Unable to avail credit 50% balance of previous years credit on capital good

Dear All,
Cenvat on Hold :
Unable to avail credit 50% balance of previous years credit on capital goods.
When Capital On-Hold is taken for a year(for vendors) and selected a Vendor and when Transfer Credit is clicked,the error message appears.(TCode - J2I8)
Cannot Reconcile : Crossed Return Date, please Reverse
Message no. 8I582
Pls guide.......
Regards
Sachin

Hi,
The above error message looks to be a strange one in J2I8.
As per the above message, check whether there is any pending subcon-challans due for reversal using J1IFR transaction.
Also check whether you are getting subcon challans in J2I8.
Finally, check whether any SAP notes are available.
Thanks & Regards,

Similar Messages

  • Opening Balance from Previous Year Closing Balances

    HiWe are trying to create multiple year budgets for balances sheets which rely on previous year info for opening balances.Our time dimension has months and year to date as the low level.e.g. TOTAL_YTD Jan_YTDYears are in dimenison scenario.

    Please ignore posted before complete

  • Balance for previous years

    I have the following requirement:
    A user enters a Fiscal Period.  On our report we want to define key figures which show values as follows:
    Our Financial year is from 1st January u2013 31st December with 16 posting periods (K4 variant)
    Fiscal Period: 042007 u2013 entered by user
    1.     Balance for beginning of reporting year and end of previous year
    2.     Balance for beginning of previous year and end of year before previous
    Therefore for the example:
    1.     Balance 01.01.2007 and Balance 31.12.2006
    2.     Balance 01.01.2006 and Balance 31.12.2005
    How can I do this can I offset if so how and if not do I need to write an exit if so how? Thanks

    Hi Varun,
    Which period you want to run the report? Please let us know and also share screen shot.
    Regards
    Mukthar

  • Trying change my credit card info from previously lost credit card but can't since it says I'm accessing from new device and asks for security code for a card i no longer have. What can I do?

    I've recently gotten a new laptop and replaced my damaged iphone. Apparently these 2 scenarios qualify as "new devices". This is fine but I also had lost my credit card previously that was connected to my iTunes account, and got a new one with all different numbers. When I try to change my billing information to this new card it won't let me because it says
    "Your account has been accessed from a new device, and you must verify your payment information before you can make purchases."
    and it asks for the security code of the card I had lost and replaced! I am not able to change my billing info to my new card thus because I can't get past this.
    Can anyone please help?

    Contact iTunes Customer Service and request assistance
    Apple  Support  iTunes Store  Contact Us

  • Availing 50% Capital Goods

    Hi,
    Cenvat on Hold :
    Unable to avail credit 50% balance of previous years credit on capital goods.
    Error message appears-Cenvat reconcile
    How to go with this?
    Will be rewarded.
    Regards

    Hi Santhosh,
    When Capital On-Hold is taken for a year(for vendors) and selected a Vendor and when Transfer Credit is clicked,the error message appears.
    Please find the exact erro message.
    Cannot Reconcile : Crossed Return Date, please Reverse
        Message no. 8I582            
    Regards

  • CENVAT CREDIT 100% TAKEN IN CASE AED ON CAPITAL GOODS INSTEAD OF 50%

    Hi Experts,
    This is with reference to the Cenvat Credit taken on Additional Excise Duty Payable on Capital Goods.
    Presently in SAP 100% Cenvat Credit has been taken into 26010713 CENVT CAP GOOD (CAD)  but as per law 50% Credit should be taken in the same year in which
    Duty has been paid and balance 50% should be taken in next year.
    The same treatment has been taken correctly in excise records.
    And i want to know only for imported there has been any law change regarding 100% credit should be paid in same year.
    Regards,
    Manjax

    Yes, this is std behaviour of the system,as per the law the AED will be allowed to take 100% credit in first finanacial year only.
    For more information refer the below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?quicklink=index&overridelayout=true

  • Capital Goods Transfer of Credit

    Hi
    Our client want to process to pass the manual jv against capital goods through T/code J1IH (under addl.excise & RG23C for only part2). After post the doc, they want to process to post the doc for 50% Capital Hold amt (previous yr.) to Capital Goods amt through  T/code J2I8. But the line was showing as deactivate mode.
    Pls help me how overcome the said problem.
    Regards
    Avijit
    Edited by: Avijit  Barman on Jun 25, 2008 6:28 AM

    Hi Manoj,
    Thanks for your response.
    This is the first time i am using J2I8 T code for transfer of credit.
    The particular SAP note has not been applied so far.
    I will apply the same and if any problem existing, will let you know.
    Thanks
    Regards
    Rifaie.M

  • 50% Credit in VAT for Capital Goods(Assets)

    Dear SAP MM Experts,
               My client need to take 50% VAT credit in the First year and remaining 50% in the next year for Assets(Capital Goods). Currently I have configured 50% Cenvat credit for Excise duty, it was working very well using J1ID.
    But for VAT, what configuration is necessary to take 50% VAT credit for Captial goods(Assets). Right now I use JVCD for taking 100% to VAT and JVCN to make it as inventory(Non Deductible).
    Please do the needful.
    Thank you.
    Regards,
    Baskar

    This is standard behavior of SAP. In case domestic purchase, we can avain 50% CENVAT on additional excise duty (AED).
    But in case of Import , we can avail 100% CENVAT for capital goods on additional customs duty (ADC).
    Understand the difference between ADC & AED.
    Try to convince client for the same. If he is not convinced, better write to SAP. Don't make changes related to subtransaction type 'IP'.

  • Cenvat credit on capital goods.

    Dear all,
    1. There is a rule that the cenvat credit in respect of capital goods shall be allowed for the whole amount of the duty paid on such capital goods in the same financial year if such capital goods are cleared from the factory as such in the same financial year.
    2.The system is designed in such a way that the cenvat credit in respect of capital goods received in a factory or in the premises of the duty paid of output service at any point of time in a given financial year shall be taken only for an amount not exceeding fifty per cent. of the duty paid on such capital goods in the same financial year.
    Please suggest us how to configure the system for the point no :1
    Thanks & Regards,
    A.Anandarajan.

    By standard 50% credit can be taken on first year,If u want to take full credit use transaction J2I8,
    Also refer both links
    SAP MM CIN Settings
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207dd2ad-bf92-2b10-a88b-e3a4a01ca7fc
    Capital Procurement in SAP
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f
    Edited by: Jeyakanthan A on Apr 22, 2010 2:01 PM

  • Date range previous year?

    How would I get all records that are in the previous year from the date the report is run?
    Thanks
    Chris

    Hi Chris,
    Are you doing a current vs previous report?  There are two ways to do this.  One is to have two parameters: one for a start date and one for an end date.  When your users enter the date range, set your Record Selection formula to go back 1 year from the start date. 
    {TABLE.DateField} >= Date (Year ({?StartDate} - 1), Month ({?StartDate}), Day ({?StartDate})) And
    {TABLE.DateField} <= {?StartDate};
    The other suggestion would be to use a subreport to query the previous year's data. 
    Good luck,
    Brian

  • 50% credit on capital goods for previous year is not availed

    Dear All,
    The go-live date for my client was 01.10.2009. Now, in Apr, 2010 when the client is trying to get the 50% credit on Capital Goods (t. Code j2i8),  system is not generating any data of the previous year. (From Oct, 09 to Mar'10).  However, if we see the GL Balace for 'Cenvat On Hold A/c' as on 31.03.2010, it shows a  balance of Rs. 2.50 lakhs approximately.
    Can you please tell me why system is not showing any details through j2i8 for previous year?
    Thanks & Regards,
    Reshma

    Hello,
    The settings before 01.04.2010 were same.  However, after thorough checking of the GL A/cs, I have following observations -
    1) Plant 1 - Balance as on 31.03.2010 in Cenvat on Hold A/c -Rs. 195080. It is upload balance & t.code used is FBVB
        There are some more transctions in this A/c which are  reversed due to wrong entries.
        Balance in Excise Duty RG 23 C as on 31.03.2010 - NIL
    2) Plant 2 - Balance in Cenvat on Hold A/c as on 31.03.2010 is  Rs. 166701. Again this is an upload balance with FBVB
        Balance in Excise Duty RG 23 C as on 31.03.2010 - Rs. 56931.62
    3) Plant 3 -  No upload balance.  All the transactions are routed through J1IEX except 1 from FB01
        Balance as on 31.03.2010 - Cenvat On Hold A/c - Rs. 86876.06
                                                     ED RG 23C  - NIL
    Hence, would like to know -
    1) Any separate procedure to take the credit of upload entries?
    2) If the Balance in ED RG 23C A/c is NIL, will it affect on taking credit?
    Thanks & Regards,
    Reshma

  • I have a 50.00 itunes balance and I am unable to use it.  Why is it requesting credit card info when I try abd purchase music?

    I have a 50.00 itunes balance and I am unable to use it.  Why is it requesting credit card info when I try to purchase music?  I've already redeemed my gift card onto my itunes account, so I no longer have a code. 

    Because your credit card info is how itunes verifies your account.

  • BPS Allocation (BCS) using Debit/Credit (no balance available)

    Hello,
    BPS allocation seams to expect a balance instead of debit credit sign.
    We are using debit and credit sign in Planning (0DB_CR_IND). This seams to be the reason why allocation can not be used in SAP standard. We would need to program an individual allocation program. Is this correct?
    Lets make an example
    Cost Center A
    Credit: 50 Euro
    should be allocated 100% to another cost center B.
    Debit: 0 Euro
    The allocation function would post the following
    Cost Center A
    Credit: -50 Euro
    which is wrong, because the costs would disappear from Cost Center A
    It would be necessary to post
    Cost Center A
    DEBIT: +50 Euro
    Is there any possibility to use SAP standard to allocate with consideration of debit/credit sign?
    If not we would create a temporally key figure, calculate the balance and then distribute with allocation. Afterwards we would post the distributed amounts back to the key figure with consideration of debit/credit sign. But this solution seams to be far away from SAP standard.
    Does anyone have any comments?
    Thanks in advance
    Eckhard Lewin

    Not all things get charged to store credit.
    Even if you lost the cards, iTS can see what you redeemed. Contact them and they can dig around to see what's going on.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Credit card balance

    Trying to figure out if I need to make use of my cards to increase my score. I have the following cards:
    Belk $0 limit $850
    New York n company $0 limit $1100
    Credit One $0 limit $600
    Credit union card $0 limit $500
    Bank credit card $0 limit $500
    Lowes $0 limit $4800 joint account
    The following cards have balances I'm working on paying down to zero!
    Express $547 limit $1300 I went a lil coo coo for my birthday
    Victoria Secret $50 limit $350
    Capital One $500 limit $1500
    Kay Jewlers $460 limit $1300

    Wifey32 wrote:
    Trying to figure out if I need to make use of my cards to increase my score. I have the following cards:
    Belk $0 limit $850 Store card
    New York n company $0 limit $1100 Store card
    Credit One $0 limit $600 If you use it, pay it quickly, but carefully. Or don't use it is probably best.
    Credit union card $0 limit $500 Yes, use
    Bank credit card $0 limit $500 Which bank? Yes, use
    Lowes $0 limit $4800 joint account Store card
    The following cards have balances I'm working on paying down to zero!
    Express $547 limit $1300 I went a lil coo coo for my birthday Store card
    Victoria Secret $50 limit $350 Store card
    Capital One $500 limit $1500 Yes, use
    Kay Jewlers $460 limit $1300 Store card
    The store cards and Credit One should all be paid to zero as soon as you can. These cards all have terrible interest rates, and they encourage you to buy things you might not really need. These can be kept in a sock drawer indefinitely, and only brought out if there is something you absolutely positively cannot do without, or there's a 50% price reduction bonus for using the card.The Credit One can be (should be) closed as soon as you can.When talking about "credit cards" always put the store cards and Credit One is a special place in your commentary, to make sure everyone knows you understand they are not real credit. The real credit cards, you only have three, for a total available credit limit of $2,500. These should be used for regular daily spend, groceries, gasoline, pharmacy, if you have room on the card. Because the available credit is so low, you likely will be getting near the credit limit on each. Be sure to pay the statement balance by the payment due date, and earlier if you are approaching the available $500 or $1,500 limit, depending on the card. The comment about letting only one card report, well, that is for times when you really want to groom your FICO score for some major application, not for every day. For typical months? these card limits are so low it is not much of an issue right now if you let balances report on them. You want to build credit. You do that by reporting balances on the cards you do have, using them, and getting credit limit increases on these three real credit cards. You should check on the Capital One website for your account, to request a Soft Pull Credit Limit Increase. There may or may not be one for this card. If there is, it will grant it immediately. If not, try again after 3 months. You should check at your Credit Union about getting a CLI on that card. If you have any sort of history (ideally you've been using the card and paying in full? It hasn't always been zero? Tell me it hasn't always been zero... please? ) then you may have enough history to get a credit limit increase. Same with the bank credit card. Hopefully it has not been at zero forever? Do you have any late payments of any kind in your history? You should consider applying for the Chase Freedom card. It has quarterly rotating categories of 5% cash back which includes things like groceries, gasoline and restaurants. It is one of the basic no annual fee cards that provides good rewards. If you have not yet, you should try to find your FICO credit score. One place is to pay for it here, to get an accurate reading. From that, you can get a good idea where you stand in your likely credit applications. Are you planning on any purchases such as a car or mortage in the future? Those plans should be considered as you look at your credit history and plan next steps in working with these cards and potentially applying for new credit cards. Finally, before applying for other cards, it's a good ideal to search and ask questions around here to get a better perspective on what is available, benefits and gotchas with any cards (like Credit One gotchas). Good luck!

  • RE What happened to my previous Skype credit?

    I had a previous Skype credit of $17.85. Beside that purchase in my "Purchase History" it now shows "Delivered." What does "Delivered" mean? I know I did not use up all of that $17.85. So did I just lose it? Do Skype credits expire? I thought I read that they "never expire." I have another entry in my "Purchase History" that shows "Refunded." I understand what that means! But "Delivered" doesn't sound like "Refunded" to me. Did I lose the $17.85? 
    Solved!
    Go to Solution.

    Hi,
    I checked your account and saw that you already managed to reactivate your Skype Credit.
    For future reference, the credit balance in your account becomes inactive 180 days after the last chargeable use of your Skype Credit, as set out in our Terms of Use.
    To prevent this, just send an SMS or make a call before the 180 days are up to extend the expiration period (or you can always reactivate it like you did).
    Hope this helps!
    Rod
    If you found this answer helpful, please give Kudos. If it resolved your issue, mark it as a solution to help others. Thanks!

Maybe you are looking for

  • Error message when burning dvd

    I have a flat panel 17" iMac with a superdrive. I have recently tried to back-up data onto a dvd. When I hit the burn button I soon get an error message. When I eject the dvd and put it back in to play nothing happens and the dvd is ejected only when

  • PHP Forums in DW Templates

    I have a client that needs a discussion Forum within its site. I am familiar with phpBB3 and I like it, but it does not integrate into site pages very well. Does anyone know of any other options that could perhaps have the forum pages put into a DW T

  • Glossy vs. Non-Glossy Screen - How can you tell?

    Hi, If someone came to you on the street with a MacBook Pro, how can you tell if he/she had a glossy or non-glossy screen? Is there something in System Preferences or something that tells you directly? Or do you have to tell by just looking? Thanks.

  • I have flash media server but how can i open port 1935

    how would i open Port 1935 on my server as i think this is why my streaming in flash med ia server does not work

  • Ich möchte bei der interaktiven Benachrichtigung auch auf anderen Programmen antworten dürfen z.B Whatsapp

    ich möchte bei der interaktiven Benachrichtigung auch auf anderen Programmen antworten dürfen z.B Whatsapp. Es ist toll, dass es bei Emails, iMessage Kalender usw. funktioniert, wäre aber sehr nützlich wenn es auch freigegeben für andere Programme wä