Values are mismatching in CCLM Dashboard in solman 7.1 sp10

Hi Experts,
I am new to solution manager and I have configured Custom Code Management in solman7.1.The dashboards are giving some values like 1.custom code usage 2.custom code Quantity etc like that. But when I create a new custom code but it is not getting updated in the dashbords as well. The Values in the dashboards remain same as before. Could you please suggest...please find the screenshot below.
Thanks
Sajin

Hello Kiran,
Currently you are not allowed to use Solution Manager shared for different sap customers ( companies), It's is possible as indicated by friend Prakhar Saxenabut you are not allowed due to usage rights.
There is a Pilot program named SMaMS Solution Manager as Managed Service where there we are testing that types of scenarios, currently for provide SAP license service as self-service to different sap customers with ITSM ( OSS message ), Maintenance Optimizer, Solution Documentaion and SAO engagement and service delivery. check that link:
Solution Manager Project to watch in 2014
Another problem for your scenario is the ise of ITSM for a non-SAP components, to do that you need to check ITSM license prince because non-SAP systems are not included normally (check with your account manager at SAP).
Technically is hard to separate data on Solution Manager, but is possible in different ways, is not easy.
If you need more information related don't hesitate to contact me.
Regards,
Luis

Similar Messages

  • Are CCLM Dashboard reports system specific?

    Hi Experts,
    Could you please let me know whether CCLM dashboards are system specific or not? Because When I check in my solution manager it is showing reports from all the system in the landscape. please suggest?
    Thanks
    Sajin

    Hi Sajin,
    Please refer to the following link in the service marketplace to configure CCLM.
    http://service.sap.com/~sapidb/011000358700000426872012E
    Please refer to the  chapter of Optional: Setup managed systems to be handled by CCLM in page 17.
    Alsoc check:
    1809928 - Incorrect data in shown in CCLM dashboards
    1757091 - Incorrect Role Assignments for MAI
    1655615 - BPO Dashboards : Wrong numbers in static rating table
    Thanks
    Vikram

  • GR/IR A/c Amount and Amount in local Curreny values are not matching

    Hello Gurus
    When we are doing MIGO for some Scheduling Agreement PO's the Amount and Amount in local currency columns are mismatching with  paise (+/-), eventhough PO belongs to Local Currency (INR). Because of this GR/IR account is not cleared after MIRO through F.13. Both MIGO and MIRO amount are showing as Open items.
    Why it is happening and what is the way to clear GR/IR A/C. (F.13 with Tolerance limit is also not workout).
    Thanks & Regards
    Venkat.P

    Hi sridhar
    Thanks for reply
    Through MR11 also these values are not cleared.
    Regards
    Venkat.P

  • R/3 ZCOND values are not picked properly in BW

    We had a issue in one of the BW Reports. There are three types of discounts offered in the sales, namely Hospital Discount, Market Discount & Pharmacy Discount.
    For certain billing document nos, the R/3 and BW values were not matching. However, the Net Amount is matching.
    There is a table by the name ZVBW_PRICE_COND which is a view created out of the tables VBRK, VBRP & ZSBW_PRICE_COND.
    In R/3, we put the POSNR value (Billing Item) and BELNR value (Billing Doc no.) to generate KNUMV value (Number of Document Condition) and KSCHL values.
    In the KONV table, we put the KPOSN (Condition Item no.) = 10, KNUMV value and KSCHL value (Condition Type) to get the Condition value.
    The value generated was ok and were same as that of vf03.
    Now we checked the Data source 2LIS_13_VDITM and its extract structure.
    Here we found “Field only in Customer Exit” checkbox ticked for ZCOND1 to 4.
    However, in BW, there are specific Infoobjects like Condition Value1,2,3,& 4 each of which is directly mapped to ZCOND1,2,3,& 4 respectively.
    Hospital Discount and Market Discount are mapped to ZCOND3 & ZCOND2 respectively in the concerned report.
    I could have remove the ticks in the checkbox and make ZCOND accesible to extractor. But problem is that it is only certain billing doc nos for which discounts are not matching. Any help will be highly appreciated.
    Best Regards,
    Surajit

    Hi,
    This checkbox is set for those fields of the datasource(in rsa6) which are custom fields,and whose values are determined by a user-exit written in tcode CMOD.
    We have observed that keeping this checkbox ticked or unticked does not make any difference at all.So even removing this checkbox for your 4 fields will not solve the mismatch issue.
    The mapping for the 4 fields in your case,is already there in BW.
    Please go to tcode CMOD,enter the BW project name,select components and click on display.4 user exits will be displayed.
    1st is for TD datasources,2nd for master data attr,and next are for text and hierarchies.
    Double click on 1st exit FM,then double click on the include program,and find the exit code written for your datasource.Most probably user-exit not working OK.
    cheers,
    Vishvesh

  • Constrained values not generating correctly in Dashboard prompt

    Hi,
    I have a dashboard prompt which has 4 drop downs viz From Month, From Year, To Month, To year and one Mullti Select Product.The default and the drop down values for the first four prompts are controlled by SQL queries so that in drop down only those values are displayed in the drop down for which i have data in my fact tables and the multi select of product is a constratined one.
    As per the current scenario i have data for current month - 1 (say if current month is August so i have data for July). In the default values for these prompts i show the current month and year (August and 2010). So when i select July in my From Month prompt the values for other promts get set to August and 2010 for month and date prompts (both From and To). And then when i click on the multi select of product no values are shown on OBI screen even though they are in database.
    This is due to the fact the query that OBI genrates in the backend the To Month is set to August not May, even though May is shown on the dashboard.
    However, if cilck on GO then the values for contsratined promt are generated correctly and also the backend query changes the To Month is set to May.
    Could somebody help me to resolve this problem.
    Thx :)

    Reminds me of a bug I hit with constrained prompts and a time dimension, but I didnt have another dimension (your Product) in my case. I'll try and dig out the bug number for you. - Have you got a support account to login and check it out?

  • Stcok type H values are not added into report

    Hello all,
    I am facing problem with inventory management.
    Here we have nearly 15 plants.  10 are already there and 5 are newly added in the last month.
    For the previous 10 plants we are getting the valuated stock perfectly, but i am checking for the remaining 5 new plants data is mismatching.
    while comparing the values from R/3 (MB5B) to the BW query values are different.  So i have checked the contents of Cube.
    There i found a pecular thing that some records having Movement type 641 and Stock Type H. These values are not getting cumulated in the report.  Only these values are coming for the new 5 plants.
    I have already checked the Snotes 589024, 417703.
    Please suggest me how to overcome from this issue.
    Regards
    Sankar

    Hi,
    Thanks for your reply.
    As I already said Stock type is defined as same as the previous plants.  But still we are not able to get the data in the query.
    In the cube level I am able to see the data, but when we are going for the report then we are not getting the values which are present in the cube where Stock Type is H.
    Please suggest on ths.
    Regards
    Sankar

  • 400 values to be displayed in dashboard prompt

    Hi,
    How to display 400 values in dashboard prompt as only 256 values are displayed at the max?
    With Regards,
    Sumedh

    Wrong, wrong, wrong! If this is a "user requirement," you need to talk to the user. If this is something you are trying to implement because "the data are there," than you need to understand that you shouldn't always build somethign "just because you can."
    How in the world could a user scroll through 400 values?? It is practically impossible and therefore unfeasible.
    The data needs to be filtered to a reasonable amount first. I can guarantee you that the end user will not need to choose from that many values. The dashboard should be used to display the most important data an end user needs to make a decision. It shouldn't be used as a "data dump." There are other better utilities to use for that.
    In conclusion, a prompt should only offer a reasonable amount of choices that a user would make. Remember, it is of no use to build a dashboard or report that is too cumbersome to user...
    Good luck.

  • While Creation Of SaleOrder Char Values are not getting saved.(V C)

    Hi SAP gurus,
    One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
    Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
    Awaiting for your valuable reply.
    Cheers,
    Kumar.S

    Kumar ,
    If you assign values in classification view or configuration profile  they will become default for the product, and it willnot be changed in sales order.
    another thing if the item category is incorrect you will not get the configuration pop up at all .
    problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
    If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
    see the result of configuration before saving the sales order , i hoep it will work for you.
    I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
    Check and revert back.
    Regards
    Ritesh

  • Values are not coming in report S_ALR_87013558

    Hi,
    I am running the budget report S_ALR_87013558. In that report except budget column, other values are coming(Actual,Comiitment, remordpla, assigned,available)....
    BUt I have assigned the budget..It is showing properly in S_ALR_87013557.
    In S_ALR_87013228 report, available it is showing in negative.
    How to rectify this issue?
    Regards
    Suresh

    Hi Virendra,
    Thanks for ur reply.
    I have ran CJEN for the project. But still it is showing the same in S_ALR_87013558 report.
    But the budget value is coming properly in S_ALR_87013557 report.
    How to goahead???
    Regards
    Suresh

  • Values are not getting updated in sales report

    I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
    regards,
    thooyavan

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

  • Values are not getting updated in 'stocks App' in my i4 phone.  What is the solution?

    values are not getting updated in 'stocks App' in my i4 phone.  What is the solution?

    you have encountered activation lock.  Read iCloud: Activation Lock

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Reporting Issue   "Opening Balance values are going to Not Assigned Values"

    Hi Friends,
    Closing Balance values are perfectly showing but opening balance values are going to Not Assingned Values? I am not able to find it out.
    our query is built on PCA Daily Multiprovider.
    Pls Help.
    Thanks
    Asim

    Hi Ravish,
    Here are the details
    Stock values and quantities in the PCA cube of BW never show correctly at an article level due to an opening balance issue.  This reduces our ability to report on stocks at moving average price, i.e. anything that actually matches the financial values in the system. The issue arises because stock at the beginning of the year (quantity and value) for any site is only shown against an article of "Not assigned."  Stock movements during the year are shown against the appropriate article.(If you have a new site, the will have stock assigned against an article up until 31 December and then the 31 December values are shown against "not assigned" for the next year).
    Thanks
    Asim

  • Dynamic sql reurns no data when multiple values are passed.

    (Dynamic sql returns no data when multiple values are passed.)
    Hi,
    While executing the below dynamic sql in the procedure no data is returned when it has multiple input values.
    When the input is EMPID := '1'; the procedure works fine and returns data.Any suggestion why the procedure doen't works when input as EMPID := '1'',''2'; is passed as parameter?
    =======================================================
    create or replace PROCEDURE TEST(EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
    stmt VARCHAR2(9272);
    V_EMPID VARCHAR2(100);
    BEGIN
    V_EMPID :=EMPID;
    stmt := 'select * from TEST123 where Empid is NOT NULL';
    IF V_EMPID <> '-1' THEN
    stmt := stmt || ' and Empid in (:1)';
    ELSE
    stmt := stmt || ' and -1 = :1';
    END IF;
    OPEN rc FOR stmt USING V_EMPID;
    END Z_TEST;
    ============================================================
    Script for create table
    ==================================================================
    CREATE TABLE TEST123 (
    EMPID VARCHAR2(10 BYTE),
    DEPT NUMBER(3,0)
    ===========================================
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('1',20);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
    =============================================
    Select * from TEST123 where Empid in (1,2,3)
    EMPID DEPT
    1     20
    2     10
    3     30
    3     30
    2     10
    ===================================================================
    Any suggestion why the procedure doen't works when input EMPID := '1'',''2';?
    Thank you,

    The whole scenario is a little strange. When I tried to compile your procedure it couldn't compile, but I added the missing info and was able to get it compiled.
    create or replace PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
      stmt        VARCHAR2 (9272);
      V_EMPID     VARCHAR2 (100);
    BEGIN
      V_EMPID := EMPID;
      stmt := 'select * from TEST123 where Empid is NOT NULL';
      IF V_EMPID = '-1' THEN
        stmt := stmt || ' and Empid in (:1)';
      ELSE
        stmt := stmt || ' and -1 = :1';
      END IF;
      OPEN rc FOR stmt USING V_EMPID;
    END;If you pass in 1 as a parameter, it is going to execute because the statement that it is building is:
    select * from TEST123 where Empid is NOT NULL and -1 = 1Although the syntax is valid -1 will never equal 1 so you will never get any data.
    If you pass in 1,2 as a parameter then it is basically building the following:
    select * from TEST123 where Empid is NOT NULL and -1 = 1,2This will cause an invalid number because it is trying to check where -1 = 1,2
    You could always change your code to:
    PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
      stmt        VARCHAR2 (9272);
      V_EMPID     VARCHAR2 (100);
    BEGIN
      V_EMPID := EMPID;
      stmt := 'select * from TEST123 where Empid is NOT NULL';
      stmt := stmt || ' and Empid in (:1)';
      OPEN rc FOR stmt USING V_EMPID;
    END;and forget the if v_empid = '-1' check. If you pass in a 1 it will work, if you pass in 1,2 is will work, but don't pass them in with any tick marks.

  • Excise values are not flowing  in MIGO

    Dear All,
    I am facing a problem during MIGO.
    THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
    1 I have created a PO.
    2.Delivery through VL10D
    3.Picking-vl02n
    4.Created Bill-VF01
    5.Created Invoice and saved it
    When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
    Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
    Regards
    Manash

    Hi,
    Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
    SETOFF Must Be Maintained:-
    JMX1 --     IN: A/P BED setoff
    JEX1 ---      Ecess Setoff Sta
    HX1     IN: A/P SECess SOTot       
    If it is there please follow the Following steps for STO
    1.     Create Purchase Order(STO)  using ME21N
    2.     Create Outbound Delivery using VL10B
    3.     Create Billing Document using VF01
    4.     Create Excise Invoice using J1IIN
    5.                   GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
    Hope Help U !
    Regards,
    Pardeep Malik

Maybe you are looking for