Validation while delimiting IT185

Hi,
When user tries to delimit a particular record in IT185 through PA30, we need to do some validation.
I am trying this while setting a break-point in exit : ZXPADU01 & ZXPADU02. but it doesn't stop there.
Kindly let me know any exit or BADI where in I can add a specific check.
Thanks...

Hi Sam,
You can use both BADI as well as user exit for validation when delimiting the infotype 0185.
BADI : you can use badi HRBAS00INFTY method AFTER_INPUT or BEFORE_UPDATE to validate some thing after input.
User Exit: You can use user exit ZXPADU02 for all the PAI validations, but for this you will need to create a project in SMOD/CMOD and activate it to activate the user exit.
Regards,
Ramnivas

Similar Messages

HT2486 The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.

The selected file does not appear to be a valid comma separated values (csv) file or a valid tab delimited file. Choose a different file.

I guess your question is, "what's wrong with the file?"
You're going to have to figure that out yourself, as we cannot see the file.
Importing into Address book requires either a tab-delimited or a comma-delimited file. You can export out of most spreadsheets into a csv file. However, you need to make sure you clean up the file first. If you have a field that has commas in the field, they will create new fields at the comma. So, some lines will have more fields than the others, causing issues like the error you saw.

Why do i get an error ( language code suply is not valid) while trying to sync with my ipad2

why do i get an error ( language code suply is not valid) while trying to sync with my ipad2
i'm using macbook pro and trying to share some photos with my ipad2. when i try to register my ipad i get this error.
tnx,
Dani.

AMDS for Windows
http://support.apple.com/kb/TS1567

I want validation while creating material master with profit center

Dear Experts,
I want validation while creating material master with profit center.
If 0001 plant having 100100 profit center
0002 plant having 200200 profit center
Material A cant be created for 0001 plant for with wrong profit center 200200.
Kindly help & provide me solution clearly

Hi,
Profit centers are assigned to controlling areas. And controlling areas can have many plants under them. So as long as both the plants and profit centers are in the same controlling area users will be able to extend the materials.
You should put in your validation control in the material master user exit. One of the exits you can use is
MGA00001 Material Master (Industry): Checks and Enhancements
Thanks & regards
Hameed Parvez

Issue with data Validation while migrating from one application to another

Hi All,
I am having a strange issue Kindly please help me .
I have a data form which have data validation on each cell.The dataform is quite large and contain data for 4 accounts and year (Jan to Dec) combination .The issue is that I when I migrate this data form to other application which is just the replica of the main application. The validation on each cells changes its reference points.
I have 5 more similar data form and I need to migrate then to other application and also on production sever. Is there any way that while exporting and importing them using formutil.cmd or other way that the validation cells reference does not change its reference point.
For ex I have validation on Cell A5,A6..........AA6 after migrating it changes to A1,A1.........AA1.
I am using 11.1.2.1.0 version of Hyperion Planning
Kindly please help.
Thanks in advance
Vikash
Edited by: user11391767 on Nov 30, 2011 10:47 AM

Hi Mehmet,
I tried using the FormDefUtil.cmd .But by using this the reference points of validation changes to first cell when imported.
Thanks
Vikash

WBS validation while creation of PO

Hi Experts,
I have a typical scenario.
I am procuring manpower services.
First, I create service master records for all employees available in the HR master records.
In the HR master Data, for each employee there is one WBS element for their Projects. Once project is completed, and new project is assigned, New WBS is assigned.
I am creating the Service POs. I use employee number as the service master number in the PO. While creation of Service PO, I have to enter WBS element.
I want system to validate WBS element entered at the time of PO with WBS element of HR Master record.
Can any body guide me which user exit I have to use here.
Or is there any other solution w/o using exits?
Thank you

Hi,
Check on it:-
Re: check validation of WBS and AGENT at SC level instead of PO creation time.
/thread/1200667 [original link is broken]
Re: Validation in CJ02 while SAVE
pherasath

Creative Cloud validation while traveling

I travel for long periods of time as a photographer. At least one of the countries I stay in, for periods of 3 to 4 months (Grenada, and there are probably others) apparently do not have Creative Cloud. While in Grenada, will I have difficulty validating my Creative Cloud (every 30, 99 days, whatever?) or downloading other programs with it? Any other Creative Cloud concerns while traveling I need to be aware of?

Hi snap2916
As your account billing details are in Canada you can sign up for Creative Cloud membership. Although we don't sell direct to Grenada, you would still be able to use your CC membership while traveling.
From the FAQ:
"An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
Thanks
Bev

No G/L validation, while creating SCand as well as changing the SC.

Hi SRM gurus,
There is no G/L account validation with Combination of AAC,
While crating SCand as well as Changing the SC.
After completion of approval process, the Cart will be in Application Monitor.
with Error "Backend transmission " ME045 G/L Account can't be used"
Can any body tell. is ther any BADI or OSS note to validate the G/L Account
Greately Appreciated
CK

Thank you both for attempt to reply.
Actually everything working fine.
My requirement is system should display an error message "G/L account Can't be used",
at the time of creation as well as changing the SC."
Even though we maitained the Invalid combination of Cost assignment and G/L account in Config.
Define G/L Account for the Product Category.
Now System is allowing to create SC with invalid combination of AAC and G/Leg.
"N" G/L :22222 actually this is a invalid combination in the backend.
System is only giving error after completion of approval I.e
While creating Back end document PR.
This is wasting time for process.
So we have to restrict the shopper at the time creation as well as change the Cart.
Same as in the Backend PR creation scenario.
I request you all
Is there any FM,BADI or OSS note relevent to validate G/L account at Runtime.
Thanks a lot.
CK

How to avoid validation while navigating to the next train station..11g u2

Hi,
I have a case where I use the same view object across the train stations while entering the data.
My problem is, when I click the Next button it gives an error saying that I am missing some of the mandatory fields that are exposed in the coming screens.
To make it more clear..
Say that I have an employee vo having (*id , name, surname, department, salary ..)
I create a train taskflow and create two page fragments one for entering id, name, surname and the second one is for department and salary.
When I try to navigate to the next train station after entering fields in the first one I get an error saying that "salary is missing" .
What should I do to postpone the model validation until I commit something?
Thanks

try using postback to avoid validation again...
        Boolean l_postBackValue = (Boolean)JSFUtils.resolveExpression("#{adfFacesContext.postback}");
        Boolean l_defaultBooleanValue = new Boolean("false");
        if (l_postBackValue.equals(l_defaultBooleanValue)) {
        }

Cost center validation while creating PO

Hi,
How can we put a cost center validation in PO.
we are experiencing issues with PO's created for a different company code at the time of posting invoices.
how can we put a check while creating a PO to validate the cost center.
Can we put a check on User authorization to input only come cost centers at the time of PO creation?
Highly appreciate your thoughts as it is very important.
Thanks
Madhu

Hey Madhu,
I believe certain error messages have been deactivated in you system, as the cost center master data wouldd have a company code in it and it is supposed to validate it.
go to OBA5 and enter application are KI and activate message 113 to an error
KI113 would not allow you to purchase across company codes

Validation while running MRP

Hello Experts,
Currently while running MRP, system has the provision of taking material which are in scrap stock, We want to put a validation so that material of scrap location cannot be used while MRP run .
Please suggest.
Regards,
Ankur

You need to exclude the scrap storage location from MRP through IMG tcode S_ALR_87006263
Also for all the materials you need to change the MRP indicator = 1 in MMSC for that storage location. You can do it in a mass way using tcode MM17.

Validation while assignment of Check through FCH5 or F110

Hi SAP Gurus,
Greeetings of the day.
Could you please advice me on the requirement which is as follows:
When assigning check to the Payment document, I require a validation.Check issue is done through FCH5 or F110. Check shouldnot be assigned to the Payment Document that has only GL line items in it (not even one vendor or customer item)
Ex: Expense a/c dr
             To bank a/c
So the validation should check that the payment documet should contain atleast one vendor or customer line item. & this should be exempted for one Doc Type= "ZC" through which salaries are posted and the entry will be as follows
Salaries a/c Dr
   To Bank a/c
Please suggeste me if we can make it through a validation or substitution or an user exit or an field exit.
Appreciate you quick & clear response.No need to say that Iam open to points for the solution which can serve the purpose.
To
Near & Dear
From SAINT

Hi SAP Gurus,
Greeetings of the day.
Could you please advice me on the requirement which is as follows:
When assigning check to the Payment document, I require a validation.Check issue is done through FCH5. Check shouldnot be assigned to the Payment Document that has only GL line items in it (not even one vendor or customer item)
Ex: Expense a/c dr
             To bank a/c
So the validation should check that the payment documet should contain atleast one vendor or customer line item. & this should be exempted for one Doc Type= "ZC" through which salaries are posted and the entry will be as follows
Salaries a/c Dr
   To Bank a/c
Please suggeste me if we can make it through a validation or substitution or an user exit or an field exit.
Appreciate you quick & clear response.No need to say that Iam open to points for the solution which can serve the purpose.
To
Near & Dear
From SAINT

How to remove ANT Validation while Compiling SCA or BPEL in 11.1.1.4

SOA/SCA/BPEL Gurus,
As you know, sometimes we have to use the runtime WSDL URL directly in the BPEL process when invoking an external web service (say OSB). But then the service needs to be always available when deploying thru' ANT script as it validates and compiles. It has been a big problem whenever I deploy the BPEL if the invoking service (OSB) is down. On the other hand, the OSB deploys fine using ANT when the SCA is down.
I am expecting the BPEL should throw an error only at the runtime but not at design or deployment time like OSB.
Now my question is,
Though we all know we can resolve this by importing the WSDL/XSD to the project, I would like to know if there is a way to Disable/Remove the Validation part in the ANT Script so that it can create the jar/sar file and deploy to the server.
FYI -
The error is thrown out from ant-sca-compile.xml and the target is <target name="scac" description="Compile and validate a composite">
Please help !!!
Thanks
Bala
Edited by: 805364 on Mar 11, 2012 9:01 PM

Bala,
On the other hand, the OSB deploys fine using ANT when the SCA is down. OSB always needs a local copy of WSDL/XSD. It never references any WSDL/XSD over network at design,deployment or runtime.
I am expecting the BPEL should throw an error only at the runtime but not at design or deployment time like OSB. For building and validating the process components at deployment time, XSD/WSDL's must be available otherwise server may end up deploying incorrect/invalid configurations. So I don't think SOA is doing anything unexpected. In case you don't want to import artifacts into project then you have two other options -
1. Use MDS for sharing artifacts
2. Use UDDI (Universal Description Discovery and Integration). Oracle recommends Oracle Service Registry 11g (OSR). The advantage is that you can use OSR and SOA Suite in a Shared WebLogic Domain.
Regards,
Anuj

Validation while create data type

HI All ,
I have a pop-up in my report that user can create data type in didc,
There is a simple way to support validation for data types ,
I have pop-up where the user need to provide name of attribute
he need to create and the data type for it (char ,string ,int etc )
and he also need to provide the leng of the attribute he want to create
(e.g. char10 ) and also decimal places .
the issue here that i need to do some validation in the pop-up
for e.g. if user choose
case 1
name     - attribute1
datatype - string
leng   - in this case he dont need to provide leng (string )
dec - dont need to provide (string )
case 2
name     - attribute1
datatype - char
leng   - 10
dec - dont need to provide (char )
Any idea how to do this validation in a simple way (maybe to use standard functionlity)
Regards
Alex

HI Keshav.
What i did is created a popup with FM in the popup i have 4 field
the field with the data type which i want to trigger event to it is domain and not ref to FM
The ppoup have 4 field
attr name
datatype
length
decimal
so from what you are say there is not option to trigger event when the user press F4
and choose a entry from it ,
since what i want to do is that if user for instance chose string i want that the next to fields (length and dec ) will be
remove from the popup since he dont need them .
and for he choose char the the decimal field will remove from the popup
Any idea how to solve this issue ?
Regards
Alex
Edited by: Alex Dean on Oct 12, 2010 3:02 PM

Foreign key validation while creating master/detail record in document mode

I am creating master/detail records in the document mode. And I am generating the master primary key in the create() method of the master Entity Object. Now I valdate the foreign key in the detail Entity Object's validateEntity() method by doing a query to the master table through some View Object.
But since the master record has not yet been posted (since it hasn't been committed) to the database, this query does not return any record and the validation fails in detail object.
And thus the create fails.
Please let me know if this is the right approach for doing this. If so where I am going wrong? Else please let me know if there are any better approach to do this.
Kunal

Kunal:
Use a code snippet like the following:
--- Assuming you're in the detail EO's create method ---
oracle.jbo.server.EntityDefImpl eDef = oracle.jbo.server.EntityDefImpl.findDefObject(<package-qualified-name-of-the-master-Entity-Object>);
oracle.jbo.Row masterRow = eDef.findByPrimaryKey(this.getDBTransaction(), <foreign-key>);
If the row does not exist, masterRow will be null.
findByPrimaryKey first checks the entity cache (which will include your new master row(s)) and then go out to database (if it's not in cache).
Thanks.
Sung

Validation while delimiting IT185

Similar Messages

Maybe you are looking for