Variable Substition in the Command Line field
Hi,
how is it possible to use the variable substition in the File Receiver Channel at the Operation Command field on a PI 7.11?
Have anybody an idea?
Regards,
Bülent
i dont think that is possible
Similar Messages
-
How can I open a PDF file and enter a word in the Find field from the command line?
Hi,
I want to use a PDF file as the help file of another program.
I have found somewhere an incomplete description of the command line parameters of Acrobat Reader.
It described how to open a file and jump to its given page.
I have written the following batch file based on that.
rem Open pdf (prm1) with Acrobat reader at given page (prm2)
"%adobe_rdr%\AcroRd32.exe" /N "zoom=73&page=%2=OpenActions" %1
The following batch file opens the search dialog:
rem Open pdf (prm1) with Acrobat reader
rem and search for something (prm2)
"%adobe_rdr%\AcroRd32.exe" /N "zoom=73&navpanes=1=OpenActions&search=%2" %1
I need the simple find field instead of the complicated search window.
Regards
FerencNot possible.
-
How to pass in variables using the command line when starting ActionScript native app
How do I pass in variables or startup arguments using the command line when starting an ActionScript native app? For example, I have my app call MySweetWidget and it has been compiled with Adobe AIR captive runtime so now I have MySweetWidget.exe.
In the command line, I am calling MySweetWidget.exe and would like to pass in variables or properties to the application. I would assume that those variables are then read from the loaderInfo.parameters object.
Please let me know if the Adobe AIR runtime supports passing in parameters to the native runtime. If so, I would like help determining the correct format of how to pass in the variables. Then would you read those from the loaderinfo.parameters object?
Thanks,
JeffI found the answer to my own question:
Yes it is a supported feature. It is documented on the following page:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/desktop/NativeApp lication.html#event:invoke
When you subscribe to the invoke event of the NativeApplication it will subsequently dispatch the event and you read the e.arguments Array object to get the startup arguments passed into the native application. -
[svn:osmf:] 13639: Attempt to fix the command line build.
Revision: 13639
Revision: 13639
Author: [email protected]
Date: 2010-01-19 14:58:36 -0800 (Tue, 19 Jan 2010)
Log Message:
Attempt to fix the command line build.
Modified Paths:
osmf/trunk/apps/samples/framework/DynamicStreamingSample/DynamicStreamingSample-build-con fig.xmlHi,
I am new to this field.
I imported the strobe media playback to my flash builder.
I am getting the error
unknown configuration variable 'swf-version'
When i imported the strobe media playback in flash builder
the ADDITIONAL COMPILER ARGUMENTS in the projec>properties>actionscript compiler>
was having value
-swf-version=11 -define CONFIG::LOGGING true -define CONFIG::FLASH_10_1 true
please help me out -
Error while running aiaconfig.sh - The command line argument(s) "weblogicConfig"
Hi.
We are Configuring PIP on AIA 11.1.1.7 after installing AIA PIP release. we we run ./aiaconfig.sh we are getting below error message,
$./aiaconfig.sh
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 169130 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-11-20_04-11-10AM. Please wait ...adevaia @soa-odi-dev1:/u02/app/Oracle/Middleware/AIAHOME/bin$ [WARN ][jrockit] MaxPermSize=256m ignored: Not a valid opt ion for JRockit
Log: /u01/app/oraInventory/logs/install2013-11-20_04-11-10AM.log
The command line argument(s) "weblogicConfig" or the install mode specified is not valid.
Copyright (c) 1999, 2011, Oracle and/or its affiliates. All rights reserved.
Usage:
config.sh [-mode] [-options] [(<CommandLineVariable=Value>)*]
Where mode include:
[Mode is a mandatory parameter. Only one mode can be specified.]
-silent For silent mode operations, the inputs can be a response file or a list of
command line variable value pairs.
Where options include:
-help, --help, --usage
Displays above usage.
-invPtrLoc <inventory pointer file>
Launches the installer with a custom inventory location. The invPtrLoc
should point to a file which contains the following information.
inventory_loc=<inventory_location>
inst_group=<group_name>
-response, -responseFile <response file>
Specifies the response file and path to use.
-jreLoc <location>
Path where Java Runtime Environment is installed. OUI cannot be run without
it.
-logLevel <level>
To filter log messages that have a lesser priority level than <level>.
Valid options are: severe, warning, info, config, fine, finer, finest,
basic, general, detailed, trace. The use of basic, general, detailed, trace
is deprecated.
-debug For getting the debug information from OUI.
-force Allowing silent mode installation into a non-empty directory.
-printdiskusage
Log debug information for disk usage.
-printmemory
Path where Java Runtime Environment is installed. OUI cannot be run without
it.
-printtime
Log debug information for time usage.
-waitforcompletion
For windows. setup.exe will wait for completion instead of spawning the
java engine and exiting.
-noconsole
For suppressing display of messages to console. Console is not allocated.
-ignoreSysPrereqs
For ignoring the results of the system pre-requisite checks.
-executeSysPrereqs
Execute system pre-requisite checks and exit.
-paramFile <location of file>
Specify location of oraparam.ini file to be used by OUI.
-novalidation
Disables the validations, can be invoked along with GUI or silent mode.
-nodefaultinput
Disables the default computation of values (pre-populating of values when
screen is loaded) in GUI install.
-nocheckForUpdates
To disable all updates checking
-updatesDir
To specify the directory where latest updates are downloaded. This could be
used in disconnected mode.
Command Line Variables Usage:
Command line variables are specified using <name=value>; for example:
[ session: | session:compName: | session:compName:version: ]variableName=" valueOfVariable"]
Installer variables are specified using:
varName=value
Ex: ORACLE_HOME=<value>
OUI Session variables are specified using:
session:varName=value
Ex: session:VARIABLE_NAME=<value>
OUI Component variables are specified using:
session:compInternalName:[Version:]varName
Ex 1: session:oracle.comp1:1.0.1:varName=<value>
Ex 2: session:oracle.comp1:varName=<value>
The lookup order is compInternalName:Version:varName, then compInternalName:varName
do anyone had any idea on this.
Thanks a lot,
RR.try checking relevant environment variables like the CLASSPATH.... a major source of failures in Windows is when in the classpath there is a path containing SPACES.... also enabling some "debug" or "verbose" flag (not sure how to do it) would provide more insight...
-
Hi
I’m upgrading our SSIS packages from SQL 2005 to SQL 2012 .
Everything is working fine in Visual Studio, but when I’m submitting dtexec.exe it’s finishing right away in the command line (the actual execution takes long time).
It looks to me that as the return code doesn’t pass properly.
As I have depending tasks how I can make sure all jobs will be executed in the proper order.
(We never had this issue in SQL 2005)
C:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn>dtexec.exe /ISSERVER "\"\SSISDB\Direct_Prod\Direct_SSIS_Package
\DD_Load_Customer.dtsx\"" /SERVER TORSQLSIS01 /ENVREFERENCE 2
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 32-bit
Copyright (C) Microsoft Corporation. All rights reserved.
Started: 10:21:55 AM
Execution ID: 21138.
To view the details for the execution, right-click on the Integration Services Catalog, and open the [All Executions] report
Started: 10:21:55 AM
Finished: 10:21:56 AM
Elapsed: 0.766 secondsAs per MSDN /ENVREFERENCE argument is used only by SQL Server Agent
see
https://msdn.microsoft.com/en-us/library/hh231187.aspx
below part is what it says
/Env[Reference] environment reference ID
(Optional). Specifies the environment reference (ID) that is used by the package execution, for a package that is deployed to the Integration Services server. The parameters configured to bind
to variables will use the values of the variables that are contained in the environment.
You use /Env[Reference] option together with the /ISServer and the /Server options.
This parameter is used by SQL Server Agent.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
How can hide the command line of a t.code in the portal
Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Sat Jun 12 20:26:39 2010
Module: icxxthr_mt.c
Line: 2698
Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory -
Is there a way to pass archive file name to the command-line control?
Hi there,
I have been researching the flash media live encoder laterly. But still cannot find confirmed anwsers on the following questions:
1. Is there a way to pass an archive file name to the command-line control when starting an encoder?
2. Can the username/password to the Flash Media Server be saved in the profile? If not, is there any otherway to provide(GUI mode) them automatically,
like as variables to a script?
Thanks a lot in advance.
Helen1. The only way to inform the command-line encoder about the archive file name is to save the FMLE session profile with the file name. The node for saving the file name is <output><file><path>C:\sample.flv</output></file></path>. The easier way to update the xml profile is to use "Save Profile" option of the GUI mode. If you want to programmatically update the file name, read the profile and update the node before launching the encoder. I hope this answers your question.
2. No. Credentials can't be saved in the profile. The only way to provide them programmatically is to use /ap and /ab commands for the command-line encoder. For GUI mode, there is no programmable option. But still you can try capturing keystrokes. -
Counting arguments in the command line
I need to write a snip of code that will check the command line to make sure there are 5, no more or less, arguments. If not I have to return an error message. Anyone have any ideas?
StephenThe command line args will be in a String[] passed to main(). Arrays have a length field that tells you how many elements they have.
http://java.sun.com/docs/books/tutorial/java/nutsandbolts/arrays.html -
Revision: 2716
Author: [email protected]
Date: 2008-08-04 01:18:12 -0700 (Mon, 04 Aug 2008)
Log Message:
SDK-15848 - Conditional compilation constants defined in flex-config.xml are never used if a single constant is specified on the command line
* There's a possibility this will break a conditional complication test which disallows overwriting an existing definition -- I don't know if that will break the build, but the test should be removed either way.
* Using append syntax ("-define+=" on the command line or ant tasks, or append="true" in flex-config) and redefining a value works now if you use an already-defined namespace and name.
* So your flex-config may have -define=CONFIG::debug,false, and you may want -define+=CONFIG::debug,true from the commandline build, or FB build.
* Made the ASC ConfigVar fields final as a sanity check since overwriting is now allowed. It would be harder to track changes and subtle bugs if they were mutable. This means that you must build a new ConfigVar object if you need to make changes.
Bugs: SDK-15848
QA: Yes. Please read the updated javadocs in CompilerConfiguration. Tests need to be added to validate that overwriting is allowed, and happens correctly in different situations: I believe the order should be that flex-config is overwritten by a custom config (can we have more than one user config? is the order deterministic? I forget...), is overwritten by commandline or OEM. Did I miss any? (I didn't write code which changes this, it works however the existing configuration system allows overwriting and appending; if we have tests for that, maybe we don't need them duplicated for this feature.)
Doc: Yes. Please read the updated javadocs in CompilerConfiguration.
Reviewer: Pete
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15848
http://bugs.adobe.com/jira/browse/SDK-15848
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/ConfigVar.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMConfiguration.javaPlease note: I AM USING:
JkOptions ForwardKeySize ForwardURICompat -ForwardDirectories
And that's what's supposed to fix this problem in the first place, right?? -
What happens when a program name is typed on the command line?
I mean I know what HAPPENS but I need to know the sequence of events. How would I describe it?
i.e. java MyProgWhat is this? Are you taking a take-home exam on basic computer operation? You're asking very similar questions about broad things.
Anyway:
1) the shell parses the command line. it gets a sequence of tokens which are basically just individual strings
2) the shell identifies which tokens on the command line are executables, and which are arguments to those executables. It also figures things out like how to chain the output of one program to the input of another, although this doesn't apply in the example you gave. In your example, "java" is the executable and "MyProg" is a string to pass to the executable as an argument.
3) The shell then searches for the actual program file corresponding to the token that refers to an executable. The shell looks at the PATH environment variable to find a list of directories; it then looks in each directory until it finds the program file. So the program file here would be "java.exe" on a windows system.
4) It then spawns off a new process to run the java program, passing the MyProg string to it as an argument.
Does that help? -
At times I type in a site name on the command line which I want to visit. This goes into a file which is accessed by highlighting the triangle on the right side of command line. This file contains previous sites which were accessed in the past. How do I edit this file and and remove previous site URLs?
Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*https://support.mozilla.com/kb/Clearing+Location+bar+history
*https://support.mozilla.com/kb/Cannot+clear+Location+bar+history -
Reading commands from the command line
Ok I've read quite a bit about streams, and I get the gist that you are suppose to open up a "stream," whether it from a file or from something else, and then you have to do all sorts of stuff to it like activate it or something, or whatever. But all I want to do is take an input from the command line, for example my name, and have it output "Hi [name]." I could swear I've done this before with a simple command like
System.in.read() or something like that, but I read up on it and read is not a method that does that? So how does one just do a simple command line input into a variable...for what I want to do is control movement on a maze. If somebody can direct me to some documentation I would be happy as well. Thank youbtw - "deadseasquirrels" - like the name. Have another program;-
import java.io.*;
import java.util.Random;
public class Do_Writing {
public static void main( String args[] ) throws IOException {
BufferedReader in = new BufferedReader
(new InputStreamReader(System.in));
Random rand = new Random();
int i = 1+ rand.nextInt(10);
String s1;
System.out.println("Guess a number between 1 and 10");
try {
while ((s1 = in.readLine() ) != null) {
// if( ... I'll leave the rest to you to figure out
// when they get it right don't forget to include;-
System.exit(0);
in.close();
catch (IOException ignore) { }
} -
Could not view data in the Em while in the command line query works
Hi, all,
I have met with this problem for several times.
I have an Oracle 10.0.2.0 running on Redhat linux E3.
After I insert or just input some data in a table. I could see the new data in the command line.
SQL> select * from tablename;
But I could not see the new data in the EM. If I export the table to, say, MS Access, the new data doesn't show. The data is there, but I have to wait for some time. (several mins to hours)
Do you have any idea of it??
Thank you very much!
QianThank you for your reply.
Why sometimes it doesn't show in other sessions, but sometimes it shows?
Any way, I will perform commit to see....
Qian
Message was edited by:
QianChen -
I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks
>SystemPreferences>Network>DNS
Maybe you are looking for
-
EXTREMELY URGENT: % Cost (out of Total Costs) Column in Report Painter
Hi Gurus, I'm not new to Report Painter, but, am stuck at one thing. In report, Col 1 shows Costs by Administration (row 1), Labor (row 2), Others (row 3) and total (row 4 being formula as total of row 1, 2 & 3). Client wants col 2 to show % Cost of
-
i broke iphone 5s gold screen and i wanna change it to new one how much will it cost me ?
-
I have a bare minimum script with the following line (also had the line echo Hello World, but removed for simplicity). #!/bin/sh <-- only line of code currently in the file when I try to run, I get the following error. Likewise if the line is #!/bi
-
USMT is failing with error 71 for all users in a specific office when backing up to a specific share: COMPUTERNAME\Guest, administrator: No, interactive: Yes, logged on: No, has profile: No DOMAIN\USERNAME, administrator: Yes, interactive: Yes, logge
-
New Hard drive for MacBook Pro 2008
Hi, My 2008 MacBook Pro is really slow and I was told I could update my hard drive on it and upgrade the memory and speed. Does anyone by any chance know which one will work for my laptop?? It its the fall 2008 model Processor: 2.4 GHz Intel Core 2 D