Valuating audit results / questions

Hi, in ecc 6.0 qm, audit plan, audits were created, questions created against ea audit. pls advise how to valuate the each question of particulra audit? also advise is it mandatory to assign questions to each audit. in case if not mandatory, how to valuate the each audit? thanks in advance for helping me out.

Dear Yadav
Audits are valuated based on the question. So it is functionaly mandatory to attach question to all audits.
In the question make sure that you give in Valuation spec tab procedure and valuation profile
For valuating each question there is Valuation button just below the description . Make use of this and valuate all the questions
Regards
Gajesh

Similar Messages

Report License Audit Results online

Hi All,
One of my customer wants to have his system set to report the Audit Results online. Is this the same which SAP logs in to the customer systems and check the users and their allowed licences once in an year or so..??
Then what is this online submission? Please help.
Thanks
Vijay

Hi All,
This can be done by the transaction USMM where we have a button "Send to SAP" which will use the SAPOSS RFC Connection to send the audit data to SAP.
Thanks for all your help.
Regards,
Vijay

Audit Management: Question List (questionnaire)

Hello,
There is a scenario where a questionnaire is required to be created at the time of 'Opportunity Creation' in order to perform some checks. This is required to be incorporated within the opportunity flow. example: based on the asnwer in question the status of the opportunity would change.
In this context:
1. In configuration IMG --> CRM --> Audit Management --> Question List, there is a option "Question List". Could that be used for this purpose ?. If 'Yes' than Is it possible to use these questionnaire for other application then Audit Management ?
2. Is there a option to create a questionnaire in SAP-CRM (sales) and assign it to the opportunity flow ? how this can be achieved?
3. What can be the other approach options to achieve this functionality ?
Thanks in advance
/Manik

Hi Manik,
the question list you talking about is used for Audit management onyl.
There is hierarchy
Question list
Question element
questions
Niranjan
Award if useful

Admission audit - manual override of audit results

Hello -
Not sure if this is a config issue on our side or an SAP issue. When the users use the GUI to manually override a particular requirement from the original audit results ex: from 'not met' to 'irrelevant' and save, it works. However, as soon as an audit is executed again (which we want it to do a lot in case that last piece completes it) the manual overrides are wiped out and the original results are returned.
Did any one else have this issue? If yes, how did you fix it? Is there a way to keep our manual overrides? We followed the audit cookbook for our config.
thanks,
Denise

Hi Denise,
As Prabhat said this is the design of the framework, it checkes rules during the assessment run and is used as a bases to decide if there is a pass or fail on the rules. There is no hidden IMG entry to enable the overriding elements in the admission audit. This only works if you are intending to approve the admission directly after you override a rule (first save before you approve!).
We also encounter this requirement at Dutch universities and the need for manual override of rules too. There we used an automatic admission audit assessment run during the night which manual overriden the rules (got back to 'red' again, hence fail).
We 'solved' this by conducting a thorough investigation on the rules (content) and a re-design of rules to make them more rigid
OR more flexible. Plus for rules which really needed override capabilities we created a seperate tab in the Student File which provided the flexibility to overrride particular rules per open admission.
Due to this minor development effort we could keep the standard strenghts of the audt framework and we provide flexibility or overriding rules
br
Rob

Audit management - question list

Dear SAPIENTS,
      Does anyone have a document that helps us to record the replies for a question/ questions. Whether the questions, should be set as to give a yes or no answer.
      How and where to record the replies for the questions, bcoz after assignment of the question list only the "not relevant" check box is in modifiable status. The question is not displayed and I do not find any other place to make a tick for yes or no.
Regards,
Neeraja

Dear Gajesh,
      As per your suggestion, I created a valuation specification for yes / no type and created a coded valuation. For this type of questions, the valuation as 100 points for yes answer and 0 for no answer is displayed in the valuation tab of the questions.
     For other questions, where " Percentage Based confirmation is given as Valuation profile, with a valuation proposal as 80 / 60 and the calculation procedure for the question as " Valuation According to fulfilment and minimum 75, there is no valuation displayed ( i.e no of points / result calculated ) as proposed by the system. But the overall audit assessment is given as say 50% and audit failed, subsequent audit required.
Will the system not show the valuation result for each question. But the questions for which the minimum requirement has not been acheived is shown with the icon referring to " Question valuated. The result is worse than the minimum required result".
   1. Are we to enter the valuation no.of points to enter as the result of the question?
   2. How to upload a question list into the system from excel. It has been given as import can be through XML interface. In that case will the question be displayed in the questions assigned to the audit.
3. Currently, I have given the question in the description of the question, to be displayed in the question overview of hte icon. I think this is wrong, but otherwise the system shows only the description. The questions are not displayed.. How to display questions in the audit overview.
Regards,
Neeraja

"What Size" results question. How can I locate used GB not appearing on HD?

My Version Tracker "What Size" results are as follows:
/ - on disk 91.4 GB
Capacity 465 GB
Used 145 GB
Available 320 GB
71.1 GB Users
8.61 GB Applications
6.34 GB Library
2.67 GB username
1.43 GB System
I have about 30 GB of songs, 5 GB of Pictures, and 30 GB of movies. So I am confident that the "Users" total (71.1 GB) is in keeping with what I have used. (And Users, Applications, Library, username, and System all equal what is "on disk, 91.4 GB.")
What I am wondering is, how can I locate the unaccounted for 53.6 GB? (Which is 91.4 subtracted from the "Used 145 GB.")
I have been unsuccessful in finding any searches related to this subject that I can use. I found a couple about using Terminal, however, I would need step by step procedures for that.
Any ideas, articles, or threads anyone can point me to?

368/2814
Hi jpwill,
First of all, always keep in mind the double standard problem that prevents from being able to make straight, simple, easy counts. See:
- (KB article # 30065) Macintosh Hard Disk: Is It Missing Space?
Then, WhatSize should be run separately from each user account, as you cannot use it to spy on the others, it doesn't take into account the others' files.
Also: some system files like VM have a fluctuating size. Quit as many apps as you can and test if several measurements give different results.
WhatSize is able to show (one user's) every folder and every file. Use its different ways to show results, and detect the "strange" sizes firstly from what should be expected.
It is very possible that a file has grown huge for some reason.
Let us know if you have a question about some particular files!
Axl

Adobe Audition - podcast question

So I am a recent convert from Apple software to Adobe. I have previously used Garage Band to create podcasts that usually ended up around 7 MB in size. When I tried to create a podcast within Audition, the file size ballooned to 30 MB. How can I create one that will be closer to what I was doing in Audition? Thanks!

Audition saves to its native format, which is wav. And that's why you've got such a large file - wavs are uncompressed. I'm presuming that you want your final result to be an MP3 file if it's for a podcast, so you have to pick Save As, and in the file types box pick MP3. You then get to choose the particular MP3 format you want - judging from the size comparison you've made this will probably be 128k stereo.

Logging step results question

I'm using the sequential process model which includes database logging. I've modified the database schema and I am using my own insert statement. I'm trying to use the step results logging feature. I have 2 questions\issues I need help on:
First Issue:
I've created an insert statement and specified it to apply to a step result. When I look at my database results table, it appears that I get an extra entry in addition to my step results. I've disabled logging on all steps in my mainsequence except for 1 step so I know I should only see 1 database entry, however I see 2 entries. Even if I disable logging on all steps, I still get a single database entry when in fact I should see nothing. This is strange.
Second Issue:
In the above sql statement I retrieve my step results for each field this way:
Logging.MainSequenceResults.TS.SequenceCall.ResultList[0].CurrentFilepath
Logging.MainSequenceResults.TS.SequenceCall.ResultList[0].VoltageFilepath
Logging.MainSequenceResults.TS.SequenceCall.ResultList[0].VoltageMode
Logging.MainSequenceResults.TS.SequenceCall.ResultList[0].VoltageValue
Logging.MainSequenceResults.TS.SequenceCall.ResultList[0].ResistorValue
However, this is not flexible because if I change the location of the step, then the index will change. Also, if I need to loop on this step it will have the same problem. Is there a way to get this data in a more generic way?
Michael Aivaliotis
VI Shots LLC

Well, I solved my other issue as well.
I ended up using:
Logging.StepResult.VariableName
This seems to do it!
Michael Aivaliotis
VI Shots LLC

Global Object Access Auditing test question

Hello!
There's a test question (N4) I'd like to have clearified:
http://exam.test4actual.com/70-411.pdf
Yes, D and F will enable auditing with no extra replication traffic, but enabling Global Object Acces Auditing will lead to auditing not only SYSVOL shares but to any others as well (http://blogs.technet.com/b/askds/archive/2011/03/10/global-object-access-auditing-is-magic.aspx)
- is this replication traffic worth it???
Thank you in advance,
Michael

Hi,
For this question, the correct answer is DF, but we do not need to use Global Object Acces Auditing policy to audit SYSVOL shares.
About the replication traffic, please refer to:
http://technet.microsoft.com/en-us/library/bb742457.aspx
Meanwhile, any changes made to SYSVOL are automatically replicated to the other domain controllers in the domain. If the files stored in SYSVOL change frequently, the replication increases the input and output for the volume where SYSVOL is located. For
example, editing a GPO can potentially force a GPO-level replication. If the volume is also host to other system files, such as the directory database or the pagefile, then the increased input and output for the volume can impact the performance of the server.
More detail information:
Introduction to Administering SYSVOL
http://technet.microsoft.com/en-us/library/cc778037(v=WS.10).aspx
Regards.

Security Log Event ID 4624 Auditing - Few Questions

I am working on a PowerShell script that collects Event ID's 4624 with LogonType 10 (Logon) and Event ID's 4647 (Logoff). This is basically keeping an audit trail of logon's and logoff's of users on our terminal services environment.
This is working as expected, however, I am seeing two things that I have remaining questions on:
For the Logon Event ID 4624...for a few users, I am seeing two Logon Event's created. They are exactly the same, except one has a LogonGuid of all 0's : {00000000-0000-0000-0000-000000000000}.
Why would there be two Logon events created where one of them has a LogonGuid of all 0's? For the correlating Logoff event, it is tied to the Logon Event with the all 0's LogonGuid. I would expect the logoff event to
be ties to the LogonGuid that isn't all 0's.
If a user disconnects (not logoff), and when they logon again, another logon event is created. Is there anyway to decipher from a completely new logon event and from a logon event to resume a disconnected session?

Hi mabrito,
I assume you meeting the following scenario event.
When a user logon, two events get logged with event id 4624. the only difference between them is followings:-
Logon GUID:
{00000000-0000-0000-0000-000000000000}
Logon GUID:
{user GUID }
Logon GUID: {00000000-0000-0000-0000-000000000000} is for anything other than Kerberos, Logon GUID is a unique identifier that can be used to correlate this event with a KDC
event.
You can refer the following article:
Deciphering Account Logon Events
http://blogs.msdn.com/b/ericfitz/archive/2005/08/04/447934.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Service Offering, Query Results question.

Hi,
I got a question about the Service Offering, Query Results criteria page.
As shown in the Picture below i have a Query based on the Active Directory User Class.
The background is that i got alot of accounts more than 2000. The token "String" is used to narrow down the search. I also got some accounts that i dont want to show in the portal for the end users (The ones who
ends with "Z" in the pager).
Generally i would say that the "OR" would be "AND" (due to it is an logical operator, i want both conditions to be true) between the two UserPager properties, but i havent found any way to change that. I suspect that it is not possible
to change "OR" to "AND" when making criterias against the same values more than 1 time.
The Query below will return all accounts under that Distinguished name, even if i wrote something in the String prompt. Removing the Criteria Pager ends on "Z" makes the String prompt work. But it will not exclude those objects ending with
Z. Is this a normal behavior or am i thinking/doing sometime wrong?

This is how all criterias work in service manager. If the same property is included more than once it puts an OR inbetween. You would have to export the MP that contains the query result and edit the criteria manually to AND.
Cheers,
Anders Spælling
Senior Consultant
Blog:
Twitter: LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

OEM Query Results Question

Hi..
I am working on a query to display the last 30 days of uptime for our databases. This is the query:
select availability_status, target_name, target_type, end_time - start_time from (select availability_status, target_name, target_type,
nvl(end_timestamp, sysdate) end_time,
case when start_timestamp < sysdate -31 then sysdate -31
else start_timestamp end start_time
from MGMT$AVAILABILITY_HISTORY
where nvl(end_timestamp, sysdate) > sysdate -31
and target_name ='FSPERF11')
I get the results below:
AVAILABILITY_STATUS TARGET_NAME TARGET_TYPE END_TIME-START_TIME
Agent Down FSPERF11 oracle_database 0.006
Target Down FSPERF11 oracle_database 0.003
Target Down FSPERF11 oracle_database 0.001
Target Up FSPERF11 oracle_database 2.91
Target Up FSPERF11 oracle_database 10.803
Target Up FSPERF11 oracle_database 0
Target Up FSPERF11 oracle_database 17.27
The question I have is why do I have multiple results when I am only looking for database uptime/downtime? Why do I have 3 Target Up results?
Thanks...

Thanks! When I collect the SQL it gives me an invalid SQL statement error when I go to run it. This is the SQL listed:
SELECT sum(Avail) OVERALL_AVAILABILITY_PER_ID , sum(T_Uptime) TOTAL_UPTIME_HRS_ID , sum(T_Downtime) TOTAL_DOWNTIME_HRS_ID , sum(T_Blackouttime) TOTAL_BLACKOUT_TIME_HRS_ID, sum(T_Unmonitoredtime) TOTAL_UNMONITORED_TIME_HRS_ID from(
select 0 Avail, 0 T_Uptime, 0 T_Downtime, 0 T_Blackouttime, 0 T_Unmonitoredtime from dual UNION ALL
SELECT round( st_dur.tgt_up/(decode(st_dur.tgt_up+st_dur.agent_down+st_dur.tgt_down,0,1,st_dur.tgt_up+st_dur.agent_down+st_dur.tgt_down))*100,2) Avail
,round((st_dur.tgt_up*24),2) T_Uptime, round((st_dur.tgt_down*24),2) T_Downtime, round((st_dur.blackout*24),2) T_Blackouttime, round(((st_dur.agent_down+st_dur.metric_error+st_dur.pend_unknown+st_dur.unreach)*24),2) T_Unmonitoredtime
FROM (
SELECT SUM( decode(AVAI_STATUS,'agent down',DURATION,0)) agent_down,
 SUM(decode(AVAI_STATUS,'blackout',DURATION,0)) blackout,
 SUM(decode(AVAI_STATUS,'metric error',DURATION,0)) metric_error,
 SUM(decode(AVAI_STATUS,'pending/unknown',DURATION,0)) pend_unknown,
 SUM(decode(AVAI_STATUS,'target down',DURATION,0)) tgt_down,
 SUM(decode(AVAI_STATUS,'target up',DURATION,0)) tgt_up,
 SUM(decode(AVAI_STATUS,'unreachable',DURATION,0)) unreach FROM(
 SELECT LOWER(A.AVAILABILITY_STATUS) AVAI_STATUS
 ,ROUND(least(nvl(A.end_timestamp,(CAST(systimestamp at time zone B.TIMEZONE_REGION AS DATE))), MGMT_VIEW_UTIL.ADJUST_TZ(??EMIP_BIND_END_DATE??,??EMIP_BIND_TIMEZONE_REGION??,B.TIMEZONE_REGION) )
 -greatest(A.start_timestamp,MGMT_VIEW_UTIL.ADJUST_TZ(??EMIP_BIND_START_DATE??,??EMIP_BIND_TIMEZONE_REGION??,B.TIMEZONE_REGION) ),4) DURATION
 FROM mgmt$availability_history A,MGMT$TARGET B WHERE A.target_guid=??EMIP_BIND_TARGET_GUID?? AND A.TARGET_GUID=B.TARGET_GUID
 and A.start_timestamp>=(select min(NVL(end_timestamp,(CAST(systimestamp at time zone B.TIMEZONE_REGION AS DATE)))) from mgmt$availability_history where target_guid=??EMIP_BIND_TARGET_GUID?? )
 and ((A.start_timestamp>MGMT_VIEW_UTIL.ADJUST_TZ(??EMIP_BIND_START_DATE??,??EMIP_BIND_TIMEZONE_REGION??,B.TIMEZONE_REGION) AND NVL(A.end_timestamp,(CAST(systimestamp at time zone B.TIMEZONE_REGION AS DATE)))<MGMT_VIEW_UTIL.ADJUST_TZ(??EMIP_BIND_END_DATE??,??EMIP_BIND_TIMEZONE_REGION??,B.TIMEZONE_REGION))
 OR(MGMT_VIEW_UTIL.ADJUST_TZ(??EMIP_BIND_START_DATE??,??EMIP_BIND_TIMEZONE_REGION??,B.TIMEZONE_REGION) between A.start_timestamp AND NVL(A.end_timestamp,(CAST(systimestamp at time zone B.TIMEZONE_REGION AS DATE))))OR
 (MGMT_VIEW_UTIL.ADJUST_TZ(??EMIP_BIND_END_DATE??,??EMIP_BIND_TIMEZONE_REGION??,B.TIMEZONE_REGION) between A.start_timestamp and NVL(A.end_timestamp,(CAST(systimestamp at time zone B.TIMEZONE_REGION AS DATE)))))
)st_dur)
What do the "??" represent and how do I get it to run?
Thanks again...

cache-query-results question

I have another post for general descriptor tag information but I do have a specific question. In a project I am looking at I see:
<cache-usage> check cache by primary key </cache-usage>
<cache-query-results>false</cache-query-results>
<maintain-cache>true</maintain-cache>
I'm not sure how to interpret this. Does this mean that a cache is in place or not? cache-query-rests is set to false which implies no caching, yet the other parameters imply a cache is in place. What overrides here?
Thanks

The XML maps directly to the API so the JavaDocs and related documentation are the best tools:
cache-usage: query.setCacheUsage(int)
This option indicates how the object cache should be used when processing the query. This is how in-memory query is configured as well as support for cache-hits on ReadObjectQuery.
cache-query-result: query.setShouldCacheQueryResults(boolean)
This option allows you to indicate that the results returned from the query execution should be held. When the query is executed again these results will be returned without going to the database or searching the object cache. This is just caching the results locally within the query.
maintain-cache: query.maintainCache() or query.dontMaintainCache()
This setting determines if the results returned from the query should be cached in the shared object cache. It is on by default and turning this off is very rare. Occasionally done to compare the cache version with the database verision when handling an optimistic locking failure.
Doug

Captivate 5 Survey Result Question

We are trying to create a Survey in Captivate 5 which will not report out to LMS. I am trying to find a way to get the Survey results (2 Question per slide 18 questions total) to display to the learners. For instance, Slide 1 is A) B) question, slide 2 is 1) 2) question and then starts back with A) B) on Slide 3. I need a total of A) B) 1) 2) for the learners. We are using this in place of a handout if possible. I would assign 1 point for each question and then have them tally at the end for the learners.
Let me know if anyone has any thoughts. I have searched the forum and did not find anything similar. I appoligize in advance if this is answered somewhere else.

Hi Lilybiri,
I can see the confusion. We are not scoring in the sense that this is pass/fail. What we want to do is have the answers tally for the learner. The goal is that if you received 5 - A)'s, 3 - B)'s, 2 - 1)'s and 1- 2)'s those results would display. So if I have a questions such as below:
1. Please pick which best describes you:
A) Easy to work with
B) Difficult to work with
2. Please pick which best describes you:
1) Task oriented
2) Free thinker
The answers selected would then tally up at the end for the learner. The questions repeat with different choice selections between A) B) and 1) 2).
Does that help explain what I am look at doing?
Thanks,
Nicole MacVey-Bogard
Instructional Designer | Enabling Areas Talent Development
Deloitte Services LP
Main: +1 800 335 6488 | Direct: +1 615 882 6642 | Fax: +1 615 750 6642
[email protected] | http://www.deloitte.com
This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is
protected by law. If you are not the intended recipient, you should delete this message.
Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.
v.E.1

Portal Custom Search Results Question

Hey,
We are using a custom search portlet to search through a page group containing content relevant to a group of end users. The results generated from the search a fine apart from that they also return items from the page group such as navigation pages or templates. So, when the user searches for a given simple keyword they get some pages and some navigation pages which would obviously be a little confusing.
How can we restrict the results in to being just pages ?
Cheers,
Mark

Mark
I don't have details of your content and it's attribution and structure, but it's possible with the custom search portlet to add search criteria to your search portlets that are hidden from the user. You can use this to place additional restrictions on the queries that filter out the extraneuous results, unbeknownst to the end user.
Thanks.

Valuating audit results / questions

Similar Messages

Maybe you are looking for