Could not view data in the Em while in the command line query works

Hi, all,
I have met with this problem for several times.
I have an Oracle 10.0.2.0 running on Redhat linux E3.
After I insert or just input some data in a table. I could see the new data in the command line.
SQL> select * from tablename;
But I could not see the new data in the EM. If I export the table to, say, MS Access, the new data doesn't show. The data is there, but I have to wait for some time. (several mins to hours)
Do you have any idea of it??
Thank you very much!
Qian

Thank you for your reply.
Why sometimes it doesn't show in other sessions, but sometimes it shows?
Any way, I will perform commit to see....
Qian
Message was edited by:
QianChen

Similar Messages

"Your disk could not be partitioned" "An error occurred while partitioning the disk"

hello, i am operating on a model a1286 mbp mid 2009 laptop, with 4 gb ram 360 gb hdd,
snow leapord updated to maverick,
bootcamped w/ win 7 32-bit
i tried in mac os x maverick to use bootcamp assistant to partition my bootcamp 180 gb partition to be erased and then to start the install of 64-bit.
the partitioning was stuck at about 17 percent for an hour, so i quit the bootcamp assistant - ive seen on reddit this was a bad thing to do, but i did it anyway because i saw someone posted about being to reboot and do a hdd repair then reboot and try to partition again
now when i startup my rEfit program that shows me option of loading mac os x maverick or Bootcamp Legacy Os instead of bootcamp win 7 32-bit
when i tried partioning again its asking me to free up space for 28 gb in bootcamp assistant , i did that, inserted win 7 64-bit dvd install and hit continue dialogue button in bootcamp assistant
this is where i see i only have 145 gb used in mac os x with 18 gb free and in the windows side 14 gb
status partitioning disk,
but then i get an error message saying the partition failed with errors
i googled and saw i had togo into single user mode by pressing cmd-s during boot and typing /sbin/fsck -fy
i got a msg saying this command function is not recognized. - along those lines
how do i reboot and start a repair of the disk?
also i did a repair file permisions in disk utility but forgot to put back the power cord, so the battery drained and i assume the repair file permissions didnt finish and the mbp just auto shutdowned
is there a command i could enter into the EFI shell? or single user mode? to repair the hdd partition in the mac os x maverick and the bootcamp legacy os side since the first time i tried erasing everything on the win 7 32-bit side bootcamp assistant got stuck at 17 percent partitioning then I voluntarily quit the program = now i cant partition bca gives me error of:
"Your disk could not be partitioned" "An error occurred while partitioning the disk"
thanks in advance,
-r

Is that the complete error message? Are you trying to partition the correct drive? It may be that you do not have enough contiguous free space on the drive for the partition.

Could not start transport control program tp while releasing the TR

Hello experts,
i have a problem if any one phase this kind of problem & if u know the solution please share to me its urgent
problem in Development system ,for this i had updated kernel , TP patch level , R3trans patch level in development and quality system , but still the problem is occurring in development system . while releasing the Transport Request this error is coming that too not in frequently some times it is happening some times it not happening ( some times its working fine )
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An
error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway
Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then
execute the command again.
please suggest me what can i do for better , how can i resolve this issue
Thanks & Regards,
Narasimha

Hello experts ,
Last one and half month on-words we are phasing some problems on STMS
while releasing the Transport Request getting this error messages on
status-bar
1. "could not start transport control program tp"
2. while importing the TR into quality system getting this error message" RFC Error :timeout during allocate/CPIC-CALL "
3.while forwarding the TR from QAS to PRD : " RFC Error :timeout during
allocate/CPIC-CALL "
after continues refreshing,we are able to release the request and importthe request into quality system. But after some time again same problem
coming
for this we did the kernel upgrade , tp , & R3trans update and STMS RE-
Configuration etc...But no use with this we got the same problem after
finishing all these workaround , but don't know what happened after 2-3
days STMS starts working fine DEV-QAS-PRD ,
Now we are in the same problem after continues refreshing,we are able torelease the request and import the request into quality system. But after
some time again same problem coming
please suggest us what could be the reason behind this & what we can do
for better

HT201210 I was updating my iPhone 3GS, left it overnight and woke up to find that there was an error and my IPhone could not be restored. What can I do to make my phone work again? Have I lost all the data?

I was updating my iPhone 3GS, left it overnight and woke up to find that there was an error and my IPhone could not be restored. What can I do to make my phone work again? Have I lost all the data?

If your phone is in recovery mode, all data are gone. Connect the phone to iTunes on your computer and restore.

I hv a 3GS iphone. it could not be boot up. When i press the sleep/wake button, the apple logo appeared for a while and then disappear. My phone could not be start up. When i go to itune, it does not have the logo for me to sync.

I have a iphone3GS. It could not be boot up. When i press the sleep/wake button, the apple logo appear and then disappear. The password login screen didnt' come on. When i tried to connect my phone to the itune on my laptop, there isnt this button that i can sync my phone with the laptop.

Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg

Error - The request could not be performed due to an error from the I/O device

Hello,
I have a Hyper-V server with a few virtual machines.
The host runs Windows Server 2012 R2 with Hyper-V.
VMs are Windows Server 2012R2 Generation 2 and Windows Server 2003 Generation 1.
All VMs running on VHDX on local host disks, no raid, no storage. Most VMs run on dedicated disks.
I am having the following error when I demand large amount of I/O on VMs:. "The request could not be performed due to an error from the I/O device"
This error happens when I run robocopy which requires large amount of writing, or on a SQL 2014 VM which also requires many reads and writes.
Whenever this error occurs, the replicas of the VMs require resynchronization and the MSSQL service stops.
Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs.
Is there any special configuration that must be done to avoid these errors?
Thank you!
Rafael

Hi Eng.Rafael Grecco,
>>Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs.
>>Chkdsk /r didn't return any error.
It seems that it is not a hyper-v issue .
I would suggest you to keep the driver up-to-date for your hyper-v host .
In addition , here is a similar thread :
http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/the-io-operation-at-logical-block-address-for-disk/23c32152-c2a6-4c6d-b229-95dc1470231a
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

How do I resolve this problem: This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required

When attempting to log in to the web site the following message is received. This web site works
on other systems using Firefox.
This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.
Additionally, a 401 Authorization Required error was encountered while trying to use an ErrorDocument to handle the request.
== URL of affected sites ==
http://www.mdyc.org/members_only

You may have saved a bad password so Firefox is entering that rather than giving you the option to try again. Go to Tools > Options > Security > Saved Passwords and delete the saved passwords for that site and then try logging in again.

The document could not be saved. There is error reading the document(23).

HI ,
Im getting error : the document could not be saved. There is error reading the document(23).
Had tried de-select "Save As Optimizes for Fast Web View". error still persist.
Pls help. Thanks

Hi,
I am moving your posting at Acrobat.com forum to Acrobat forum.
Hisami

What do i do when Itunes says "Itunes could not load data from sync services reconnect or try again later

Hi, just recently when I attemted synced my ipod touch 5th generation, i got a message saying
"Itunes could not load data from sync services reconnect or try again later
I am running the latest version on itunes (not quiet sure which specific one)
I am running ios 6.1 my ipod is not jail broken
don't know what to do
I then cleard the message and my ipod showed up and began to sync
however it is staying at the backing up stage for 12 hours
Not sure what to do help!

Try:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
"load data class"

HT1695 IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
However to my disappointment, landed back at the same status which says
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care
I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
Guys ... Need the data desperately ... Can anybody please help???

"could not deteremine data types of all wires"?

OK, so I am porting a pretty large project over to LV8 from LV7.0
And for one of my VIs I am getting the error "could not deteremine data types of all wires"
When I double-click on the error, it brings up the front panel.
huh?
I don't see any problems with the block diagram at all.
All of my shift registers have colored wires, so I assume that the wires' data types are resolved.

Update II: Apparantly this bug is somehow related to the enum's name (and maybe location on disk?).
I re-created the enum from scratch under the name "Trial Enum STYP.ctl" when I dropped it into a new subVI's diagram it didn't break the VI.
I renamed it "Main STYP.ctl" and dropped it in; broken VI
I renamed it "Trial Enum 1 STYP.ctl"; broken VI
I renamed it "Trial Enum STYP.ctl" again; not broken.
Here be dragons!
Note: I actually got one to work by opening it when it was named something "good", and then using "Save As..." from within LabVIEW to change the name to what I wanted instead of changing the name in Windows Explorer.
Message Edited by LVRob on 12-06-2005 03:33 PM

"could not open key, unknown\components" error while reinstalling

I'm getting a "could not open key, unknown\components" error while reinstalling latest Itunes. Tried several time with same results

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Could not initialize photoshop because of a problem using the adobe color engine (Win 7)

Was running the lastest version of Photoshop CS5 and added a second quad graphics card and 4 more monitors. Now PS will not start and I get the error message "could not initialize photoshop because of a problem using the adobe color engine."
Computer has 2 NIVDIA Quadro4 NVS420 graphics boards with 8 Samsung SyncMaster 1920x1080 monitors. If I disable 4 of the monitors CS5 starts normally. I do not have to remove the added graphics card. When I extend the desktop again to all 8 monitors I get the error above.
How do I trouble-shoot the problem? Is it Photoshop, NIVDIA or Windows 7?

Well, not exactly a full solution yet (at least for my setup), but I am certain now that this issue is (mostly) caused by nVidia's drivers. You may be able to fix your setup by simply installing the latest drivers for your NVS420 cards (266.45 for Win 7/64 rel. 01/12/2011).
Since you are using two identical cards, this could do the trick.
Caveats - Make sure you:
1. Select Custom Install, the Express Install will most likely not work properly.
2. Unselect the Audio Driver (if available), the nVidia HD(MI) Audio driver could
screw up your speech recognition (if you use it) or other audio software - it did for me.
3. Select Clean Install. If you don't, files like C:\Windows\System32\drivers\nvlddmkm.sys
and several other driver related files will not be overwritten, causing all sorts of neat effects.
4. After the Install is complete, reboot your system whether the Installer prompts you or not.
After testing various configurations, disabling two - six of my eight monitors I am at this point:
I am now using nVidia's lastest and greatest piece of crap (read driver), version 266.58, released just two days ago. After an initial snag with maximized windows extending to the bottom of the main monitor (underneath the taskbar), a re-install & reboot solved that issue.
All three driver versions tested (260.89, 260.99, 266.58) now allow me to start PhotoShop without any problems; providing I first disable the two monitors fed by my onboard graphics (nVidia 780a based), leaving me with six monitors connected to three GTS-450 cards. I can even re-enable the two other monitors once the program is open, and it continues to work fine. However, I must disconnect them again for the next start of PhotoShop.
On an interesting side note:
After disabling six monitors (leaving only two on a GTS-450), I was also able to open and run SoundBooth CS5, which previously would not open, citing the audio driver as the problem. After sucessfully starting SoundBooth I could re-enable all six other monitors (incl. onboards),
and that program now opens and works fine with all 8 monitors connected. [ODD !!!]
Other than Adobe Software, I've had only one other issue with my setup:
When playing online poker at PokerStars, occasionally and quite randomly one of multiple tables would freeze up. I'll try disabling the two onboard monitors for that program as well to see whether the random freezes stop.
Overall, while I think that Adobe produces fine software and nVidia has been in need of an overhaul for quite some time now, I also think that Adobe and nVidia software engineers need to work more closely together to ensure that problems like this don't arise in the first place after a product has been released to the public. IMHO, this is avoidable!
PS:
Here's a link to a great tool for multiple monitors, Display Fusion by Binary Fortress.
I use the free version, it allows you to do cool things like have individual wallpapers for all
your monitors, or stretch a single image across all monitors. With the Pro Version ($25),
you can also add individually customizable taskbars to each monitor, and a lot more.
http://www.displayfusion.com/

Could not activate data connection

I have a new 4s unlocked but when I put my Tmobile chip into the device I get a message like your not subscribed to a mobile data service or could Not activate data connection
There is also no manual APN settings but everything works fine with a vodafone chip

im so releaved i changed my apn settings, i phoned apple twice ,cydia tweaks, i tried several sims in my device, i gave it a system restore, i set it up as a new device.
and in the end i phoned tmobile and it was fixed in amatter of five minutes it turned out after i had activated the micro sim and setup pay and go tethering and my 12 months free web something had gone wrong on there end.
THANKS SO MUCH ANYWAYS GUYS
yes it was unlocked i think tmobile did not add celular data to my account its just odd cause it worked fine and suddenly stopped

Could not view data in the Em while in the command line query works

Similar Messages

Maybe you are looking for