Value mapping in file

Hello,
I've a interface RFC to File (.txt).
The name file is dynamic. In message mapping we have a target field only for file name (i haven't can mapiing with other fields because all target fields are mapping with source fields).
My problem is file name appears in content of file and i don't want this.
What can i do?
Thanks very much.

Hi dear,
Use the Dynamic config. method because I also faced this prob in variable substitution method.
Use the UDF in mapping as shown here.
public String Set_Output_File_Name(String var_Filename, String var_Directory, Container container) throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(key, var_Filename);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
conf.put(key1, var_Directory);
return "TRUE";
Here var_Filename = Pass Filename from the source field
var_Directory = Pass Directory name from the source field
In Mapping:-
output of this UDF is to mapped with one of the Target field say(TEMP) with occurce 0..1.
since this UDF always return TRUE in the output so use the Graphical function 'equalsS' which compares the output of this UDF with some value like '1234'. and then use the IF--without Else Graphical function and then map with the TEMP so it never be generated in the target message.
Set the Adapter specific message attribute property for the File receiver adapter.
Regards
Jagesh

Similar Messages

File to File using BPM & value mapping

Hi,
   I have the following scenario to do. sample file structure is given below.
source:
HDR   13052008INDIA
BDY   123456
BDY   1234567
EOF
Target:
HDR 2IN BDY 123456 EOF
HDR 2IN BDY 1234567 EOF
for the above mentioned source and target mapping. we have to use BPM and value mapping.
In the HDR row 13052008 is the date value this has to be passed to RFC function module and it will return 2, this value has to be mapped to target
And INDIA has to be mapped to IN using the value mapping option. similarly we have many coutry code.
could anyone let me know the step by step procedure to achieve this, I followed the blog https://weblogs.sdn.sap.com/pub/wlg/1926. [original link is broken] [original link is broken] [original link is broken] but it does not fit to my scenario.
help is appreciated.
Regards
RDS

Hey,
     This is a normal file to file scenario.
     You need to use RFC look up instead of value mapping.(as you need to extract 2 and IN from an RFC)
There is no need for a BPM.
refer to this blog(for RFC look up)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
this will solve your problem.
Output of RFC look up will be 2 and IN . So use the concat function.
Other values map them directly from source to target.
Also, set the occurence for the target structure as 0 to unbounded in the mapping.(this is to be done in order to have one file for each record of the source)
You also need to configure file content conversion.(both at sender and reciever side) to convert the text file to XML on the sender side and then XML to text at the reciever side.
refer to this link for FCC.
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
This is for sender file content conversion.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
This is for reciever FCC.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
reward points if useful.
regards,
       Milan

Domain Value Mapping with Text file

Hai,
I have done the Domain value mapping with the xml file to xml file and it is working fine.
But in the case of Text file to Text file it is not working i.e. If the citiname is the
first field it is domain value mapping and working fine.
INPUT:
Erode, Mahes, 22
Coimbatore, Veera, 22
OUTPUT:
ED, Mahes, 22
CBE, Veera, 22
But if I change the Citiname to the second column it is not working the problem is
it is not working for subsequent columns.
INPUT:
Mahes, Erode, 22
Veera, Coimbatore, 22
OUTPUT:
Mahes,, 22
Veera,, 22
The input Text files are delimited by "comma" and optionally enclosed by "space".
Does anyone have attained the DVM in the Text file successfully.
Please help me.

Thank you for the reply Abhi
Text to Text means instead of giving the input file as XML file i am giving the input as a simple .txt file and I also want the output in the .txt format.
For the text file only it is not working fine in the xml file to xml file it is working fine.
For your another query I am not providing the correct parameters for "lookup-dvm"
I am giving the xsl file
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="TextInput1.wsdl"/>
<rootElement name="Root-Element" namespace="http://TargetNamespace.com/TextInput1"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="TextOutput1.wsdl"/>
<rootElement name="Root-Element" namespace="http://TargetNamespace.com/TextInput1"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns0="http://www.w3.org/2001/XMLSchema"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:imp1="http://TargetNamespace.com/TextInput1"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/TextInput1/"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/TextOutput1/"
exclude-result-prefixes="xsl plt pc ns0 jca imp1 tns hdr ns1 bpws ehdr hwf xp20 xref ora ids orcl">
<xsl:template match="/">
<imp1:Root-Element>
<xsl:for-each select="/imp1:Root-Element/imp1:Leaf-Element">
<imp1:Leaf-Element>
<imp1:C1>
<xsl:value-of select="imp1:C1"/>
</imp1:C1>
<imp1:C2>
<xsl:value-of select='orcl:lookup-dvm("Citinames","Long",imp1:C2,"Short","")'/>
</imp1:C2>
<imp1:C3>
<xsl:value-of select="imp1:C3"/>
</imp1:C3>
</imp1:Leaf-Element>
</xsl:for-each>
</imp1:Root-Element>
</xsl:template>
</xsl:stylesheet>
Here I am checking the DVM function for the Second column and it is not working and I have given their Inputs and Outputs in my first message .
I have another question as you told both import and export of the DVM is always in the XML format only so I have a doubt whether the lookup-dvm will be working for xml files only and not for text files.
But in my case in text file it is working for the first column but not in the subsequent columns.
Thanks.

Partial match for Value Mapping in Import Manager

Hello Experts,
We have a import map which is used to do mass insert of data into the main table. This is done as & when required by the end user.
We have a qualified lookup field which has a flat lookup filed as the Non-Qualifier. This flat lookup field is refering to a Lookup Flat table, which has mulitple dispay fields like Code,Name, Status etc. (14 fields in total) where as only the Code is the unique field.
We have only the unique field in our source file which we use for the import. Since we have only a part of the display fields in the source, the automap functionality in the Value maping section doesn't work. It becomes very tedious for the user to manually map all the values for this field.
Is there any way by which we can convert the source or target values in the import map, so that we can map the values using the Automap feature?
Your help & suggestion for alternate approach is highly appreciated.
Thanks in advance.
Regards,
Uday
P.S. We are using SAP MDM 5.5 SP6.

Hi Uday,
No need to enable remote key mapping for QLT. Please execute the below steps(stated with an example) -
1. Among all the fields in the referenced lookup table, identify the lookup fields and the tables they are looking up .
For eg.If you have a lookup field as 'Country' as one of the fields, look up table will be 'Countries'
2.For the identified lookup tables, set 'key mapping =Yes' in Console.
For eg, For Country Lookup table ,set Key mapping to 'Yes'
3.Import values into Lookup table (Import manager)/ Remote key update -
In import manager, select source (local file) and destination as Countries flat table.This Table will be haing 2fields - Code and description.Clone the 'Code'field and map it to Remote key field in destination hierarchy.Map code and description to equivalent destination fields. Select 'Code' as matching field > Perform import into lookup table.
Check if the records in countries table are updated with remote keys(in Data manager> right click on a record> select 'Edit key mappings' > view key mapping for the record)
3.Import to Qualified table/Auto value mapping -
Now, in the import map for qualified import , map the source field and destination field (of lookup type), all the values of this field will automatically map.
Similarly, refresh remote keys mappings for all the lookup tables first and then you can see auto mappings of values happening for the lookup fields.
Regards,
Vinay M.S

Value Mapping in Import Manager

Hi All,
I have Probelm while loading data to MAIN TABLE through Import manager,I am getting XML file from Legacy System in which legacy sends State Code like NM (for New Mexico) .In my region table I made Name and Code as display field .Created my Import map ,when ever new value comes for region value mapping is not working ,I tried changing my region table with code only display field it works ,but I want Name also display field .
Note : all my lookup table Remote key mapping Enabled
Is there any way we can acheive this or am I missing some thing here .
Thanks,
Madhu

Hi Madhu,
to achive this:
1. First go to the table where you are maintaining the region codes.
2. Enter the region code there and then go to the import manager by connecting to the source file.
3. go the region field map by opening the map.
4. go to value mapping pane and select unmap.
5. then select Automap and check the that your region code added manually is mapped with the source file.
6. You may see some unmapped source values, map it to Null values at destination.
7. Save the map.
8. This shoul enable the import for you.
if you want to avoid the manual mapping everytime, you should be getting all the region codes once and import/update it in the data manager as a one time job.
Then you avoid steps 1 to 3 everytime and carry out the remaining steps to import the records.
Hope this helps resolve the issue.
Thanks
Rahul

How to read Group ID from Value Mapping Context in Cache Monitoring ?

Hi friends,
    In RWB --> Cache Monitoring --> Integration Server (Java) -> (Search for Value Mapping Groups) in this each item is identified by Value Mapping Group (GroupID, Context, Identifier/Agency, Identifier/Scheme). Either we create Value Mapping Table in ID or replicate value mapping data directly from text file/SAP table etc., in run time cache, data will be identified in this manner.
    Now, our requirement is to delete a record the Cache for a particular context. Two operations provided by XI one is 'Delete' and another one is 'DeleteGroup'. When we use either of this, we should know GroupID. Suppose, I replicated some large amount of data from my text file in Runtime Cache. Value Mapping Table is like that IN --> India, US --> USA, AU --> Australia, EG --> Egypt. Now, I am required to write a program to get the input country code from user which is going to delete in the value mapping table like IN/AU.... For this, what logic we should follow in the program is, First we scan the value mapping table and find the record (country code) which is match with the input. Then find the GUID value for this record. Now we use the DeleteGroup Operation and pass this GUID and then delete the record.
    So, in essence, how to read the GUID from value mapping context.
    Friends, Kindly help me to do this.
Thanks in advance.
Jegatheeswaran P.

Did you get the way to read group id?

Value Mapping through Tables in R/3 from XI

Hi All,
I'm new to XI and got a scenario as "Value Mapping through Tables in R/3 from XI". Kindly do tell me the steps which I should follow to complete this scenario. I'm from ABAP so table creation is known to me, what next should I do after table creation?
Thanks in Advance to all of you,
Sreedhar

sree,
value mapping are done using message mapping. In message mapping you have to make a RFC call to query the db and get the response. were you have to write a java function in mapping program.
check this blog, it speaks on value mapping
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i

SFTP sender to File receiver mapping of file names

My scenario is: sender channel = SFTP (Seeburger) transferring multiple PDF files to Receiver adapter File (NFS).
These PDF files need to have the same name as the original files from the sender (3rd party) system.
Because these files are being processed without an interface, I can't use UDF to help map the file names.
I've tried using Seeburger's localejbs/Seeburger/AttribMapper to map the names, as follows:
File (NFS) receiver channel config:
- ASMA boxes for 'Use Adapter-Specific Message Attributes' and 'File Name' are ticked
- Module localejbs/Seeburger/AttribMapper is on the first line in the module tab under processing sequence, with module key = AttributeMapper
- Under Module Configuration:
- Module Key = AttributeMapper
- Parameter Name = http://sap.com/xi/XI/System/File/FileName
- Parameter Value = @http://seeburger.com/xi/SFTP/dtSubject
(I haven't entered any attribute module config on the sender side)
This setup fails on the receiver side with the message 'Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Channel stopped by administrative task.' (not very helpful!). All I can get from that is that it doesn't like my module configuration!
Can anyone help me understand the correct way to do the file name mapping for my specific scenario?
Regards,
Christine

We've got this working at last!
The main problem was indeed the missing .sca file from Seeburger: SeeModuleCollectionPI.sca
Our Basis team deployed this file this morning. After a bit of fiddling around with the attribute mapping, my test files were transferred successfully with their original names.
The config I ended up with is just as described in another forum post for SFTP to FTP, but I'll repeat it in more detail here:
Sender channel
Parameters tab:
Adapter Type = SFTP (Seeburger)
(sender, transport & message protocol = SFTP)
Scheduler = x in all appropriate days, with interval = 1 (minimum allowed)
(rest here is specific to your environment, but I set filename to *.pdf to get all .pdf files from the sender)
Module tab
Processing Sequence
Number Module Name                                          Type                                          Module Key
1            localejbs/Seeburger/AttribMapper          Local Enterprise Bean     AttribMapper
2            localejbs/Seeburger/solution/sftp           Local Enterprise Bean     solutionid
3            localejbs/CallSapAdapter                   Local Enterprise Bean     exit
Module Configuration
Module Key        Parameter Name                                               Parameter Value
AttribMapper          http://sap.com/xi/XI/System/File/FileName         @http://seeburger.com/xi/common/dtSubject
Receiver Channel
Parameters tab:
Adapter type = File
(receiver, with transport protocol File System (NFS), etc)
Target tab:
Target directory (set to your required PI server directory)
File Name Schema = * (can be anything, will be ignored)
Processing tab:
(your requirements-specific settings - mine were create, write directly, file type binary)
Advanced tab:
Under Adapter-Specific Message Attributes (ASMA):
tick the following:
Use Adapter-Specific Message Attributes
Fail If Adapter-Specific Message Attributes Missing
File Name
Modules tab:
Processing Sequence
Number Module Name                                          Type                                          Module Key
1            CallSapAdapter                                       Local Enterprise Bean     0
(nothing under Module Configuration)
Thanks to those who kindly took the time to try and help me, your suggestions pointed me at the real problem.
Christine

Java.io.IOException: unable to find the type mapping resource file

Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web service and
was able to deploy it sucessfully. I am trying to access the web service through
a jsp page. I am the error posted below on my server and " error:505 internal
server error" on the browser. Can any one please help me out with the problem.
My jsp page just displays the float value i am returing from the session bean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Hi Manoj,
Thanks a lot for your hepl. I tried as you said and its working now.
Ramya
"manoj cheenath" <[email protected]> wrote:
Make sure that you put the client jar file generated by
clientgen in the lib directory of the jsp web app.
It looks like the runtime is unable to load
<service>.xml type mapping file. This xml file
should be in the classpath (web-inf/lib or
web-inf/classes).
-manoj
"Ramya" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
was able to deploy it sucessfully. I am trying to access the web servicethrough
a jsp page. I am the error posted below on my server and " error:505internal
server error" on the browser. Can any one please help me out with theproblem.
My jsp page just displays the float value i am returing from the sessionbean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page
ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Value mapping in xslt mapping

Hi,
I have 2 mapping program one is main .xsl program and other one is value mapping program .xsl .
I have zipped both the program and imported into Imported archive in IR but while testing in interface mapping i am getting error.
error:could not compile xslt stylsheet.
Some of the interface having one .xsl program and value mapping is also defined in the main program itself,these interface i am able to execute successfully but unable to execute wherever there are 2 program (main prog + value mapping).
It seems that value mapping is not loading / executing.
Can anyone please guide me how to call value mapping using xslt mapping?
Thanks,
Subbu

Hi Prateek,
Thanks for the response.
Yes i have 2 program and both needs to execute in one interface mapping.
First program (main) is MappingMOAPS_SAVEMULTIPLE2013.xsl and second program i.e (value mapping) MO_vmf.xsl.
From main program itself value mapping program is called.
Please look below code for main & value mapping prog.
In main prog this is the parameter (<xsl:import href="MO_vmf.xslt"/>) where value mapping prog name is mentioned.
I have already zipped and imported but while testing in interface mapping it is giving error that "could not compile xslt stylsheet".
Could you plaese tell how to check or make XSL to accommodate multiple mappings?
Main mapping : MappingMOAPS_SAVEMULTIPLE2013.xsl --
<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:vmf="http://www.altova.com/MapForce/UDF/vmf" exclude-result-prefixes="vmf xs xsi xsl">
     <xsl:import href="MO_vmf.xslt"/>
     <xsl:output method="xml" encoding="UTF-8" indent="yes"/>
     <xsl:template match="/PPR">
          <MOAPS_SAVEMULTIPLE201>
               <IDOC>
                    <EDI_DC40>
                         <xsl:for-each select="SI_ID_IDOCS">
                              <xsl:for-each select="ID_TABNAM">
                                   <TABNAM>
                                        <xsl:value-of select="."/>
                                   </TABNAM>
                              </xsl:for-each>
                         </xsl:for-each>
                         <xsl:for-each select="SI_SP_SAP_PARTNER_INFO">
                              <xsl:for-each select="SP_MANDT">
                                   <MANDT>
                                        <xsl:value-of select="."/>
                                   </MANDT>
                              </xsl:for-each>
                         </xsl:for-each>
                         <xsl:for-each select="SI_ID_IDOCS">
                              <xsl:for-each select="ID_DIRECT">
Value mapping : MO_vmf.xsl:
<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:vmf="http://www.altova.com/MapForce/UDF/vmf" xmlns:xs="http://www.w3.org/2001/XMLSchema" exclude-result-prefixes="xs xsi xsl">
     <xsl:template name="vmf:inputtoresult">
          <xsl:param name="input"/>
          <xsl:choose>
               <xsl:when test="$input='01'">
                    <xsl:value-of select="'PM1C'"/>
               </xsl:when>
               <xsl:when test="$input='02'">
                    <xsl:value-of select="'PM2C'"/>
               </xsl:when>
               <xsl:when test="$input='03'">
                    <xsl:value-of select="'EXT3'"/>
               </xsl:when>
Regards,
Subbu

Error in Domain value mapping.

Dear all,
I was trying a simple file to file scenario using ESB with the Domain value mapping(DVM).
I was trying to replace the incoming long state codes with the short keywords.
I was using the DVM to configure the field to be changed in the XSL map.
I have also configured tracking fields for Routing service and the Outbound adapter in the ESB Console.
But after the instance the long names are not replaced with short keywords it come as blank in the place of names.
In the ESB console the RS is tracking the fields and the outbound adapter not. I was using a simle text file which has two columns Andrew, Bangalore delimited by comma and optionally enclosed by space.
Please help me.

Thanks for the reply Chintan,
Yes it is not working, I was doing the esb-customerdvm.pdf sample DVM as specified in the following link
http://www.oracle.com/technology/products/integration/esb/files/esb-customerdvm.pdf
My map also has three columns and I was the specifying Map name, Source column name as "Long" and the target column name as "Short" and the default value as "" in the lookup-dvm function in the XSL stylesheet.
And I have also specified the trackable fields for the Routing service and the Outbound adapter in the ESB Console but after the instance only the RS shows the tracked data and the Outbound adapter doesnot and it shows Nodata.
When I give the Input as the text file with columns Prasath, Chennai in the output file the Prasath is only coming what I expect is Chennai should be replaced by its short name CH but it is not coming like that.
Here I also specify the coding of XSL Stylesheet map.
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="DVMapsInput.wsdl"/>
<rootElement name="Leaf" namespace="http://TargetNamespace.com/DVMapsInput"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="DVMapsOutput.wsdl"/>
<rootElement name="Leaf" namespace="http://TargetNamespace.com/DVMapsInput"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:imp1="http://TargetNamespace.com/DVMapsInput"
xmlns:ns0="http://www.w3.org/2001/XMLSchema"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/DVMapsInput/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/DVMapsOutput/"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/file/"
exclude-result-prefixes="xsl plt pc imp1 ns0 jca ns1 hdr tns bpws ehdr hwf xp20 xref ora ids orcl">
<xsl:template match="/">
<imp1:Leaf>
<imp1:C1>
<xsl:value-of select="/imp1:Leaf/imp1:C1"/>
</imp1:C1>
<imp1:C2>
<xsl:value-of select='orcl:lookup-dvm("Citycode","Long",/imp1:Leaf/imp1:C2,"Short","")'/>
</imp1:C2>
</imp1:Leaf>
</xsl:template>
</xsl:stylesheet>
Please help on this.
Thanks.

Error in Value Mapping Replication

Hi
I am trying to upload a flat file to value mapping table using the standard interface given by SAP. I am getting the error ' HTTP_RESP_STATUS_CODE_NOT_OK' in message monitoring.
I have already registered the interface on the proxy and is successful and created adapter on reciever side for java proxy as stated in the documentaion. on the reciever side I craeted a business service as reciever of interface 'ValueMappingReplication' and communication channel that I created for java proxy input.
Any thing I am missing ? Any help willl be appriciated.
Thanx & regards
Vinod ahir

Check if you have trailing spaces in the communication channel. If so, remove them.
Check the port number of the URL which leads to the Java Proxy. It has to be the J2EE port.
Regards
Stefan

Is graphical mapping best for a large IDoc mapping to file?

Hello,
I have to map an IDoc to a file and 450+ lines are mandatory or needed to go a file output. A lot of the lines need some value mapping. Is XSLT or Java mapping better for this task?
John Xi

Hi,
If you require to do a lot of lookups and for large payloads, it would make sense to go for a Java mapping as in this case it would improve performance to some extent.
For large messages, please refer the follwong link to improve system performance.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7?quicklink=index&overridelayout=true
Regards

Dynamic value mapping

hi,
can u plz explain about Dynamic value mapping and where it actually use this
thanks
guna

Hi ,
Dynamic value mapping.is nothing but
It is FixValues and ValueMapping under Conversion Functions.
Eg:
You need such a requirement. Where the values in the source are mapped to someother value in the target as below.
1--> Mr
2--> MS
3--> MRS
FixValues is used when you know the entire set of Key value pair in the Design Time. You give the Key and the value in the FixValues and the mapping checks and maps the values to the target.
In the case of Value mapping, you maintain this Key - Value pair in the Integration Directory and thereby make changes easily and also use them in the Mapping in IR
Refer These blogs
ValueMapping using the Graphical Mapping Tool -value mapping using grapic mapping tool
Value Mapping replication - value mapping replication
Accessing Value Mapping defined in Directory using Java functions - accesing value mapping
Dynamic Date Conversion in Message Mapping - dynamic date conversion
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping - dynamic confighuration
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II - dynamic file name
and also
Refer this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/d7/e551cf896c3a49bb87bb4ce38c99c8/frameset.htm - external context mapping
Regards,
Suryanarayana

Cache not updated on Value Mapping Replication PI 7.1

Hi,
I already configure an scenario to do Value Mapping Replication on PI 7.1
I am sending the xml file thru an HTTP client and it seems to go all the way down. I have a "Processed Successfully" status in the moni but the thing is that I can not see any difference in the Cache at the RWB.
My receiver agreement uses the ValueMappingReplication interface to a CC of type XI.
Any ideas on what could be wrong?
Thanks in advance.
Luis

Hi Udo,
Your reply pointed me to the right direction.
In the RWB I found out that my group-id was in the wrong format, so to be sure, I used a function module called /OSP/GET_GUID. That way I generate a correct 32-bit group-id.
Now it works.
Thanks.
Luis.

Value mapping in file

Similar Messages

Maybe you are looking for