Various problems in certains games.... please help me guys

Hi, I have a weird problem when I start up Pacific Fighters and Chronicles of Riddick.
The thing is, the game takes at least 15 minutes to open and when using the Caps Lock key, the green button on the keyboard takes quite some time to enlighten because the PC lags badly, so is the sound. In PF, the music is terribly affected when this bug occurs.
This happens about the 1/5 of the time I try to boot the game and the only ways to fix the problem is to:
1) Simply restart the computer;
2) Set the computer to sleep mode and then, come back to the game.
All of my games and my drivers are up to date and something important I'd like you to know is:
When the game boots normally, I can play easily up to 3 hours without any problem. Right now, I have about 15 games installed on my PC. Just to numerate a few, I have Far Cry, Half-Life 2 and never encountered any problem with these games.
On the other hand, Battlefield 2, when trying to connect to the server, will freeze and then again, the Caps Lock light on my keyboard will have problem to open (So that shows that the PC lags a lot) and then, it will de-freeze and the game says that I was disconnected from the server (That's quite normal, I've been inactive for 30 seconds). Yet, after returning to the game, the PC isn't completly in its original shape as when using the Teamspeak program, I can hear the others talking but their voice is quite sluggish and skipped every 5 seconds. The sound does the exact same thing in Pacific Fighters when it freezes (It goes mostly as follow: Clack clack clack clack, you know what I mean?)
If someone, please, knows why I have this problem, any help would be greatly appreciated. I have above 15 000pts in 3Dmarks 03 and my global performance on my PC is very good, except for this annoying bug.
In BF2, I didn't encounter any problem before, so I don't understand...
I have a
-Amd athlon 64 3000+ venice @ 40 degres in ful load
-Asus A8N-E @ lastest bios + driver 6.70 @ 38 degres in full load
-Msi NX7800GT @ 81.85 driver @ 45 degres in full load
-Soundblaster live 24bits
-Disc dur 160GB WD SATA II that has just been defragmented with diskeeper and that contains no viruses
-Thermaltake 420WATTS purepower
-3x512 DDR 400 OCZ
I also get problems in Bf2 clean sweep map only and only at 1 place : see http://img154.imageshack.us/my.php?image=screen0028ud.jpg
And also in BF:V http://img131.imageshack.us/my.php?image=bit6oz.jpg
Thanks to read this and please help me

I also want to precise that in BF:V, this is the only vehicle that is bugged like this..

Similar Messages

TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours.

HT201363 Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?

Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104569)

Developer 6 Timer Problem... Please help

Hi all,
I have installed Developer 6(Oracle Product) on my system. I am facing a strange problem whenever I try to use Create_Timer built in. The cursor moves to starting of the Item being modified as soon as the space bar is pressed (timed for timer expiration). If I remove the Built-in the problem is resolved.
Please help urgently.
Regards
Anand

Upgrade to the latest patch and the problem shoudl go away - this issue was fixed I think in 6.0.8.13+
You can also try setting Keey Cursor position to Yes on the item.

Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

After you install Apple driver to enable the audio chip, YOU then need to manually download and install (Cirrus or Realtek audio depending on the Mac).
Cirrus realitypod mac audio driver
MacBook Pro '10 Cirrus Logic CS4206A (AB 11)
Realtek Drivers

Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me? Regards Eddie Johnson

Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?

Eddie,
There is a forum specifically for Boot Camp & MS Windows users. Because that is where the Boot Camp guru's hang out I'd recommend re-posting there.

HT1926 i've tried so many times but the problem still exists! please help!!

i've tried so many times but the problem still exists! please help!!

Could you describe what your problem is, please?

What to do when iTunes cannot sync my iPad 3. Problem Event Name: BEX (Please Help)

What to do when iTunes cannot sync my iPad 3. Problem Event Name: BEX
Please Help to solve...

Hi Ahmed,
In iTunes, go to the Store in the left menu, select iTunes Store, wehn it opens, make sure you are on the home screen (icon of a house in the menu bar) and from the righthand side, select Account.
Next you will see all of your account information. Just a little don, you will find: Apple ID overview, there it says, Authorised computers; click on the button to deauthorise.
And you should be done.
Grtz, Carl.

No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help? Thanks

No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks

This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
https://discussions.apple.com/thread/2475631

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

Have you tried to reboot your phone(hold home and lock button simutainiously)?

I cant update my macbook pro to mac os x 10.9.2 what do i do please help me guys..

i cant update my macbook pro to mac os x 10.9.2 what do i do please help me guys.......

First off, you need to post in the correct forum. 10.9.2 is not the same as Mac OS 9.2. (12 years separate those two).
I'll ask this thread be moved.
Secondly, look at your Apple menu -> About This Mac and tell us what you have now.
If it is some version of 10.8, you can upgrade to 10.9, and then 10.9.2 free:
https://discussions.apple.com/docs/DOC-6131
If it is some version of 10.7, check the system requirements for 10.8 first, to determine if you can go straight to 10.9, then 10.9.2:
https://discussions.apple.com/docs/DOC-3761
If it is some version of 10.6 or lower, read this tip:
https://discussions.apple.com/docs/DOC-6271

TS3694 somebody help me restoring my iphone4s i got An unknown error(3194)please help me guys thanks

Somebody help me restoring my iphone4s i got An unknown error(3194) while restoring it!!please help me guys thanks

EIther way there is nothing wrong to try to fix it since Apple does not support it anyway

PROBLEM WITH NEW ROW --- PLEASE HELP

Hello,
I've had it with the framework. It's been 20 hours and counting that I am trying to insert/validate a new record.
Things just don't work as advertised.
Here's the situation:
I have an entity object with various validation rules in the validate() method.
Then I have a simple JSP page to insert new records.
At submit of button, I follow the framework's default
create new row and fill it up, with the difference
that i need to validate the row as soon as I fill it up
with data from the http request:
<jbo:OnEvent name="Create">
<jbo:Row id="newrow" datasource="ds" action="CreateInRange" >
<% try { %>
<jbo:SetAttribute dataitem="*" />
<%
newrow.validate(); //******* NOTICE HERE THAT I VALIDATE
} catch (JboException ex) {
newrow.remove();
throw ex;
} %>
</jbo:Row>
</jbo:OnEvent>
Unexpected behavior 1: If the validation fails,
newrow DOES NOT GET REMOVED!!!! I know this
since when I view data thru a data table component,
the row is there WITH THE ERROR INFORMATION set!!.
If I do a commit transaction, then the erroneous information ENDS UP IN THE DATABASE!!!!!
Unexpected behavior 2: If I do a rollback, every
call to subsequent pages results in a jsp error:
java.lang.ClassCastException: oracle.jbo.html.jsp.datatags.OnEventTag
PLEASE HELP.
Chris Lambrou

I have (hopefully) found a solution to my part of this problem. I was getting the ClassCastExceptions on any page with a <jbo:row> tag after doing a failed DML action. I have tested this with the delete event. (btw, I am using jdev9.0.3.3 w/ BC4J/JSP) Before what I was doing was this:
<% try { %>
<jbo:Row id="delrow" datasource="ds" rowkeyparam="jboRowKey" action="Delete" />
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
If I removed the try/catch block everything worked fine. Unfortunatlely, I need to try/catch block here. To work around the problem I changed the code to this:
<% Row rowDelete = ds.getRowFromKey(params.getParameter("jboRowKey")); %>
<% try { %>
<%
rowDelete.remove();
%>
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
The second bit of code does the same thing (but it doesn't use a bean like I think <jbo:Row> does) and it doesn't cause the ClassCastError on subsequent errors.
I really hope this helps someone else because it took me forever to get a workaround!
~Rob Lundeen

Ps4 Controller not responding in game please help!

My controller has been fine for the past year and a bit, but is now not working in game. It is fine when I am on the home screen but when I start a game all controls except the home button stop working and I cannot play, this problem has occurred in all the games I've tried to play and I have only very recently had this problem. Please help!

Try pressing the reset button on the back of controller.

Video card or driver problems with an N200, please help!

I have a lenovo 3000 N200, it is really cool, runs even games quite well, including newer ones.
But, is it normal to for the display driver program to freeze out in Warcraft 3? It always does that, when accessing the list of maps in the game and after 3-5 mins during an actual game. It sets the resolution down to 640X480 (from 1280X800) and in 16 color. I have to reset it in order to make it work. Also it does the same in Spore - though after having the driver written for Spore installed, ( which I downloaded from lenovo's site ) I haven't encountered that problem so far. Also Second Life shuts down - thankfully it does not freeze the drivers. I understand that the model I have is not meant for gaming but if it can run Warhammer 40k: Soulstorm at meduim graphic settings (on widescreen) without a lagg I can't understand why it wouldn't be able to handle warcraft 3 - that even an ATi m200 express can handle. I mean an X3100 from Intel must be far more powerful. (Said ATi card laggs with older games like Unreal Tournament)
I have the latest driver - official - and a Win Xp pro Sp2. I always keep my system up to date - save for opsys but so far driver did not need sp3 - and virus clean.
Please help me?
Solved!
Go to Solution.

Well, Unreal Tournament 2004 runs flawlessly on max graphics - though simple Unreal Tournament laggs like hell with all possible settings - also, as I said Dawn Of War and it's expansions run well on med graphics. The Suffering Ties That Bind runs also good on highest settings - though there is a bit of degradation compared to my tabletop pc's performance. Disciples 2 ran - of course - well, there were some texture problems with it but Heroes 5 ran quite well even on higher settings (as I mentioned it sometimes blunted down the textures but not always and it ran without a lagg). Alien Versus Predator 2 ran on max graphics, and there was no trouble, save for the aliens' special vision (that white thing that looks as if inverted colors) didn't work - aka was only a black screen - and that the crosshair of the smartgun was only a blank red/green block on the middle of the screen.Oh, and Command & Conquer: Generals Zero Hour works on highest settings without a lagg, along with Quake 3, and Jedi knight : Academy. It even runs Perfect World on high settings and only laggs in bigger towns - but that also might be because of the tremendous bandwidth usage that occurs. Even Red Alert 3 was able to run, but I would only advise that for RA fanatics, on low settings it was playable. Also, C & C: Tiberium Wars runs better than RA 3 , if you like that it is quite playable and worth a try. As you can see I have put it to it's limits to see what it can endure. Unreal Tournament 3 ran, though was gruesomely degraded and then it gave me the blue screen of death; so I quickly uninstalled that. Other than the forementioned program I had no real problems with the card, but the existing problems are a pain in the ... well we all know how bothering it can be when one is unable to play his/her favourite game (that should really run flawlessly).
Doesn't vista eat up too much of the system resources? A friend of mine was complaining about his n200 that vista is too slow on it and it eats up too much processor/memory.
Also, still no new on videocard front... Asked around if anyone knows, but I am guessing that maybe even Blizzard - referring to my Warcraft problem - shows more compassion to their forums and users than Lenovo, so I'll ask around there too.

Various problems in certains games.... please help me guys

Similar Messages

Maybe you are looking for