How to declare internal table in BADI with variable name beginning with 0..

Gurus,
How to declare an internal table within a BADI. I have to implement a BADI UC_TASK_CUSTOM for BCS to BW load and there i have to declare an internal table like:
TYPES:          BEGIN OF t_cube_data,
                0cs_version       TYPE /bi0/oics_version,
                0sem_cgcomp       TYPE /bi0/oisem_cgcomp,
                bcs_vers          TYPE /bic/oibcs_vers,
                bcs_lcus          TYPE /bic/oibcs_lcus,
                bcs_ldch          TYPE /bic/oibcs_ldch,
                bcs_invcom       TYPE /bi0/oibcs_invcom,
                bcs_litem         TYPE /bic/oibcs_litem,
                bcs_llob          TYPE /bic/oibcs_llob,
                bcs_lmay          TYPE /bic/oibcs_lmay,
                0move_type        TYPE /bi0/oimove_type,
                pcompany         TYPE /bi0/oipcompany,
                bcs_lprg          TYPE /bic/oibcs_lprg,
                figlxref3         TYPE /bic/oifiglxref3,
                fiscyear         TYPE /bi0/oifiscyear,
                fiscper3         TYPE /bi0/oifiscper3,
                fiscvarnt        TYPE /bi0/oifiscvarnt,
                curkey_gc        TYPE /bi0/oicurkey_gc,
                unit             TYPE /bi0/oiunit,
                cs_trn_gc        TYPE /bi0/oics_trn_gc,
                cs_trn_qty       TYPE /bi0/oics_trn_qty,
          END OF t_cube_data
But with this declaration it gives a error saying that u cannot have a variable beginning with 0...like 0cs_version....
but i have to do it for my functionality to wrk...
Please help me do it....
how can i declare a internal table that allows me to have variable names that start with 0....
Please help....Its URGENT....
Thanks
Sam

Murali,
I need to have 0 before the variable name in the declaration of the internal table....how can i attain that....
Please suggest...
Thanks
Sam

Similar Messages

How to store internal table value in single variable

hi gurus,
i have 3 value in int table , so want to store the value of int table into single variable of type string.
how it is possible

hmmm, your requirement is kinda weird and you could have given us a bit more info, but well lets start.
Why is your requirement weird?
Well an internal table kinda is a variable itself, or rather a set of variables which together make up for a line type of your table.
So you have a value you already have in a variable and now want to store it in anotherone? Seems weird.
What type is your internal table?
Do you have those three values in one record or in three records which only hold one value each?
Which of your values do you want to store in another variable?
Anyway, make a F1 on the "READ TABLE" statement, this should definiteley help you.
The "LOOP AT WHERE" statement could as well help if there should occur probrlem using READ TABLE.
/edit DAMn i was posting this while you gave us more info.
So still the question stays if you got your three values in one record or in three records.
DATA: lv_variabl_containing_all type char100.
loop at itab into wa.
concatenate lv_variabl_containing_all wa-value into lv_variabl_containing_all seperated by space.
endloop.
after the loop you now got all your values in lv_variabl_containing_all.
That is for the case you got three records.
other case would be
Read table itab into wa index 1.
concatenate wa-value1 wa-value2 wa-value3 into lv_variabl_containing_all.
Edited by: Florian Kemmer on Apr 16, 2010 12:59 PM

How to declare internal table in SMARTFORM

Hi experts,
I have an Internal table in my program and I want to declare in the smartform as well. How and where can I declare? Should I use global definitions and tpyes tab? How can I pass the content of the internal table to the smartform?

Click Global Defiitions
In TYPES :
TYPES : BEGIN OF gty_add,
         name1      TYPE ad_name1,                          " name1
         city1      TYPE ad_city1, " City
         country    TYPE adrc-country, "Coutnry
         post_code1 TYPE ad_pstcd1, " post code
         street     TYPE ad_street, " street
         house_num1 TYPE ad_hsnm1, " house number
         tel_number TYPE ad_tlnmbr1," tele number
        END OF gty_add.
In Global DATA
GT_ADD     TYPE TABLE OF     GTY_ADD ( Internal table)
WA_ADD     TYPE     GTY_ADD ( work area)

HR abap : how to declare internal table to fetch data from 0585 infotype

Hi all ,
I am able to fetch the data from pa0585 infotype for set of employee no , but the problem is as the fields in pa0585 (like Contr to ULIP , NSC , Medical Treatment,Contribution to Certain Pension Funds so on ..) will be changed dynamically and will be displayed based on the amount value in descending order iam not able to store the values of the fileds into internal table . I dont understand how to declare the internal table ..Please help in if u have solved this kind of problem.
I shld get the output in this way ...
Emp No     Name    Medical treatment       Contr to ULIP             ....... so on
101          abc           10000                        150000                      .......so on
102          xyz           12000                        150000                      .......so on
My header shld be fixed and I shld display values in this way .... I can use write statement to display directly .
Thanks ....

Hi
Decalre INFOTYPE
Goto SE37 - Find FM -
READINFOTYPE*

CFUPDATE problem with field name beginning with a number

I have a form (actually several) that is gathering data for a survey. I tried to use cfupdate to update the data elements and got a string index out of range error. I tested again without the form fields that began with numbers and it worked just fine. I then tried to enclose the offending field names in () and []. Both times I got same error. Does anyone have a work around for this? The code and error are below.
Changing the field names is not really an option. This survey has almost 400 data points and most of the fields begin with the question number.
Thanks
DW
<cfupdate datasource="#application.fdp_datasource#" tablename="arra_survey1" dbtype="ODBC" formfields = "entry_no, 2_a_fy09, '2_a_fy10', '2_a_fy11', '2_a_fy12', '2_b_fy09', '2_b_fy10', '2_b_fy11', '2_b_fy12', '2_c_fy09', '2_c_fy10', '2_c_fy11', '2_c_fy12', '2_d_fy09', '2_d_fy10', '2_d_fy11', '2_d_fy12', '2_e_fy09', '2_e_fy10', '2_e_fy11', '2_e_fy12', '2_f_fy09', '2_f_fy10', '2_f_fy11', '2_f_fy12', '2_g_fy09', '2_g_fy10', '2_g_fy11', '2_g_fy12', '2_h_fy09', '2_h_fy10', '2_h_fy11', '2_h_fy12', '2_i_fy09', '2_i_fy10', '2_i_fy11', '2_i_fy12', '2_j_fy09', '2_j_fy10', '2_j_fy11', '2_j_fy12', '2_k_fy09', '2_k_fy10', '2_k_fy11', '2_k_fy12', '2_l_fy09', '2_l_fy10', '2_l_fy11', '2_l_fy12', central_office, dept_office, incl_other, 3_a_fy09, 3_a_fy10, 3_a_fy11, 3_a_fy12, 3_b_fy09, 3_b_fy10, 3_b_fy11, 3_b_fy12, 3_c_fy09, 3_c_fy10, 3_c_fy11, 3_c_fy12, 3_d_fy09, 3_d_fy10 3_d_fy11, 3_d_fy12, 3_e_fy09, 3_e_fy10, 3_e_fy11, 3_e_fy12, 3_f_fy09, 3_f_fy10, 3_f_fy11, 3_f_fy12, 3_g_fy09, 3_g_fy10, 3_g_fy11, 3_g_fy12, 3_h_fy09, 3_h_fy10, 3_h_fy11, 3_h_fy12, 3_i_fy09, 3_i_fy10, 3_i_fy11, 3_i_fy12, 3_j_fy09, 3_j_fy10, 3_j_fy11, 3_j_fy12, 3_k_fy09, 3_k_fy10, 3_k_fy11, 3_k_fy12, 3_l_fy09, 3_l_fy10, 3_l_fy11, 3_l_fy12">
String index out of range: -2
The error occurred in C:\Inetpub\wwwroot\directory\process_arra_suvey_2.cfm: line 12
12 : <cfupdate datasource="#application.fdp_datasource#" tablename="arra_survey1" dbtype="ODBC" formfields = "entry_no, 2_a_fy09, '2_a_fy10', '2_a_fy11', ...

I think you have run one of CFUPDATE's limitations. I am not 100% certain, but I do not think cfupdate provides a way to escape invalid column names like yours. In which case you may need to do a regular UPDATE within a cfquery instead... or rename your columns.
fields that began with numbers
Most databases discourage creating column names that start with a number (or other restricted characters). While many databases will allow you to escape invalid names, it is simpler all around to avoid them altogether. Otherwise, you may have to escape the names in every single query. The recommendations vary, but usually object names that begin with a letter, and contain only letters, numbers and underscores are considered safe.
This survey has almost 400 data points and most of the fields begin with the question number.
Four-hundred (400) is a lot of columns for a single table. The fact that they all them seem to contain the same type of information (ie response to a question) is an indication that data should probably be stored in a separate table, as rows, not columns. For example questions could be stored in one table, possible answers in another, and the results of an individual test/survey stored in a third table. A structure like that is much easier to query, can easily accommodate changes (add/remove questions, responses, etcetera) without having modify the table every time.

Internal table in badi

Hello friends,
I am working with Badi's and my requirement is i need to fetch the data from database in badi method and have to use that data in my abap program.
So, is there any way i can declare internal table as export parameter of badi method or else if I declare internal table in my abap program and export that while calling badi method then how to declare internal table as import parameter in badi method.

Some things are not clear here..
1 - You have a ABAP Program that trigger's a process that calls a BADI and then return to your ABAP Program
OR
2 - You have implemented a BADI in a process that runs separately from the ABAP Program, and you need to grab data from the BADI into your Program?
I`d suggest:
1 - Try to use a static method or a static class with a method that would "hold the data" from the badi into you memory. You could use methods like SET_INT_TABLE in BADI and then GET_INT_TABLE in your ABAP Prog.
2 - Not sure why you want to do this, but use a Z table.
Regards
Edited by: Mauricio Roberto Cruz on Feb 11, 2011 2:26 PM

How to populate internal table field with text data?

Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test,     IO Test 1, CHAR,       20
ZEA_IO2, CHA, IO Test,     IO Test 2, CHAR,       20
Here is the Code:
*& Report ZAS_BAPI_TEST                                               *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects.              *
*& Text file will hold the Info Object Structure. Text file will be    *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure          *
*& Step 2. Retrieve/Load text file into Internal Table structure       *
*& Step 3. Call BAPI Function to Create IO                             *
*& Step 4. Call BAPI Function to Activate IO                           *
REPORT ZAS_BAPI_TEST                           .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
      Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
        io_name like BAPI6108-infoobject,
        io_type like BAPI6108-type,
        io_txsht like BAPI6108-textshort,
        io_txlng like BAPI6108-textlong,
        io_datatype like BAPI6108-datatp,
        io_length like BAPI6108-intlen,
      END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
      PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
     Copy the file from the workstation to the server        ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                = p_file
               FILETYPE                = 'ASC'
               HAS_FIELD_SEPARATOR     = SPACE
               HEADER_LENGTH           = 0
               DAT_MODE                = SPACE
               CODEPAGE                = SPACE
               IGNORE_CERR             = ABAP_TRUE
               REPLACEMENT             = '#'
               READ_BY_LINE            = 'X'
             IMPORTING
               FILELENGTH              =
               HEADER                  =
TABLES
    data_tab                = itab-bapi[]
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
   ELSE.
     pit_data[] = lit_data[].
   ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
           20 itab-bapi-io_type,
           30 itab-bapi-io_txsht,
           50 itab-bapi-io_txlng,
           75 itab-bapi-io_datatype,
           85 itab-bapi-io_length.
endloop.
      SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_filename     = ''
      def_path         = 'C:\'
      mask             = ',Documentos de texto (*.txt), *.txt.'
      mode             = ''
    IMPORTING
      filename         = p_file
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
    concatenate p_file '.txt' into sel_file.
else.
    sel_file = p_file.
endif.
      Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
    VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
    VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
    VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
     COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
     ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
     NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
     ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
     HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
     ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
     RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
      Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM.                    " RETRIEVE_DATASET
I appreciate your help.
Regards,
Mau

I have used tab delimited file.
Here are file contents
io_name     io_type     io_txsht     io_txlng     io_datatype     io_length
ZEA_IO1     CHA     IO Test     IO Test 1     CHAR     20
ZEA_IO2     CHA     IO Test     IO Test 2     CHAR     20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

How to disply internal table with grid format .

HI ,
how to disply internal table with grid format .
Regards
venkat

Grid format can be disaplyed using two ways,
1. Using reuse_alv_grid_display
2. using object oriented ABAP with the methos set_table_for_first_display.
For example program search in where used list for standard SAP programs.
If this is not the answer then please explain your issue in detail
Thanks,
Rama Krishna

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
      W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
      P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
      MY_MONTH type T549Q-PABRP,
      STR_MY_MONTH(2) type C,
      MY_YEAR type T549Q-PABRJ,
      STR_MY_YEAR(4) type C,
      CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
      ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
        INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
   CMD like PC408-LTYPE value '/:', "command
   TXT like PC408-LTYPE value 's',   "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
      DOCDATA like SODOCCHGI1,
      OBJTXT like SOLISTI1 occurs 10 with header line,
      OBJPACK like SOPCKLSTI1 occurs 1 with header line,
      RECLIST like SOMLRECI1 occurs 1 with header line,
      OBJHEAD like SOLISTI1 occurs 1 with header line,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_buffer type string,
      l_no_of_bytes TYPE i,
      l_pdf_spoolid LIKE tsp01-rqident,
      l_jobname     LIKE tbtcjob-jobname.
data: file_length type int4,
      spool_id     type rspoid,
      line_cnt     type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN                                                  *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
*                                 "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
*                                 "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
*                                 "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
    ITAB-PERNR      = P0001-PERNR.
    ITAB-ABKRS      = P0001-ABKRS.
    ITAB-ENAME      = P0001-ENAME.
    ITAB-USRID_LONG = P0105-USRID_LONG.
    append itab.
    clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area        : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time         : ', SY-UZEIT.
write : / 'User Name           : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
    clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
    refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
*                                                  Retrieve Payroll results sequence number for this run
    select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
                                    and FPBEG ge W_BEGDA
                                    and FPEND le W_ENDDA
                                    and SRTZA eq 'A'.
*                                                  Produce payslip for those payroll results
    if SY-SUBRC = 0.
      call function 'GET_PAYSLIP'
        EXPORTING
          EMPLOYEE_NUMBER = ITAB-PERNR
          SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
          PAYSLIP_VARIANT = PAY_VAR
        IMPORTING
          RETURN          = RETURN
          P_INFO          = P_INFO
        TABLES
          P_FORM          = P_FORM.
      check RETURN is initial.
*                                                 remove linetype from generated payslip
      loop at p_form.
        objbin = p_form-linda.
        append objbin.
        line_cnt = line_cnt + 1.
      endloop.
      file_length = line_cnt * 1022.
*                                                 create spool file of paylsip
      CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
        EXPORTING
          i_file_length = file_length
        IMPORTING
          e_spoolid     = spool_id
        TABLES
          it_textdata   = objbin.
      IF sy-subrc EQ 0.
        WRITE spool_id.
      ENDIF.
      DESCRIBE table objbin.
      DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
          SRC_SPOOLID                    = spool_id
          NO_DIALOG                      = ' '
          DST_DEVICE                     = 'MAIL'
*      PDF_DESTINATION                =
*    IMPORTING
*      PDF_BYTECOUNT                  = l_no_of_bytes
*      PDF_SPOOLID                    = l_pdf_spoolid
*      LIST_PAGECOUNT                 =
*      BTC_JOBNAME                    =
*      BTC_JOBCOUNT                   =
        TABLES
          PDF                            = pdf
        EXCEPTIONS
          ERR_NO_ABAP_SPOOLJOB           = 1
          ERR_NO_SPOOLJOB                = 2
          ERR_NO_PERMISSION              = 3
          ERR_CONV_NOT_POSSIBLE          = 4
          ERR_BAD_DESTDEVICE             = 5
          USER_CANCELLED                 = 6
          ERR_SPOOLERROR                 = 7
          ERR_TEMSEERROR                 = 8
          ERR_BTCJOB_OPEN_FAILED         = 9
          ERR_BTCJOB_SUBMIT_FAILED       = 10
          ERR_BTCJOB_CLOSE_FAILED        = 11
          OTHERS                         = 12
      IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename = 'C:\itab_to_pdf.pdf'
      filetype = 'BIN'
    TABLES
      data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
*    TRANSLATE pdf USING ' ~'.
*    CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
*    it_mess_att = gd_buffer.
*    APPEND it_mess_att.
*    SHIFT gd_buffer LEFT BY 255 PLACES.
*    IF gd_buffer IS INITIAL.
*      EXIT.
*    ENDIF.
* ENDDO.
      OBJHEAD = 'Objhead'.
      append OBJHEAD.
* preparing email subject
      concatenate W_ENDDA(6)
                ' Payslip-'
                ITAB-ENAME+0(28)
                ITAB-PERNR+4(4) ')'
             into DOCDATA-OBJ_DESCR.
      DOCDATA-OBJ_NAME = 'Pay Slip'.
      DOCDATA-OBJ_LANGU = SY-LANGU.
      OBJTXT = 'Pay Slip.'.
      append OBJTXT.
*prepare email lines
      OBJTXT = DOCDATA-OBJ_DESCR.
      append OBJTXT.
      OBJTXT = 'Please find enclosed your current payslip.'.
      append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
      read table OBJTXT index 3.
*    DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
      clear OBJPACK-TRANSF_BIN.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = 3.
      OBJPACK-DOC_TYPE = 'RAW'.
      append OBJPACK.
* Create Message Attachment
      ATT_TYPE = 'PDF'.
      describe table OBJBIN lines TAB_LINES.
      read table OBJBIN index TAB_LINES.
*    OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
      OBJPACK-TRANSF_BIN = 'X'.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = TAB_LINES.
      OBJPACK-DOC_TYPE = ATT_TYPE.
      OBJPACK-OBJ_NAME = 'ATTACHMENT'.
      OBJPACK-OBJ_DESCR = 'Payslip'.
      append OBJPACK.
* Create receiver list refresh RECLIST.
      clear RECLIST.
      RECLIST-RECEIVER = itab-USRID_long.
      translate RECLIST-RECEIVER to lower case.
      RECLIST-REC_TYPE = 'U'.
      append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
      call function 'SO_DOCUMENT_SEND_API1'
        exporting
          DOCUMENT_DATA = DOCDATA
          PUT_IN_OUTBOX = 'X'
          COMMIT_WORK = 'X'
* IMPORTING
*   SENT_TO_ALL =
*   NEW_OBJECT_ID =
        tables
          PACKING_LIST = OBJPACK
          OBJECT_HEADER = OBJHEAD
          CONTENTS_BIN = pdf
          CONTENTS_TXT = OBJTXT
*   CONTENTS_HEX =
*   OBJECT_PARA =
*   OBJECT_PARB =
          RECEIVERS = RECLIST
        exceptions
          TOO_MANY_RECEIVERS = 1
          DOCUMENT_NOT_SENT = 2
          DOCUMENT_TYPE_NOT_EXIST = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR = 5
          X_ERROR = 6
          ENQUEUE_ERROR = 7
          others = 8.
      if SY-SUBRC NE 0.
        ITAB-MTEXT = 'Message Not Sent to : '.
      else.
        ITAB-MTEXT = 'Message Sent to : '.
      endif.
*    else.
*      ITAB-MTEXT = 'Message Not Sent to : '.
*    endif.
    else.
      "SY-SUBRC Not = 0
      ITAB-MTEXT = 'Payroll data not found : '.
    endif.
    "end of SY-SUBRC = 0.
    modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
    at new MTEXT.
      uline.
      write : / ITAB-MTEXT color 4 intensified on.
      write : / 'Emp. Code' color 2 intensified on,
             12 'Emp. Name' color 2 intensified on,
             54 'Email ID' color 2 intensified on.
    endat.
    write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

How to Convert internal table data into text output and send mail in ABAP

Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VT

here's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
*     -------- create persistent send request ------------------------
       gv_send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document -------------------------------
*     create text to be sent
       wa_line = text-001.
       APPEND wa_line TO gt_text.
       CLEAR wa_line.
       APPEND wa_line TO gt_text.
       LOOP AT gt_fail ASSIGNING <fs_fail>.
         MOVE <fs_fail>-retry_count TO gv_count.
         CONCATENATE text-002
                     <fs_fail>-setting_id
                     text-003
                     gv_count
                     INTO wa_line SEPARATED BY space.
         APPEND wa_line TO gt_text.
         CLEAR wa_line.
       ENDLOOP.
       APPEND wa_line TO gt_text.
       wa_line = text-007.
       APPEND wa_line TO gt_text.
*     create actual document
       gv_document = cl_document_bcs=>create_document(
                       i_type    = 'RAW'
                       i_text    = gt_text
                       i_length = '12'
                       i_subject = 'Failed Precalculation Settings!' ).
*     add document to send request
       CALL METHOD gv_send_request->set_document( gv_document ).
*     --------- set sender -------------------------------------------
       gv_sender = cl_sapuser_bcs=>create( sy-uname ).
       CALL METHOD gv_send_request->set_sender
         EXPORTING
           i_sender = gv_sender.
*     --------- add recipient (e-mail address) -----------------------
       LOOP AT s_email INTO wa_email.
         MOVE wa_email-low TO gv_email.
         gv_recipient = cl_cam_address_bcs=>create_internet_address(
                                           gv_email ).
         CALL METHOD gv_send_request->add_recipient
           EXPORTING
             i_recipient = gv_recipient
             i_express   = 'X'.
       ENDLOOP.
*     ---------- set to send immediately -----------------------------
       CALL METHOD gv_send_request->set_send_immediately( 'X' ).
*     ---------- send document ---------------------------------------
       CALL METHOD gv_send_request->send(
         EXPORTING
           i_with_error_screen = 'X'
         RECEIVING
           result              = gv_sent_to_all ).
       IF gv_sent_to_all = 'X'.
         WRITE text-004.
       ENDIF.
       COMMIT WORK.
*   exception handling
     CATCH cx_bcs INTO gv_bcs_exception.
       WRITE: text-005.
       WRITE: text-006, gv_bcs_exception->error_type.
       EXIT.
   ENDTRY.
with the following declarations
* TABLES                                                               *
TABLES:
   adr6,
   rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS                                         *
DATA:
   gt_fail          TYPE SORTED TABLE OF rsr_prec_sett
                         WITH UNIQUE KEY setting_id run_date,
   gt_text          TYPE bcsy_text,
   wa_fail          LIKE LINE OF gt_fail,
   wa_line(90)      TYPE c.
FIELD-SYMBOLS:
   <fs_fail>        LIKE LINE OF gt_fail.
* VARIABLES                                                            *
DATA:
   gv_count(4)      TYPE n,
   gv_send_request TYPE REF TO cl_bcs,
   gv_document      TYPE REF TO cl_document_bcs,
   gv_sender        TYPE REF TO cl_sapuser_bcs,
   gv_recipient     TYPE REF TO if_recipient_bcs,
   gv_email         TYPE adr6-smtp_addr,
   gv_bcs_exception TYPE REF TO cx_bcs,
   gv_sent_to_all   TYPE os_boolean.
* SELECTION-SCREEN                                                     *
SELECT-OPTIONS:
   s_email          FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
   wa_email         LIKE LINE OF s_email.

How to Pass internal table from a program to Samrt form

Hi Pals
I want to pass an internal table which I have declared in the program to Smartform..can you please help
me asap.
Regards
Praveen

Hai.
check link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
check this.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Insert Images in smartforms
regards.
sowjanya.b.

How to covvert internal table data to XML file?

Hi,
Do u have material on ABAP with XML?
and how to convert internal table to XML?
Thanks and Regards,
Arpita

Check below links:
XML DOM Processing in ABAP part II - Convert an XML file into an ABAP table using SAP DOM Approach.
Re: include a structure in a TYPES declaration
Thanks and Regards,

How to convert Internal Table to Cluster Table ?

How to convert Internal Table to Cluster Table ?

Use :
EXPORT itab TO DATABASE dbtab(ar) ID key.
<i>EXPORT obj1 ... objn TO DATABASE dbtab(ar) ID key.
Additions:
1. ... = f (for each field you want to export)
2. ... FROM f (for each field you want to export)
3. ... CLIENT g before ID key )
4. ... USING form
5. ... FROM wa (as last addition or after dbtab(ar))
In an ABAP Objects context, a more severe syntax check is performed that in other ABAP areas. See Implicit field names not allowed with clusters and Table work areas not allowed.
Effect
Stores a data cluster in database table dbtab. The specified objects obj1 ... objn (fields, structures, or tables) are stored as a single cluster in the database table dbtab.
The specified database table dbtab must have a standard structure.
The database table dbtab is divided into various logically-related sections (ar, two-character name).
You can export a collection of data objects (a data cluster) to a part of the database using a key (field key).
You can import individual data objects from this collection using the IMPORT statement.
Notes
In classes, you must always assign explicit names to the data objects you want to export, that is, you must use either addition 1 or addition 2.
In classes, you must always specify the work area explicitly, that is, addition 5 is obligatory.
The table dbtab that appears after DATABAE must be declared under TABLES (except in addition 5).
You cannot export the header lines of internal tables. If you specify the name of an internal table with header line, the system always exports the body of the table.
You cannot export data, object, or interface references.
The data is stored in the database, and is consequently not actually stored until a database commit occurs (see LUW). Until this point, you can undo all of your changes using a database rollback (see Programming Transactions).
Example
Exporting two fields and an internal table to the database table INDX:
TABLES INDX.
TYPES: BEGIN OF ITAB3_TYPE,
          CONT(4),
       END OF ITAB3_TYPE.
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
      F1(4), F2 TYPE P,
      ITAB3 TYPE STANDARD TABLE OF ITAB3_TYPE WITH NON-UNIQUE
                 DEFAULT KEY INITIAL SIZE 2,
      WA_INDX TYPE INDX.
Fill the data fields before CLUSTR
before the actual export
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
Export der Daten.
EXPORT F1    FROM F1
       F2    FROM F2
       ITAB3 FROM ITAB3
       TO DATABASE INDX(ST) FROM WA_INDX ID INDXKEY.
</i>
Regards

How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

How to declare internal table in BADI with variable name beginning with 0..

Similar Messages

Maybe you are looking for