Values not coming on export invoice

Dear all,
While creating Excise invoice for exports i am not getting excise values in document because i have not maintained condition types in Export pricing procedure.
Now i have maintained Condition types in Export Pricing procedure both percentage and quantity condition types of excise and i kept all as statistical, even though the values were not coming to J1IIN and my client require excise values on print at the same time values has to come on ARE-1 document also
can anybody guide me how values has to come on both these documents 1. Export Excise invoice 2.ARE-1 document.
regards
venkata

Refer SAP Note No. 822226 for code correction.
Regards,
Dilip Shende

Similar Messages

  • Amount is not coming into the Invoice for Warranty Order

    Salute All !!
    Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
    This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
    This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
    Please provide solution.
    Rgds
    Srivastav
    +91-9973504950

    Hi,
    Because you are not billing to customer the net amount is zero-
    You can do like bill the component as regular item and give credit note against it.
    or else create seperate billing output type assign this to proforma invoice- print the cost of item  by pulling it in new smart form.
    (this is not very good idea because , customer knows the actual cost of the item)
    Thanks
    Chidambaram

  • Excise invice -values not coming

    i have create billing & accounting doc is generated -bed /cess are posted.
    but when i'm creating excise invoice with ref to billing bed /cess values are not coming in excise invoice
    J1IIN
    pl SUGGEST

    Hi
      Please check in your billing document against all your excise condition types you have duty values.
    If billing document does not contain duty values then obviously system will not bring the duty values in your excise invoice (J1IIN).
      If you have duty values in your billing document then still excise invoice is not copied to your excise invoice then please check the below customization setting:
    MG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults:
      Here ensure that all your excise condition types are properly maintained for your TAX PROCEDURE.
    Example if you are using JEXP-BED, JECS-ECS, JA1X-SeCess condition type in your pricing procedure.
    Then check you have maintained as follows:
    BED COND (A/R BED)..........JEXP
    A/R BED Perc (BED Perc)......JEXP
    A/R ECS Cond..........JECS
    A/R ECS Perc ..........JECS
    A/R AT1 Cond...........JA1X
    A/R AT1 Perc............JA1X.
    The above setting is required only if you are using percentage condition type. If you are using both percentage and Total condition type. Then it has to be classified as below. JEXT-BED JECP-ECS and JA1Y-SeCess.. These are total condition types.
    BED COND (A/R BED)..........JEXT
    A/R BED Perc (BED Perc)......JEXP
    A/R ECS Cond..........JECP
    A/R ECS Perc ..........JECS
    A/R AT1 Cond...........JA1Y
    A/R AT1 Perc............JA1X.
    Regards
    MBS

  • Value not appearing in commercial Invoice

    Hi Guru
    Value is coming in Excise Invoice and customer ledger but nothing is appearing in commercial Invoice.It shows zero value per unit as well as net value..and consequently it shows zero value in commercial output.
    Plz suggest
    Thanks in Advance
    Mahesh

    Kindly check the Billing Document.Are you  getting the Excise Value in J1IIN (Display) or checking the Excise Registers.
    Best Regards,
    Ankur

  • Value is not coming in excise invoice ..

    Hi .all,
    We have created one plant . For that we did STO , delivery , PGI , and billing ( commercial and excise ). But in Excise invoice , excise value is not coming ...
    Pls Advc ....

    hi,
    pls check whether u have done relevant setting for the new plant code.
    SPRO >Log general > Tax on Goods Movements > India > Basic Settings
    reg
    Deepak

  • Excise Values not are not coming in Export sales

    Hello ,
    when i am doing Export Sales , the values i am able to see  but when i go to Utilization and click on Calculate TAX , the values are coming, Zero Vaules are There.
    But in Domestic its working fine
    Pls Help

    HI
    You have to use the User exit
    Ask your abapper to write the below code
    FUNCTION J_1I7_USEREXIT_DUTY_IN_EXPORT.
    ""Local Interface:
    *" IMPORTING
    *" REFERENCE(YVBRK) TYPE VBRK
    *" EXPORTING
    *" REFERENCE(SUPPRESS_CALCULATION) TYPE J_1IEXCHDR-STATUS
    *If you do not want the excise duty to be calculated for a particular
    *transaction then you need to mark the flag supress_calculation as 'X'
    *This flag when left blank will trigger calculation of ED during j1ii
    *When it is marked, the ED copied from billing will be left as it is
    SUPPRESS_CALCULATION = 'X'.
    ENDFUNCTION
    Re: ARE-1&ARE-3
    regards

  • PR/ Sales order value not coming in condition value routine

    As per the requirement while creating a PO I need to add a new condition type and need to calculate condition price for this newly added condition based on some matrix.
    For this requirement PO will always be created with reference to PR and with account assignment category as 'E' .
    (Hence sales order number /item will be copied from PR to PO in account assignment tab  )
    Now I have created a new pricing requirement routine ( To add the condition type ) and new condition routine to calculate and update the price.
    These routines are working fine if i check them with hard coded price values.
    But the problem is that I need the PR number(which we put in item overview ) / Sales order item number (from account assignment ). these values are not coming in pricing tables in the routine...structure EKPO come blank, KOMP-AUBEL is also blank).
    Please give your suggestions how i can i get PR/ SO in the condition values routine .
    Please reply

    resolved my self

  • Mapping Condition issue, Value not coming in multiple segments.

    Hi All,
    File to Idoc scenario.
    My file looks like below.
    HD 89650 28/01/11 "Presciber tan"
    AF "disc-rsn"
    RK "007287001" A
    KE disc-code "007287"
    KE addr-num "001"
    DF w-phone "03 98483299"
    AF "drs"
    RK "007287" A
    KE dr-num "007287"
    DF affil "OPSM"
    DF country "0"
    AF "disc-rsn"
    RK "dr-addraddress-1 17287|1EN" A
    KE disc-code "008287"
    KE field-name "address-1"
    KE element " 1"
    T         16
    Condition:
    I have a condition where I need to create an Idoc segment Z1disc when row - "AF "disc-rsn"" exists.
    For the filed "Z1disc-CODE", I need to pass the value when row "KE disc-code" exists,
    Result:
    From my file, AF "disc-rsn" exists twice, so I created 2 Z1disc segments.
    Coming to the field "Z1disc-CODE", the value "KE disc-code" exists twice in the file. After mapping, the value is coming only once in the first segment. The field "CODE" is not coming in the second segment like below.
    Idoc
    -- Zdisc
    --- Lang -- E    
    --- Code --  "007287"
    ---Zdisc
    Lang -- E
    When the check the display queue, it is showing like below
    SUPPRESS
    007287
    007287 -- (Context)
    008287
    008287-- (Context)
    It showing correctly from display queue, but the value are not populating except in first segement.
    For your information, After content conversion, my source xml will look like below.
    <?xml version="1.0" encoding="utf-8" ?>
    - <ns:MT_Optum xmlns:ns="http://luxottica.com/SAP_CRM/DirectSales/OptomDiscount">
    - <RecordSet>
      <Row>HD 89650 28/01/11 "Presciber tan"</Row>
      </RecordSet>
    - <RecordSet>
      <Row>AF "disc-rsn"</Row>
      </RecordSet>
    - <RecordSet>
      <Row>RK "007287001" A</Row>
      </RecordSet>
    - <RecordSet>
      <Row>KE disc-code "007287"</Row>
    Kindly help me, I'm trying all the options and it is not working.
    Is there anything I need to change in Source structure?
    Thanks
    Deepthi.

    Hi Aravind,
    Here is my Source message.
      <?xml version="1.0" encoding="UTF-8" ?>
    - <MT_XIOptum>
    - <Header>
      <HRow>HD 89650 28/01/11 "Presciber tan"</HRow>
      </Header>
    - <Detail>
      <Row>AF "disc-rsn"</Row>
      <Row>RK "007287001" A</Row>
      <Row>KE disc-code "007287"</Row>
      <Row>KE addr-num "001"</Row>
      <Row>DF fax-num ""</Row>
      <Row>DF in-out "I"</Row>
      <Row>DF phone-2 ""</Row>
      <Row>DF post-code "3108"</Row>
      <Row>DF provider-num "4349201J"</Row>
      <Row>DF rec-stat "A"</Row>
      <Row>DF w-phone "03 98483299"</Row>
      <Row>AF "drs"</Row>
      <Row>RK "007287" A</Row>
      <Row>KE dr-num "007287"</Row>
      <Row>DF affil "OPSM"</Row>
      <Row>DF country "0"</Row>
      <Row>DF descript "KK"</Row>
      <Row>DF rec-stat "A"</Row>
      <Row>AF "disc-rsn"</Row>
      <Row>RK "dr-addraddress-1 17287|1EN" A</Row>
      <Row>KE disc-code "008287"</Row>
      <Row>KE field-name "address-1"</Row>
      <Row>KE element " 1"</Row>
      </Detail>
    - <Trailer>
      <TRow>T 25</TRow>
      </Trailer>
      </MT_XIOptum>
    Row> -> [removeContext] ->[ equalsS "disc-rsn" ] -> [createIf] -> <Zdisc>
    This Part is working.
    <Row>> startWith2>IF
    KE disc-code-->THEN > removeContexts>SplitbyValue>SUBSTRING>Code.
    When I check the display queue at Code. I'm getting the below values.
    SUPPRESS
    007287
    007287 -- Context change
    008287
    008287-- Context Change
    Only 007287 is displaying in FIrst segment "Z1Disc" and second value "008287" not coming in second segment "Z1Disc".
    Anything is wrong?

  • VALUES NOT UPDATED IN EXCISE INVOICE

    hi  gurus ,
                     well all the settings  to my knowledge are correct  for CIN customization  , but the excise values are not updated  in excise invoice .the values are 0 " . can ne1 pl help ? dts  top priority .

    Hi,
    Spro>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions>Specify Which Movement Types Involve Excise Invoicesu2014here check for movt type 122 which register is maintained once appropriate register is maintained there then system will update the same.
    Or even you can try J1I5 update register with movt type 122 & enter material document (return delivery material document no) & classification IPD (Issued for clearance/Removal on payment of duty) & select the correct radio button of register. Once update the register then Extract data for excise registers Using J2I5.
    It will update both the data in the register
    Rgs

  • Copa report values not coming in report

    hi Gurus
    In copa Values are not coming in report.
    where is the problem
    can anybody suggest
    bye
    Ramesh Reddy

    Hi Ramesh,
    First u check with whether the COPA is integrated with other modules or not? that means with fi/mm and co and SD...

  • Excise consdition value not flowing inot the invoice

    Dear Gurus,
    Excise condition value not flowing in to  the invoice from sales order
    Thanks
    Sasi

    Dear lakshmipathi,
    Iam entering the BED/Ed/ShEd  values manually....
    Where can I check the Tax code in the sales order?Does you mean to say the Tax classification at Item-Shipping tab?
    Thanks
    Sasi

  • Workflow Issue- Value not coming in BUS2032

    Hi
    I am creating a Workflow for Sales order. In USer Exit , i am calling FM "SAP_WAPI_CREATE_EVENT" to trigger the custom workflow with event TRIGGER created in BO ZBUS2032 which is delegated to BUS2032.
    In Workflow Trigerring Event , I am binding._EVT_OBJECT with BO- BUS2032 and created BUS2032 a workflow container.
    When i am triggering the workflow , Workflow is getting trigerred, But nothing is getting passed to BUS2032 due to which Workflow is not coming in Workflow Overview of Sales Order but workflow gets trigerred via SWIA and if i check workflow container values at runtime - BUS2032 is blank.
    Can you please advise.

    Hi Silky,
    Did you debug and see.Check this documentation on this from sap-img.Check this and post.
    http://help.sap.com/saphelp_40b/helpdata/fr/fb/135de9457311d189440000e829fbbd/content.htm
    Regards,
    Madhu.

  • Feature Table values Not coming in order in MDM

    Hi
    We have a problem with one of our extracts.
    There is a qualified table called "Feature". And in syndication map we are extracting some models which have associated "Feature" values.(30 values).
    In data manager i can see the  features associated with a model.  And associated "Sequence numbers" of all these Features.
    But while syndication extract the Features are not coming in XML  according to the sequence number.
    The order of features is not same as the Sequence numbers displayed in data manager.
    Can anyone help me to find the cause of this . Do i need to make change anywhere else to make the extract according to the Sequence number?
    Your quick response is greatly appreciated.
    Thanks
    Dhanish Joseph

    Hi Dhanish,
    Syndicator always tries to send the records in the same order as you see in the Records pane of the syndicator.
    In data manager,when you were trying to search based on the qualified table, you must have sorted them in sequence (by clicking on the field on the records pane) and the same thing might not be sorted in syndicator.
    Please check if this is the case and sort the records in syndicator based on your qualified field and you will get the syndication files in the desired sequence.
    Regards,
    Sravan

  • Float value not coming for xml where in xsd datatype is double

    Dear Nandy, Previously i faced same error. Then I Chaned the data type "Double into String i changed in the xsd". Or  "Double into Integer also it will work"  Please changed the data type then run it.  Please let me know. Thanks & RegardsKasireddy+966545281845

    We are using xml as source and xml parser is used. In xsd datatype is double but where in xml value is like-100.0 but after xml parser value is coming 100 though datattype is double. I can see scale is 0. Can anybode tell me how to increase  scale in xml parser or any other way to solve this. Thanks.

  • ED values not flowing in Excise Invoice

    All excise settings are done.
    Commercial invoice (billing doc type F2) is coming correctly with proper Excise duty and cess values.But In excise invoice created in reference to the commercial invoice these values (BED, Cess) are not flowing but material, description and quantity are coming correctly.
    Please state what is missing.
    Anubrota

    Excise details are now flowing correctly in the excise invoice(in j1iin transaction).
    Now Iam facing a problem in excise utilisation.Error message that is coming is " Not enough balance for utilisation"
    As far as config is concerned these settings are done:
    Utilisation determination:  PLA BED account 50%
                                          RG23A BED account 50%
    minimum account balances :pla bed account  9,999,999,999.00
                                              rg23a bed account 9,999,999,999.00
    how to rectify the error?
    anubrota

Maybe you are looking for