Value not found in allowed list of options for field...

Hi,
I'm using RIDC on UCM 11g in order to checkin contents.
UCM hosts different projects.
I've the following problem: if somebody (from a different project) insert a new Information Field (e.g. xAnnoPubblicazione) of type Integer - Option List - Select List Validated and it does not make a default value for this field, when I perform checkin using RIDC, it fails with the error:
"oracle.stellent.ridc.protocol.ServiceException: Content item 'UCMRE010132' was not successfully checked in. Value not found in allowed list of options for field 'xAnnoPubblicazione'.
How can I solve this issue? what's the recommended way?
Thank you very much.
Best regards,
S.

In the database language, you have created a NON NULL column and you are trying to insert a record with NULL value to the column. Of course, it cannot work.
There are three options:
- do not declare the field as NON NULL (that is, you option list has to contain 'blank' as a possible value)
- provide the value on insert
- provide the default value

Similar Messages

Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed prop

Hi,
My application was working fine some time back. I am not sure what has changed.I am receiving following error :
A message received by adapter "FILE" on receive location "FILE Edi_Receive_Location_EANDIS" with URI "C:\AMR46783\OUT\*.edi" is suspended.
Error details: There was a failure executing the receive pipeline: "Umix.Van.Pipeline.Custom_Receive_BackupEdi_Pipeline, Umix.Van.PipelineModule, Version=1.0.0.0, Culture=neutral, PublicKeyToken=7e83b13ccba9e75d" Source: "EdiDecoder" Receive Port: "FILE_Custom_Receive_Port" URI: "C:\AMR46783\OUT\*.edi" Reason: Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly.
Any help would be appreciated.

When using custom or 3ed party Adapter you might receive this message "Loading property information list by namespace failed or property not found
in the list" in the event log”
Usually this error caused by when deleting default application (BizTalk Application 1) that used to store message context
property field schemas that are provided by adapter vendor to
You can solve this problem by simply reinstall the adapter or selecting repair adapter option. Or GACing and deploying required property files
manually.
Please mark answers that solve your problem.

MSS UWL WebDynproApplication value not found ...

Hello,
I am using MSS and would like to approve recorded times. But when I configure the UWL there is a problem with registering the object tpys:
WebDynproApplication value not found for task TS00700049 in system SAP_ECC_Financials
Portal Component value not found for task TS00700059 in system SAP_ECC_Financials
Could someone tell me please what this could be and how I can fix it?
Thx, Vanessa

Hello Siddharth Rajora,
thanks for your answer. I will try it out in the next days.
Could you tell me which which values I should set for the parameters?
Thanks,
Vanessa

Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly.

Hi,
We are facing issue in BizTalk 2010 837 Institutional claim process. The Error is “Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly”.
We have used Custom Pipeline component to update the promoted property like MessageType. When we drop the XML File in Receive Location it generates the XML file through Pipeline but promoted property MessageType is not updated in Receive Location and throw
the error as mentioned.
We have the schema which is not duplicate as well as different version.
Could you please help on this issue.
Thanks in advance.

Praveen,
There are two issues here.
“Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly” issue is normally due to the deployment issues. This more often occurs when you have same schema with multiple
version and this issue is due to the sequence/order in which these two schemas are deployed. If you run the following SQL query in your BizTalk management db replacing it with your target namespace of the schema deployed
SELECT *
FROM bt_XMLShare
WHERE target_namespace like N'http://YourTaggetNameSpace'
You shall see two version of the same schema listed and both of them should have Activate flag set to 1. If any of the schemas is set to 0, then you will have the above mentioned issues. This is due to the way the different versions of the schemas are deployed.
You can undeply both the version, deploy them together or deploy the older version first and the later version later.
And for another issue of custom property not updating the MessageType property, debug the pipeline component code. This issue has no direct impact to the above issue. If you you’re your Message Type to be updated and if it’s not getting changed, then debug
the code and check why its not been updated.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

HT204266 When in setting's on display list is option for radio how do you get it to work or is this not possible. When i press centre button it puts a tick beside it

When in settings on display list is option for radio how do you get it to work or is it possible. When centre button is pressed a tick appears beside it.

The Palm Desktop is available to download from the Palm site:
http://www.palm.com/us/support/macintosh/mac_desktop.html
though this doesn't list the Clie devices and you may need to check which version you should be using. The Desktop will run on 10.4.
The 'Apple' key is the Command key.
You may need USB Overdrive - a useful program - unless the mouse comes with a Mac driver (some Miscrosoft mice do). Apple's Might Mouse will work fine.
USB overdrive usefully allows you to assign the same mouse click to do different things in different programs.

UJK_VALIDATION_EXCEPTION:Property value not found

Hi All
I am getting below error when executing script logic.
UJK_VALIDATION_EXCEPTION:Property value not found.
I got Entity and Intco as properties in my dimensions (entity and intco dim).
*WHEN Z_PARTNERCO
*IS <> PCC_DEF_CC
*REC(FACTOR=1,Z_COSTOBJECT=[Z_PARTNERCO].ENTITY,Z_PARTNERCO= [Z_COSTOBJECT].INTCO,EB_DATASOURCE ="Matching")
*ENDWHEN
Any ideas

Hi Satish,
that a script works on BPC MS, doesn't automatically means it also works on BPC NW.
Since you don't specify the dimension Z_COSTOBJECT nor Z_PARTNERCO in the XDIM_MEMBERSET, the logic will try to fetch the properties for all members of these dimensions. When you don't maintain the properties for all members the logic will not work.
I advice you to make a specification in your XDIM_MEMBERSET for the dimensions Z_COSTOBJECT and Z_PARTNERCO so you know that the properties are maintained for the selection you try to fetch, or you have to maintain the properties for all members of your dimensions Z_COSTOBJECT and Z_PARTNERCO.
But first i would suggest that your try the logic in the logic tester integrated with BW.
Run transaction SE38 in the basic screen of BW and than run UJK_SCRIPT_LOGIC_TESTER.
This will give you a possibility to run your script in a simulation, this way you can test the script first with only one member from which you know the properties are maintained to see if it works.
Harmen

HP Lists 3 Options For Scanning

The following link (shown multiple times in this forum) lists 3 options for implementing the scanning feature of HP Photosmart scanners with OS X 10.6:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&dlc=en&lc=en &jumpid=regR1002USEN
I have tried the "Preview" approach, and it worked!
What I'd like to know is whether there is any significant advantage of one option over another.

It sounds like you have the 10.5 driver versions installed versus the Snow Leopard drivers.
Look for an HP folder in your Applications folder. If you find one open it and look for an uninstall option. If there isn't one then delete the folder and go into System Preferences -> Print & Fax Settings and remove the printer. (if you have an Adobe printer that's not going to be any good to you in Snow Leopard either)
Now add the printer back and the new Snow Leopard drivers should load.
Take a look at the following article
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=2512010
Hope that helps

I have upgrade os 6 on my iphone 4 but now in map application i cant found direction from location to location , message appear direction not found so please tell me solution for that

i have upgrade os 6 on my iphone 4 but now in map application i cant found direction from location to location , message appear direction not found so please tell me solution for that

http://support.apple.com/kb/HT3743
Sorry discussing J/B is in breach of the terms and conditions of thi Apple hosted forum
Google is probably your best hope

UWC - 'not found' response from cal/addr/options tab

As the subject says, you log into UWC, the mail tab is working fine, but the Calendar Tab, Address Book and Options Tab all come back with 404 Not Found. I've seen several common issues in the past with odd links, but I've never seen all of them return not found while the mail tab works no problem.
Installation is UWC 05Q4, Messaging on the same host, Cal/AM/LDAP on a remote host.
Any experiences like I've described?

Hi,
122793 is the 6.3 UWC upgrade patch -- so not the right patch as there are a number of pre-requisite steps to perform prior to upgrading and a few post-steps:
http://www.sun.com/bigadmin/hubs/comms/downloads/updates.jsp
Regards.
Shane.

"Adobe Acrobat 9.0 Type Library " not found in COM list

Hi
I was using the "Adobe Acrobat 7.0 Type Library" till yesterday and my program ran prefectly fine
i have acrobat 9 pro in my system and to my knowledge i din change anything
when i ran my program today it said that acrobat classes not found
when i tried to add reference to "Adobe Acrobat 9.0 Type Library" i could not find it
all i can find is acrobat but if i click that it throws me error
"A reference to acrobat could not be added. couldnot register the ActiveX type library 'C:\program files\Adobe\Acrobat 9.0\Acrobat\Acrobat.tlb'
i am confused wat could be the reason because i didnt change anything
i am supposed to show the demo today
please help
Any help is appreciated.
Sri

Sorry typo error
"I was using the "Adobe Acrobat 9.0 Type Library" till yesterday and my program ran prefectly fine"

HT3529 Contacts not found in contact list after saving from new text message

When a new number texts me and I save it to my contacts, I can find that contact when texting, but contact does not show up on my phone list contacts. For Example: I received a text message from (555) 555-5555. I #1 clicked "Contact" in the top right corner of the text message screen, #2 clicked "i" button, #3 clicked "Create New Contact," #4 added first and last name, and #5 clicked "Done."
In the future, if I try and text that saved number, the contact will appear under the saved name. But if i press the phone icon and look at my contact list, the contact is not there. So if I try and text "Heather Campbell" i can find the contact by clicking new message and typing "Hea" and send her a text message with no problem. However if I go to my phone contact list and try to call her, she is not listed as a contact.
Please Help!

Unfortunetly, that's not the problem. I have 3 groups. 1. All iCloud 2. All Hotmail 3. All Facebook. I have the All iCloud checked, i do not want facebook friends and email addresses in this contact list. This will only give me a list of phone numbers I saved from call log. Not phone numbers I saved through text message. Thank you though!

I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

Hi,
I forgot my security questions and I don't have a rescue email setup.
I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
How can I reset the security questions.
thank you

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Database not found/Error: ORA-16621: database name for ADD DATABASE must be

I am new to Data Guard and am trying to set up Data Guard Broker. I had created a configuration file with both my primary and standby databases and at one time I could show both databases. But now I can no longer show the standby database nor can I enable, disable or reinstate it. Here is what I have:
Primary Database: orcl10g
Standby Database: 10gSB
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose orcl10g
Database
Name: orcl10g
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
orcl10g
Properties:
InitialConnectIdentifier = 'orcl10g'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '10gSB, orcl10g'
LogFileNameConvert = '/oracle/oracle/product/10.2.0/oradata/orcl10g/redo01.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo01.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo02.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo02.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo03.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo03.log'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'remarkable.mammothnetworks.com'
SidName = 'orcl10g'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521))'
StandbyArchiveLocation = '/oracle/flash_recovery_area/orcl10g/archivelog'
AlternateLocation = ''
LogArchiveTrace = '1024'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> remove database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> reinstate database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> enable database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> add database '10gSB' as
connect identifier is 10gSB
maintained as physical;Error: ORA-16621: database name for ADD DATABASE must be unique
Failed.
How can I get Data Guard to see the standby database correctly again?

Thank you for the constructive feedback. I have been able to make progress on this issue.
I did check the Data Guard Log files as you suggested. I did not find anything when I checked them before but this time I found the following:
DG 2011-06-16-17:23:18 0 2 0 RSM detected log transport problem: log transport for database '10gSB' has the following error.
DG 2011-06-16-17:23:18 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16737: the redo transport service for standby database "10gSB" has an error
DG 2011-06-16-17:23:18 0 2 0 NSV1: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 0 RSM0: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
I verified that I am able to connect to both the primary and standby databases via external connections:
-bash-3.2$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 17-JUN-2011 12:41:03
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 17-JUN-2011 01:40:30
Uptime 0 days 11 hr. 0 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521)))
Services Summary...
Service "10gSB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_DGB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_XPT" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl10g" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10gXDB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_DGB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_XPT" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
The command completed successfully
-bash-3.2$
-bash-3.2$
-bash-3.2$ sqlplus system/dbas4ever@orcl10g
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:41 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
-bash-3.2$ sqlplus system/dbas4ver@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:59 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress <== I think this is normal since the database is in mount mode
Enter user-name:
I also checked the listener log file and did see and error associated with a known bug:
WARNING: Subscription for node down event still pending
So I added the following to the listener.ora file and bounced the listener:
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
That seems to have taken care of the error.
The following is my listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC = ( GLOBAL_DBNAME = 10gsb_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = 10gsb.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
I again tried connecting externally to the standby database:
-bash-3.2$ sqlplus system/dbas4ever@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 13:09:00 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Enter user-name:
and see this in the listener.log file:
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11357)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11358)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:24 * service_update * 10gSB * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25119)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25120)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=emagent)(HOST=localhost.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25121)) * establish * orcl10g * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11420)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11422)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:24 * service_update * 10gSB * 0
I tried again to see the database in Data Guard Broker:
DGMGRL> show database 10gSB
Object "10gsb" was not found
however, I then was able to add the database in Data Guard Broker:
DGMGRL> add database 10gSB
as connect identifier is 10gSB
maintained as physical;Database "10gsb" added <== this is progress!!!
However the configuration shows the following:
DGMGRL> show database 10gSB
Database
Name: 10gsb
Role: PHYSICAL STANDBY
Enabled: NO
Intended State: OFFLINE
Instance(s):
10gSB
Current status for "10gsb":
DISABLED <=====
So I tried to enable the database:
DGMGRL> enable database 10gSB
Error: ORA-16626: failed to enable specified object
Failed.
and I tried to reinstate the database:
DGMGRL> reinstate database 10gSB
Reinstating database "10gsb", please wait...
Error: ORA-16653: failed to reinstate database
Failed.
Reinstatement of database "10gsb" failed
So I checked the configuration and now see two entries for the standby database but with case differences:
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
10gsb - Physical standby database (disabled)
Current status for "orcl10g":
SUCCESS
Question: How do I get rid of 10gSB and enable 10gsb?

Smartforms: Output Options for Field Contents not working within table

Hello,
to display an amount and its unit I am using &GS_MM_IT_GEN-MENGE(R)& &GS_MM_IT_GEN-MEINS& with a line of a table. Unfortunatly it seams that the output option "R" (right-justified) is not working with the table context. Has anyone an idea, what to do?
Thanx,
Peter

Dear all,
thank you for your suggestions. I have found out, that the output option work pretty well as described in the documentation. The are output options of a field and not of a column! To get a right justified column, I had to change the attribute of the parapraph assigned to the column.
Regards
Peter

"File not Found" error in the admin console for dimension

Hi All,
We are onto the BPC7 MS version and recently we have started facing an error "File Not Found" while trying to access the dimension members from the admin console.
I have checked the "adminapp" folder where all the dimension files should be placed in the system, the files are present in the folder.
The mbr<DIMENSION> tables are also present in the database and have the members intact.
I have also tried with processing the dimensions (NOT processing from the membersheet) and it goes successful, but still face the same "File Not Found" Error.
We have a single appset and a single application.
Regards
Raghav

Hi Sorin,
Where can I check the File path if it is set incorrect?
I am recieving this message for all the dimensions, even when I click on the "maintain dimension members", try to process or even try to copy them i have this pop up showing "file not found".
I have the dimension tables intact at the DB servers and they have the members in them.
Regards
Raghav

Value not found in allowed list of options for field...

Similar Messages

Maybe you are looking for