Variable Personalization for Web Templates
Hi,
Does anyone know of a method to personalize variable values for <b>individual</b> web templates. When I personalize a variable value while running the query on web, its value gets modified for all queries, not just the specific one that I am running.
This does not happen when I run the queries in BEx. Here I have the option of personalizing the variable values specific to the query that I am running (by using the icon at the bottom of the variable screen), or to personalize the variable value across all queries (by using the icon displayed with the individual variable).
Can anyone help me in achieving the same two options for queries run on web? I want to personalize variable values for individual queries.
Thanks
-Arif
Hi Arun
Thanks for your input, but the bookmarks or parameter passing will not give enough flexibility to the users.
For example:
Out of 10 available variables in the query, the user should have an option of selecting values for those that have not been personalized (say 7 variables) while the rest 3 get populated automatically because they have been personalized. In EACH run of the query, the user will have the flexibility to select a different value for the 7 variables.
This needs to be different for each query the user runs, even though the queries may use same variables as the other.
I am trying out some options. If it works, I shall let you know.
Regards
-Arif
Similar Messages
-
Variable selction in Web Template
Hi All,
I have one web template in that there are three queries but when I insert one more query
The variable screen showing duplicate values. All setting related to variable display in web template is correct. Can any one give me solution how to avoid these duplicate variable values after executing the report?
Your response would be appertained
Thanks in Advance.
NitinHi Nikhil,
Try to use only one variable for all the queries.
And also please check in the queries for the characteristics (which you said of Duplicate values):
in the query properties in the advanced tab-->"Filter Value Selection During Query Execution"
the options you have mentioned for this? and also Is the option same in all queries for that characteristic.
Please check and let me know.
Regards,
Ravi Kanth -
ABAP Interface for Web Template Design
Hi BW Gurus,
I have report published in the portal through BSP. Please some advise me what are the ABAP class files so that I can design my portal reports.
I am sure there are few class files where I can design the portal reports. Let me know your important help....
Thanks
Ganesh Reddy.Ganesh,
CL_RSR_WWW_MODIFY_TABLE is used to customize the web templates in BW3.x.
the way I understand the data flow to web templates work is :
Query(s) --> Web Template class --> HTML --> <CL_RSR_WWW_MODIFY_TABLE - this class is optional >
This works only for Web templates though - as for classes that are used in web templates - create a web template and then assign the same to a request - you will find the classes available under that request under PHIO or something like that. -
Web Template URL for Web Template ZTEST could not be Generated
Hello Experts,
I have designed a Template in WAD with the name ZTEST(example) when i am trying to execute it in Browser, it is throwing an error like "Web Template URL for Web Template ZTEST could not generated". I am working on 7.0 WAD
Please suggest me if there is any settings to done.
Thanks in Advance,
Regards,
Vishnu.Hello Mr. Wond,
Even if i am Executing using a default Template it is throwing the same error that " Web Template URL could not be generated". Meanwhile when i am working on this issue i found that some Command URLs should be defined, but i am unable to trace where to define this URL Command like <a href=u201Dhttp://myAppServer:myPort/SAP/BW/BEx?pageno=1&request_no=8&cmd=ldoc&template_id=EXAMPLE_TEMPLATEu201C></a>
Please suggest..................
Regards,
Vishnu. -
Variable in adhoc web template
Dear Experts,
In my adhoc web template, I included a dummy query which has a text variable.
Upon executing the web template this variable is prompted correctly in selection screen.
But, when I execute a query from query designer (the query will be automatically embedded to this adhoc web template when publish to web),
only variable from the query is prompted,
and NOT the text variable which I have in adhoc web template.
Is there any way to have this text variable from adhoc web template even when I execute query from query designer?
Thanks,
Sari.Yes thanks.
I have put the variable in the query designer and it works fine.
Cheers,
Sari. -
How to disply the value of variable in the Web template
Imagine I have a query TOP-N customers. I want to diplay N value in the web template. I used web item for this purpose in NW2004. Which item should I use for the same purpose in NW2004s?
ThanksDoes anyone have another suggestion? The information field does not render pretty. I am trying to do this via an HTML path edit and a text box. The view source looks like this for a variable
<BICS_VIEW>
<VARIABLES>
<VARIABLE name="RDSHW_PCY_YOVERY" type="DOUBLE" text="% Goal Year over Year" value="10.0"/>
</VARIABLES>
I tried various versions of the path=... but cannot get it to work. Anyone got an idea ???
I tried
path="DATA_PROVIDER:DP_1?/BICS_VIEW/VARIABLES/VARIABLE/@value" /> -
Displaying variable values in Web Template
Hi,
I am working on a Web Template.
I want to display the variables and their values input by the user on the Web Template.
Which Web Item function shd I use?
How shd I use it?
Pls guide me.
Thank you,
AdarshHi Adarsha.
You can add the standard web item called "Text Elements". When you have added it just insert the dataprovider you want the filter values displayed for.
Hope it helps.
BR
Stefan -
Default variable values in Web Template
http://-----xx.com:8120/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=QZSC_O01_5001_TEST&var_name_1=0S_PLANT&var_value_ext_1=6011&VARIABLE_SCREEN=X
While using the above variable my expectation is it shall display variable screen and for plant (0s_plant) variable it shall show default value as 6011 while other variable shall remain blank.
But while executing it is not showing plant default value in variable screen. Any suggestions.
Many Thanks
VikashHi Vikas,
While defining the Query, you can define the default value for the variable. And this Query can be assigned to the Analysis Item in the Web Template. If the "Display Variable" option is set to "On", then, whenever the Template is executed, the default value set in the Variable will be visible.
Hope this answers your question.
regards,
prem. -
Force Variable screen with Web Templates
We are on SP7 and have made the necessary settings based on note 950463, however the variable screen only pops up the first time you click the "New Analysis" button. If you click the button again, and select a query with optional variables, the variable screen does not show up. I've tried setting the default parameters in the IMG and in the portal iview to always pass the parameter VARIABLE_SCREEN=X along with making the necessary modifications to our default web template, but none of this has worked. Has anyone else come accross this?
Message was edited by: Ravi PatelHey,
Below is a version of the web analyzer I created with the following changes:
1. Variable screen will always open on subsequent calls to the "New Analysis" button, even for optional variables.
2. A button for refresh. This button basically calls the variable screen. If no variables exist, then this will just refresh, but if variables do exist, this launches the variable screen and then refreshes, similar to the refresh used within the 3.x Bex Analyzer...
3. A button for "Back to Start" which takes you to the inital state of the web application.
4. A button for "Back" which will take you back one navigation state. Hope this code helps!
Cheers,
Prakash
<bi:bisp xmlns:bi="http://xml.sap.com/2005/01/bi/wad/bisp" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns="http://www.w3.org/TR/REC-html40" xmlns:h="http://www.w3.org/TR/REC-html40">
<html>
<head>
<title>BI Web Application</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</meta>
</head>
<body>
<bi:data_provider name="DP_1" type="QUERY_VIEW_DATA_PROVIDER">
<bi:param name="INITIAL_STATE" type="CHOICE" value="QUERY">
<bi:param name="QUERY" value="">
</bi:param>
</bi:param>
</bi:data_provider>
<bi:item name="CONTEXT_MENU_ITEM_1" designheight="60" designwidth="80" type="CONTEXT_MENU_ITEM" xmlns:B="http://xml.sap.com/2005/01/bi/wad/bisp">
<bi:param name="MENU_DATAPROVIDER_PROPERTIES" value="">
</bi:param>
<bi:param name="MENU_PRINT" value="">
</bi:param>
<bi:param name="MENU_ITEM_PROPERTIES" value="">
</bi:param>
<bi:param name="MENU_EXCEPTIONS" value="">
</bi:param>
<bi:param name="MENU_CONDITIONS" value="">
</bi:param>
<bi:param name="MENU_VIEW_SAVE" value="X">
</bi:param>
</bi:item>
<bi:item name="TEMPLATE_PARAMETERS" type="TEMPLATE_PARAMETERS">
<bi:param name="CLEAR_VARIABLES" value="X">
</bi:param>
</bi:item>
<bi:item name="MESSAGES_LIST_ITEM_1" designheight="150" designwidth="400" type="MESSAGES_LIST_ITEM" xmlns:B="http://xml.sap.com/2005/01/bi/wad/bisp">
</bi:item>
<bi:item type="GROUP_ITEM" name="GROUP_ITEM_1" designheight="130" designwidth="800" xmlns:B="http://xml.sap.com/2005/01/bi/wad/bisp">
<bi:param name="CHILD_ITEM_REF" value="CONTENT_AREA">
</bi:param>
<bi:param name="WIDTH" value="800">
</bi:param>
<bi:param name="HEIGHT" value="130">
</bi:param>
<bi:param name="PADDING" value="">
</bi:param>
<bi:param name="GROUP_DESIGN" value="SAPCOLOR">
</bi:param>
<bi:param name="WITH_CAPTION" type="CHOICE" value="X" text="">
<bi:param name="CAPTION_TYPE" type="CHOICE" value="CHILD_ITEM_REF">
<bi:param name="CHILD_ITEM_REF" value="CONTAINER_TITLE">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="WITH_TOOLBAR" type="CHOICE" value="X" text="">
<bi:param name="CHILD_ITEM_REF" value="TOOLBAR_ALIGNMENT">
</bi:param>
</bi:param>
<bi:item type="CONTAINER_ITEM" name="CONTAINER_TITLE" designwidth="600" designheight="97">
<bi:param name="WIDTH" value="600">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<table cellspacing="0" border="0">
<tbody>
<tr>
<td style="WIDTH: 90%">
<bi:item name="QUERY_TITLE" designheight="48" designwidth="400" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="GENERIC_TEXT_BINDING">
<bi:param name="GENERIC_TEXT_BINDING" type="COMPOSITE">
<bi:param name="DATA_PROVIDER_REF" value="DP_1" text="DP_1">
</bi:param>
<bi:param name="GENERIC_TEXT_ELEMENT" value="QUERY_DESCRIPTION">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="TEXT_COLOR" value="DEFAULT">
</bi:param>
<bi:param name="TEXT_DESIGN" value="EMPHASIZED">
</bi:param>
</bi:item>
</td>
<td nowrap="nowrap">
<bi:item name="ACTUAL_DATE_TEXT" designheight="64" designwidth="311" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="TEXT_CONTENT">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="705">
</bi:text>
</bi:param>
</bi:param>
</bi:item>
</td>
<td nowrap="nowrap">
<bi:item name="ACTUAL_DATE" designheight="85" designwidth="400" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="GENERIC_TEXT_BINDING">
<bi:param name="GENERIC_TEXT_BINDING" type="COMPOSITE">
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="GENERIC_TEXT_ELEMENT" value="ROLLUPTIME">
</bi:param>
</bi:param>
</bi:param>
</bi:item>
</td>
</tr>
</tbody>
</table>
</bi:item>
<bi:item type="CONTAINER_ITEM" name="TOOLBAR_ALIGNMENT" designheight="300" designwidth="600">
<table cellspacing="0" border="0">
<tbody>
<tr>
<td>
<bi:item type="CONTAINER_LAYOUT_ITEM" name="CONTAINER_LAYOUT_TOOLBAR" designheight="130" designwidth="652">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:param name="ROW_LIST" type="ORDEREDLIST">
<bi:param name="ROW" type="ORDEREDLIST" index="1">
<bi:param name="COLUMN" type="COMPOSITE" index="1">
<bi:param name="CHILD_ITEM_REF" value="BUTTON_OPEN_SAVE">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="2">
<bi:param name="CHILD_ITEM_REF" value="QUERYVIEW_SELECTION">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="3">
<bi:param name="CHILD_ITEM_REF" value="TEXT_DISPLAY_AS">
</bi:param>
<bi:param name="VALIGN" value="CENTER">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="4">
<bi:param name="CHILD_ITEM_REF" value="DROPDOWN_DISPLAY">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="5">
<bi:param name="CHILD_ITEM_REF" value="BUTTON_TOOLBAR_2">
</bi:param>
</bi:param>
</bi:param>
</bi:param>
<bi:item name="QUERYVIEW_SELECTION" designheight="70" designwidth="200" type="DROPDOWN_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
<bi:param name="DATA_BINDING_TYPE" type="CHOICE" value="QUERY_VIEW_SELECTION">
<bi:param name="QUERY_VIEW_SELECTION" type="COMPOSITE">
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="SPECIFIC_LIST_OF_QUERY_VIEWS" type="CHOICE" value="">
</bi:param>
</bi:param>
</bi:param>
</bi:item>
<bi:item name="DROPDOWN_DISPLAY" designheight="130" designwidth="400" type="DROPDOWN_ITEM">
<bi:param name="DATA_BINDING_TYPE" type="CHOICE" value="STATIC_OPTION_LIST">
<bi:param name="STATIC_OPTION_LIST" type="ORDEREDLIST">
<bi:param name="STATIC_OPTION" type="COMPOSITE" index="1">
<bi:param name="SELECTION_TEXT">
<bi:text program="SAPLRRSV" key="622">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="ANALYSIS_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="ANALYSIS">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="CHART_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="CHART">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="STATIC_OPTION" type="COMPOSITE" index="2">
<bi:param name="SELECTION_TEXT">
<bi:text program="SAPLRRSV" key="626">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="ANALYSIS_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="ANALYSIS">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="CHART_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="CHART">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="STATIC_OPTION" type="COMPOSITE" index="3">
<bi:param name="SELECTION_TEXT">
<bi:text program="SAPLRRSV" key="750">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="ANALYSIS_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="ANALYSIS">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="CHART_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="CHART">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
</bi:param>
</bi:param>
</bi:item>
<bi:item name="TEXT_DISPLAY_AS" designheight="130" designwidth="400" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="TEXT_CONTENT">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="746">
</bi:text>
</bi:param>
</bi:param>
<bi:param name="TEXT_DESIGN" value="EMPHASIZED">
</bi:param>
<bi:param name="TEXT_WRAPPING" value="">
</bi:param>
</bi:item>
<bi:item name="BUTTON_OPEN_SAVE" designheight="130" designwidth="400" type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST" type="ORDEREDLIST">
<bi:param name="BUTTON" type="COMPOSITE" index="2">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="236">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="759">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="LOAD">
<bi:param name="TARGET_DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="OPEN_SAVE_DIALOG_LAYOUT" value="TEMPLATE_PERSISTENCY">
</bi:param>
<bi:param name="DISPLAY_SINGLE_FILTER_ENTRY" value="">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST">
<bi:param name="BUTTON" index="2">
<bi:param name="ENABLED" path="PAGE?PAGE/VARIABLE_CONTAINER/HAS_INPUT_VARIABLES/@value">
</bi:param>
</bi:param>
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_CLOSE_BUTTON">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
<bi:param name="ENABLED" value="X">
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="4">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="049">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="760">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SAVE_AS">
<bi:param name="TARGET_DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="OPEN_SAVE_DIALOG_LAYOUT" value="TEMPLATE_PERSISTENCY">
</bi:param>
<bi:param name="DISPLAY_SINGLE_FILTER_ENTRY" value="">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
<bi:param name="ENABLED" value="X">
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="1">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="757">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="758">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="LOAD">
<bi:param name="TARGET_DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="OPEN_SAVE_DIALOG_LAYOUT" value="DATAPROVIDER_PERSISTENCY">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST">
<bi:param name="BUTTON" index="2">
<bi:param name="ENABLED" path="PAGE?PAGE/VARIABLE_CONTAINER/HAS_INPUT_VARIABLES/@value">
</bi:param>
</bi:param>
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_CLOSE_BUTTON">
</bi:param>
</bi:command>
<bi:command type="SET_VARIABLES_STATE">
<bi:param name="VARIABLE_SCREEN" value="X">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="5">
<bi:param name="CAPTION" value="Refresh">
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="OPEN_VARIABLE_DIALOG">
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="6">
<bi:param name="CAPTION" value="Back to Start">
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="BACK_TO_INITIAL_STATE">
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="7">
<bi:param name="CAPTION" value="Back">
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="BACK_TO_PREVIOUS_STATE">
</bi:command>
</bi:param>
</bi:param>
</bi:param>
</bi:param>
</bi:item>
<bi:item name="BUTTON_TOOLBAR_2" designheight="130" designwidth="400" type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST" type="ORDEREDLIST">
<bi:param name="BUTTON" type="COMPOSITE" index="1">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="702">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="702">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="OPEN_TEMPLATE_DIALOG">
<bi:param name="TEMPLATE" value="0ANALYSIS_PATTERN_INFO" text="Analysis Pattern: Information">
</bi:param>
<bi:param name="WIDTH" value="800">
</bi:param>
<bi:param name="HEIGHT" value="620">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="2">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="747">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="747">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="LAUNCH_BROADCASTER">
<bi:param name="START_WIZARD" type="CHOICE" value="X" text="">
<bi:param name="DISTRIBUTION_TYPE" value="MAIL">
</bi:param>
</bi:param>
<bi:param name="START_OBJECT_TYPE" value="QUERY_VIEW_DATA_PROVIDER_REF">
<bi:param name="QUERY_VIEW_DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:param>
</bi:command>
</bi:param>
</bi:param>
<bi:param name="ENABLED" value="X">
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="3">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="748">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="748">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="EXPORT">
<bi:param name="TEMPLATE" value="0ANALYSIS_PATTERN_EXPORT" text="Analysis Pattern Export">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="4">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="710">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="710">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="EXPORT">
<bi:param name="EXPORT_FORMAT" value="XLS">
</bi:param>
<bi:param name="ITEM_REF_LIST">
<bi:param name="ITEM_REF" index="1" value="CHART">
</bi:param>
<bi:param name="ITEM_REF" index="2" value="ANALYSIS">
</bi:param>
<bi:param name="ITEM_REF" index="3" value="EXCEPTIONS">
</bi:param>
<bi:param name="ITEM_REF" index="4" value="QUERY_TITLE">
</bi:param>
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="5">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="709">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="OPEN_DIALOG_DLG_DOC_BROWSER">
<bi:param name="TARGET_ITEM_REF" value="ANALYSIS">
</bi:param>
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
<bi:param name="DOCUMENT_CLASS_SPECIFIC" type="CHOICE" value="DATA_CONTEXT">
<bi:param name="DATA_CONTEXT" type="COMPOSITE">
<bi:param name="DATA_ROW" value="-1">
</bi:param>
<bi:param name="DATA_COLUMN" value="-1">
</bi:param>
</bi:param>
</bi:param>
</bi:command>
</bi:param>
</bi:param>
<bi:param name="ENABLED" value="X">
</bi:param>
</bi:param>
</bi:param>
</bi:item>
</bi:item>
</td>
<td style="WIDTH: 80%">
</td>
<td>
<bi:item type="CONTAINER_LAYOUT_ITEM" name="TOOLBAR_RIGHT_AREA" designheight="130" designwidth="652">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:param name="ROW_LIST" type="ORDEREDLIST">
<bi:param name="ROW" type="ORDEREDLIST" index="1">
<bi:param name="COLUMN" type="COMPOSITE" index="1">
<bi:param name="CHILD_ITEM_REF" value="LINK_FILTER">
</bi:param>
</bi:param>
<bi:param name="COLUMN" type="COMPOSITE" index="2">
<bi:param name="CHILD_ITEM_REF" value="LINK_SETTINGS">
</bi:param>
</bi:param>
</bi:param>
</bi:param>
<bi:item name="LINK_FILTER" designheight="130" designwidth="400" type="LINK_ITEM">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="632">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="632">
</bi:text>
</bi:param>
<bi:param name="INTERACTION_ALLOWED" value="X">
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_GROUP_AREA">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="SETTINGS_GROUP_AREA">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST">
<bi:param name="BUTTON" index="2">
<bi:param name="ENABLED" path="PAGE?PAGE/VARIABLE_CONTAINER/HAS_INPUT_VARIABLES/@value">
</bi:param>
</bi:param>
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_CLOSE_BUTTON">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:item>
<bi:item name="LINK_SETTINGS" designheight="130" designwidth="400" type="LINK_ITEM">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="749">
</bi:text>
</bi:param>
<bi:param name="TOOLTIP">
<bi:text program="SAPLRRSV" key="749">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="VISIBLE">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="SETTINGS_GROUP_AREA">
</bi:param>
</bi:command>
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_GROUP_AREA">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:item>
</bi:item>
</td>
</tr>
</tbody>
</table>
</bi:item>
<bi:item type="CONTAINER_ITEM" name="CONTENT_AREA" designheight="220" designwidth="668">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:item type="GROUP_ITEM" name="FILTER_GROUP_AREA" designheight="300" designwidth="600">
<bi:param name="CHILD_ITEM_REF" value="FILTER_AREA">
</bi:param>
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
<bi:param name="WITH_CAPTION" value="">
</bi:param>
<bi:item type="CONTAINER_LAYOUT_ITEM" name="FILTER_AREA" designheight="220" designwidth="668">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:param name="ROW_LIST">
<bi:param name="ROW" index="1">
<bi:param name="COLUMN" index="1">
<bi:param name="CHILD_ITEM_REF" value="FILTER_EXPL">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="ROW" index="2">
<bi:param name="COLUMN" index="1">
<bi:param name="CHILD_ITEM_REF" value="FILTER_PANE">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="ROW" index="3">
<bi:param name="COLUMN" index="1">
<bi:param name="CHILD_ITEM_REF" value="FILTER_CLOSE_BUTTON">
</bi:param>
</bi:param>
</bi:param>
</bi:param>
<bi:item name="FILTER_EXPL" designheight="64" designwidth="311" type="TEXT_ITEM">
<bi:param name="TEXT_BINDING" type="CHOICE" value="TEXT_CONTENT">
<bi:param name="TEXT_CONTENT">
<bi:text program="SAPLRRSV" key="754">
</bi:text>
</bi:param>
</bi:param>
<bi:param name="TEXT_COLOR" value="DIMINISHED">
</bi:param>
</bi:item>
<bi:item name="FILTER_PANE" designheight="50" designwidth="442" type="FILTER_PANE_ITEM">
<bi:param name="COLUMNS" value="3">
</bi:param>
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="HEIGHT" value="50">
</bi:param>
<bi:param name="AUTOMATIC_APPLY" value="">
</bi:param>
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:item>
<bi:item name="FILTER_CLOSE_BUTTON" designheight="20" designwidth="442" type="BUTTON_GROUP_ITEM">
<bi:param name="BUTTON_LIST" type="ORDEREDLIST">
<bi:param name="BUTTON" type="COMPOSITE" index="1">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="732">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="SET_ITEM_PARAMETERS">
<bi:cmd_item_parameters type="GROUP_ITEM">
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
</bi:cmd_item_parameters>
<bi:param name="TARGET_ITEM_REF" value="FILTER_GROUP_AREA">
</bi:param>
</bi:command>
</bi:param>
</bi:param>
</bi:param>
<bi:param name="BUTTON" type="COMPOSITE" index="2">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="707">
</bi:text>
</bi:param>
<bi:param name="ACTION" type="CHOICE" value="INSTRUCTION">
<bi:param name="INSTRUCTION">
<bi:command type="OPEN_VARIABLE_DIALOG">
</bi:command>
</bi:param>
</bi:param>
</bi:param>
</bi:param>
</bi:item>
</bi:item>
</bi:item>
<bi:item type="GROUP_ITEM" name="SETTINGS_GROUP_AREA" designheight="300" designwidth="600">
<bi:param name="CHILD_ITEM_REF" value="SETTINGS_AREA">
</bi:param>
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="VISIBILITY" value="HIDDEN">
</bi:param>
<bi:param name="WITH_CAPTION" value="">
</bi:param>
<bi:item type="CONTAINER_ITEM" name="SETTINGS_AREA" designwidth="600" designheight="600">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:item type="TABSTRIP_CONTAINER_ITEM" name="SETTINGS_TAB" designwidth="596" designheight="200">
<bi:param name="TABPANEL_LIST">
<bi:param name="TABPANEL" index="1">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="281">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="EXCEPTIONS">
</bi:param>
</bi:param>
<bi:param name="TABPANEL" index="2">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="282">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="CONDITIONS">
</bi:param>
</bi:param>
<bi:param name="TABPANEL" index="3">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="753">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="PROPERTIES_DP">
</bi:param>
</bi:param>
<bi:param name="TABPANEL" index="4">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="622">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="PROPERTIES_ANALYSIS">
</bi:param>
</bi:param>
<bi:param name="TABPANEL" index="5">
<bi:param name="CAPTION">
<bi:text program="SAPLRRSV" key="626">
</bi:text>
</bi:param>
<bi:param name="CHILD_ITEM_REF" value="PROPERTIES_CHART">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="HEIGHT" value="200">
</bi:param>
<bi:param name="INITIAL_TAB" value="3">
</bi:param>
<bi:item name="EXCEPTIONS" designwidth="300" designheight="120" type="EXCEPTIONS_LIST_ITEM">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:item>
<bi:item name="CONDITIONS" designwidth="300" designheight="120" type="CONDITIONS_LIST_ITEM">
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:item>
<bi:item name="PROPERTIES_DP" designwidth="400" designheight="150" type="PROPERTIES_PANE_ITEM">
<bi:param name="FULL_WIDTH" value="X">
</bi:param>
<bi:param name="FULL_HEIGHT" value="X">
</bi:param>
<bi:param name="PROPERTIES_SOURCE" type="CHOICE" value="DATAPROVIDER_PROPERTIES">
<bi:param name="DATAPROVIDER_PROPERTIES" type="COMPOSITE">
<bi:param name="DATA_PROVIDER_REF" value="DP_1">
</bi:param>
</bi:param>
</bi:param>
<bi:param name="PROPERTIES_SET" type="CHOICE" val -
Problems with passing parameters for WEB template in URL in NW2004s
Servus,
We have NW2004s, BI 7.0, SP9
does anybody know where do I make a mistake? There are 9 variables which the user has to fill out.
Passing the parameters in URL string for a web template like: http://server:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=TEMPLATENAME&var_name_1=ZvarX&var_value_ext_1=2000 ....
but this doesn't function, I get only the first variable screen and not what's set in my URL.
Is it a bug? Any suggestions?
Thank you very much
StandaI solved it.
Solution:
URL Link "http://......./TEMPLATE=nameofthepage&TEMPLATE=nameofthepage
&VARIABLE_VARIANT=nameofthevariant" -
Stateless=x parameter through url for web templates
Hello, maybe somebody could help me... i´m trying to use the parameter STATELESS=X in my url that i use for calling my web templates.
It´s possible to set the parameter at the end of the url or i have to insert after the template id... i mean... is this url correct ?
http://yourAppServer:yourPort/SAP/BW/BEx?sap-language=ES&bsplanguage=ES&cmd=ldoc&TEMPLATE_ID=PCMA002&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&VAR_NAME_1=ZEJPOP&VAR_VALUE_EXT_1=005.2007&VAR_NAME_2=VCMC01&VAR_VALUE_EXT_2=005&VAR_NAME_3=VCMC02&VAR_VALUE_EXT_3=2007&VAR_NAME_4=VPGNV080&VAR_VALUE_EXT_4=U3&VAR_NAME_5=ZPERIN&VAR_VALUE_EXT_5=%23&STATELESS=X
I´m asking this because it´s not working properly.. i get the following error wher i try to fill the variable for this instruction
javascript code
var pIFrame = document.getElementById( "SAP_BW_SNIPPET" );
I mean... the javascript code does not work ok with the option STATELESS but it works fine if i do not use it, anybody knows why??
Thanks a lot,
jcasasSearch forum for "anonymous" and "mime" to find previous answers for this question. One example is at [https://forums.sdn.sap.com/click.jspa?searchID=13102945&messageID=5221832].
Hope this helps...
Bob -
Retain variable values across web templates during a web session
Hi all,
How can we let web template get variable values from another template's variable values so as to keep the same entry values as previous report run?
For example 0vendor has a variable (for single, mandory) used in all vendor related web templates. "vendor1" was entered for the second template.
I tried to use "SET/GET PARAMETER" in variable user exit. It works in BI with RSRT, but it doesn't work with Bex or Web template. Looks like web session is not sync with the ABAP stack.
How about using cookie? How to create/reset cookie in variable user exit? Can we get variable values from web server memory or user session data?
Please share your thought !
Thanks for helping!
DavidHi Arun,
All the web templates are randomly run by user, there are no set of templates run after one template. Any templates can run after any other web template.
Basically we link web templates with portal menu items. any report can be run by any sequence. The thing the new report need to take the previous selection values from common variables. -
Variable Screen of Web Template iView
Deployed Web Template iView to Portal. But when ever i click on the link of the web template iview in the navigation panel in portal. Variable screen comes up first which is mandatory. Is there some way in the web application designer that i fill up the mandatory variable screen with values through some ABAP table interface or by using text elements web item without letting variable selection screen show up initially in the portal.
I cant make those variable values default by going in BEx because those varaibles are global variables and getting used in many queries.
Any help will be appreciated.
ThanksWe've just implemented a NetWeaver 2004s system, and these hints may help you out:
1. In the Web Application Designer, there is a property on the web template which determines whether the variable screen is displayed or not. Therefore, you could uncheck that checkbox, and the variable selection screen won't be shown.
2. As to defaulting values in the selection screen ... we have used ABAP code to default values in variables. I think it was done in the start routine. The code we have implemented works, but then we present the variable selection screen to the user, so I can see that certain values (like date for example) are defaulted. I am not sure what happens if you default these values and then don't present the selection screen ... assume it would work for you though. Check on SDN and find out about pre-popup ABAP code for queries, I am sure you will be able to find something that helps you out.
Cheers,
Andrew -
Missing LOIO & PHIO objects for Web template
Hi,
I have transported web template to QA from Dev. system and I am getting error message " Object not consistent obiviously because I have not transpoted LOIO & PHIO objects alongwith Web template.
I am trying to find these LOIO and PHIO object in transport connection(RSA1), <b>AS BHANU and others have suggested in this forum</b>, under web Template and where not, but I couldn't find it. My question is -where to find these objects or do I have to install any paches or something?
we have not created any role or workbook for any reports.
SunnyHi, ALL
I face some problem as Sunny, anyone can help us for transport LOIO & PHIO? and how I know how much LIIO & PHIO related to the special webtemplate ?
thanks very much -
Language Dependent Text for Web Templates
Hi All,
I have a text item in a Web Template and have used a language dependent text for its caption ( which is stored in a table).
The problem is that if i transport this Templates to an another environment, the language texts are not transported automatically.
Can you please let me know the table where this information of language dependent text is stored. I think I will also have to transport all the entries of the language dependent table.
Thanks in advance and I will definitely reward points for helpfull answers.
Regards,
VivekHi Guys,
Found the solution. The table name is RSBEXTEXTS.
Thanks,
vivek
Maybe you are looking for
-
I am working on an application which involves reading pressure data from two pressure gauges (differential and vacuum). My PC has two free serial ports. My questions: 1) Can I use the PC serial ports or is it advisable to opt for a NI 2-port serial d
-
I got a notification that I had Windows Updates that needed to be installed, however, every time I tried to download and install the updates, they would always fail. I looked up the error code I was getting and Microsoft provided a link to a "Readine
-
Missing large number of results through Bing Search API (web results only)
When making multiple calls to the Bing Web Search API (with a different $skip parameter), many queries I try seem to be missing many of the result I'd expect. For example, searching for the string 'obama' on bing.com shows 107,000,000 results availab
-
Transformation routine for Infoobject lookup
Hey guys, I am aware of Update rule routines but never done Transformation routine before. I didnt get any related post for my req. My requirement is on WBS element I have some attributes which is coming from std WBS Attr extractor but I have one cus
-
Server 3.2.1 (10.9.5) – Postgres won't start
After upgrading from Server 3.1.2 (Mavericks 10.9.3) to Server 3.2.1 (Mavericks 10.9.5), I cannot start Postgres: # serveradmin start postgres postgres:error = "CANNOT_START_SERVICE_TIMEOUT_ERR" Here is what I see in system.log: Sep 18 18:36:20 serve