VAT changes in UK
Hi All,
As there are VAT changes in UK do we know any news from SAP if they are releasing any patch to do this or is there a standard way of doing the config for this.
If so can you please share the same with me i am new to Finance would appreciate if the help is as much detail as possible.
Many Thanks,
Kishore Yerra
>
Karen Smith wrote:
however, why would I not just change the existing percentages on the AR side?
Because your old data won't make any sense. For example current VAT rate is 20%. You post an invoice where the net value is 100 GBP, so the tax will be 20 GBP and the gross 120 GBP. The percentage rate for the VAT won't be saved into the BSEG/BSET lines, only the tax code. If you change the percentage in the tax code (for example to 25%), and you have a look at this invoice, see that the gross value is 120 GBP and will think that the net is 90 GBP and the tax amount is 30 GBP, and if you look at the line items you won't understand...
So, don't change existing tax codes, create new ones!
Similar Messages
-
Hello,
While creating document we charge tax code in addition to the amount:
tax base amount 100
tax 16 %
total amount 116
We do tax return to the tax authorities at the collection status. When the customer pay 116 we transfer 16 to the tax authorities,
Now we face a case of VAT change from 16% to 17%. Therefore I sould collect 17 but in my system the document amount is 116 and not 117.
Is there a way to deal with VAT change?
Thanks,
BenFirst of all please elaborate what is the process that you are following for posting the document ?
In case of miscelleneous chages or addition charges you can always use FPE1 to post the document .
Cheers ,
Dewang -
BBP: Items not taken into BBP after VAT change
Hello,
I am new in FI-CA and I am facing one issue.
1. We changed VAT from 01.01.2011 by creating new VAT code
2. We are using BBP procedure 2 - with 11 due dates
3. In the amount of the BBP were taken only the items from the old VAT code.
The posting items with new VAT code from the billing document were not taken into budget billing plan.
Any advice where to look to find out problem?
Thanks in advance.
Vladohello Amlan,
We have tested these steps
1. The dunning procedure releases as an activity the documents that reach a certain dunning level.
2. The items are submitted to the collection agency using FP03D
3. The users manually recall some of these documents
5. Execute FPCI and like this the recall is included in the file.
If we do the previous everything works fine,but I believe the standard SAP is missing something for cancel release cases, because an inconsisty is being created between SAP and the collection agency. If you are reseting something a notice for the collection agencies would have to be created.
On top of that we cannot exclude recalled items (09) in the selection of FP03D (or FP03DM), because we also have systematic recalls that are done according to the longevity of the documents and according to that longevity placed in different collection agencies.
Do you think this can be reported to SAP as an error? The system in any case should prevent you to do the cancel release if the record is not still in any update file (table dfkkcoli_log) to prevent the inconsistency. Just like the system does not allow you to do the cancel release if the item has not been recall first.
Regards,
Sergio -
VAT Change from 4% to 5%
Dear Gurus,
What are the procedure to change the VAT from 4% to 5% for haryana state.
kindly provide the solution.
Regards
R.RajendranDear Mr JOshi,
Thanks for your reply.
How to create new tax code and map into condition record.
Please provide the solution.
Thanks in advance,
Rajendran R -
VAT changed on MRP in some states /Chaged on Selling Price in some States
Hi All,
Client want to charge VAT on Selling Price and in some states on MRP.
I have created one Condition type ZMRP for the Material MRP price.
In the normal scenario VAT will be chaged on the Selling Price:
Selling Price Is the combined Value of
Price - discount= Net price
Selling Price = Net Price EDEcess+Hcess
Total value =Selling Price + VAT
I want to write a Code for the VAT condition type.
For Example:
If system found that the sales order is creatd for the The States Like Bihar,UP,MP,WB is then the VAT will be charged on the ZMRP price of the Matrial.
But my problem is that there is not any separate Condition type for the Selling Price bcos it will come automatically in the Pricing.
Please sugest the programe name and and logic to write the code so that I can fulfil client requirment.
Thaks In advance.
Regards
VenkatHi Laksmipathy,
As per the Client requirment ED,Cess and Hcess will m=not be charged on the MRP price.
Incase of VAT on selling price
MRP 110
Base 100
Dis 10% 10
Net 90
ED 10% 9
Base+ED 99
Cess 2% 0.2
Hcess 1% 0.1
BaseEDCESS+HCESS 101.1
VAT 5% 5.055
Total 106.155 (Price to stockist)
Incase of VAT on MRP price
MRP 110
Base 100
Dis 10% 10
Net 90
ED 10% 9
Base+ED 99
Cess 2% 0.2
Hcess 1% 0.1
BaseEDCESS+HCESS = 101.1
VAT will charged on the MRP with the Formula [ 110/110+5%(Rate of VAT) X100]=95.7
On this 95.5 Back ward Calculation of ( EDCessHCess) getting from the Base prices= 95.790.20.1=105(Price to stockist)
Please suggest how to can I do it.
Regards
Venkat -
How will the VAT change in January affect my bill?
Hi everyone
As you may know the VAT rate increased to 20% on the 4th of January 2011. I’m sure many of you will be wondering how this may affect your bill, so we have some FAQ's for you on BT.com - find out more by visiting www.bt.com/vat
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.Here are two threads to look at:
The end of DPS Single Edition
What is going on with DPS?
Single Edition, SE, apps are available to CC members until 1 May 2015. These apps will remain on the App store but will be unable to be updated after 1 May 2015. That means they will not run on any new version of iOS.
There is now one DPS license. Pricing is done on a per client basis. Click the request for consultation link in Digital Publishing Suite Help | DPS pricing options to receive a price estimate for your projects.
The alternatives to using DPS are using a competing product (outlined in the threads above), using a tool such as PhoneGap (html5, css, javascript hybrid app) or Appcelerator Titanium (native development), learn/hire/contract a developer for native development, and fixed-layout epub.
Others have suggested partnering with someone who was a top tier license to continue to keep your apps current. -
Overcharge on fixed charges (vat change problem?)
My BT bill is 15th Feb, and has a higher than expected fixed charge. These are in advance, and they have to apportion and charge the extra VAT from Jan 1st; however, that isn't much. The bill is complicated by their method, and I asked them to explain the increase. I complained, and although I asked for email, I got a phone call; a foreigner difficult to understand fully. The gist seemed to be that their new accounts package has charged me an extra 6 weeks rental, which is a one-off and won't happen again! After discussion, he is giving me an immediate £20 credit, and a month's free rental. I said that I wasn't really satisfied without a proper explanation, but acceped it provisionally. They're not going to correct the bill. What on earth is going on?
Interesting point about charges being rounded up, it's the same with calls.
The other point that caught my eye was the merging of accounts. I moved away from BT for calls a few years ago but kept broadband with them. Last month I decided to return to BT (Big mistake but that's another story)
When I arranged to return I was told it would all be on my existing account. Then I got a paper bill for 3 months in advance, with all the added charges for non monthly, paper billing etc. Was then told; No we cannot merge them, you will have to go on line and register. (again)
At every turn I have found staff apologising profusely, yet I don't get what I was offered, and they can't provide explanations, all UK and India staff just follow a script that blames "the system".
10 days and still waiting for the service I contracted for.
Wondering what went wrong with human communication? -
VAT rate change - need to pick prevailing rate in billing document for reba
Hello,
Can someone help on the below following requirement?
We are calculating vendor rebates through settlement run. As you are aware, there was a VAT change in UK from 17.5 % to 15% and back to 17.5%.
Now in the vendor billing documents (debit notes) we always wanted the current tax rate, whereas the system populates 2 lines one for old tax rate (becuase few PO's were created when the rate was 15%) and the other for the new tax rate (because one-time discount was offered during new tax rate).
Is there any standard functionality or do we need to deploy any user-exits
(the pricing date in codition type for tax has various dates to choose from ex: Order date, service rendered date, billing date and pricing date) but then looks like this is for sales cycle.
In a nutshell, the requirement is to always post current tax rate irrespective of what the tax rate was when the business transaction (PO/GR/IR) happened.
Thanks in advance,
SubbuAny replies please?
-
VAT charge changes to be applied on 28-7-14 on, wh...
With credits bought before 28-7-14, will the calls after 28-7-14 be charged VAT again?
Hello
The introduction of new VAT regulations has necessitated the upcoming change.
Skype will ensure that users retain the same value they previously purchased Skype credits for during the upcoming VAT changes. Our systems will only charge you VAT once.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
Hi,
We are trying to implement the legal VAT change for Italy.
My customer wants to choose self billing as against tax integration. I found note 1454009 which deals with the same.
I also found an user manual attached to the note.
When I looked in the example for the user procedure provided by SAP in the user manual, i found there was only one document was posted for both input vat and output vat ie both were posted in the same document.
But my client suggests two different documents would need to be posted for the transaction- one for input vat and the other for output vat.
My question would only a single document be posted in both self billing or tax integration.
As mentioned earlier we would like to choose self billing .If we choose self billing would we get the reports required even if only a single document is posted.
Thanks and Regards,
andgHi
Good morning and greetings,
I am not sure whether the following would meet your requirement...Please go through the same
http://help.sap.com/saphelp_erp2005vp/helpdata/en/86/51d9382c378319e10000000a114084/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan -
Dear All
In our company Following TAXINJ
MG > Sales and Distribution > Basic Functions > Pricing > Pricing Control > Define Condition Types > Maintain Condition Types (V/06)
V/06 u2013 JIN6 copy of JIN2 (A/R VAT Payable) & change condition category to u2018Du2019
V/06 u2013 JIN7 copy of JIN4 (A/R CST Payable VAT) & change condition category to u2018Du2019
V/06 u2013 JIN8 copy of JIN5 (A/R CST Surch.Pay VAT) & change condition category to u2018Du2019
OBQ1 - JIN6 copy of JIN2 (A/R VAT Payable)
OBQ1 - JIN7 copy of JIN4 (A/R CST Payable VAT)
OBQ1 - JIN8 copy of JIN5 (A/R CST Surch.Pay VAT)
The above steps configured
next what will we do?
Thanks and Regards
SureshDear suresh
Go to FTXP, input country of origin and execute. There give some two alpha value in tax Code and execute. Give the required details like 2% CST, 4% LST etc., in the description field and [input A in Tax type] and click the green tick at the bottom.
Now you will see a screen where you need to define the required percentage against the respective Condition type and save. Make a note of the tax code.
Now go to VK11, input UTXJ, select the combination of Country / Plant / Plant Region / Region (ship to party) / Tax ClCust / Tax ClMat and execute. There maintain the above tax codes and save.
Now create a sale order and see in condition tab whether based on ship to party region code, the respective tax is flowing.
thanks
G. Lakshmipathi -
Hello! Help please...
Only some items have got RVAT record in pnsc_price_cost_hist table for the Retail VAT mass change
Have created a VAT rate change (for Cost and Retail) for items under dept = 1010/1060 and class = 1 which has 324 items totally.
however, by looking at the pnsc_price_cost_hist table, the number of records for each location is different. It seems that pos_mods can't be generated correctly base on the VAT change.
Thanks!Hi,
As i understood from your question, You have changed the Validity periods in your VK11 records.
Since your contract Line Item Pricing date is already set (Line Item Sales A tab), you will not be able to pick the relevant pricing by UPDATE PRICE option in condition tab. (Because price is picked based on the pricing date in the line item)
Try this method;
Use transaction MASS, to update all Pricing Dates in contract line items to a particular date within new validity period.
Once you update your pricing date in the contract line item, system will automatically carry's the new pricing, resulting new pricing in the line item.
Hope this is useful to you !
Best regards,
Anupa -
Required replace BSEG with BSAK BSIK BSIS BSAS for report performance
Hi Experts
i m optimizing a report in which data is extracting from BSEG , 5 time so i reduses the performance of report
so i want replace BSEG with BSAK BSIK BSIS BSAS for the same data what I am getting now . this is report of Purchase of item. code is here.
REPORT zmm_pur_reg_kanhe LINE-SIZE 1023.
*& Des :Purchase Tax Register Report for KANHE
*& Created on :12-07-07
*& Suggested by:Paresh Saini(MM)
*& Changes By: Lailu Philip
*& Changed On: 24.09.2007
*& Changes: New columns for G/L Code Description,VAT Amt,VAT Perc,CST Perc
*& ,SHCESS Amounts,WCT G/L Acc., WCT Amt,Tax Code
*& for Purchase Order,WCT tax code & Percentage.
*& Request No: S6DK921577
Data Declaration
*& changes: by Vincy on 12.01.2007
*& changes: display purchase order with vendor type zpsr(get_zpsr)
*& Request No: S6DK930821
TABLES:ekbe, lfa1, faglflexa.",j_1iexcdtl,lfa1,bkpf,bseg.
TYPE-POOLS: slis. "ALV Declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
DATA: it_sortcat TYPE slis_sortinfo_alv OCCURS 1,
col_pos LIKE fieldcatalog-col_pos .
TYPES :BEGIN OF wa1_ekbe,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
menge TYPE ekbe-menge,
matnr TYPE ekbe-matnr,
ebelp TYPE j_1iexcdtl-ritem1,
ebeln TYPE ekbe-ebeln,
gjahr TYPE ekbe-gjahr,
lfbnr TYPE ekbe-lfbnr,
lfpos TYPE ekbe-lfpos,
bldat TYPE ekbe-bldat,
REEWR TYPE REEWR,
END OF wa1_ekbe.
TYPES :BEGIN OF wa2_ekbe,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
menge TYPE ekbe-menge,
ebelp TYPE ekbe-ebelp,
ebeln TYPE ekbe-ebeln,
gjahr TYPE ekbe-gjahr,
lfbnr TYPE ekbe-lfbnr,
lfpos TYPE ekbe-lfpos,
bldat TYPE ekbe-bldat,
REEWR TYPE REEWR,
awkey(20) TYPE c,
MATNR TYPE MATNR,
MWSKZ TYPE EKBE-MWSKZ,
END OF wa2_ekbe.
TYPES :BEGIN OF wa1_j_1iexcdtl,
exnum TYPE j_1iexcdtl-exnum,
exdat TYPE j_1iexcdtl-exdat,
lifnr TYPE j_1iexcdtl-lifnr,
matnr TYPE j_1iexcdtl-matnr ,
maktx TYPE j_1iexcdtl-maktx ,
capind TYPE j_1iexcdtl-capind,
exbas TYPE j_1iexcdtl-exbas,
exbed TYPE j_1iexcdtl-exbed,
ecs TYPE j_1iexcdtl-ecs,
werks TYPE j_1iexcdtl-werks,
ritem1 TYPE j_1iexcdtl-ritem1,
rdoc1 TYPE j_1iexcdtl-rdoc1,
docyr TYPE j_1iexcdtl-docyr,
bedinv type J_1IBEDINV,
ecsinv type J_1IECSINV,
EXADDINV1 type J_1IEXADDINV1,
exaddtax1 TYPE j_1iexcdtl-exaddtax1,
rdoc2 TYPE j_1iexcdtl-rdoc2,
ritem2 TYPE j_1iexcdtl-ritem2,
menge TYPE j_1iexcdtl-menge,
ADDED FOR RUDRAPUR ON 08.03.2008 BY ASHOK.CH
*ENDED ON 08.02.2008
END OF wa1_j_1iexcdtl.
TYPES :BEGIN OF wa1_lfa1,
name1 TYPE lfa1-name1,
ktokk TYPE lfa1-ktokk,
werks TYPE lfa1-werks,
lifnr TYPE lfa1-lifnr,
END OF wa1_lfa1.
TYPES :BEGIN OF wa1_ekexclf,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
menge TYPE ekbe-menge,
ebelp TYPE ekbe-ebelp,
ebeln TYPE ekbe-ebeln,
gjahr TYPE ekbe-gjahr,
awkey(20) TYPE c,
exnum TYPE j_1iexcdtl-exnum,
exdat TYPE j_1iexcdtl-exdat,
lifnr TYPE j_1iexcdtl-lifnr,
matnr TYPE j_1iexcdtl-matnr ,
maktx TYPE j_1iexcdtl-maktx ,
capind TYPE j_1iexcdtl-capind,
exbas TYPE j_1iexcdtl-exbas,
exbed TYPE j_1iexcdtl-exbed,
ecs TYPE j_1iexcdtl-ecs,
werks TYPE j_1iexcdtl-werks,
ritem1 TYPE j_1iexcdtl-ritem1,
rdoc1 TYPE j_1iexcdtl-rdoc1,
docyr TYPE j_1iexcdtl-docyr,
name1 TYPE lfa1-name1,
ktokk TYPE lfa1-ktokk,
exaddtax1 TYPE j_1iexcdtl-exaddtax1,
added for rudrapur on 08.03.2008 by ASHOK.CH
bedinv type J_1IBEDINV,
ecsinv type J_1IECSINV,
EXADDINV1 type J_1IEXADDINV1,
END OF MODIFICATION ON 08.02.2008
END OF wa1_ekexclf.
TYPES :BEGIN OF wa1_bkpf,
bukrs TYPE bkpf-bukrs,
belnr TYPE bkpf-belnr,
gjahr TYPE bkpf-gjahr,
budat TYPE bkpf-budat,
tcode TYPE bkpf-tcode,
awkey TYPE bkpf-awkey,
END OF wa1_bkpf.
TYPES :BEGIN OF wa1_bseg,
bukrs TYPE bseg-bukrs,
belnr TYPE bseg-belnr,
gjahr TYPE bseg-gjahr,
buzei TYPE bseg-buzei,
bschl TYPE bseg-bschl,
fwbas TYPE bseg-fwbas ,
pswbt TYPE bseg-pswbt,
hkont TYPE bseg-hkont,
wrbtr TYPE bseg-wrbtr,
ktosl TYPE bseg-ktosl,
koart TYPE bseg-koart,
shkzg TYPE bseg-shkzg,
mwskz TYPE bseg-mwskz,
qsskz TYPE bsis-qsskz,
dmbtr TYPE bseg-dmbtr,
lifnr TYPE bseg-lifnr,
matnr TYPE bseg-matnr,
flag TYPE C,
flag_21 TYPE C,
END OF wa1_bseg.
TYPES :BEGIN OF wa1_tax,
belnr TYPE bseg-belnr,
fi_docno TYPE bseg-belnr,
gjahr TYPE bseg-gjahr,
bukrs TYPE bseg-bukrs,
awkey TYPE bkpf-awkey,
fwbas TYPE bseg-fwbas ,
cst_amt TYPE bseg-pswbt,
vat_amt TYPE bseg-pswbt,
shcess_amt TYPE bseg-pswbt,
gl_accnt TYPE bseg-hkont,
gl_desc TYPE skat-txt50,
wctglacc TYPE bseg-hkont,
wctamt TYPE bseg-dmbtr,
taxcode TYPE t059z-wt_withcd,
taxperc TYPE t059z-qsatz,
total_value TYPE bseg-wrbtr,
set_off TYPE bseg-wrbtr,
cond_type TYPE konv-kschl,
description(20) TYPE c,
service_tax TYPE bseg-wrbtr,
service_ecess TYPE bseg-wrbtr,
service_shcess TYPE bseg-wrbtr, "vincy on 31.01.08
ebelp TYPE ekbe-ebelp, " on 15.04.08
flag TYPE c,
mwskz TYPE bseg-mwskz,
END OF wa1_tax.
DATA:BEGIN OF itab_skat,
saknr TYPE skat-saknr,
spras TYPE skat-spras,
txt50 TYPE skat-txt50,
END OF itab_skat.
DATA: iskat LIKE itab_skat OCCURS 0,
wa_skat LIKE itab_skat.
DATA : BEGIN OF zbsis OCCURS 0,
bukrs TYPE bsis-bukrs,
hkont TYPE bsis-hkont,
augdt TYPE bsis-augdt,
augbl TYPE bsis-augbl,
zuonr TYPE bsis-zuonr,
gjahr TYPE bsis-gjahr,
belnr TYPE bsis-belnr,
buzei TYPE bsis-buzei,
budat TYPE bsis-budat,
qsskz TYPE bsis-qsskz,
END OF zbsis.
DATA: BEGIN OF zt059z OCCURS 0,
land1 TYPE t059z-land1,
witht TYPE t059z-witht,
wt_withcd TYPE t059z-wt_withcd,
qscod TYPE t059z-qscod,
qsatz TYPE t059z-qsatz,
hkont TYPE bsis-hkont,
belnr TYPE bsis-belnr,
END OF zt059z.
DATA: BEGIN OF it_faglflexa OCCURS 0, "added by vincy
ryear TYPE faglflexa-ryear,
docnr TYPE faglflexa-docnr,
rldnr TYPE faglflexa-rldnr,
rbukrs TYPE faglflexa-rbukrs,
docln TYPE faglflexa-docln,
prctr TYPE faglflexa-prctr,
END OF it_faglflexa.
Final Table***
TYPES :BEGIN OF wa1_final,
belnr TYPE ekbe-belnr,
fi_docno TYPE bseg-belnr,
budat TYPE ekbe-budat,
menge TYPE ekbe-menge,
rate TYPE konv-kbetr,
ebelp TYPE ekbe-ebelp,
ebeln TYPE ekbe-ebeln,
mwskz TYPE bseg-mwskz,
gjahr TYPE ekbe-gjahr,
awkey(20) TYPE c,
exnum TYPE j_1iexcdtl-exnum,
exdat TYPE j_1iexcdtl-exdat,
lifnr TYPE j_1iexcdtl-lifnr,
matnr TYPE j_1iexcdtl-matnr ,
maktx TYPE j_1iexcdtl-maktx ,
capind TYPE string,
exbas TYPE j_1iexcdtl-exbas,
exbed TYPE j_1iexcdtl-exbed,
ecs TYPE j_1iexcdtl-ecs,
werks TYPE j_1iexcdtl-werks,
ritem1 TYPE j_1iexcdtl-ritem1,
rdoc1 TYPE j_1iexcdtl-rdoc1,
docyr TYPE j_1iexcdtl-docyr,
name1 TYPE lfa1-name1,
ktokk TYPE lfa1-ktokk,
fwbas TYPE bseg-fwbas ,
vat_per TYPE konv-kbetr,
vat_amt TYPE bseg-pswbt,
cst_per TYPE konv-kbetr,
cst_amt TYPE bseg-pswbt,
shcess_amt TYPE bseg-pswbt,
gl_accnt TYPE bseg-hkont,
gl_desc TYPE skat-txt50,
wctglacc TYPE bseg-hkont,
wctamt TYPE bseg-dmbtr,
taxcode TYPE t059z-wt_withcd,
taxperc TYPE t059z-qsatz,
total_value TYPE bseg-wrbtr,
total_value1 TYPE bseg-wrbtr,
excise_tax TYPE bseg-wrbtr,
excise TYPE bseg-wrbtr,
set_off TYPE bseg-wrbtr,
inventorised TYPE konv-kawrt,
cond_type TYPE konv-kschl,
cond_type2 TYPE konv-kschl,
description(20) TYPE c,
service_tax TYPE bseg-wrbtr,
service_ecess TYPE bseg-wrbtr,
service_shcess TYPE bseg-wrbtr, "vincy on 31.01.08
END OF wa1_final.
DATA :it2_ekbe TYPE TABLE OF wa1_ekbe WITH HEADER LINE,
it_ekbe TYPE TABLE OF wa1_ekbe WITH HEADER LINE,
it1_ekbe TYPE TABLE OF wa2_ekbe WITH HEADER LINE WITH KEY ebelp ebeln,
it_j_1iexcdtl TYPE TABLE OF wa1_j_1iexcdtl WITH HEADER LINE WITH KEY rdoc1 ritem1,
it_lfa1 TYPE TABLE OF wa1_lfa1 WITH HEADER LINE WITH KEY lifnr,
it_lfa2 TYPE TABLE OF wa1_lfa1 WITH HEADER LINE WITH KEY lifnr,
it_bkpf TYPE TABLE OF wa1_bkpf WITH HEADER LINE,
it_bseg TYPE TABLE OF wa1_bseg WITH HEADER LINE WITH KEY
bukrs belnr gjahr ktosl shkzg koart,
it1_bseg TYPE TABLE OF wa1_bseg WITH HEADER LINE WITH KEY
bukrs belnr gjahr ktosl shkzg koart,
it_tax TYPE TABLE OF wa1_tax WITH HEADER LINE WITH KEY awkey ,
it_ekexclf TYPE TABLE OF wa1_ekexclf WITH HEADER LINE,
it_final TYPE TABLE OF wa1_final WITH HEADER LINE,
it_final1 TYPE TABLE OF wa1_final WITH HEADER LINE, "vincy
wa_ekbe TYPE wa1_ekbe,
wa1_ekbe TYPE wa2_ekbe,
wa_j_1iexcdtl TYPE wa1_j_1iexcdtl,
wa_lfa1 TYPE wa1_lfa1,
wa_lfa2 TYPE wa1_lfa1,
wa_bkpf TYPE wa1_bkpf,
wa_bseg TYPE wa1_bseg,
wa_tax TYPE wa1_tax,
wa_ekexclf TYPE wa1_ekexclf,
PLANT TYPE WERKS_D,
wa_final TYPE wa1_final.
DATA: it_konv TYPE konv OCCURS 0 WITH HEADER LINE ,
wa_konv TYPE konv,
invent TYPE p DECIMALS 4,
invent1 TYPE konv-kawrt.
DATA:d1 TYPE konv-kposn,
d2 TYPE ekbe-ebelp.
DATA: v_belnr TYPE ekbe-belnr,
v_gjahr TYPE ekbe-gjahr,
v_awkey(20) TYPE c,
idx TYPE sy-tabix.
**********by vincy on 12.01.07***********
DATA: BEGIN OF it_ekko OCCURS 0,
ebeln LIKE ekko-ebeln,
bukrs LIKE ekko-bukrs,
bsart LIKE ekko-bsart,
lifnr LIKE ekko-lifnr,
belnr LIKE ekbe-belnr,
END OF it_ekko.
DATA: BEGIN OF it_ekpo OCCURS 0,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
txz01 LIKE ekpo-txz01,
END OF it_ekpo.
DATA: BEGIN OF it_lfa1v OCCURS 0,
lifnr LIKE lfa1-lifnr,
name1 LIKE lfa1-name1,
END OF it_lfa1v.
DATA: BEGIN OF s_prctr OCCURS 0,
low LIKE faglflexa-prctr,
END OF s_prctr.
DATA: it_bsegv TYPE TABLE OF wa1_bseg WITH HEADER LINE.
DATA: it_konv1 LIKE konv OCCURS 0 WITH HEADER LINE.
DATA:cnt TYPE i,
awkey1(250).
DATA: LIFNR TYPE LIFNR,
NAME TYPE NAME1_GP,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKTX,
TAX_TOT TYPE KWERT.
***********end of changes by vincy ************
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_werks1 FOR ekbe-werks,
s_budat1 FOR ekbe-budat,
s_fiscal FOR ekbe-gjahr,
s_lifnr FOR lfa1-lifnr.
SELECTION-SCREEN END OF BLOCK b1.
**"changes being by nahid on 16.04.2008
PARAMETERS : excel AS CHECKBOX DEFAULT 'X'.
PARAMETERS: infile LIKE rlgrap-filename.
DATA : zfile TYPE string.
**"changes ended by nahid on 16.04.2008
AT SELECTION-SCREEN.
IF s_werks1 IS INITIAL.
MESSAGE 'Please Enter Plant details' TYPE 'E'.
ENDIF.
IF s_budat1 IS INITIAL.
MESSAGE 'Please Enter Posting date' TYPE 'E'.
ENDIF.
IF s_fiscal IS INITIAL.
MESSAGE 'Please Enter Fiscal Year' TYPE 'E'.
ENDIF.
*start change by nahid on 16.4.08
AT SELECTION-SCREEN ON VALUE-REQUEST FOR infile.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
CHANGING
file_name = infile
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
zfile = infile.
*end change by nahid on 16.4.08
START-OF-SELECTION.
plant = s_werks1-low.
MODIFIED FOR RUDRAPUR BY ASHOK.CH ON 13.03.2008
IF PLANT NE 'RD01'.
PERFORM get_data.
PERFORM get_zpsr. "vincy
ENDIF.
IF PLANT EQ 'RD01'.
PERFORM get_data1.
ENDIF.
*END OF MODIFICATION ON 13.03.2008
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*start chng by nahid on 16.4.08
IF excel = 'X'.
IF NOT infile IS INITIAL.
PERFORM excel_data.
ELSE.
MESSAGE e000(0) WITH 'Please Enter the File Path'.
ENDIF.
ENDIF.
*end by nahid on 16.4.08
*& Form get_data
FORM get_data .
SELECT belnr budat menge matnr ebelp ebeln gjahr lfbnr lfpos bldat REEWR FROM ekbe INTO
TABLE it_ekbe
WHERE werks IN s_werks1 AND
(bewtp EQ 'Q' OR bewtp EQ 'N') AND
bewtp IN ('Q' , 'N') AND "added N by vincy on 6.07.2008
budat IN s_budat1 AND
gjahr IN s_fiscal .
IF sy-subrc = 0. "for 1st ekbe
IF it_ekbe[] IS NOT INITIAL.
SELECT exnum exdat lifnr matnr maktx capind exbas exbed ecs werks
ritem1 rdoc1 docyr bedinv ecsinv EXADDINV1 exaddtax1 rdoc2 ritem2 menge
FROM j_1iexcdtl INTO TABLE it_j_1iexcdtl FOR ALL ENTRIES IN it_ekbe
WHERE rdoc1 = it_ekbe-ebeln
AND ritem1 = it_ekbe-ebelp AND
lifnr IN s_lifnr.
ENDIF.
IF it_j_1iexcdtl[] IS NOT INITIAL.
SELECT name1 ktokk werks lifnr FROM lfa1 INTO
TABLE it_lfa1 FOR ALL ENTRIES IN it_j_1iexcdtl
WHERE lifnr = it_j_1iexcdtl-lifnr.
ENDIF.
LOOP AT it_ekbe INTO wa_ekbe.
wa1_ekbe-belnr = wa_ekbe-belnr.
wa1_ekbe-budat = wa_ekbe-budat.
wa1_ekbe-menge = wa_ekbe-menge.
wa1_ekbe-ebelp = wa_ekbe-ebelp.
wa1_ekbe-ebeln = wa_ekbe-ebeln.
wa1_ekbe-gjahr = wa_ekbe-gjahr.
wa1_ekbe-matnr = wa_ekbe-matnr.
wa1_ekbe-lfbnr = wa_ekbe-lfbnr.
wa1_ekbe-lfpos = wa_ekbe-lfpos.
wa1_ekbe-bldat = wa_ekbe-bldat.
v_belnr = wa_ekbe-belnr.
v_gjahr = wa_ekbe-gjahr.
CONCATENATE v_belnr v_gjahr INTO v_awkey.
wa1_ekbe-awkey = v_awkey.
APPEND wa1_ekbe TO it1_ekbe.
CLEAR :wa_ekbe.
ENDLOOP.
************changes by vincy on 29.05.08 for 'FB08' and 'FB60'**************
LOOP AT s_werks1.
IF s_werks1-low = 'KN01'.
s_prctr-low = 'MUKNHSTM'.
ELSEIF
s_werks1-low = 'NS01'.
s_prctr-low = 'MUNSKSTM'.
ELSEIF
s_werks1-low = 'RD01'.
s_prctr-low = 'MURDPSTM'.
ENDIF.
APPEND s_prctr.
ENDLOOP.
SELECT bukrs belnr gjahr budat tcode awkey FROM bkpf INTO TABLE it_bkpf
WHERE bukrs = 'MU51' AND
gjahr IN s_fiscal AND
budat IN s_budat1 AND
( tcode = 'FB60' OR tcode = 'FB08' ).
IF it_bkpf[] IS NOT INITIAL.
SELECT ryear docnr rldnr rbukrs docln prctr FROM faglflexa INTO TABLE it_faglflexa
FOR ALL ENTRIES IN it_bkpf WHERE rbukrs = 'MU51' AND
ryear = it_bkpf-gjahr AND
docnr = it_bkpf-belnr.
ENDIF.
LOOP AT it_faglflexa.
READ TABLE s_prctr WITH KEY low = it_faglflexa-prctr.
IF sy-subrc <> 0.
DELETE it_faglflexa.
ENDIF.
CLEAR: it_faglflexa, s_prctr.
ENDLOOP.
**************************end of change*************************************
IF it1_ekbe[] IS NOT INITIAL.
SELECT bukrs belnr gjahr budat tcode awkey FROM bkpf APPENDING
TABLE it_bkpf FOR ALL ENTRIES IN it1_ekbe
WHERE bukrs = 'MU51' AND
gjahr IN s_fiscal AND
awkey = it1_ekbe-awkey.
ENDIF.
IF sy-subrc = 0. "bkpf
IF it_bkpf[] IS NOT INITIAL.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr matnr
FROM bseg INTO TABLE it1_bseg FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-belnr AND
gjahr = it_bkpf-gjahr AND
bukrs = it_bkpf-bukrs AND
( bschl = '21' ) AND
lifnr IN s_lifnr. "added 21 for miro cancelation
IF it1_bseg[] IS NOT INITIAL.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr matnr
FROM bseg INTO TABLE it_bseg FOR ALL ENTRIES IN it1_bseg
WHERE belnr = it1_bseg-belnr AND
gjahr = it1_bseg-gjahr AND "changed it_bkpf to it1_bseg
bukrs = it1_bseg-bukrs .
LOOP AT it_bseg.
it_bseg-wrbtr = it_bseg-wrbtr * -1.
it_bseg-fwbas = it_bseg-fwbas * -1.
it_bseg-pswbt = it_bseg-pswbt * -1.
it_bseg-flag_21 = 'X'.
MODIFY it_bseg.
CLEAR it_bseg.
ENDLOOP.
SELECT name1 ktokk werks lifnr FROM lfa1 INTO
TABLE it_lfa2 FOR ALL ENTRIES IN it1_bseg
WHERE lifnr = it1_bseg-lifnr.
ENDIF.
REFRESH it1_bseg.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr matnr
FROM bseg INTO TABLE it1_bseg FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-belnr AND
gjahr = it_bkpf-gjahr AND
bukrs = it_bkpf-bukrs AND
( bschl = '31' ) AND "added bschl and lifnr by vincy
lifnr IN s_lifnr.
IF it1_bseg[] IS NOT INITIAL.
SELECT name1 ktokk werks lifnr FROM lfa1 APPENDING
TABLE it_lfa2 FOR ALL ENTRIES IN it1_bseg
WHERE lifnr = it1_bseg-lifnr.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr matnr
FROM bseg APPENDING TABLE it_bseg FOR ALL ENTRIES IN it1_bseg
WHERE belnr = it1_bseg-belnr AND
gjahr = it1_bseg-gjahr AND "changed it_bkpf to it1_bseg
bukrs = it1_bseg-bukrs AND
bschl <> '35'. "added bschl to avoid vendor paymnt
ENDIF.
SELECT bukrs belnr gjahr buzei bschl fwbas pswbt hkont wrbtr ktosl koart shkzg mwskz qsskz dmbtr lifnr
FROM bseg APPENDING CORRESPONDING FIELDS OF TABLE it_bseg
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-belnr AND
gjahr = it_bkpf-gjahr AND
lifnr IN s_lifnr AND
bukrs = it_bkpf-bukrs AND qsskz IN ('WI', 'WJ').
ENDIF.
ENDIF.
SORT it_bseg BY belnr buzei.
IF NOT it_bseg[] IS INITIAL.
SELECT saknr spras txt50 FROM skat
INTO TABLE iskat
FOR ALL ENTRIES IN it_bseg
WHERE saknr = it_bseg-hkont AND spras = 'EN'.
SELECT bukrs hkont augdt augbl zuonr gjahr belnr buzei budat qsskz FROM bsis
INTO TABLE zbsis
FOR ALL ENTRIES IN it_bseg
WHERE bukrs = 'MU51' AND hkont = it_bseg-hkont
AND belnr = it_bseg-belnr AND gjahr = s_fiscal
AND budat IN s_budat1.
ENDIF.
LOOP AT it_bseg.
READ TABLE zbsis WITH KEY hkont = it_bseg-hkont.
IF sy-subrc = 0.
it_bseg-qsskz = zbsis-qsskz.
MODIFY it_bseg.
ENDIF.
CLEAR: it_bseg,zbsis.
ENDLOOP.
LOOP AT zt059z.
LOOP AT it_bseg WHERE qsskz = zt059z-wt_withcd.
zt059z-hkont = it_bseg-hkont.
zt059z-belnr = it_bseg-belnr.
MODIFY zt059z.
CLEAR: it_bseg,zt059z.
ENDLOOP.
ENDLOOP.
CLEAR: wa_bkpf.
*******Filling Wa.
LOOP AT it_bkpf INTO wa_bkpf. "changes by vincy on 14.04.2008
LOOP AT it1_ekbe INTO wa1_ekbe .
READ TABLE it_bkpf INTO wa_bkpf
WITH KEY awkey = wa1_ekbe-awkey.
wa_tax-belnr = wa_bkpf-belnr.
wa_tax-gjahr = wa_bkpf-gjahr.
wa_tax-bukrs = wa_bkpf-bukrs.
wa_tax-awkey = wa_bkpf-awkey.
wa_tax-ebelp = wa1_ekbe-ebelp.
CLEAR: wa_bseg,wa_skat.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr INTO wa_bseg.
IF sy-subrc = 0.
wa_tax-fi_docno = wa_bseg-belnr.
wa_tax-mwskz = wa_bseg-mwskz.
CLEAR: wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'JP4' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-gl_accnt = wa_bseg-hkont.
READ TABLE iskat INTO wa_skat WITH KEY saknr = wa_bseg-hkont.
IF sy-subrc = 0.
wa_tax-gl_desc = wa_skat-txt50.
ENDIF.
wa_tax-set_off = wa_bseg-wrbtr.
wa_tax-fwbas = wa_bseg-fwbas.
wa_tax-cst_amt = wa_bseg-pswbt.
wa_tax-description = 'CST CG Sett off'.
wa_tax-cond_type = 'JVCS'.
ENDIF.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'VS1' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-fwbas = wa_bseg-fwbas.
ENDIF.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'JP7' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-gl_accnt = wa_bseg-hkont.
READ TABLE iskat INTO wa_skat WITH KEY saknr = wa_bseg-hkont.
IF sy-subrc = 0.
wa_tax-gl_desc = wa_skat-txt50.
ENDIF.
wa_tax-set_off = wa_bseg-wrbtr.
wa_tax-fwbas = wa_bseg-fwbas.
wa_tax-vat_amt = wa_bseg-pswbt.
wa_tax-description = 'VAT CG Sett off'.
wa_tax-cond_type = 'JVCD'.
ENDIF.
CLEAR wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'JP5' INTO wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
hkont = '0002868001' INTO wa_bseg. "vat changed for V0 tax code
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-gl_accnt = wa_bseg-hkont.
READ TABLE iskat INTO wa_skat WITH KEY saknr = wa_bseg-hkont.
IF sy-subrc = 0.
wa_tax-gl_desc = wa_skat-txt50.
ENDIF.
wa_tax-vat_amt = wa_bseg-pswbt.
wa_tax-set_off = wa_bseg-wrbtr.
wa_tax-cond_type = 'JVRD'.
wa_tax-fwbas = wa_bseg-fwbas.
wa_tax-description = 'VAT RM Set off'.
ENDIF.
CLEAR: wa_bseg,wa_skat.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
shkzg = 'H'
koart = 'K'
INTO wa_bseg.
IF sy-subrc = 0.
wa_tax-total_value = wa_bseg-wrbtr.
ENDIF.
START OF MODIFICATION BY ASHOK.CH ON 08.02.2008
service_tax
CLEAR wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'VS8' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-gl_accnt = wa_bseg-hkont.
READ TABLE iskat INTO wa_skat WITH KEY saknr = wa_bseg-hkont.
IF sy-subrc = 0.
wa_tax-gl_desc = wa_skat-txt50.
ENDIF.
wa_tax-service_tax = wa_bseg-wrbtr.
wa_tax-description = 'Service Tax'.
wa_tax-cond_type = 'JSRT'.
ENDIF.
service_ecess
CLEAR: wa_bseg,wa_skat.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'VS9' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-service_ecess = wa_bseg-wrbtr.
ENDIF.
**********changes by vincy on 31.01.08*********************
service_shcess
CLEAR: wa_bseg.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr
flag = ''
ktosl = 'VSE' INTO wa_bseg.
IF sy-subrc = 0.
wa_bseg-flag = 'X'.
MODIFY it_bseg INDEX sy-tabix FROM wa_bseg.
wa_tax-service_shcess = wa_bseg-wrbtr.
ENDIF.
*************************end of changes***********************
END OF MODIFICATION ON 08.02.2008
APPEND wa_tax TO it_tax.
ENDIF.
CLEAR :wa_tax,wa_bseg,wa_bkpf,wa_skat.
ENDLOOP.
CLEAR wa1_ekbe.
LOOP AT it1_ekbe INTO wa1_ekbe.
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl
WITH KEY rdoc1 = wa1_ekbe-ebeln
ritem1 = wa1_ekbe-ebelp.
*New query added by Nilesh
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl
WITH KEY rdoc1 = wa1_ekbe-lfbnr
ritem2 = wa1_ekbe-lfpos.
READ TABLE it_bkpf INTO wa_bkpf
WITH KEY awkey = wa1_ekbe-awkey.
IF sy-subrc = 0.
READ TABLE it_bseg WITH KEY bukrs = wa_bkpf-bukrs
belnr = wa_bkpf-belnr
gjahr = wa_bkpf-gjahr.
IF sy-subrc = 0.
wa_ekexclf-belnr = wa1_ekbe-belnr.
wa_ekexclf-budat = wa1_ekbe-budat.
wa_ekexclf-menge = wa1_ekbe-menge.
wa_ekexclf-ebelp = wa1_ekbe-ebelp.
wa_ekexclf-ebeln = wa1_ekbe-ebeln.
wa_ekexclf-gjahr = wa1_ekbe-gjahr.
wa_ekexclf-awkey = wa1_ekbe-awkey.
wa_ekexclf-lifnr = it_bseg-lifnr.
wa_ekexclf-matnr = it_bseg-matnr .
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl "for records for which either rdoc1 or matnr
WITH KEY rdoc2 = wa1_ekbe-lfbnr "not maintained in ekbe by vincy on 16.06.08
menge = wa1_ekbe-menge.
IF sy-subrc <> 0 .
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl
WITH KEY rdoc1 = wa1_ekbe-ebeln
exdat = wa1_ekbe-bldat
matnr = wa1_ekbe-matnr
menge = wa1_ekbe-menge.
ENDIF.
READ TABLE it_j_1iexcdtl INTO wa_j_1iexcdtl
WITH KEY rdoc1 = wa1_ekbe-ebeln
ritem1 = wa1_ekbe-ebelp.
IF sy-subrc = 0.
wa_ekexclf-belnr = wa1_ekbe-belnr.
wa_ekexclf-budat = wa1_ekbe-budat.
wa_ekexclf-menge = wa1_ekbe-menge.
wa_ekexclf-ebelp = wa1_ekbe-ebelp.
wa_ekexclf-ebeln = wa1_ekbe-ebeln.
wa_ekexclf-gjahr = wa1_ekbe-gjahr.
wa_ekexclf-awkey = wa1_ekbe-awkey.
wa_ekexclf-exnum = wa_j_1iexcdtl-exnum.
wa_ekexclf-exdat = wa_j_1iexcdtl-exdat.
wa_ekexclf-lifnr = wa_j_1iexcdtl-lifnr.
wa_ekexclf-matnr = wa_j_1iexcdtl-matnr .
wa_ekexclf-maktx = wa_j_1iexcdtl-maktx .
wa_ekexclf-capind = wa_j_1iexcdtl-capind.
wa_ekexclf-exbas = wa_j_1iexcdtl-exbas.
wa_ekexclf-exbed = wa_j_1iexcdtl-exbed.
wa_ekexclf-ecs = wa_j_1iexcdtl-ecs.
wa_ekexclf-werks = wa_j_1iexcdtl-werks.
wa_ekexclf-ritem1 = wa_j_1iexcdtl-ritem1.
wa_ekexclf-rdoc1 = wa_j_1iexcdtl-rdoc1.
wa_ekexclf-docyr = wa_j_1iexcdtl-docyr.
wa_ekexclf-exaddtax1 = wa_j_1iexcdtl-exaddtax1.
IF it_bseg-flag_21 = 'X'.
wa_ekexclf-exbas = wa_ekexclf-exbas * -1.
ENDIF.
MODIFIED BY ASHOK.CH ON 08.03.2008
IF wa_j_1iexcdtl-WERKS NE 'RD01' .
wa_ekexclf-exbed = wa_j_1iexcdtl-exbed.
wa_ekexclf-ecs = wa_j_1iexcdtl-ecs.
wa_ekexclf-exaddtax1 = wa_j_1iexcdtl-exaddtax1.
IF it_bseg-flag_21 = 'X'.
wa_ekexclf-exbed = wa_ekexclf-exbed * -1.
wa_ekexclf-ecs = wa_ekexclf-ecs * -1.
wa_ekexclf-exaddtax1 = wa_ekexclf-exaddtax1 * -1.
ENDIF.
ELSE.
wa_ekexclf-exbed = wa_j_1iexcdtl-BEDINV.
wa_ekexclf-ecs = wa_j_1iexcdtl-ecsINV.
wa_ekexclf-exaddtax1 = wa_j_1iexcdtl-exaddINV1.
ENDIF.
END IF MODIFICATION ON 08.03.2008
APPEND wa_ekexclf TO it_ekexclf.
CLEAR :wa_lfa1,wa_j_1iexcdtl,wa1_ekbe.
ENDIF.
READ TABLE it_lfa2 INTO wa_lfa2
WITH KEY lifnr = wa_ekexclf-lifnr.
IF sy-subrc = 0.
wa_ekexclf-name1 = wa_lfa2-name1.
wa_ekexclf-ktokk = wa_lfa2-ktokk.
ENDIF.
APPEND wa_ekexclf TO it_ekexclf.
ENDIF.
ENDIF.
CLEAR :wa_lfa1,wa_j_1iexcdtl,wa1_ekbe,wa_lfa2,wa_ekexclf.
ENDLOOP.
CLEAR wa_ekexclf.
LOOP AT it_ekexclf INTO wa_ekexclf.
wa_final-belnr = wa_ekexclf-belnr.
wa_final-budat = wa_ekexclf-budat.
wa_final-menge = wa_ekexclf-menge.
wa_final-ebelp = wa_ekexclf-ebelp.
wa_final-ebeln = wa_ekexclf-ebeln.
wa_final-gjahr = wa_ekexclf-gjahr.
wa_final-awkey = wa_ekexclf-awkey.
wa_final-exnum = wa_ekexclf-exnum.
wa_final-exdat = wa_ekexclf-exdat.
wa_final-lifnr = wa_ekexclf-lifnr.
wa_final-matnr = wa_ekexclf-matnr .
wa_final-maktx = wa_ekexclf-maktx .
wa_final-shcess_amt = wa_ekexclf-exaddtax1.
IF wa_ekexclf-capind = 'C'.
wa_final-capind = 'Consumables'.
ENDIF.
IF wa_ekexclf-capind = 'A'.
wa_final-capind = 'Assets'.
ENDIF.
IF wa_ekexclf-capind = 'T'.
wa_final-capind = 'Tools'.
ENDIF.
IF wa_ekexclf-capind = ''.
wa_final-capind = 'Raw Material'.
ENDIF.
IF wa_ekexclf-capind = 'N'.
wa_final-capind = 'Non Cenvatable'.
ENDIF.
IF wa_ekexclf-capind NE 'C' AND wa_ekexclf-capind NE 'A' AND
wa_ekexclf-capind NE '' AND wa_ekexclf-capind NE 'N'.
wa_final-capind = wa_ekexclf-capind.
ENDIF.
wa_final-exbas = wa_ekexclf-exbas.
wa_final-exbed = wa_ekexclf-exbed.
wa_final-ecs = wa_ekexclf-ecs.
wa_final-werks = wa_ekexclf-werks.
wa_final-ritem1 = wa_ekexclf-ritem1.
wa_final-rdoc1 = wa_ekexclf-rdoc1.
wa_final-docyr = wa_ekexclf-docyr.
wa_final-name1 = wa_ekexclf-name1.
wa_final-ktokk = wa_ekexclf-ktokk.
wa_final-excise = wa_final-exbas + wa_final-exbed + wa_final-ecs + wa_final-shcess_amt.
CLEAR :wa_tax.Hi ,
I think you are using the redundant selects to fetch the data from BSEG.
First select all the data into an internal table based on bkpf.
Now you can distribute the data into whatever tables you want using the loop,read-binary search and append statements..
Loop at it_bseg.
read it_bseg where
xxxxx
xxxxx
binary search.
append wa to it2_bseg.
endloop
This avoid several database fetches..
Thank you.. -
No tax information exists for billing document
Hi
We have a problem. In our scenario, we create a service order followed by service confirmation and bill from service confirmation. All prices including taxes are maintained in r/3. prices and taxes are picked in the service confirmation also.
When we create an invoice from crm (CRM billing), the correct price and tax is picked . But when we try to maintain billing documents, we get an error as follows.
" No tax information exists for billing document 90000108-0000000010, condition type JIVC". Document are not getting posted to R/3.
JIVC is the tax condition type created in r/3 and downloaded to crm. GL account determination settings have been maintained in CRM.
However when i do a billing in CRM without tax, accounting documents are generated and hitting the right GL account. Also, when we do a billing in in r/3, the tax is hitting the right GL account.
I have not maintained any TTE settings in CRM. Are TTE settings required at all in this scenario? If so could you inform what needs to be done.?
We are on CRM 5.0 and R/3 4.7.
Thanks and regards
BhaskaranHi Bhaskaran,
In CRM according to the taxes there r two ways of calculation,
in ur scenario u r using the R3 billing so it according to downloading of condition types and cond records it will shows the taxes in the invoice
if u r maining u need to call the TTE
i hope u r with indian client if follow in backend
check these settings in R3
TAXINN (India):
Following are the condition types:
Define New Condition Type
IMG > Sales and Distribution > Basic Functions > Pricing > Pricing Control > Define Condition Types > Maintain Condition Types (V/06)
T.Code - Details of Condition Types
V/06 JIVP copy of JLST (A/R VAT Payable) & change condition category to D & Access Sequence MWST
V/06 JIVC copy of JLST (A/R CST Payable VAT) & change condition category to D & Access Sequence MWST
OBQ1 - JIVP copy of JLST (A/R VAT Payable)
OBQ1 - JIVC copy of JLST (A/R CST Payable VAT)
Define Account Key JN6,JN7 & JN8 (T.Code: OBCN & also in SD)
IMG> Financial Accounting> Taxes on Sales and Purchases> Basic Setting> Check & change setting for Tax Processing (OBCN)
IMG> Sales & Distribution> Basic Function> Account Assignment / Costing> Revenue Account Determination> Define & assign Account Keys> Define Account Keys.
and check the proper condition records r downloaded or not check middleware settings for that.
If u r doing CRM billing i am not sure of indian client, as i know u need to do maintain the Pricing procedure in CRM also and u have to call the TTE
Regards
Manohar -
Best practice for storing price of an item in database ?
In the UK we call sales tax, VAT, which is currently 17.5%
I store the ex-VAT price in the database
I store the current VAT rate for the UK as an application variable (VAT rate is set to change here in the UK in January)
Whenever the website display the price of an item (which includes VAT), it takes the ex-VAT price and adds the VAT dynamically.
I have a section in the website called 'Personal Shopper' which will happily search for goods in a fixed priced range eg. one link is under £20, another is £20-£50
This means my search query has to perform the VAT calculation for each item. Is this practice normal, or is it better to have a database column that stores the price including VAT ?I'm also based in the UK, and this is what we do:
In our Products table, we store a Product Price excluding VAT and a VAT rate ID, which is joined off to a VAT Rates table. Therefore in order to calculate selling price yes, this is done at the SQL level when querying back data. To store the net, vat and gross amounts would be to effectively duplicate data, hence is evil. It also means that come January we only have to update that one row in one table, and the whole site is fixed.
However.
When someone places an order, we store the product id, net amount, vat code id, vat amount and vat percentage. That way there's never any issue with changing VAT codes in your VAT codes table, as that'll only affect live prices being shown on your website. For ever more whenever pulling back old order data you have the net amount, vat amount and vat percentage all hard-coded in your orders line to avoid any confusion.
I've even seen TAS Books get confused after a VAT change where in some places on an order it recalculates from live data and in others displays stored data, and there have been discrepancies.
I've seen many people have issues with tax changes before, and as database space is so cheap I'd always just store it against an order as a point-in-time snapshot.
O.
Maybe you are looking for
-
How to call OAF standard page from form by passing parameters?
Hi, I have a requirement where I need to call a standard OAF page from Oracle form, I was able to call the page through personalization, but I also want to pass a parameter to the OAF page and query the OAF page using that parameter, could anyone ple
-
How can I view all photos from a specific year?
How can I view all photos taken in one calendar year like 2010? Is there a way to filter this way?
-
Insert taking longer than usual
One of my single row INSERT operation is taking ~20 sec. It has a CLOB column (REQUEST_VALUE). This is a 2 node RAC setup. Any pointers? Here is the tablespace configuration. dba_tablespaces: PROD01_DATA PROD01_LOB dba_segments for the table Tablespa
-
Re: Remove log messages from loop
CURSOR cur_item_rev_child IS SELECT ffv.flex_value, --org code mp.organization_id FROM fnd_flex_values ffv, fnd_flex_value_sets ffvs, mtl_parameters mp WHERE ffv.flex_value_set_id = ffvs.flex_value_set_id AND ffvs.flex_value_set_name = 'EMR Add Spec
-
Why can't I access Google Drive?
I tried to access Google Drive apparently I have to download it again but everytime I do it comes up error. Why? Solution? I need it for work.