VAT line item wise display in MIRO screen

Hi Team,
When I am taking MIRO, I am getting the base value of the stock purchased at line item level.
When I put tick mark in calculate tax, tax getting calculate. But this is not appearing in the line item level display.
I am working in retail. Each document contains at least 20 line items. But the vat for this is appearing in gross level. this creates the problem in verification.
How can I get the VAT column also beside the amount column at the line item level.
Please suggest.
Mallesh

Hi Malleswara Rao,
The VAT gets calculated in MIRO at gross level only. If clubs the multiple line items having same Tax Code to calculate the tax at gross level.
This is a standard design. You can also refer OSS note 1175418 which indicate the same kind of limitation in VAT processing.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1175418
Hope this will clarify.
Regards,
Gaurav

Similar Messages

Fbl1n and fbl5n line item wise display the cutomer and vendor name

Hi,
My user is asking report for fbl5n and fbl1n line itemwise dispaly vendor and customer.See the report for one time vendor and customer name displaythe line item wise display in FBL!N/FBL5N. but not the display the regular vendors/customer.So one time table name BSEC
Please advise
Regards.
Edited by: yps y on Nov 13, 2008 1:26 PM

Hi,
line item reports FBL1N/FBL5N are reading the line items (wow, what a big surpise ) and displaying information on line item level.
As the vendor/customer name is NOT stored in the line items, you cannot display this in the lines (along with other item level information., like amount, posting key, doc.type, etc.). You may find a field called "Name 1) in the field catalog when configuring the ALV layout but this is empty for normal customers/vendors. It is only filled in for one time (Cpd) customers - the reason is as explained above: for these special accounts, the name IS stored on line item level (it varies from item to item),, that's why it can be read and displayed in the items.
Now how about normal customers/vendors?
You have to activate Business Transaction Event 1650 and implement a simple code so that depending on the account type (D = customer, K = vendor), you get the business partners name from table KNA1 / LFA1 and put it into field Name1.
Hope that helps, points welcome
Csaba

Fetch screen fields Line item wise

Hi All,
I have a requirement where i've to display some popup messages based on some conditions in MIGO transaction when POST button is clicked.
For that i have done certain changes in a BAdI IF_EX_MB_MIGO_BADI~POST_DOCUMENT .
But i require to read the screen field for G/L account ie GOITEM-KONTO of screen number 0345.
the G/L account can be accessed thru internal table IT_MSEG-SAKTO in the method, but the problem is the screen field has been left blank and when POST is clicked, by the time this BAdi is reached, the value is filled. And i need to add few codes only when the screen field has been left blank.
I found out FM - DYNP_VALUES_READ . But this reads only header screen data, so i'm unable to retrieve the line item wise G/L account screen values.
Please help.
Thanks,
Ateet

Hi Petr,
I dont think u read the question properly.
The problem is the screen field has been left blank and when POST is clicked, by the time that BAdi is reached, the value is filled. And requirement is to execute some part of code only when the screen field for G/L account is left blank/not blank. I want screen field value , not the value which is in IT_MSEG.
While giving inputs in MIGO screen it is blank but by the time it reaches the BAdI where i've written the code its getting filled. I want the values from screen just before it gets filled.
I was hoping to find some FM like DYNP_VALUES_READ which fetches screen elements line item wise too.
I think i will have to try n search a different BAdI where i can get the screen values b4 updation.
Regards,
Ateet

Business Place & Business Area in VAT Line item in MIRO

Hi Gurus,
I want to defualt the following values in the VAT line item in while doing MIRO.
1. Business place in the "VAT line item" to be defaulted from the "Vendor Line item".
2. Business area in the "VAT line Item" to be defaulted from its relevant "Material / Expense/ GR/IR Line item".
The same thing i have done in FB60 transaction by using a BADI. But the same BADI is not working for MIRO.
What the BADI does it goes and updates the BSEG table for the fields "Bupla (Business Place) & GSBER(Business Area).
But while doing MIRO the BSEG table is not called at all and hence the BADI which is used earlier is not able to update the fields and hence cannot be used.
I feel the reason could be that while doing MIRO the BSEG table is not called directly but it is called through a Function Module. In such case a BADI will be required which will call the relevant Function module.
Need your help in how to update the VAT Line Item's Business Place & Business Area in the MIRO document.
Will award points if issue is resolved or if your answer is useful.
Rgds
Prasad

Hi
Try using substitution maintained in FI.Transaction code OBBH.
Maintain the prerequisite based on the Transaction code.
Copy the same logic used in BAdi for the exit created.
We have used this for similar type of requirements
Award points if useful
Thanks & Regards
Kishore

Line item wise Qty in Handling Unit Management

Dear All,
I am working and testing Handling Unit Management. As per the client requirement, he wants Multilevel Packaging (Manually) for materials as-
E.g. 100 Pieces will be packed in 1 Small Carton.
       100 Small Cartons will be packed in 1 Big Carton.
       10 Big Cartons will be packed in 1 Pallet.
Now while creating delivery I packed 2 materials separately. And in the item level it is showing as a whole, means total 1100 PC packed in 11 Small carton, 11 Small cartons packed in 5 Big cartons and 5 Big cartons packed in 2 Pallets. Please find the below screen shot.
Now when I check this delivery number in tables LIPS-VBELN, it is showing the entire qty of Small carton, Big carton and Pallets as 11, 5, 2 respectively. But actually it has show each material or line item wise No. of Small carton, Big carton and pallet used.
E.g. For 1st material Small Boxes = 5
                               Big Carton = 2
                               Pallet = 1
      For 2nd material Small Boxes = 6
                               Big Carton = 3
                               Pallet = 1
My question is, is there any table or logic where I can fetch all these details for all material that how many packaging material and qty has been used. Because in packing list the same needs to get printed each line item wise. I checked in VEPO and VEKP table as well but not getting any input.
Kindly help.
Regards:
Abhishek

First of all, why you don't have any quantities assigned against Small cartons, big cartons and pallets?
Well, for your requirement. As functional consultant, you should be smart enough to interpret & analysis the data when you have tables and data in hand. Anyways, in your case,
As Pallet is the highest level pack material.
Pass HU no of pallet in VEKP- EXIDV, in your case for one of the pallet, it is 1000013558.
For that you will get, Internal HU no. VEKP-VENUM, say, 86.
Pass VEKP-VENUM = VEPO-VENUM.
With that you will get Lower-level HU, VEPO-UNVEL, that will be internal HU No for Big Cartons & VEPO-VEANZ for packing material quantity.
Then pass VEPO-UNVEL = VEPO-VENUM, by this you will get internal HU No for Small Cartons in VEPO-UNVEL & VEPO-VEANZ for packing material quantity.
Again, pass VEPO-UNVEL = VEPO-VENUM, by this you will get following info:
Table - Fields
Field Desc
VEPO-VEPOS
HU item
VEPO-VBELN
Delivery
VEPO-POSNR
Delivery Item
VEPO-VEMNG
Packed quantities
Try and share your feedback.
Thanks, JP

Line Item Value change in MIRO Transaction

I have one requirement i.e as follows.
<b>Line Item Value change in MIRO Transaction</b>
After getting the items in table control of the miro screen of a particular order.
I have to clicked on edit own condition of selected item.
then it will show another screen ( create invoice document item - conditions)which have the all condtions details like
Fra1 , frb1 , sd% , Penalty % , gross price , frieght charges etc.
In this screen first time it is showing line item as
in the miro intial screen i.e. if u click po item
10 it will show 10 only.
after updating fra1 value , i came back to the main screen at that time it is asking that select the any one of three.
after selecting manual selection its fra1 was changed.
once again if i go to the same line item by clicking
the edit own condition(13 column if u select all information in textbox whixh is above tablecontrol right corner) it is showing line item as 1 in screen ( create invoice document item - conditions) which should be line item as 10. ( here i took line item as 10)
Please clarify this, why it is showing
first time as a original line item and
after updating it is showing like
for line item 10 -
1
               20 -
2
              100 -
10
              110 -
11.

"...it does not work..." is probably the worst description of a problem you can imagine. As an application developer you should know that. Do you use firebug to see what happens once it "does not work"? Any better hints?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to view ACCNTS payble reconaccount Line Item wise after cheking tick

I want to see the ACCOUNTS Payble RECONCILITION acoount LINE ITEM wise.
I had seen the GL Master and their I found that The LINE ITEM was not Checked.
later I had checked the Line Item Display, but Iam not able view the previous transactions Line Item Wise For that GL Account.
1. Kindly suggest me how I can see the Previous Line Items after cheking the Line Item Disply.
2. kindly Tell Me if I can Run any Programme.
3.If its so what programme I can run and how.
4. Is there any problem by checking the line item display to the GL account.
Thanks In Advance
I will definately reward the points
Akash Narayana

Hi,
1. Enable Line Item Display in GL master.
2. Block the GL for Posting in Company Code.
3. Run the Program RFSEPA01.
4. Check whether Line item details are available and then unblock the GL.
Regards
Hari

Auc to Main Asset Line Item wise details

Hi Expert,
i have find and read number of thread regarding details of converted from AUC asset into Main Asset. in sap there is no any standard report where i got the details like AUC asset converted into Main Asset.
scenario is , we have create Capital PO say 5 lacks account assignment category A. under purchase we have given Internal order and Auc Asset No.2005001.
after received the goods. entry has been made.
now we have book some expenses against AUC PO say Rs.25000+10000+3000 =38000/- Total extra so now while settle the AUC asset to main asset amount would be 5,00,000+38000= 5,38,000/-.
in above process we do settle thru KO88 . AIAB and AIBU.
kindly help where which table we can see the line item details i.e Rs.38000 coz not any standard report to achieve the above process.
also give me the idea of Zreport. to achieve.
Thanks in advance.
Kind regards
Pranav Kr. Gupta

Mukthar sir,
we have already transferred from auc asset to Main assset. now we want to know line item wise how much cost occurred while AUC Asset time . say Rs.5,50,000/- same amount will come in Main asset number.
only accounting entry showing below
70 : GL No. 211200 Furniture main asset A/c No.i.e 2005009 5,50,000
75 GL No. 217300 WIP Others AUC Asset A/c i.e No. 3210000 5,50,000
Note : we want details of 5,50,000/- how many line items generated .
if i give on selection screen Main asset Number system will suppose to show the details of Rs. 5,50,000/- line item wise along with AUC Asset Number.
Kindly help . or if any standard report to get this information , like if i give main asset Number then system automatically show the details of AUC to Main Asset.
Thanks
Pranav Kr. Gupta

WBS-Line item wise

Dear Fnds,
I maintained WBS Element Line item wise in Account assignment Tab in Sales order and i Copied the Milestone for Respective WBS.
After saving the Sales ,If i go in Change /Display Mode...That WBS i can not able to find in Line item Wise.
Regards
raj.

Hi,
You can get WBS Line item wise with Milestone details by using following reports.
CN53N - Milestones
CN53 - Milestones
Regards,
Sandeep

RV document posting line item wise in FBL5N tcode

Dear Experts,
I had posetd the Invoice to accounts with 3 line items. While checking the FBL5N report the Rv doument no is displaying 3 items i.e. repective line item wise prices are displayed. But my requirement is i want to check the doument wise i.e. all line items rolling up to singlke price. How to achied this.
Regards
abhi

Hi Lakshmi,
We are using ECC 6.0 Version i am unable to find the path as per your reply wherein Perform Document Summarization for Sales and Distribution is available in PERIODIC PROCESSING> Integration> SD. But what settings needs to be done when i check the Perform Document Summarization for Sales and Distribution system is asking for Ref Transaction and when i check Billing document header it is in display mode with New Entries required.
My requirement is i am posting a Invoice with 2 line items ( service related Billing). Please find the below report in FBL5N
6700147 6700147 RV 22.07.2009 22.07.2009 123.00
6700147 6700147 RV 22.07.2009 22.07.2009 222.00.
But the accounting document No is same. i need one A/c No 67000147 and the total amount has 345.
Regards
jayanth

PO Line Item wise gross value for combination of WBS and Material Group

Hello,
Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
Regards,
Milind Dumbre

Dear Milind
No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
Warm regards
Ramakrishna

PO (Line Items wise) Payment Status Report

Hi Friends,
Is it possible to get a PO (Line Items wise) Payment Status Report.
My client wants PO Line wise payment status as a MM report development.
We have Down Payment, Residual & Retention money as a business practise with our vendors
Following is the MM-FI flow in our company code..
Create & Release PR u2013 MM - Creating PR
Create & Release PO (ME21N) u2013 MM u2013 Creating PO
F-47 Down Payment Request u2013 MM u2013 Creating DPR
F-48 Post Vendor Down Payment u2013 FI - Posting DPR
FBZ5 Print Check for Payment Document u2013 FI - For printing cheques for DP only
MIGO/ML81N, GR u2013 MM u2013 SES/GR for PO
MIR7/MIR6 IR - MM/FI u2013 Parking & IR
F-44 Clear Vendor u2013 Linking advance with IR (as residual clearing)
F-53/F-58 u2013 Posting Payments after deducting Retention
F-04 Post with Clearing u2013 Clearing Outgoing account entries with Main account
Thanks in advance.
Regards,
Vikrant Sood

as per my knowledge you can configue a new Z table or prepare a Query using EKPO table you will your desired result.
regards,
Ninad Kshirsagar

Goods Receipt Value line item wise

Hi Experts,
My client wants show Goods Receipt Value line item wise at the time of GR entries.
He wants show GR Value before saving the GR document.
Please advise me how it is possible.
Thanks in advance,
Chandhu

and what will be the benefit of such request? do you think a receiver (warehouse personell) can valuate whether the Po price is correct maintained by a buyer?
Maybe it is better to create check reports for the buyers instead.
you can certainly check in a user exit if price is far away from the price maintained in material master and can issue a warning or even an error.

Line item wise billing

Hi All,
Can we do sale order related billing for individual line item wise and quantity wise?
If this is for delivery related billing then the setting will be in item category, billing relevance as K. But what will be the settings for order related billing?
Kumar

Hi,
In two ways you can achieve your requirement.
1.Goto the T.Code VF01
Enter your sales order number.Donot press Enter.
Click on "Selection list".
Select your items.Click on Copy.
Save the invoice.In "VOV7" T.Code maintain the billing relevance as "C".
2.Goto the T.Code "VA02".
Double click on the item.Goto Billing document tab.
Maintain the billing block under "Billing" tab.
Save.
Goto the T.Code "VF01".Enter your order number.
Create the billing document.
Next Goto VA02 and remove the another block.
Create the invoice.
Regards,
Krishna.

Line items not displaying

Hi,
When i simulate in F-28(customer), only one line items is displaying
eg: 40 SBI a/c 1500
but not displaying the remaining items like
eg: 40 discount a/c 500
50 ABC cutomer a/c 2000
what may be reason. where can i change settings
Rgds
sunfico

Hi
Check the partner function of the customer. Also check whether the customer is linkekd to any vendor accounts and that vendor has a open items.
Thanks
Ashok
Assign points for useful answer

VAT line item wise display in MIRO screen

Similar Messages

Maybe you are looking for