VAT availment on Capital Goods

Hi friends,
I have a requirement in VAT. As we do in Excise capital goods purchase, 50% availment in the current year and balance to be availed in the coming year, the same process has to be adopted for VAT credit availment for capital goods. Is it possible through the standard functionality or what is the best option to do this ?

Dear,
It can be done in the standard system but it will require mnaul control over the credit to be availed in the subsequent year.
Create two condition type for VAT input and two account keys to be mapped to these condition types. If you VAT is 10% then one condtion type for 5% and other with 5%. Thus both account keys where GL has been mapped will have equel amount then you decide which account you want for next year utilization.
Regards,
Chintan Joshi

Similar Messages

Availing 50% Capital Goods

Hi,
Cenvat on Hold :
Unable to avail credit 50% balance of previous years credit on capital goods.
Error message appears-Cenvat reconcile
How to go with this?
Will be rewarded.
Regards

Hi Santhosh,
When Capital On-Hold is taken for a year(for vendors) and selected a Vendor and when Transfer Credit is clicked,the error message appears.
Please find the exact erro message.
Cannot Reconcile : Crossed Return Date, please Reverse
Message no. 8I582
Regards

VAT 50% availment on Capital Goods

Hi!
My client is asking for 50% availament on VAT also in case of cpaital goods purcahse in additonal to normal CENVAT.
As per standard now, they can avail CENVAT 50%, but client is expecting same thing to be happen in case of VAT also.
how can we achive this?
regs,
ramesh

thanq

50% Credit in VAT for Capital Goods(Assets)

Dear SAP MM Experts,
My client need to take 50% VAT credit in the First year and remaining 50% in the next year for Assets(Capital Goods). Currently I have configured 50% Cenvat credit for Excise duty, it was working very well using J1ID.
But for VAT, what configuration is necessary to take 50% VAT credit for Captial goods(Assets). Right now I use JVCD for taking 100% to VAT and JVCN to make it as inventory(Non Deductible).
Please do the needful.
Thank you.
Regards,
Baskar

This is standard behavior of SAP. In case domestic purchase, we can avain 50% CENVAT on additional excise duty (AED).
But in case of Import , we can avail 100% CENVAT for capital goods on additional customs duty (ADC).
Understand the difference between ADC & AED.
Try to convince client for the same. If he is not convinced, better write to SAP. Don't make changes related to subtransaction type 'IP'.

Unable to avail credit 50% balance of previous years credit on capital good

Dear All,
Cenvat on Hold :
Unable to avail credit 50% balance of previous years credit on capital goods.
When Capital On-Hold is taken for a year(for vendors) and selected a Vendor and when Transfer Credit is clicked,the error message appears.(TCode - J2I8)
Cannot Reconcile : Crossed Return Date, please Reverse
Message no. 8I582
Pls guide.......
Regards
Sachin

Hi,
The above error message looks to be a strange one in J2I8.
As per the above message, check whether there is any pending subcon-challans due for reversal using J1IFR transaction.
Also check whether you are getting subcon challans in J2I8.
Finally, check whether any SAP notes are available.
Thanks & Regards,

Setting in Tax code for VATABLE VAT on Capital Goods

Can anybody tell me setting of Vatable VAT in Tax code on Capital Goods in Calculation Procedure Taxinn

Hi
first check the all conditions assign with pricing procedure.
check tax code assign with co code and for vat condition type created the condition records or not ?
check the validity periods of condition records.
laxman

Availing full CENVAT Credit for Capital goods

Hi,
In our client, they want avail full cenvat credit for Capital goods in the present fiscal year itself. How can we do this in SAP? Plz. explain me.

Hi Pawan,
You cannot avail total 100% Credit on the CENVAT paid on capital purchase as per the goverment rules.
The puirpose of maintaining the goods as capital goods are that you are only eligible for 50% credit in the current fiscal year and remaining 50% Credit in next Fiscal Year. its nothing that we configured, it is standard functionality in the country version. The Excise Transaction Type CAPE which come in to play at the time of capital procurement.
1. If your Client Requirement is to take 100% Credit for this material, then ask them to maintain Chater ID for this Material in J1ID as RAW materail. and During Excise Auditing period your client has to give relevent explaination to Excise Authority.
2. If your client has maintained in J1ID as capital , you can take the Remaining 50% Credit in current fiscal year also using J2I8, Before using this transaction verified from Excise Authority.
Or else As per my knowledge you cannt take 100% excise credit for Capital goods.
Cheers
Manoj K Singh

VAT ON CAPITAL GOODS,

Dear EXPERTS,
I am using condition type JVCD AND JVCN for calculating tax on capital goods purchase, I have maintained condition type JMOP & JMXI. The Excise base value is calculating fine, but VAT is NOT calculating in PO, Please suggest me what setting i have to do,
W\ith regards,
ARABBAS

Hi
first check the all conditions assign with pricing procedure.
check tax code assign with co code and for vat condition type created the condition records or not ?
check the validity periods of condition records.
laxman

50% credit on capital goods for previous year is not availed

Dear All,
The go-live date for my client was 01.10.2009. Now, in Apr, 2010 when the client is trying to get the 50% credit on Capital Goods (t. Code j2i8), system is not generating any data of the previous year. (From Oct, 09 to Mar'10). However, if we see the GL Balace for 'Cenvat On Hold A/c' as on 31.03.2010, it shows a balance of Rs. 2.50 lakhs approximately.
Can you please tell me why system is not showing any details through j2i8 for previous year?
Thanks & Regards,
Reshma

Hello,
The settings before 01.04.2010 were same. However, after thorough checking of the GL A/cs, I have following observations -
1) Plant 1 - Balance as on 31.03.2010 in Cenvat on Hold A/c -Rs. 195080. It is upload balance & t.code used is FBVB
    There are some more transctions in this A/c which are reversed due to wrong entries.
    Balance in Excise Duty RG 23 C as on 31.03.2010 - NIL
2) Plant 2 - Balance in Cenvat on Hold A/c as on 31.03.2010 is Rs. 166701. Again this is an upload balance with FBVB
    Balance in Excise Duty RG 23 C as on 31.03.2010 - Rs. 56931.62
3) Plant 3 - No upload balance. All the transactions are routed through J1IEX except 1 from FB01
    Balance as on 31.03.2010 - Cenvat On Hold A/c - Rs. 86876.06
                                                 ED RG 23C - NIL
Hence, would like to know -
1) Any separate procedure to take the credit of upload entries?
2) If the Balance in ED RG 23C A/c is NIL, will it affect on taking credit?
Thanks & Regards,
Reshma

Accounting Effect for Capital Goods Purchase

Hi,
Iam using SAP 8.8 PL 13. How does the accounting takes place in case of an Item marked as Fixed Asset in Item Master?
In GL account determination I have assigned Capital Cenvat Credit A/c. for Capital Goods on Hold A/c.
Suppose I purchase an Fixed Asset Item for Rs.10000/- from a Vendor who has also been assigned Asset A/c in BP Master. I have created separate tax code for capital goods. The tax code is BED 10 %.
In Incoming Excise Invoice I get the Following JE effect.
                                                           Debit               Credit
Capital Cenvat Credit -                      Rs.10
Capital Cenvat on Education Cess    Rs.10
Capital Cenvat Credit                         Rs.5
Capital Cenvat Credit on HS Cess     Rs.5
Capital Cenvat Credit                         Rs.500
Capital Cenvat Credit                         Rs.500
Incoming Cenvat Clearing A/c                                    Rs.1030
Can somebody explain how this works?
Rgds
Kalli
Edited by: Kallicharan Nadar on Aug 30, 2010 11:22 AM

Hi Kalli,
In Administration-> Setup-> Financials-> G/L Account Determination-> Purchaseing Tab-> Tax Sub Tab-> "Capital Goods On Hold Percentage set" - 50 % and set GL in "Capital Goods On Hold Account" once you done these setting. When you are going to make Incoming Excise Invoice transaction that time system is booking 50% excise amount in current year and remaining 50 % will book in next year and same for Cess and ShCess.
Cenvat credit on capital goods is allowed only when it is received in the factory. However, only 50% of the credit may be availed in the financial year when the capital goods are received in the factory and the balance 50% may be availed in any subsequent financial year, provided the capital goods are in the possession of the manufacturer. The Cenvat Credit Rules, 2004, do not impose any condition upon the manufacturer to avail of the credit only when the capital goods are put to use on the commissioning of the plant.
Refer...
http://www.cbec.gov.in/excise/cx-rules-main.htm
Thanks
Sachin

Commercial rounding for capital goods

Commercial rounding off of all duties
All the Duties are rounded up in PO & MIGO with some routing development through ABAP.
Now client requirement is that in case of capital goods
1.     If suppose that in Capital Goods Cenvat is Rs. 45.00, in same year only 50% credit is available hence Rs. 22.50 i.e. after rounding off it is available to us 23.00 and in on hold account only Rs. 22.00 should be available, but present SAP system does not propose the same
2.     If Value of Secondary Education Cess is Rs.1/- for capital goods then credit available in current year should be Rs.1/- & on hold account it should be Zero
Business is saying that it is statutory requirement as per Govt. Notification
How much Govt is firm on this rule & how other companies are achieving this using SAP?
Another Question is that While reversing CENVAT credit taken for capital goods without rejecting material (Only Duty reversal because credit wrongly taken)
We have to pass Excise JV through J1iH & reverse 100 % duty. STD procedure is that   we have to transfer 50 % duty from Hold account to the RG23 C part 2 then reverse 100 % duty
But business is saying that it is wrong practice & against excise law .In this case how to handle CENVAT on Hold Account.
( I have Already used OB90 & routing Number 17 is working fine but not for above case )
Thanks
Edited by: sachin patil on Mar 10, 2009 7:00 AM

Dear sachin ,
As far as I see, there is no loss to the company,
1. you paid the vendor for the full excise amount
2. As a manufacturing unit you are liable to take 100% credit
3. IF you classify the material as capital goods as per your needs then take 50% now and 50% in next financial year
4. If Raw material take 100% credit
5. If the material has been mistakenly classified as C and first 50% credit availed, then to correct your operations you will have to take second 50% from J1IH then in that case you will have to clear all credit on hold from your original 50% credit entry & the J1IH entry, hence you will end up taking 100% credit.
In such conditions you can also opt for credit reversal through J1IH against the said part2 entry, & thenj create a fresh ID declaring material as raw material & take fresh 100% credit.Here also that second 50% from the on hold account would be required to be cleared.
Hope this helps,
Regards,
Akhileshwar K

Excise reversal on Capital goods

I am facing a problem in Excise. The client has taken a wrong credit of asset in a dealers transaction.
MIGo Done
J1iex - Credit taken.
The client wants to reverse the transaction since the credit is taken more. 50% credit has gone to credit on hold.
We tried by reversing the 50% credit using J2I8 & then reverse the 100% credit taken in J1IH (Other Adjustment) & then take the credit in J1IH (Addational Excise) But at time of doing MIRO the Excise amt is the original amount of J1iex & system is not taking the new amt as taken in J1IH (Addational Excise).
Pls suggest how to reverse the original entry of excise & pass the entry for the correct amt of excise & also the same amount should appear at time of doing MIRO (For Capital Goods.)
Kindly revert...

Dear,
The reversal entry done by J2I8 and the adjustment entry done by J1IH would not impact the J1IEX document posted. Hence the MIRO would still be representing the values of the J1IEX posted values. The excise value can be adjusted in the inventory value in the MIRO line item or can be adjusted in the unplanned delivery cost under details tab in MIRO (depending on the sales tax/VAT implications).
Hope it works.

EXCISE ON CAPITAL GOODS

hi
    "for capital items 50% of excise duty is available for credit immediately ,50% in next financial year ,some time credit can be taken in same year IF
1 P O RETURN FOR OF CAPITAL
2 STOCK TRANSFER TO ANOTHER PLANT"
CAN ANY BODY EXPLAIN ME ABOVE SENIRO WITH EXAMPLE
WITH REGARDS
HARDIK
Edited by: hardik_khandelwal on Sep 17, 2010 1:32 PM

Hi,
for capital items 50% of excise duty is available for credit immediately , 50% in next financial year ,some time credit can be taken in same year IF
1 P O RETURN FOR OF CAPITAL
2 STOCK TRANSFER TO ANOTHER PLANT"
During MIGO u2013 Part I Posting
S- Debit     KBS
H-Credit     WRX     PL-Vnd-Mtl
During Excise Posting- Part II
S- Debit     CENVAT OH
S- Debit     CENVAT on CG-SEC
S- Debit     CENVAT on CG-BED
S- Debit S     CENVAT on CG-ECS
H-Credit     PL-Vnd-CENVAT
Transfer of credit for Capital Goods for next year u2013 J2I8
H-Credit     CENVAT OH
S- Debit S     CENVAT on CG-SEC
S- Debit S     CENVAT on CG-BED
S- Debit S     CENVAT on CG-ECS
Then you can send or sell the Asset in current finincial year but before that make sure that it has to retire in FI.

Cenvat on Capital Goods

Hi all,
Whenever credit on capital goods need to be availed, you can claim 50% of credit at the time of receipt by specifying ‘Yes’ in the ‘Claim CENVAT.
Now I want to know that where I have to setup / define the percentage of CENVAT credit the user wants to take immediately on PO receipt of the goods.
regards
Sanjay

Hi
I know the standard scenario for Excise and its related settings. Our system is also working absolutely fine for the 50% Cenvat credit utilization.
But the customer wants to have a process like that of as I had explained earlier.
Can you suggest whether it is possible.
Thanks,
Chaps

Posting of cenvat credit of 50% on capital goods through T.Code:J1IH

Hi
Please advise me the procedure for posting of cenvat credit of 50% on capital goods through T.Code:J1IH.
As a matter of fact, when i tried to post the last year credit of 50% cenvat credit on capital goods the system accepting 50% only.
For example, last year we got Rs.200000 as cenvat credit and out of that 50% credit of Rs.100000 got availed last year. In this year when i tried to avail of remaining of Rs.100000 through transaction code J1IH system is accepting 50% of Rs.100000 i.e only Rs.50000 is accepting.
I look forward for your reply
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 16, 2008 8:54 PM

Hello,
The settings before 01.04.2010 were same. However, after thorough checking of the GL A/cs, I have following observations -
1) Plant 1 - Balance as on 31.03.2010 in Cenvat on Hold A/c -Rs. 195080. It is upload balance & t.code used is FBVB
    There are some more transctions in this A/c which are reversed due to wrong entries.
    Balance in Excise Duty RG 23 C as on 31.03.2010 - NIL
2) Plant 2 - Balance in Cenvat on Hold A/c as on 31.03.2010 is Rs. 166701. Again this is an upload balance with FBVB
    Balance in Excise Duty RG 23 C as on 31.03.2010 - Rs. 56931.62
3) Plant 3 - No upload balance. All the transactions are routed through J1IEX except 1 from FB01
    Balance as on 31.03.2010 - Cenvat On Hold A/c - Rs. 86876.06
                                                 ED RG 23C - NIL
Hence, would like to know -
1) Any separate procedure to take the credit of upload entries?
2) If the Balance in ED RG 23C A/c is NIL, will it affect on taking credit?
Thanks & Regards,
Reshma

VAT availment on Capital Goods

Similar Messages

Maybe you are looking for