PR/ Sales order value not coming in condition value routine
As per the requirement while creating a PO I need to add a new condition type and need to calculate condition price for this newly added condition based on some matrix.
For this requirement PO will always be created with reference to PR and with account assignment category as 'E' .
(Hence sales order number /item will be copied from PR to PO in account assignment tab )
Now I have created a new pricing requirement routine ( To add the condition type ) and new condition routine to calculate and update the price.
These routines are working fine if i check them with hard coded price values.
But the problem is that I need the PR number(which we put in item overview ) / Sales order item number (from account assignment ). these values are not coming in pricing tables in the routine...structure EKPO come blank, KOMP-AUBEL is also blank).
Please give your suggestions how i can i get PR/ SO in the condition values routine .
Please reply
resolved my self
Similar Messages
-
Sales order should not copy the net value from contract
Hi,
When we are creating the sales order,Where we can maintain that sales order should not copy the net value from contract.
Regards
PrabudhHi,
When I am creating the sales order with reference to contract,it's copying the net value and quantity from the contract.
But I want that sales order should not copy the net value and quantity from the contract and user can take new required quantity at the time creating the sales order.
Regards
Prabudh -
Sales Order should not generated if total value of contract is released
Dear All,
We are creating sales order wrt to Value Contract, but it shows the warning message if value exceed above the contract value.
We required if contract value exceed then sales order should not be generated.
Thanks & Regards,
PMHi
Check in VOV7 for item category WKN under tab value contract Contract release control select B Error msg if trt value exceeded...
Reg
JJ -
Sales order are not coming in FS10N ?
Issue: How is it possible to see number of sales order in the detail of item in the transaction FS10N?
When i see the Transaction FS10N for 2011 , at item level Sale Documents are Present , but when i Use the Same FS10N for 2012 , Sale Document values are not present ?
Kindly tell me the possiblities why the Sale Document Values are not Coming ? Its Urgent .
Best Regards
Amit AroraDid you install any major upgrades or other system changes recently? I am not saying that that could cause this, but I really cannot think of anything that would suddenly stop populating Sales Document and Sales Document Item when you enter a new fiscal year. Also, are you sure you are looking at the line items that originated in the SD module?
-
Open sales orders are not coming in credit exposure
Hi,
We have implemented FSCM credit management, when i am running credit exposure, i am able to see open items from FI (200) but not for open orders (100) & Delivery (400), we have created some sales orders, which have exceeded the credit limit, system should give us a warning message. Could anyone help me to overcome this issue.
Thanks,
SaiHi Sai,
Additionally, you should check the following BADI_SD_CM, if the implementation of that BADI is correct then it should work.
Best regards,
Cristobal. -
Sales order number not coming QA32 screen
Hi Gurus,
We have created a lay out in QA32 including sales order no,but the sales order no is not visible in the Change data for inspection lot (QA32 Screen)
We are creating production order via sales order.Our client wants sales order number displayed in the screen.
What must the reason for not picking the sales order number?
Is there any other settings we are missing.
Thanks in advance
Regards
RamkumarHi,
First you tell me which Inspection type your using.
Sales order number will Show in the lot if following requirement will exist.
1. Make to Order Scenario with 04 - Inspection type (Goods Receipt from Production)
2. Inspection at sales Order level with 10,11 Inspection Type.
Regards,
S.Babusingh -
Sales order values not coming in copa report can been seen in ke24
hi
i have did sd and billing and actual settlement through va88
i can able to values in ke24 actual line items.
but when i cant able to see values in ke30 copa report aganist sales order characteristic
and aganist record type A values are not flowing in copa report.
please help me.
thanks
kareemhi ajay,
i have again prepare actual line items report from ke94 ,ke91 and executed report ,
here for that particular sales order values are flowing through record type C but not flowing for record type A.
sales order is not displaying for record type A.
and for that c only revenue and and raw material cost is flowing.
thanks
kareem -
2 Sales order types to post to 2 value fields
Hi,
Previously, 2 sales order types ZSA4-samples med. & ZSA5-samples adv. posts to one value field which is VV310 Local mktg mgt. Business users now requires these sales order types to post to 2 new separate value fields.
So, in Controlling I assigned condition types Z231 VAT Expense & Z232 VAT Exp/Sample FOC to value fields VV230 & VV201 respectively.
The SD consultant then changed the ZTHV07 pricing procedure to include these 2 condition types by creating 2 new steps and assigning them to routines 914 & 915. I am not sure if I should change these routines.
ZSA5 sales order type is posting correctly to value field VV201 but ZSA4 is also posting to VV201. It should post to VV230.
Thanks to advise if there's any setting whether in SD or CO I should change.
P.S.
The following are the other configurations inside the system:
ZSA4 & ZSA5 sales order types are assigned to D (Sample) document pricing procedure.
Pricing procedure ZTHV07 is assigned to document pricing procedure D.
Thanks and regards,
ThessLet us understand more on your requirement.
For doc.type ZSA4, you want to have only condition type Z231. And for doc type ZSA5, you want to have only condition type Z232. Therefore, each document type will post to COPA to correct value field.
Well, then if that's the case, I would say your requirement number 914, 915 doesn't work (it's definitely on SD side). They are developed based on your requirements so I cannot comment since it is not standard routine. -
How to block sales order for a particular pricing condition
Hi Experts,
Here I have a requirement on sales order blocking . I have searched in the forum but I didn't find any relevant thread. So please help me in the following requirement
On a particular pricing condition create or change I need to automatically block the sales order. I don't know how exactly to block the sales order. Please make me aware on this concept. Do we have any exit or badi to block the sales order in this requirement.
How to block the sales order manually and automatically please explain me.
Thanks & Regards
G.S.NaiduHi,
You can use user exit MV45AFZZ, form-routine USEREXIT_SAVE_DOCUMENT_PREPARE to set the delivery block on sales order. Write your required logic in this routine. You have to set the value of VBAK-LIFSK to a relevant value available in table TVLS (Field : LIFSP).
If the value in VBAK-LIFSK is initial, then sales order is not blocked for delivery & if it is having some value (available in TVLS), then sales order is blocked for delivery.
Regards
Vinod -
G/L account in sales order determination not diplayed
Hello,
Please help on my issue related to the account determination in sales order.
I have this condition type maintained with account key and accrual in pricing procedure.
I have also maintained both G/L and provision account for the account key and accrual in VKOA.
So now, I am expecting that when I go into the condition details of the condition type, I can see in the account determination the account and accrual key together with the G/L and provision account maintained, but then I only see the Account and Accrual keys on the condition details w/o the G/L accnt and provision accnt. can u please advise why is it not showing? and what did i missed in customizing?
Thanks in advance!Hi,
It is understood that you have assigned the G/L account in VKOA; but not traceable in the sales order. In VKOA, if you selected the first combination, check for 1. Condition type for account determination [KOFI or KOFK], 2. Account assignment group for customer, 3. Account assignment group for material.
KOFI is for account determination; whereas KOFK is for account determination with CO.
The account assignment group assigned in VKOA should match with the Customer and material used in sales order.
After creating the sales order, you can check the account assignment. Display the document; Goto environment >> Analysis >> Account determination. Click on the u2018condition typeu2019 to see whether the GL account is determined or not. Click on the access to check how the G/L account is determined.
Hope this information will be useful to you.
Regards,
K Bharathi -
At time of return depot invoice creation , not capture Excise Condition Value
Hi,
my queastion is that
In retun process from Customer to Depot,
when user create return Depot invoice through t-code VF01 then Not capture Excise Condition Value ( JEXP - Basic Excise Duty , JCEP- Edu. Cess Duty and JA1X - Additional tax. ) at time of Depot. Invoice Creation.
we can also check Table J_1IRG23D, in this table have value of these Excise Cond. Value.
But Delivery No. is not update in table J_1IRG23D.
and I applied condition formula 356 in Procedure ZDOM02 ( Traders Pricing Procedure).
How can capture condition value of JEXP, JCEP and JA1X at time of Retrun Depot Invoice Creation ?
Guide me .....Hi,
I have flow your define step:
Returns from Customer to Depot
1 Create a return order in Depot
2 Key in the invoice number and execute
3 Assign Order Reason and save
4 Create a return delivery and do PGR. Maintain storage location 1030
5 Create Transfer posting in MB1B with movement type 453, storage location 1030 and save
6 Note down the material document reference
7 Go to J1IG to reverse excise issue posting
8 Click "Capture"
9 Key in the material document number and series group
10 Click "Details". Now select the line item and again click "More documents"
11 Key in the original excise invoice reference created at supplying plant
12 Skip all warning message and go back
13 Maintain the internal number and the year.
14 With this, entry from RG23D will be reversed
But still the excise condition values are not being captured during invoice VF01 and std depot routing 356 is being used.
Program name of depot routing is FV64A356.
we can also check Table J_1IRG23D, in this table have value of these Excise Cond. Value.
But Delivery No. is not update in table J_1IRG23D.
Guide me......... -
Sales Order Item Shipping point (VBAP-VSTEL) value in APO table
Hi,
I am looking for Sales Order Item Shipping point (VBAP-VSTEL) value in APO.Can I get this info in APO ?
This information is not available in table /SAPAPO/SDORD or /SAPAPO/SDFIELD.
Basically table /SAPAPO/SDORD is completely blank. Table /SAPAPO/SDFIELD has entry for Sales Order Item but not for VSTEL. Shipping point is there in the Catalog table in ECC and I can see that it is getting imported to APO but why it is not avaibale in SDFIELD table.Any idea ?
I cheked table /SAPAPO/SHIPPING also for the guid (Item guid) but not found any entry .
Please help.RKS,
Most data in SCM is not stored in tables, it is stored in LC. In general, it is not the best idea to use APO for creating custom reports against transactional data. You do such reporting in the OLTP, and you use the standard SAP programs to keep these systems in synch.
Some SD auxiliary data is sometimes stored in /SAPAPO/SD_DOC.and /SAPAPO/SDFIELD. Check here, you might find something useful. No guarantees......
Best regards,
DB49 -
Sales contracts could not coming into the KE24
Hi,
Only sales contracts(VA43) not coming ito the KE24
But whenever we created the sales order with reference to the sales contracts then that time its appearing into the ke24
why only sales contracts(do not having the Sales orders) not coming into the KE24
Is it requires any config for thisHi
Contaract is not standard charactor in co-pa thats y only contract it won be appear in the ke 24 report . if you are using contract with reference to sales order when you are doing the billing system it will take both sale order and coanaract fields it will update in co-pa .
If you want to take contaract in to co-pa without sales order u have to create charactor strics dervation rule in KEDR transaction then it will update in copa . -
Sales order qty not confirmed when delivery done with partial qty
Hi Guru's
Need your help............
We have issue in drop shipment scenario process. Sales order created with 10 line items from CRM and order released from CRM and replicated order to ECC and backend created PR also. After that user set reject status for all items so that PR line items also deleted, again user released rejection status for all items and line items updated in the same PR with different line item number for materials then PO & GR also done in ECC and stock also allocated for sales order line items but still sales order qty not confirmed in CRM sales order.
I checked all configurations regarding availability check but could not found.
Example:
Sales order line item qty: 4 - 2 qty confirmed (delivered).
For remaining qty (2 items)I have done GR. After GR It is allocated to sales order but it is not confirming the order quantity.
plz help me to fix this issue?
regards
saiHi,
Please check In ERP transaction OVZJ, for the sales org, distribution channel, and division that is being used in the affected sales orders, set the Avail. Check Rule to 'E'. Then retest the issue, as this might help.
Regards
Gavin -
Credit Card number entered CRM sales order is not appearing in R3 Sales ord
Hi,
We are entering our Sales orders in CRM which are gtting replicated to SAP R3,In the credit card scenario ,In some sales orders entered in CRM,where the Credit card numer has been entered,In some cases,the card numer is not appearing in R3 Sales order either in the overview screen or Payment card tab,due to ehich most of the times these cards fail authorization .
Kindly let me know as to what could be the reasons as to why the card numer seen in CRM is not appearing in SAP R3,sales order?
Appreciate your help on this.
Regards
Mohammed RoshanHi All,
Looking forward to your valuable inputs on this as to how and why Credit Card number entered CRM sales order iwould not appear in R3 Sales order?
Regards
Mohammed Roshan
Maybe you are looking for
-
I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would s
-
Use of Aggregation tab of key figure
Hello Gurus , Please tell me use of Aggregation tab of key figure , and where it affects ?
-
Can't access my iphone 5s after erase data by 'find my iphone'
I had an iphone 5s and forgot my passcode. I read in apple support that I can erase data by 'Find my iphone' app inside icloud using computer. I did erase the data. However, my phone couldn't start normally. It's been loading for at least 7 hours. Pl
-
BADI - PT_GEN_REQ
Hi, I want to change leave request approver in ESS portal base on our customized relationship in OM. I found that BADI 'PT_GEN_REQ', method 'FIND_RESP_AND_DEFAULT_NEXT_PRC' is the suitable interface to implement this. But I don't know how to start th
-
Dear all ours is planning with final assy(stratagy is 40) while creating PIR through md61, what is the consumption indicator to be used 1 or 2 or 3 what is the difference in our case it is taking bydafault it is taking 1 (consume only with customer r