Variable not touching the CMOD

Hi,
I defined a variable in the query and included the code in CMOD, But when i execute the query, the query is not touching the CMOD code and the variable is not getting populated.
Please let me know what could be the reason and what should be done to execute the code in CMOD.
Thanks
GK

Rishi,
Y dont try to Debug the Query in RSRT by giving ur query tech, name as selection . And one more thing put a break-point in the CMOD after activating exit where u wrote the code.
Check wether the varaible processing type is Customer exit or not. And Is the code is calling that Varaible.
Hope it helps
bhaskar

Similar Messages

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

Safari 6.0 page zooms in (even if I'm not touching the mouse) how do I zoom back out?

Safari 6.0 page zooms in (even if I'm not touching the mouse) how do I zoom back out?

I turned off zoom in sys pref so hopefully that will help… but when it zooms in huge "on its own" you have to use the back button to go back to normal size as the double tap doesn't work but half the time the back button is greyed out so you have to close the window and start all over which is a pain in the … so why is my back button doing this. It will do this on a page that I used the backbutton on previously?

I can not touch the screen

I can not touch the screen

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Div does not touch the bottom of the browser?

Hey guys
Please have a look at this website thats i busy working on www.flyingantserver.co.za . The problem im having with it is that the div is not touching the bottom of the browser. Im not sure why, but i think the problem might be in my css, Please could someone help me spot the problem thanks.
Yours
Ashveer

Hi Mahendra
I just had a look at it on an older PC with IE6 and its all off. Now I know most of the methods I have used are modern but how can I satisfy both versions of IE by achieving the same result.
Yours
Ashveer

Using shared variable not in the project.

hi all
I have a project with the 2 RT targets and the development PC which were i currently deploy all my shared variables, But I need to finally deploy these shared variable in a different stand alone windows based machine. To do this I created separate application which does nothing but deploys the shared variables in this PC. but when i tried to bind to this variables (frount panel binding) from my RT targets it woudnt work, the led does not glow, it is always transperent. but when I tried to connect to these variables from my development PC it works fine. I double checked the firewall problem, that is not the case here. Can anyone tell me what am i doing wrong?
Thanx
Arun

Hi Prashanth
Thanks for the reply. I did realize that the front panle connection would not be supported in RT, now i have the shared variables on my RT machine which has te source as the windows machine. If the windows machine is my development machine the shared variables connect fine, but if its a different PC the shared variables connect for few seconds and with the error info "shared variable value 0" then the connection gets disconnected.
Also i read a note in the shared variables help, it said to subscribe and publish on a network shared variable all the shared variable which connects to this variable should be active. does this mean that if there are 2 RT targets that subscribe data and one of them is not switched on the shared variable does not work.?
Thanks again for your support.
Regards
Arun

If I do not touch the curser for a time, bubbles appear on the screen. How Can I stop this?

If i watch a movie using firefox, after a few minutes bubbles start appearing on the screen. I have to move the curser to eliminate them. Is there a way to stopping this from happening?

AndrewG33 wrote:
I am new to iMac and thinking about subscribing to itunes match. Is it worthwhile and if I want to still store music on the iMac in iTunes am I able to still do this even if I do not renew the subscription in a years time. Thank you for your help.
See this page from the Apple web site for more information: http://www.apple.com/itunes/itunes-match/
AndrewG33 wrote:
Oh and also, I have set up 4 user log ins one for each member of the family will the same itunes library be used by each person in their own log in or will they have to have their own match subscriptions?
A computer can be associated to only one Apple ID at a time. Multiple Users on the same computer cannot use iTunes Match, automatic downloads, or re-download content from the iTunes Store at the same time: http://support.apple.com/kb/HT4627.

Since I updated Every time I talk on the phone it goes mute or another button is pushed and my face is not touching the screen?

My face is not hitting the front but the phone goes to mute or some else and some times goes white screen then goes back to normal?

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On...

Using a variable not in the Export,Import, table Parameters in USER EXIT

Hi all,
During the Invoice Creation, I need to add an entry in the VBFS table, so that it will be displayed in the system log. In the FM 'RV_INVOICE_CREATE', the structure corresponding to it is XVBFS. There is a user-exit CALL CUSTOMER-FUNCTION '002', in this FM 'RV_INVOICE_CREATE'. But the import, export or Table Parameters does not have XVBFS.
How can I use XVBFS inside the User exit?..
Please help.
Regards,
Asha

Hi,
I dont know whether this will help u...
write this in user exit...to access variables/tables of main program..
FIELD-SYMBOLS: <komv>.
ASSIGN ('(SAPLMEPO)TKOMV[]') TO <komv>.
where.. SAPLMEPO is the main program...and TKOMV[] is a internal table in SAPLMEPO.
regards
Sukriti....

I have the first version iPhone. Recently, I tried to edit several old notes. I open the note, touch the trash can, touch "delete note", and it goes back to my applications screen; I go back into Notes, and the note supposedly deleted is still there.

I have a first version iPhone. Having problem with Notes. There are four notes that I want to delete and have tried everything I can think of; they won'y move to trash; I delete the text to a blank page but when I go backa to notes the title is still there and it opens with the undeleted test etc, etc. And it won't save new notes. What can I do other than get a newer iPhone? Notes on my iPad works just fine.
Pat

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Variable not getting the filename

Hello Experts
I am new to ODI.
when i am using variable for filename its not working.
Please suggest.
Thank you

Hi
after giving the filename just hit ENTER in your key board.(I think after pesting the filename you are directly clicking ok)
Then click OK.
It will work.
Thanks

Variable not transfer the value to planning function

Hi,
I am facing a problem while executing the planning sequence.
In my workbook I have a button, behind that button one planning sequence is attached ( it copy the quantity from one scenario to other scenario) along with two varaible. Value for variable is pass behind the button.
Both variable are multiple single value type.
CMD                                                1         EXECUTE_PLANNING_SEQUENCE (copy)
PLANNING_SEQUENCE_NAME        1        YNDPP59_A_SQ046
VAR_NAME_1                                1        YQUXN_YN_SCENAR_007(from scenario)
VAR_VALUE_EXT_1                        1         F25
VAR_NAME_2                                1        YQUXO_YN_SCENAR_001(to scenario)
VAR_VALUE_EXT_2                        1         F50
Now, I have other buttons in my workbook. They used to copy from one scenario to other but variable for scenario use is same for all.
Example Scenario :-
Button 1:- copy demand to photo demand
Button 2:- copy confirmed demand to demand
Before Image
Basin   Subfamily Quarter    KF1(Demand)   KF2(Photo Demand) KF3(Confirmend Demand)
100           70        20083         100 To                 0 To                       200 To
First time:
When I used button 1(copy demand to photo demand) it's works fine.
Basin   Subfamily Quarter    KF1(Demand)   KF2(Photo Demand) KF3(Confirmend Demand)
100           70        20083         100 To                 100 To                       200 To
I do the manual changes in Key figure(demand)
Basin   Subfamily Quarter    KF1(Demand)   KF2(Photo Demand) KF3(Confirmend Demand)
100           70        20083         150 To                 100 To                       200 To
then use button2 (copy confirmed demand to demand) it works fine
Basin   Subfamily Quarter    KF1(Demand)   KF2(Photo Demand) KF3(Confirmend Demand)
100           70        20083         200 To                 100 To                       200 To
Second time:
When I used button 1(copy demand to photo demand) it's works fine.
Basin   Subfamily Quarter    KF1(Demand)   KF2(Photo Demand) KF3(Confirmend Demand)
100           70        20083         200 To                 200 To                       200 To
I do the manual changes in Key figure(demand)
Basin   Subfamily Quarter    KF1(Demand)   KF2(Photo Demand) KF3(Confirmend Demand)
100           70        20083         150 To                 200 To                       200 To
then use button2 (copy confirmed demand to demand )it didn't work fine
Basin   Subfamily Quarter    KF1(Demand)   KF2(Photo Demand) KF3(Confirmend Demand)
100           70        20083         150 To                 150 To                       200 To
it executed the planning sequence running behind button 1
So, problem is my variable keep the last values. Please, help me to solve this problem.
Thanks and regards,
Deepak Singh

Hi,
Your post is little bit confusing ;
What i understood is that your planning function is not running with proper value of variables ;
Two things can be the reasons :
1. the data set that you are running for second time may be improper which can be when the data is not saved in cube
2. The variable value is wrong ; please check in debug what value of variable it is taking; if for the first time the value of variable is proper than there shouldn't be any error for second time;
Post your questions in little simpler way that will be easy to understand;
Thanks
Pratyush

Message: cannot import xml, even after exporting using file, export, xml, and not touching the file

I need to change the messages for a different language. Has anyone been able to set this XML file to import? Some of the content is in Norwegian, but don't how that will affect it. But it will not import a file, even if it was just exported.

Hi Patrick,
I tried few import/export scenarios in captivate 7 and it works fine for me. I think it will be a good idea if you can mail me the .xml file along with steps to reproduce the issue.
My email id is [email protected]
-Tamish

No matter what OS im currently on, if I restart my computer and do not touch the Alt key, it will reboot in windows every time. How do I make it so it will reboot in Mac automatically?

So last night, I downloaded all my software updates and hit 'restart'. then I went to bed, thinking my updates would install themselves automatically. I woke up this morning only to find that my computer had restarted in Windows 7. How can i make it so that without holding down alt, my computer will restart in Mac, even if my starting point is in Windows?
--Also side note, why does my clock on my Mac OS keep getting messed up whenever I restart??
-Thanks a bunch!

PurpleLego wrote:
Doing this does give me an oportunity to chose which OS i will restart in. But I guess what I'm asking is, how can I make it so that Mac is my default OS that i will reboot in.
i.g. Im on Mac OS and i tap my power button, and select restart. When it's rebooting, and without holding down alt, I want my computer to reboot in Mac. As of now, if I do that, it will reboot in Windows.
Whichever you choose becomes the default!

RegisterPointerInputTarget() breaks InjectTouchInput() on Windows 8.1 when the user physically touches the screen.

This is a "working on Windows 8.0 but broken on 8.1" problem.
My application is a full screen magnifier. When magnification is turned on, there is no longer a 1:1 relationship between touch screen coordinates and desktop coordinates.
So I need a way to allow the user operate the computer, such as dragging or pinching something on the desktop (icon/window/whatever). So when they drag their finger(s) across the touch screen, I need to capture that, translate the touch coordinates from magnified
pixels coordinates into original desktop pixels and then inject new input to the app. I also want the ability to capture the touch input and not pass it to the app (so I can have gestures/whatever to control the magnifier viewport location). I might also want
to inject input when the user is not touching the real screen.
So I am capturing all touch input RegisterPointerInputTarget() and simulating touch input using InjectTouchInput() (after translating coordinates from the screen to the magnified desktop).
My code for simulating touch input works fine in isolation (as does the SDK sample). My code for capturing all touch input also works fine. However, if they are both used at the same time it’s not happy, although I am not getting any error codes back from the
API.
Specifically, attempts to simulate a touch and hold or a touch and drag are not working whenever the user is physically touching the real touch screen. Further diagnosis indicates that the touch input messages are not arriving in the target application. The
moment the user physcially touches the screen, any simulated input in progress gets cancelled and all subsequent calls to InjecttouchInput() are ignored - but no error code is returned.
Because I am capturing all real input using RegisterPointerInputTarget(), I would expect all real physical input to be redirected to my window (which it does) and be able to call InjectTouchInput() at any point to simulate input. The simulated input would go
to the target app and not be captured by my own process.
This all worked fine in Windows 8.0 but is broken in windows 8.1.
I have written a basic test application that does two things.
1. Uses RegisterPointerInputTarget() to consume all touch input.
2. Uses InjectTouchInput() to simulate some output. In this case, it just does a click, followed by a down, a drag and an up – which handily draws a line in the paint application if you arrange your windows carefully.
If I run this, it works until you physically touch the screen with your finger. The moment you do this, InjectTouchInput stops working (no error code), but the paint app receives a mouse up and the line stops. The hwnd to capture all touch input does receive
WM_POINTER... messages and I an returning 0 from this function (have tried other return codes, nothing makes any difference).
So it looks like that if you use RegisterPointerInputTarget(), any physical input is captured, but it also breaks any simulated touch gestures that are currently in progress.
Source code is below, which you can drop in as a replacement for the main .cpp file in your injecttouch sample code from the win8 sdk (and set uiaccess=true and code sign it!). It does it in two threads, however this doesn’t seem to matter, it does the same
thing with one thread. Am I doing something wrong? (and yes, I know that calling Sleep() is not wise - my real app doesn't do this)?
- Mike.
// allow use of Windows 8 headers
#undef WINVER
#define WINVER 0x0602
#include "stdafx.h"
#include <debugoutx.h>
#include <process.h>
* WinMain *
* Application entrypoint *
static HWND touch_hwnd = NULL;
static ATOM touch_window_atom = NULL;
LRESULT CALLBACK TouchThread_WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
switch (message)
case WM_CLOSE:
DestroyWindow(hWnd);
touch_hwnd = NULL;
break;
case WM_NCPOINTERUPDATE :
case WM_NCPOINTERDOWN :
case WM_NCPOINTERUP :
case WM_POINTERENTER :
case WM_POINTERLEAVE :
case WM_POINTERACTIVATE :
case WM_POINTERCAPTURECHANGED :
case WM_TOUCHHITTESTING :
case WM_POINTERWHEEL :
case WM_POINTERHWHEEL :
// case DM_POINTERHITTEST :
case 0x250:
case WM_POINTERUPDATE :
case WM_POINTERDOWN :
case WM_POINTERUP :
// consume pointer mesages
dprintf(L"msg %x\n",message);
return 0;
break;
case WM_TIMER:
break;
default:
dprintf(L"msg %x\n",message);
return DefWindowProc(hWnd, message, wParam, lParam);
break;
return 0;
void Inject(POINTER_TOUCH_INFO &contact)
Sleep(1);
while(1)
DWORD bRet = InjectTouchInput(1, &contact);
if (bRet==0)
DWORD temp = GetLastError();
if (temp==ERROR_NOT_READY)
Sleep(1);
continue;
else
DebugBreak();
break;
static int start = 400;
static int end = 800;
bool SimulateInput(POINTER_TOUCH_INFO &contact)
static int x = start;
if (x==start)
contact.pointerInfo.ptPixelLocation.x = x;
// inject a touch down
contact.pointerInfo.pointerFlags = POINTER_FLAG_DOWN | POINTER_FLAG_INRANGE | POINTER_FLAG_INCONTACT;
Inject(contact);
else if (x==(start+1))
Sleep(10);
contact.pointerInfo.pointerFlags = POINTER_FLAG_UP ;
Inject(contact);
else if (x==(start+2))
contact.pointerInfo.pointerFlags = POINTER_FLAG_DOWN | POINTER_FLAG_INRANGE | POINTER_FLAG_INCONTACT;
Inject(contact);
else if (x==end)
contact.pointerInfo.pointerFlags = POINTER_FLAG_UP ;
Inject(contact);
PostMessage(touch_hwnd,WM_QUIT,0,0);
return false;
else if (x<end)
// drag
contact.pointerInfo.ptPixelLocation.x = x;
// contact.rcContact.left = x - 4;
// contact.rcContact.right = x + 4;
contact.pointerInfo.pointerFlags = POINTER_FLAG_UPDATE | POINTER_FLAG_INRANGE | POINTER_FLAG_INCONTACT;;
Inject(contact);
x++;
return true;
void thread2(void *)
// create window to capture global touch input.
if (!touch_window_atom)
WNDCLASS wc;
wc.style = 0; // Class style(s).
wc.lpfnWndProc = TouchThread_WndProc; // Function to retrieve messages
wc.cbClsExtra = 0; // No per-class extra data.
wc.cbWndExtra = 0; // No per-window extra data.
wc.hInstance = GetModuleHandle(0); // Application that owns the class.
wc.hIcon = NULL;
wc.hCursor = NULL;
wc.hbrBackground = (HBRUSH)GetStockObject(WHITE_BRUSH);
wc.lpszMenuName = NULL; // Name of menu resource in .RC file.
wc.lpszClassName = L"MarsTouchInputCapture"; // Name used in call to CreateWindow.
// Register the window class and return success/failure code.
touch_window_atom = RegisterClass(&wc);
touch_hwnd = CreateWindowEx(WS_EX_NOACTIVATE,L"MarsTouchInputCapture",L"Magnification",0,0,0,1,1,NULL,NULL,GetModuleHandle(0),NULL);
// capture global desktop touch input
if (RegisterPointerInputTarget(touch_hwnd,PT_TOUCH)==0)
DWORD err = GetLastError();
MessageBox(NULL,L"RegisterPointerInputTarget(PT_TOUCH) failed",L"error",MB_OK);
if (RegisterPointerInputTarget(touch_hwnd,PT_PEN)==0)
DWORD err = GetLastError();
MessageBox(NULL,L"RegisterPointerInputTarget(PT_PEN) failed",L"error",MB_OK);
// message loop
MSG msg;
while (GetMessage(&msg, NULL, 0, 0))
DispatchMessage(&msg);
UnregisterPointerInputTarget(touch_hwnd,PT_TOUCH);
UnregisterPointerInputTarget(touch_hwnd,PT_PEN);
int
WINAPI WinMain(
_In_ HINSTANCE hInstance,
_In_opt_ HINSTANCE hPrevInstance,
_In_ LPSTR lpCmdLine,
_In_ int nShowCmd)
POINTER_TOUCH_INFO contact;
BOOL bRet = TRUE;
MessageBox(NULL,L"Break on Load",L"Attach Debugger",MB_OK);
// assume a maximum of 10 contacts and turn touch feedback off
InitializeTouchInjection(10, TOUCH_FEEDBACK_NONE);
// initialize the touch info structure
memset(&contact, 0, sizeof(POINTER_TOUCH_INFO));
contact.pointerInfo.pointerType = PT_TOUCH; //we're sending touch input
contact.pointerInfo.pointerId = 7; //contact 0
contact.pointerInfo.ptPixelLocation.x = 400;
contact.pointerInfo.ptPixelLocation.y = 480;
contact.touchFlags = TOUCH_FLAG_NONE;
contact.touchMask = TOUCH_MASK_ORIENTATION | TOUCH_MASK_PRESSURE;
contact.touchMask = 0;
contact.orientation = 90;
contact.pressure = 32000;
// create thread/window for global capture
_beginthread(thread2,0,NULL);
while(SimulateInput(contact))
Sleep(1);
return 0;

I have almost same situation. But there are some different. I am using RegisterPointerInputTarget to redirect all touch message to my window. and use InjectTouchInput to simulate each flag, which means, WM_POINTERDOWN,WM_POINTERUPDATE,WM_POINTERUP. If user
touches monitor, I simulate DOWN, if user swipes their finger, I simulate UPDATE, if user lifts finger, I simulate UP.
Then the interesting point is, system consider user's finger as primary pointer, and my injected touch as secondary pointer. windows desktop and windows explorer skip all my injected touch. I really hate that.
However IE and chrome will accept my injected touch, they don't caret about primary pointer.
In order to fix this problem, I call AccNotifyTouchInteraction before calling InjectTouchInput.
According to the MSDN, AccNotifyTouchInteraction will notify the destination window before InjectTouchInput. But this idea still fails, which is disappointing.

Variable not touching the CMOD

Similar Messages

Maybe you are looking for