Variable name in include

Hi,
I am trying to include the contents of one dynamically created jsp file in another. I have tried all variations of include:
<jsp: include page = "<%=url%>" />
<%
RequestDispatcher rd = request.getRequestDispatcher(url);
try { rd.include(request, response); }
catch (Exception e) { }
%>
<% String url = cid+"/Quizzes/quiz1.jsp";%>
<jsp:directive.include file="<%= url %>" />
Nothing works. I need to access an array that is dynamically created in quiz1.jsp. Can anyone help??

In order to access any variable from the included file you need to store this value as an attribute:
// in the included page
pageContext.setAttribute("myKey", myObject, pageContext.REQUEST_SCOPE);
// in the including page
Object obj = pageContext.findAttribute("myKey");Included pages do not compile along with including pages. They become different servlets.

Similar Messages

Problem with variable name in ZXRSRTOP include (virtual KF)

Hi all,
I am coding a routine to use a virtual key figure in the BEx.
I have just a little problem with the name of a variable:
as explained in the documentation, I created the variable with the prefix G_POS_, the name of the infocube and the name of the infoobject all together:
DATA: G_POS_BC_ST_003_C_DIV__C_COMPAR type i.
The problem is that this variable name is longer than 30 characters, so the system doesn't accept it.
Is there a workaround, other than changing the name of the infoobject (which is a navigational attribute)?
Any help would be appreciated.
Loï

Hello Marc,
I understand that I have to use a concatenate function and a dynamic call of the variable with (variable) instruction, but i do not understand how to implement it.
the infocube name is BC_ST_003
the characterisdtic name is C_DIV__COMPAR
So, in the include ZXRSRTOP the statement
DATA : G_POS_BC_ST_003_C_DIV__COMPAR
does not work due a length problem (see first post)
But in the same include the statement
+DATA: l_global_name type c.
concatenate 'GPOS' 'BC_ST_003' 'C_DIV__C_COMPAR' into l_global_name separated by '_'.+
drives to the following error : statement is not accessible.
Could u please provide me with an example of the code in the include ZXRSRTOP, and in the include ZXRSRZZZ for the use of this variable.
Thanks in advance.
Loï

SAP BODS XI 3.2 - batch job, global variable, name includes apostrophe - why failing?

Global Variable in batch job used to define user access (add/update/remove) - how do we handle the inclusion of an apostrophe in a name?
Tested with wildcard prior to apostrophe, still failing.
Any clues, please?
Thank you.

I believe you can not use any special characters in global variables name.

A variable in the include directive

Hello,
I'm trying to store a part of the name of the file to include in a variable like this:
<%@ include file=templatepath + "settings.jsp" %>
but it doesn't work. Can someone tell me if there is a working way to do something similar
Thanks,
Store

You can use the jsp:include tag to specify the page to include dynamically.
<jsp:include page="templatepath + "settings.jsp" flush="true"/>You can't use the include directive to dynamically specify a page since the page is included at compile time, rather than run time.

How to check Variable Names

Hi All,
I am checking in CMOD include. It has lot of code. Example: When 'ZFISPER' . I think that is Variable Technical name. How to check that variable and in Which Query it is.
Please let me know...
Thanks in advance..
KN

Hello,
You can go over into transaction code RSA1 and then on your left hand side you will be able to see lot of tabs in terms of Modeling, Administration, Transport Connection and so on.
So go ahead and click on the tab "Transport Connection" and in the next screen you will be able to see all object types available in your environment.
Please go ahead and open up the section "Query Elements", if you are not able to see the same, on the left under the transport connection you will see the folder "SAP Transport" and within that the option called "Object Types", just click on it once and all the object types which are available for transports will show up.
Once you have selected Query Elements, under that you will be able to see different Query related objects and you will be having "Variable". When you drilldown on Variable folder you can double click "Select Objects" and select your appropriate variable name.
One other way to proactively get a list of variables available in your system and to find out on which InfoObject they have been buill, please go into transaction se16 or se12 and then enter the table name RSZGLOBV.
In this table you can get a list of all the variables along with the metadata without trying to parse through one by one variable.
Thanks
Dharma.

How to find Query name using Variable name (by Customer exit code in CMOD).

Dear SDN,
Enhancement name RSR00001.....Function Module name.....EXIT_SAPLRRSO_001...Include ZXRSRU01...
Some x variable coding in done here.
How can I find out the Query name for the X variable?
Wating for reply...
Thanks & Regards,
Praveen.K

Dear,
I have got answer..
Method 1 :Right click on variable in Query Designer and find the where used list.
Method 2 : SE16--> RSZGLOBV -->Enter the variable VNAM as 'Variable Name' ->Get the VARUNIID> Go to table RSZELTXREF --> Enter the values of VARUNIID in TELTUID --> Get the list of SELTUID --> Go to table RSZCOMPDIR --> Enter the values of SELTUID in COMPUID --> Get the list of COMPID -->COMPID is the list of queries
Thanks & Regards,
Praveen.K

How to get names of INCLUDE or FORM within included forms

Hello,
I want to get names of Include program and included form within included forms.
I tried SY-REPID or SY-CPROG but these two SYST variables return the name of report program that performs the form, not the name of Include or form.
Please give me any advice about how to get names of include / included form.
thanks and regards,
Hozy

You can use the statement
READ REPORT <Report name> into itab
to read the source code into an internal table.
Later you can use the "Contains Pattern" operator to get the statements that you need.

How to output variable names and units used in binary file

My colleague will be giving me binary files (*.dat) generated from within LabView. There are over 60 variables (columns) in the binary output file. I need to know the variable names and units, which I believe he already has set up in LabView. Is there a way for him to output a file containing the variable name and unit, so that I'll know what the binary file contains? He can create an equivalent ASCII file with a header listing the variable name, but it doesn't list the units of each variable.
As you can tell I am not a LabView user so I apologize if this question makes no sense.
Solved!
Go to Solution.

Hi KE,
an ASCII file (probably csv formatted) is just text - and contains all data that is (intentially) written to. There is no special function to include units or whatever!
Your collegue has to save those information the same way he saves the names and the values...
(When writing text files he could use WriteTextFile, FormatIntoFile, WriteToSpreadsheetFile, even WriteBinaryFile could be used...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Appemding variable names

I need to append variables names
but i am having a problem
the names are trated like a number and it's trying to add
them together. and i need to conbine them.

I don't think it's a variable declaration issue. Here is the
code I'm using to add a video stream to the stage:
var vid0 = new Video();
var customClient0:Object = new Object();
customClient0.onCuePoint = cuePointHandler0;
customClient0.onMetaData = metaDataHandler0;
nc0 = new NetConnection();
nc0.connect(null);
ns0 = new NetStream(nc0);
ns0.addEventListener(NetStatusEvent.NET_STATUS, netstat0);
ns0.client = customClient0;
vid0.attachNetStream(ns0);
vid0.x = 100;
vid0.y = 100;
ns0.play("myvideo.flv");
addChild(vid0);
function netstat0(stats:NetStatusEvent){
function cuePointHandler0(infoObject:Object):void{
trace('cue:'+infoObject.time);
function metaDataHandler0(infoObject:Object):void{
trace('meta:'+infoObject.duration);
I would like to replace the first line with something like:
var numVideos:int=1;
for (var i:int = 0; i < numVideos; i++) {
this["vid"+i] = new Video();
to create a var named 'vid0' that has a new Video. The output
error I get is: "Variable vid0 is not defined". It might simply be
that I can't do this and that I'll have to create a seperate video
instance for each of the possible number of videos that may be
included (list of videos is from an xml file).
Thanks ...

Same variable name causes major issues.....

I would like to get some input and possible direction on the issue below... I am new to PL/SQL. Thanks in advance.....
..... The system is in the middle of processing a “For” step, i.e. a given “For” step is incomplete.
..... The script instructs the system to process a second “For” step with the same “for-loop variable” as the incomplete “For” step.
When the above takes place, the system processes the second “For” step incorrectly. Instead of starting at the first value in the second “For” step’s list of values, the system begins in the middle of the value list.
I need to change the current implementation so that if a "For" loop is encountered that has the same “loop variable” as a “For” loop already being executed, the “state” of the previous “For” step is discarded, and the state for the new “For” step is initialized to the first value in its list.
-- Used for "for" steps
TYPE for_list is table of varchar2(4000) index by binary_integer;
TYPE for_loop_state is record (
list for_list,
next_index integer
TYPE for_loops_list is table of for_loop_state index by steps.output_param%TYPE;
all_for_loops for_loops_list;
procedure for_step(list_string IN varchar2, ret_var_name IN varchar2, end_for_label IN varchar2) is
state for_loop_state;
end_idx number;
list_value varchar2(4000);
begin
pkg_util.log('ret_var_name value after begin: ' || ret_var_name, 'I');
-- get the current for list state, based on its output variable name
if all_for_loops.exists(ret_var_name) then
state := all_for_loops(ret_var_name);
else
state.next_index := 0;
list_value := parse_next_param(list_string, 1, end_idx);
-- end_idx is thrown away; for loops only have 1 input parameter (the list)
state.list := get_for_list(list_value);
all_for_loops(ret_var_name) := state;
end if;
if state.next_index < state.list.count then
pkg_session_values.put(ret_var_name, state.list(state.next_index));
all_for_loops(ret_var_name).next_index := state.next_index + 1;
else
all_for_loops.delete(ret_var_name);
jump(end_for_label);
end if;
end;

There is so much of your code hidden from view it is impossible to tell you anything other than perhaps suggest a methodology.
Create a single variable with a known value and use dbms_output to view it as it steps through each piece of the puzzle. Determine when the value does something you don't want.

Using a variable's definition as a variable name

I have a string variable with definition I need to use as a
variable name.
For example, this is super simplified:
var newVariable = 'it is working';
var partOne:String = 'new';
var partTwo:String = 'Variable';
var partThree = partOne + partTwo;
trace("my variable is " + partThree);
Instead of tracing partThree as literally partOne + partTwo
(which traces "newVariable") i'd like it to trace the
Definition of partOne + partTwo (which is "it is working").
I hope this makes sense, help or advice is
appreciated.

...
var partThree = this[partOne + partTwo];
trace("my variable is " + partThree); //will trace: my
variable is it is working
TS

How to declare internal table in BADI with variable name beginning with 0..

Gurus,
How to declare an internal table within a BADI. I have to implement a BADI UC_TASK_CUSTOM for BCS to BW load and there i have to declare an internal table like:
TYPES:          BEGIN OF t_cube_data,
                0cs_version       TYPE /bi0/oics_version,
                0sem_cgcomp       TYPE /bi0/oisem_cgcomp,
                bcs_vers          TYPE /bic/oibcs_vers,
                bcs_lcus          TYPE /bic/oibcs_lcus,
                bcs_ldch          TYPE /bic/oibcs_ldch,
                bcs_invcom       TYPE /bi0/oibcs_invcom,
                bcs_litem         TYPE /bic/oibcs_litem,
                bcs_llob          TYPE /bic/oibcs_llob,
                bcs_lmay          TYPE /bic/oibcs_lmay,
                0move_type        TYPE /bi0/oimove_type,
                pcompany         TYPE /bi0/oipcompany,
                bcs_lprg          TYPE /bic/oibcs_lprg,
                figlxref3         TYPE /bic/oifiglxref3,
                fiscyear         TYPE /bi0/oifiscyear,
                fiscper3         TYPE /bi0/oifiscper3,
                fiscvarnt        TYPE /bi0/oifiscvarnt,
                curkey_gc        TYPE /bi0/oicurkey_gc,
                unit             TYPE /bi0/oiunit,
                cs_trn_gc        TYPE /bi0/oics_trn_gc,
                cs_trn_qty       TYPE /bi0/oics_trn_qty,
          END OF t_cube_data
But with this declaration it gives a error saying that u cannot have a variable beginning with 0...like 0cs_version....
but i have to do it for my functionality to wrk...
Please help me do it....
how can i declare a internal table that allows me to have variable names that start with 0....
Please help....Its URGENT....
Thanks
Sam

Murali,
I need to have 0 before the variable name in the declaration of the internal table....how can i attain that....
Please suggest...
Thanks
Sam

Is it possible to add a property using variable in variable name?

I want to query for a list of virtual machines within a folder, then create a menu of the host names using forms. Since the list of machines is subject to change, I want to build the list each time the script is run, rather than build off a static
list.
For each virtual machine I need to create the list of variables below:
$hostnameX = New-Object System.Windows.Forms.checkbox
$hostnameX.Location = New-Object System.Drawing.Size(10,20)
$hostnameX.Size = New-Object System.Drawing.Size(100,20)
$hostnameX.Checked = $true
$hostnameX.Text = "Type"
$hostnameX.Controls.Add($hostnameX)
The location and size values need to be incremented but I think I can figure that part out.
I can use New-Variable to generate the initial variable. But I receive errors using the same method to try to create a new property for the variable.
$VMS = Get-Cluster MyCLUS | Get-vApp "My vApp" | Get-VM | Select Name,PowerState | Sort Name
For ($i=0; $i -lt ($VMS.count); $i++)
$VMS[$i].Name
$VMGUEST = "$($VMS[$i].Name)" -replace("-","")
New-Variable "CB$VMGUEST" "New-Object System.Windows.Forms.checkbox"
New-Variable "CB$VMGUEST.Location" "New-Object System.Drawing.Size(10,20)"
In the above, $CBVMGUEST1 = New-Object System.Windows.Forms.checkbox which is what I want, but $CBVMGUEST1.Location is not set.
Is there way to add a property using a variable in the variable name? Or any other suggestions on how to tackle this issue?

Hi,
maybe another approach is a bit easier.
Use a hash-array like
$CB = @{}
$CB[$VMGUEST] = New-Object System.Windows.Forms....
$CB[$VMGUEST].Location = New-Object System.Drawing....
Mit freundlichen Grüßen Jens Kalski
That's the correct answer. Anytime you find yourself wanting to create variables named "Widget1", "Widget2", "Widget3", etc... it's a pretty clear indication that what you really need is a collection object of some sort. That might be an array,
a hashtable, or any other data structure for holding other objects, depending on your specific needs.

Error while using the variable name "VARIABLE" in variable substitution

Hi Experts,
I am using variable substitution to have my output filename set as a payload field value. It is working fine when I am using the variable name as fname, subs etc but channel goes in error when I am using the variable name as "VARIABLE". This is probably a reserved word but i would like to know where i can find a detailed documentation on this. Say things to note / restrictions while using variable substitution.
This is the error in the channel:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: java.text.ParseException: Variable 'variable' not found in variable substitution table: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: java.text.ParseException: Variable 'variable' not found in variable substitution table
Thanks,
Diya

Hi Zevik,
Thanks for the reply. The output file is created correctly by merely changing the variable name to something else and hence the doubt.
Below is the configuration:
Variable Substituition
VARIABLE payload:interface_dummy,1,Recordset,1,Header,1,field1,1
Filename schema : TEST_%VARIABLE%.txt
Output xml structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:interface_dummy xmlns:ns="http://training.eu.unilever.com">
- <ns:Recordset xmlns:ns="http://training.eu.unilever.com">
- <Header>
<identifier>HDR</identifier>
<field1>001</field1>
<field2>001</field2>
<field3>R</field3>
</Header>
- <Detail>
<identifier>A</identifier>
<field1>000000002</field1>
<field2 />
<field3>Doretha.Walker</field3>
</Detail>
I thimk my configuration is correct as it is working correctly with the variable name change, However, maybe i missed something !

Servicegen - Issue with Variable Names - WLS 8.1

Hi Experts
I am trying to expose an EJB as a Webservice.. I assembled the ear using SERVICEGEN exposed by Weblogic 8.1
To my dismay the generated WSDL (even the web-services.xml) are not having the variable names which I gave in my webservice method. Instead I get String, String0, String1 and so on...
Kindly help me get over this problem.
Thanks and Regards,
Gopal.

your application miight not be using this libraries but there are many shared libraries which are configured could be using. please check whether config.xml file of your domain contains the entries for this library.Problem running simple portal tutorial question

Variable name in include

Similar Messages

Maybe you are looking for