Variable is changing.... Is this a bug?
I am converting playpositions to labels to make it possible to jump from label to label.
A variable is lost in the process. First it is 1 and then?
The problem is in bold red below.
I think it should work!
Cannot see why not.......
Please help me out?
//array of labels
var labels = ["wasmachine", "grond", "water", "gif", "erosie", "voedsel", "transport", "vervuiling", "energie", "chemicalien", "hennepStart", "hennepGroeit", "bodemverbeteraar", "weinigWater", "Hennep-voedsel", "hennep-energie", "hennep-zonder-vijanden", "hennep-nederland", "stexfibers"]
var labelPositions =[]
//fill array with positions of timeline
for(var i = 0; i<labels.length ; i++)
labelPositions.push(sym.getLabelPosition(labels[i]));
sym.mobielSwipe = function(right)
// working: gives "grond"
console.log("finds array with content"+labels[1]);
//working: gives both 19
console.log("length array labels:" + labels.length +" length array positions:"+labelPosities.length);
var targetLabel;
//where is playhead now?
var currentPosition= sym.getPosition();
//finding in Array
var placeInArray = labelPositions.indexOf(currentPosition);
// finds 0 in array: is still working
console.log("place in array is:"+placeInArray);
//var for new place
var newPlaceInArray;
if(placeInArray>-1)
if(right && placeInArray<labels.length-1)
newPlaceInArray = placeInArray + 1;
//still working... GIVES 1
console.log("swipe right and new place is: "+newPlaceInArray+" type is: "+ typeof newPlaceInArray);
else if (placeInArray>0);
newPlaceInArray = placeInArray-1;
else
newPlaceInArray = 0;
sym.stop(labels[0]);
targetLabel = labels[newPlaceInArray];
//LOGS: in array is:undefined variabele is : -1
console.log("in array is:"+targetLabel+" variabele is : "+nieuwePlekInArray);
handwrited gives "grond"
console.log("met de hand ingevuld:"+labels[1]);
//most important action not working
sym.stop(targetLabel);
No it's not a bug, Oracle will treat "datab" as alias to "dataa" if comma left out.
Doesn't your view has two columns id and datab, but datab column showing dataa data?
Similar Messages
-
I have the local and the remote versions of a page open in two tabs. I change one of the images (keeping the same name in the HTML) and upload the changed image. The tab that shows the remote page only takes a refresh to show the change. The tab showing the local page not. I have tried opening it in a new window but it still does not change. Only if I restart Firefox does it show the change. Why? Is this a bug?
grantheaslip's suggestion doesn't work for me; no change at all. (Thanks anyway.) Any other ideas? Is there another way to "hard" refresh? I don't see anything in the menu.
Also, it seems like this is a very recent problem. I thought in the past that a regular refresh did the job. -
I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.
Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth -
- Firefox 4.0 is used as preferred browser
- One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
- However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
- If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
- Help/ Bug fix is appreciated!- Firefox 4.0 is used as preferred browser
- One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
- However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
- If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
- Help/ Bug fix is appreciated! -
hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.
please help. this issue prevents music from syncing. I have set the sync setting to convert songs to 192kbps AAC to save space, I figure that could slow the sync
down, but it's hanging indefinitely (I've left it for 24 hours with out it completing.)
the the only music that appears on the phone are songs purchased from the iTunes Store. 95% of my collection are rips from my CDs.
thank you for any help!Yeah it's pretty sad that $1000 phone they put out you such cheap memory It causes issues, I have iPhone 6+128 GB actually this is the second brand-new one they gave me because they keep affording it trying to act like that's not the issue because they're too stupid to know how to check what memory is in each one before they give it to me when I have told them multiple times my back up runs perfectly fine on two 5s phones and a 6 64GB of course running MLC memory.
I told them it's because just like the write ups say I have 809 apps but I have not even put all my music on the phone so I'm still running 50 to 60 gigs free and it crashes and reboots itself sometimes in multitasking and more often than it does that in between multitasking I get a black screen for 1 to 2 seconds in between apps and upon start up the Apple logo screen will flicker and do weird things, One of the genius idiots asked me if I could just delete some of my apps, really that's the answer to fix the phone the customer needs to limit the amount to apps they put on their phone, why the **** get a 128 gig if you can't put on anything you want to it guess they need to start selling them saying you can only put a limited number of apps on them, it's really is a **** joke, I have over $20,000 of Apple merchandise easily and always get the new phone every year but I'm starting to reconsider my decisions in the future because this company is starting to go downhill, The reason water not recalling the phones is because they're dealing with their top-of-the-line thousand dollar phones in this case and most people don't have over two or 300 apps so they're not having as many issues, so basically they have messed up phones they just don't know it in their hands and Apple is just too **** greedy to recall the phones, they'd rather sell customer spends that only work half ***.
Stuff like this will be the downfall of their company, all the people that stay with them because as long as you don't jailbreak their stuff it normally just works without issue will be soon jumping ship if stuff like this keeps up, because I can guarantee they got me thinking now.
not that I wanted to know or should I be expected to but I even offered for them to open up my brand-new phone and just replace the memory to MLC memory which is something I shouldn't have to do with a brand-new **** phone, they should just make one with the right memory and give me a new phone, actually just don't sell customers that buy the top-of-the-line phone from you trash ones in the first place that would be a great option.
what burns me up the most is when you talk to AppleCare and Genius Bar they try to act like the issue isn't there and they're unaware of it, they say that Apple hasn't come out with any information about it, yeah that's because they don't want to recall the trash.
Apple has became nothing better than your run-of-the-mill company, android is becoming just as good as they are sad to say this since I have been an Apple fan for so long but there is no excuse for BS like this they have been looking for options to fix my phone for a month now this is not the way you should treat loyal customers, I would've been better off keeping my 5S and in the future just switching to android.
it's pretty sad that the company has no idea how to check which memory is in their **** phone and even after I offered to let them just replace the memory in my new phone by opening up my brand-new phone to replace it they have no idea how to do that either, yeah Genius Bar sure, I think that should change the name to idiot bar and Apple don't care instead of Apple care. -
Is this a bug in OWB 11.2 - importing table metadata for character columns
The Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide provides an overview of the data types supported.
http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm
It says that for VARCHAR2 data type it saws (http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm#CHDFIADI )
"Stores variable-length character data. How the data is represented internally depends on the database character set. The VARCHAR2 data type takes a required parameter that specifies a maximum size up to 4,000 characters"
That means , I guess, it says that when I import a table, any columns of type VARCHAR2(10) in the database should have its length show as characters in OWB, so a column of type Varchar2(10) in the Oracle database, should be shown as Varchar2(10) when imported into OWB table metadata via the OWB import function.
However, if I have a database that set-up as a single-byte and import a table using the OWB import function a column that has a size of e.g. 10 in the database, is imported as OWB table metadata and the size is 10. Correct, I am happy.
However, if the database is modified to support multi-byte characters, ALTUF16 encoding with the semantics set to "CHAR", then when I import the same table into OWB, OWB reports the size as 40, I guess its 40 bytes as in 10 characters @ 4 bytes per character.
Is this a bug in OWB, as the datatype in the Oracle DB is varchar2(10), should OWB after importing a table not also report the column as VARCHAR2(10) ? Currently, is shows the column as varchar2(40).I noticed that myself in our project.
Our varchars2 are defined as VARCHAR2(xxx CHAR) - OWB puts the size*4
In fact if you have special characters like umlauts (ü,ä,ö,...) it will use 4 bytes per character.
You can try it yourself. Define a Varchar2(1 CHAR) and manually change the size of the Column in your mapping inside OWB (in filters, joins or your target table).
Then shoot an umlaut through the mapping and will end up with a "too small" error.
Dont mind the size*4 issue - we totally ignored it and run without error since 4 years now. -
Is this a bug or a simple Newbie mistake?
Hi.
I'm brand new to JavaFX, so I'm probably misunderstanding something. I've searched the web looking for information concerning it, but since it involves the 'new' operator, it's hard to filter down.
Anyhow, here is the problem:
I'm getting different results when I instantiate an object
using the 'new' operator vs. the declaring it the more
accepted JavaFX way.
This is how I found the "problem".
In order to learn how to program in JavaFX, I found a simple game from the Internet, "Blasteroids", to look at (http://www.remwebdevelopment.com/dev/a41/Programming-Games-in-JavaFX-Part-1.html). I copied and pasted this into:
NetBeans IDE 6.9 (Build 201006101454)
JavaFX 1.3 and got the game to work.
In playing around with it, I converted instantiating an object from the "normal" way:
var a: Asteroid = Asteroid
type: type
posX: x
posY: y
moveAngle: moveAngle
velocityX: Math.sin(Math.toRadians(moveAngle))
* randomVelocity
velocityY: -Math.cos(Math.toRadians(moveAngle))
* randomVelocity
rotation_increment: rotation_increment
active: true;
return a;To using the "new" operator:
var a:Asteroid = new Asteroid();
a.type = type;
a.posX = x;
a.posY = y;
a.moveAngle = moveAngle;
a.velocityX = Math.sin(Math.toRadians(moveAngle)) * randomVelocity;
a.velocityY = -Math.cos(Math.toRadians(moveAngle))* randomVelocity;
a.rotation_increment = rotation_increment;
a.active = true;
return a;This is the only changes I made. I would "toggle" back and forth between the two, and I would always get the same results.
When I did this conversion, the ship would show up, but the asteroids were gone. Actually, I think they were invisible because every once and a while, my ship would "blow up" and get reset to it's starting position. I tried adding:
a.visible = true;
But that didn't help.
Indecently, I did the same thing with defining the "Stage" using a new operator, and got differing results:
1. the window would open in the bottom right of my screen (vs filling up
most of my screen. I would have to drag it up to play.
2. it had a regular windows border with the minimize, maximize, close
buttons in the top right (vs. a non-movable, border less window with no
maximize, minimize, close buttons.)
Is this a bug, or am I doing something wrong?
Thank youI suspect you've run into bugs in the Blasteroids program and possibly in Stage in the JavaFX runtime.
For simple cases one would think there should be no difference between this:
var so = SomeObject {
a: 1
b: 2
c: 3
}and this:
var so = SomeObject { }; // or var so = new SomeObject();
so.a = 1;
so.b = 2;
so.c = 3;However, these cases do run through different code paths. In the first case, the init-block of SomeObject sees all the values provided by the caller. In the second case, the triggers on the a, b, and c variables would have to modify the internal state of the object appropriately. If the object has a lot of complex state, the result at the end of setting the three variables (and running their triggers) might not be identical to the object literal after initialization. This is most likely a bug. If an object isn't prepared to have its state variables modified after initialization, it should make them public-init instead of public.
Depending on the object, though, initializing things via an object literal vs. setting variables after initialization might actually have different semantics. This seems to be the case with Stage. The Stage's size is established by its contents at initialization time, and its location at initialization time is determined by using its contents' size and the screen size to center the Stage on the screen. If you create the Stage empty, and then later add contents, the sizing/centering calculations will be based on an empty Stage and will thus give a different result.
Using the object literal technique is idiomatic JavaFX Script, and it's probably more efficient than setting variables after initialization, so I'd recommend sticking with object literals. -
Hi,
Have you ever tried to pass integers from a popup to its
parent after manipulating it?
unfortunately the integer keeps its value in the parent
without applying the changes that happened inside the popup.
So...
Is this a bug or a problem with my code?Actually I passed two variables from the parent to the popup,
one is an array, and the seconed is an integer.
When changing the array inside the popup and adding new
elements to it without referencing it by using the
parentDocument.{the array}, the manipulation was successful and the
parent kept the changes. But when doing the same with the integer,
the parent didn't accept the change and kept its value without
changing, so I had to reference the integer using the
parentDocument.{the integer} which is the opposite of what is
described in the flex mannual under the topic of "passing data from
and to the popup", and that was the reason of my wonder.
Do you have any idea of why is that? -
Could not save changes to this script because of a program error. -2706
OK, this is very odd! Please try the following and let me know your results:
1) Create a new script with the following example code:
set testList to {}
repeat with i from 1 to 8145
copy i to end of testList
end repeat
2) Save the script as an Application (name it whatever you like).
3) Launch the newly created Application and see if you get the same error message I am getting...
*Could not save changes to this script because of a program error.*
-2706
If you replace the number 8145 with 8144 (or any number less than 8145) the script runs without error. Any number greater than 8144 returns the error message shown above. Maybe there's a reason for this that I'm overlooking or is this another bug?
I looked up error code -2706 ([HERE|http://developer.apple.com/Mac/library/documentation/AppleScript/Concept ual/AppleScriptLangGuide/reference/ASLRerrorcodes.html]) which says it is a "*Stack overflow.*"
Thanx in advance for any insight on this!!
NOTE:
The only workaround I've found for this is to make sure the script resets the variable before it quits. Like this:
set testList to {}
repeat with i from 1 to 8145
copy i to end of testList
end repeat
set testList to ""Hey Pierre, thanx for taking the time to scratch your head with me!
Very odd indeed.
Glad it's not just me that thinks this!
I've also noticed that the problem occurs even when you try to save the script as a compiled script. That's possible as long as you haven't run the script. Once you have run it, trying to save it seems impossible. You get the message: *“The document “Document title” could not be saved.”*
I've noticed the same thing as you and have experienced this extra error several times while trouble shooting this problem!
On the other hand, is there any good reason for which you would want to save such a big list? Are there any drawbacks to the workaround you've found?
I don't want to save ANY variable EVER unless I explicitly tell my script to do so! This variable is not a property, so why would my script want to save it? I haven't noticed any drawbacks to the workaround. Setting the list variable to "" or {} (or ANYthing with under 8145 items) seems to work fine. I just find it weird that my script can't "*save changes to itself*"?! What is there to save? It's just a variable that should release after my script has run ...unless I'm completely misunderstanding how variables work after ALL these years of scripting.
Btw, the following version of the script (as you probably already know) is much faster, although it doesn't change anything to the result:
*set testList to {}*
*set testListRef to a reference to testList*
*repeat with i from 1 to 8144*
*copy i to end of testListRef*
*end repeat*
Yeah, it definitely runs much faster this way! I just posted a quick example that would illustrate the 8144 list count limit. My script sets a variable to a list of numbers contained in a text file. This list is almost always rather large! Right now there are over 20,000 items in this list of numbers.
Again, thanx for your time my friend!! -
Sending audio from FCP to Soundtrack doesn't appear to honour variable time changes. The video is of course as expected but the audio is at 100% constant speed.
Can the audio stretching and timeslice tools in soundtrack be used to line up the audio to the video on the fly?Is this a bug that anyone is aware of or something to do with the transfer/send process from my system?
-
I am based in the UK and have just got a new iphone 6, everything works well except when i try to turn on the itunes store app - i can do a search and buy music etc that way, within the app, however, if i go to Music, Movies or the TV shows section within the Store app, i get a message come up saying "Item Not Available" - This item you've requested is not currently available in the UK Store, but it is available in the US store. Tap Change Store to view this item". I therefore cannot browse the music, movies or tv shows sections at all, nothing shows up except that message. All my previous itunes purchases have downloaded ok, and i can access them. My apple ID works fine and restrictions on the iphone are turned OFF. The App Store app works normally. Connection etc is all fine and I can access itunes in the normal way on my ipad and laptop, so this is just an iphone problem. Any ideas? is this a bug? I cant find anyone else with exactly the same problem. By the way, the same message comes up when i click on the red Music icon, on the iphone (situated next to the Safari icon) and then go to the "Store" via that app. my playlists are in tact, but as soon as i click that Store button, I am told that the Item is unavailable - not that i have chosen any Item lol, I just want to access the store in the normal way. Thank you in advance for any suggestions you can give
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
Can anyone help me on the issue which my customer is facing for BoEdge3.1
Concerning Error Message: You do not have enough Named User Licenses to make this user a named user. You have 55 Named User Licenses. (FWB 00013)
This is the error message she was receiving when trying to change an
existing user from Concurrent to Named under the Connection Type on the
Properties panel.
The current workaround was to delete the existing Concurrent user, then re-add the same user as Named.
She have been going through this process of deleting existing users, and then
re-adding them as Named and it was working okay. Then, it stopped
working and she started getting the same FWB 00013 error message again.
She was not able to create any Named users now. Basically, the workaround
worked for a while - then stopped working.
She currently has a total of 88 users. 21 of them are named. 67 of them
are Concurrent. She is licensed for 55 Named.
Once again, the system thinks she has 55 users marked as Named. But
there are only 21 marked as Named.
She did notice that as she was going through all of her existing list of
users, in alphabetical order, she was opening the Properties tab and
checking the Named/Concurrent status - as she got to the 55th user in the
list that is when she started getting the error message again.
Is this a bug with BoEdge3.1?
And I got an ADAPT01194692.
I am not sure that Is the ADAPT related to this issue.
Please help me its very critical.Hi Salena,
If you are an SAP Employee, request you to post this question at
https://cw.sdn.sap.com/community/bobjtc
Cheers,
Subhodeep -
Is this a bug in mx:ComboBox ?
Hi All,
I'm using a mx:ComboBox control in my extension project for InDesign CS5/CS55.5/CS6 using Extension Builder 2.1, Flash Builder 4.6 and Extension Builder 3.4 SDK.
Problem:
When I click my ComboBox control(the text part excluding the down arrow part) after switching application to another and then back to InDesign, the list is shown and then closed quickly. Again if I click on ComboBox then the list is displayed properly.
Is this a BUG in mx:ComboBox ?
Please suggest any solutions/workaround to fix the issue.
ComboBoxTest.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" historyManagementEnabled="false"
initialize="initializeHandler(event)">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.events.DropdownEvent;
import mx.events.FlexEvent;
import mx.events.ListEvent;
[Bindable]
private var cmbBoxItems:ArrayCollection;
private function onComboBoxClick(event:MouseEvent):void{
trace('onComboBoxClick() - '+event);
private function onComboBoxOpen(event:DropdownEvent):void{
trace('onComboBoxOpen() - '+event);
private function onComboBoxChange(event:ListEvent):void{
trace('onComboBoxChange() - '+event);
private function onComboBoxClose(event:DropdownEvent):void{
trace('onComboBoxClose() - '+event);
trace('\n');
protected function initializeHandler(event:FlexEvent):void
cmbBoxItems = new ArrayCollection(["One","Two","Three","Four","Five"]);
]]>
</mx:Script>
<mx:VBox height="100%" width="100%" verticalAlign="middle" horizontalAlign="center" verticalGap="10">
<mx:ComboBox id="testCmbBox" dataProvider="{cmbBoxItems}" click="onComboBoxClick(event)" open="onComboBoxOpen(event)" change="onComboBoxChange(event)" close="onComboBoxClose(event)"/>
</mx:VBox>
</mx:Application>Now I'm sure that its a BUG in mx:ComboBox(Mac OS X Lion, InDesign CS5.5) as I'm able to reproduce in Adobe's Kuler panel also as follows,
Open Kuler panel and switch to Browse tab.
Then switch application(Cmd+Tab) and come back to InDesign.
Then click on any combo-box(Highest Rated or All Time).
We see that the combo-box is not opened for the first time.
Any help/suggestion/workaround is highly appreciated.
Thanks. -
Is this a bug for 10.3.9 installation
Hi everyone especially mac experts
This is my first visit to this forum. I have been using my Powerbook g4 12 inch for 3 - 4 years, never had any problem til now!!
My mac has problem all the sudden, got hacked or something, I dont know, I cannot even restart, it hung since apple logo appear, only way is insert install disc + press C with only one option it allowed me to do "erase and install" no backup no upgrade!!!!
Anyway, that is not my question, it just a whining, my question is when i tried to reinstall with my installation CD that came with my powerbook and/or panther CD with 3 blacks and 1 codeX, which I got it when I was a member of developer connect. The series of problem are as follow
1. during installation of CD2, i got installation failure with error messages said some packages cannot install!!!
2. after i ignore (1), by click "quit" which is only one option anyway, os started to ask me to fill in all information include setting user name and password for admin account. so i did. Then I start to do "software update", and it failed to update/install QuickTime 7.x.x. Then i tried to download only, unpackage and install myself, it has the same results
3. From (2) i search solution on mac website by using winXP, and found that i have to remove some packages in /Library/../receipts/ and reinsert CD 2 again to reinstall, cool.. i will give it a shot. Unfortunately, it asked for admin password and i could not give a correct password, but i remember and have it written down on a paper. Then i check at Preference->account->admin and see it shows 7 digits or * instead of 9 digits. I wonder that someone might hacked into my computer and change it.
Therefore, I decide to reinstall again, this time, i spent more time by include erase disk with option "write zero to disk" and no network connection to make sure there is no trace from hacker! Unfortunately, I got the same problem from (1) to (3) without update software d/l. therefore, i believe (3)is a bug it is obvious from my observation, if i cannot solve (3) i will not be able to solve (1) and (2), and i will not have my mac back to work
Please give me advice, i already lost all my data and spent my weekend trying to fix these problems, which non can be fixed (yet)
Thanks in advanceRoam,
Thanks again for your suggestion,
"Furthermore one should always Repair Permissions both before doing a Software Update and again afterwards."
I honestly dont know anything about this "Repair Permissions" from the name, i though it is a verification of authentication to repair OS or some kind of credential issue, and since i m admin user then there is no point to verify it, i should be allowed to do so. Again it is my first time to do this thing in 3 - 4 years of using panther, every time i update software i never ever do this! If this step is essential for every update and installation why dont apple put them as one of TODO step during the processes (as licensing agreement) instead of keep them as an option (just my thought) Anyway, I m glad u tell me about it, and i will give it a shot tonight.
"That may because you didn't have sufficient disk space. In fact running out of disk space can create all sorts of problems. Please tell me how disk space is available on your
start up drive."
That what I thought coz i have only 5.x GB left in 60 GB HD. Thats why I claimed as whining and have to scarify the lost of data by reinstall panther in order to get my mac back to work
"So are you saying it is a bug or it is a hacker, I don't believe it is either"
Please see second update info about password, and i m not impose anyone to believe, thats why the topic is a questioning sentence "Is this a bug.."
"This Discussion site is not Applecare. The people here give their time voluntarily to those who are receptive to help."
Thats why i ask for "mac expert" not "apple authority/technician" and always appreciate any suggestion.
Anyway, that great to hear from you and i have learned new thing from your suggestion. I will let u know when i have tried it. -
on syncing photos to my iphone from my mac (snow leopard) (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version on iphn?
Thanks for your reply
I solved my problem,
Definitely a bug in syncing through itunes.
- Connect Iphone with MacBook Pro through USB
- Go to iphone on itunes, photos, deselect photo synchronization.
- Sync (all pics will be removed from iphone)
- Close itunes, iphoto, disconnect iphone
- Select in finder: (home)-pictures-iphoto library.
- Sec click on iphoto library and choose "show package contents"
- Delete iPod Photo Cache
- Close finder
- Empty trash
- Reconnect iphone
- Allow photo synchronization again and everything works smooth.
After this, changes made in iphoto are instantaneously reflected in iphone photos.
Once every hundred photos, one gets detached from iphoto and then changes are no longer reflected (buggy) :-(
In this case I erase the photo in iphoto, sync, go back to iphoto trash, reestablish the photo from the trash and sync again.
Hope this improves. Still have to try cloud though.
Thanks
RC -
Is this a bug?: copied movie clip has wrong frame rate and ruins the main movie's sync
Hello,
I am trying to copy a movieclip with a frame rate of 30 frames per second to a movie that has a frame rate of 30 frames per second. Both movies are actionscript 3 movies. When I do this, my copied movie clip's frame rate reverts to 12 frames per second and all my audio synched animation is trashed. Then when I change it back manually to 30 frames per second it makes my main movie's stage animation go crazy at full possible speed and the audio is all out of sync. I have not set export for sharing or action script on this movie clip. I've tried other movie clips that are 30 frames per second and it is all crazy!
Is this a bug? What can I do? I've got 100s of movie clips I need to make. I can't keep remaking them just because flash has a screw loose. I'll go crazy!
-theGiblerOh sorry I goofed! My main time line is 12 fps! I can't belive I didn't see this before.
Maybe you are looking for
-
Hello Experts I am trying do a datapump and I get the error as given below. I tried to use the EXCLUDE=STATISTICS clause, but still I get the same error. Please guide me to move forward. Export: Release 11.2.0.1.0 - Production on Thu Nov 14 13:28:
-
Taking info off an old Imac dv
I am upgrading someones old imacdv to a nice macbook. Trouble is, it's been so long I can't remember the OS9 way of doing things. How can I get information(i.e. word docs, addresses, etc.) off of that computer? I tried putting a cd in and the box jus
-
MacBook using BootCamp - Windows XP Bootup shows display in Portrait Mode
I loaded Windows XP on my MacBook using Bootcamp. Everything was working fine, but now for some reason the display is in Portrait Mode when in XP. Does anyone know how to get the screen back to a normal mode?
-
An SDN'er noticed a comment I made in one of my posts about how Uwe had set me straight about the handle_data_changed method of editable ALV's, and how easy they are to code once one understands how to use that method. She asked me for some help on t
-
i save file but it is like it never saved it. under adobe