with the ram such as the AGP slot/card or if this is strictly a RAM issue.  I have not seen this message before.  Are my current settings what they should be for this RAM?  Should I be asking Kingston this instead of coming here?

    Thanks for the response.
    My current DDR Power Voltage is set to 2.70. 
    Do you think 2.75 would be better?  I'm wondering why you suggest 2.7 or 2.75, now that I look at the RAM specs it actually says 2.6 as posted above.  I am not trying to be a jerk, I am just curious and want to know more!
    My AGP Power Voltage is set to 1.50.  I have a BFG Geforce 6800 GT OC 256 MB.  I'm wondering if changing this a bit might help my graphics card as well? Perhaps 1.55 or 1.60V?

  • I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    Did you try to change the location  in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

  • How to allow some fixed extension go in from outside to inside but not allow go from inside to outside

    how to allow some fixed extension go in from outside to inside but not allow go from inside to outside
    for example, allow JPEG, MOV, AVI data flow from outside to inside
    but not allow JPEG, MOV, AVI files access or upload or get by outside, in another words not from inside to outside
    how to configure?

    Hi,
    The ZBF link sent earlier show how we can inspect URI in http request
    parameter-map type regex uri_regex_cm
       pattern “.*cmd.exe”
    class-map type inspect http uri_check_cm
       match request uri regex uri_regex_cm
    ZBf is the feature on Cisco routers and ASA though concepts are little same but works differently. However it is important that you can be more granular with the protocol (layer 7) inspection only. Like on ASA if you will try to restrict .exe file from a p2p application that won't be possible, But on router you have some application for p2p in NBAR and you can use it file filtering. Please check configuartion example for both devices.
    Thanks

  • ITunes / AppStore problem: I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    credit card it tells me my credit card is not valid for the store.
    Hi Don ...
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    The iTunes and Mac App Store are one in the same.
    And check out this support article here   >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • I have myyahoo set as my search engine. When I try to open this page I get an message saying that it cannot be opened because of too may redirects.  How can I get this to open again?

    I have myyahoo set as my search engine.  Every time I try to open it a get a message that myyahoo cannot be opened because of too many redirects.  How can I get myyahoo page to open?

    Once you have obtained an external drive and connected it you will 'clone' your internal drive to it.
    Download Carbon Copy Cloner (it is not free but there is a fully functional trial version which is). Use it to clone your internal drive to your external drive. When that is done you will reboot from the clone and use Disk Utility to erase the internal drive (choose Mac OS Extended (Journaled)) as the format (this is normally preset, but check). Make sure to give the external drive a 'distinctive' name, don't want to get drives mixed up in this process.
    Once that is done you will use Carbon Copy Cloner (from the clone) to restore the external to the internal.

  • How to allow the special character in folder or filename

    when i add the special character "&" in folder or file name it gives following error
    "The file or folder name "P&A" contains invalid characters. Please use a different name. Invalid characters include the following: ~ " # % & * : < > ? / \ { | }. The name cannot begin or end with dot and cannot contains consecutive dots."
    how can i allow these character in folder or file name.
    waiting

    Hello to everybody
    It's ok for the ~ " # % & * : < > ? / \ { | } characters, they cannot be allowed,
    but in a lot of languages there are letters like  è é à ù ò that are accepted for path and/or filename;
    how to allow these characters? Moss indexes them but when doing some searches and clicking on these files, in the new internet explorer windows the file cannot be opened abd examining the url the è é à ù ò are replaced with other character.
    Thanks in advance to everybody
    Regards to all
    Roberto GerlandoGerly

  • Trying to download a movie on a laptop.  tellls me i can't play it on that computer because my apple account has too many users.  how do i see who is listed as a user so that i can delete one if it's not needed

    trying to download a movie on a laptop.  tellls me i can't play it on that computer because my apple account has too many users.  how do i see who is listed as a user so that i can delete one if it's not needed
    please help
    [email protected]

    The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
    I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
    As for the Scan button not working, the following is documented by HP
    Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
    But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP.

Maybe you are looking for