VBA: Refresh and Clear with NO send and No dialogs

BPC 5.1 SP3
Scenario:
An input schedule has a button on it to "build" the schedule (DRE). Once clicked, VB builds the DRE and then needs to refresh it.
Problem:
There doesn't appear to be any MNU macros that will:
1. Clear input
2. Refresh
...WITHOUT sending and without prompting the user in any way.
MNU_eTools_Refresh
Prompt the user to clear input, which is not desired.
MNU_eSubmit_RefSchedule_Sheet_ClearAndRefresh
Sends the data, which is definitely not desired.
Is there a MNU macro that will refresh, clear, without sending and prompting? Or, does anyone know of a possible workaround?

Hi John Kreps,
Just Information for you. It's a VBA function:
function abc( )
application.Run("MNU_eTools_Refresh(..)")
end function
Notes:
1. MNU_eTools_Refresh have the parameters, please read the sap bpc help.
2. Please put the code into the module on Ms.Excel.
Thanks,

Similar Messages

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

TS3276 ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working fine

ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Help with Refreshing and Calling Screens

Hi everyone. I have somewhat of a simple ABAP program in which the user will enter data on Selection-Screen 1000. This will then be loaded into an Object Oriented ALV Grid for display purposes only (screen 0100). At any time, the user may use the back button on the ALV Grid Screen; which will take them from screen 0100 to screen 1000(Selection Screen). Lets assume the user does not want to go back to the original selection screen from the ALV Grid Screen; they entered the information correctly and want to continue processing using a custom button I've created which will continue to process the record of data into a BW ODS. This process works, but now I would like to use the write statement once the custom button is clicked to show a summary of the data I am inserting into the ODS after the data has been inserted. The problem is, the title of the ALV Grid still shows and the Write statement is processed, but not shown on the screen. I've been trying to refresh the screen with set screen and call screen combinations, but no luck. Any Help would be appreciated. Thanks!
Here is a sample of the code below:
*& Report ZINC_DSP_SALES_INCRASE
REPORT ZINC_DSP_SALES_INCREASE MESSAGE-ID zsm.
INCLUDE <icon>.
DATA: credit_itab type standard table of /bic/azincosvi00,
 wa_credit like line of credit_itab,
 alv_itab type standard table of /bic/azincosvi00,
 wa_alv like line of alv_itab.
DATA: ok_code LIKE sy-ucomm,
 save_ok LIKE sy-ucomm,
 incent type table of /bic/azincosvi00,
 g_container TYPE scrfname VALUE 'Increase DSP Sales',
 grid1 TYPE REF TO cl_gui_alv_grid,
 gs_layout TYPE lvc_s_layo,
 g_custom_container TYPE REF TO cl_gui_docking_container.
DATA: active_guid like /bic/mzguid_dsr,
 UNIQUEKEY LIKE /BIC/AZINCOSVI00-/BIC/ZRCRDKEY,
 rpt_per_rec like /BIC/MZRPTPRDCR,
 dsrcode like /bic/mzdsrcode-/bic/zdsrcode,
 payrec like /bic/mzsubcode.
CLASS lcl_event_receiver DEFINITION DEFERRED.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
 METHODS:
 handle_toolbar
 FOR EVENT toolbar OF cl_gui_alv_grid
 IMPORTING e_object e_interactive,
 handle_user_command
 FOR EVENT user_command OF cl_gui_alv_grid
 IMPORTING e_ucomm.
 PRIVATE SECTION.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
This will create the toolbar
METHOD handle_toolbar.
 DATA: ls_toolbar TYPE stb_button.
 CLEAR ls_toolbar.
 MOVE 3 TO ls_toolbar-butn_type.
 APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to show booking table
 CLEAR ls_toolbar.
 MOVE 'CREATE' TO ls_toolbar-function.
 MOVE ICON_OKAY TO ls_toolbar-icon.
 MOVE ' ' TO ls_toolbar-disabled.
 APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'CREATE'.
Insert /bic/azincosvi00 from wa_credit.
CALL METHOD grid1->free.
SET SCREEN '200'.
WHEN 'OTHERS'.
" DO NOTHING
ENDCASE.
ENDMETHOD.
ENDCLASS.
Data: event_receiver TYPE REF TO lcl_event_receiver.
START-OF-SELECTION.
Selection-Screen BEGIN OF BLOCK 1 with frame title text-001.
Parameters: start like /bic/azincosvi00-BILL_DATE.
Selection-Screen END OF BLOCK 1.
Selection-Screen BEGIN OF BLOCK 3 with frame title text-003.
Parameters: guid type /BIC/OIZGUID_DSR,
 pcode type /BIC/OIZPGMCODE,
 scode type /BIC/OIZSUBCODE,
 reason type /BIC/OIZEXCPTC,
 quantity(5) type n,
 discount type /BI0/OISUBTOTAL_4.
Selection-Screen END OF BLOCK 3.
END-OF-SELECTION.
IF quantity <> '00000'.
 if pcode <> 'SCTMS'.
 message e000 with 'Quantity can only be used with seating spiff'.
 endif.
ENDIF.
GET REPORT PERIOD INFO using today's date.
select single * from /bic/mzrptprdcr INTO rpt_per_rec
 where calyear = sy-datum(4)
 and /bic/zpgmcode = pcode
 and ( /BIC/ZRPPRDSTR <= start
 and /BIC/ZRPPRDEND >= start ) .
if sy-subrc <> 0.
 message e000 with
 'Report Period NOT FOUND for' pcode ' ' sy-datum(4).
endif.
Select Active Guid based upon user entry on selection-screen
Select single * from /bic/mzguid_dsr into active_guid
 where /bic/zguid_dsr = guid
 and /bic/zdsrstat = 'A'.
 If sy-subrc <> 0.
 MESSAGE e000 WITH 'Please enter a valid GUID'.
 ENDIF.
Select DSR Code based upon a valid guid entered
Select single /bic/zdsrcode from /bic/mzdsrcode into dsrcode
 where /BIC/ZGUID_DSR = guid
 and /BIC/ZDSRCDST = 'A'.
 If sy-subrc <> 0.
 MESSAGE e000 WITH 'GUID entered does not have an active dsr code.'.
 ENDIF.
Select MAX( /BIC/ZRCRDKEY ) FROM /BIC/AZINCOSVI00 INTO WA_CREDIT-/BIC/ZRCRDKEY.
UNIQUEKEY = WA_CREDIT-/BIC/ZRCRDKEY + 1.
WA_CREDIT-/BIC/ZRCRDKEY = UNIQUEKEY.
WA_CREDIT-PO_NUMBER = UNIQUEKEY.
WA_CREDIT-/BIC/ZERDAT = SY-DATUM.
WA_CREDIT-BILL_DATE = SY-DATUM.
WA_CREDIT-/BIC/ZRPPRDSTR = rpt_per_rec-/BIC/ZRPPRDSTR.
WA_CREDIT-/BIC/ZRPPRDEND = rpt_per_rec-/BIC/ZRPPRDEND.
WA_CREDIT-/BIC/ZCUBPRCDT = SY-DATUM.
WA_CREDIT-/BIC/ZRPTPRDCR = rpt_per_rec-/BIC/ZRPTPRDCR.
WA_CREDIT-/BIC/ZINCPYPRC = '00000000'.
WA_CREDIT-/BIC/ZGUID_DSR = ACTIVE_GUID-/bic/zguid_dsr.
WA_CREDIT-/BIC/ZDSRCODE = dsrcode.
WA_CREDIT-/BIC/ZPGMCODE = PCODE.
WA_CREDIT-/BIC/ZUNASSIGN = 'N'.
WA_CREDIT-/BIC/ZSUBCODE = SCODE.
WA_CREDIT-/BIC/ZSITE_ICR = ACTIVE_GUID-/BIC/ZSITE_IRG.
WA_CREDIT-/BIC/ZSUSPEND = 'N'.
WA_CREDIT-/BIC/ZSUSPNDR = ' '.
WA_CREDIT-/BIC/ZSITE_IRG = ACTIVE_GUID-/BIC/ZSITE_IRG.
WA_CREDIT-/BIC/ZSITE_CST = ' '.
WA_CREDIT-/BIC/ZINCBONUS = '0.00'.
WA_CREDIT-STAT_CURR = 'USD'.
WA_CREDIT-DOC_CURRCY = 'USD'.
WA_CREDIT-SALES_UNIT = 'ST'.
WA_CREDIT-CALYEAR = SY-DATUM(4).
WA_CREDIT-/bic/ZCASEID = SY-UNAME.
WA_CREDIT-/bic/ZSLSRSN = REASON.
WA_CREDIT-RECORDMODE = ' '.
*Depending on Program Code, populate the amounts to be paid.
Data: fivepercent type p.
 fivepercent = '0.05'.
If pcode = 'SCW5S' or pcode = 'SCTMS'.
Select single * from /bic/mzsubcode into payrec
 where /bic/zpgmcode = pcode
 and /bic/zsubcode = scode
 and CALYEAR = sy-datum(4).
 if sy-subrc <> 0.
 write: / '************** ERROR ***********************',
 / '** Missing Program Information for ',
 / pcode,
 scode,
 sy-datum(4),
 exit.
 endif.
ENDIF.
If pcode = 'SCW5S'.
WA_CREDIT-/BIC/ZINCUSDDS = discount.
WA_CREDIT-/BIC/ZPAYAMTUS = WA_CREDIT-/BIC/ZINCUSDDS * payrec-/bic/zpayper / 100.
WA_CREDIT-SUBTOTAL_4 = discount.
WA_CREDIT-/BIC/ZINC_QTY = ' '.
Endif.
If pcode = 'SCTMS'.
WA_CREDIT-/BIC/ZPAYAMTUS = quantity * payrec-/bic/zpayper / 100.
WA_CREDIT-/BIC/ZINCUSDDS = '0.00'.
WA_CREDIT-SUBTOTAL_4 = '0.00'.
WA_CREDIT-/BIC/ZINC_QTY = quantity.
Endif.
If pcode = 'SCTB'.
WA_CREDIT-/BIC/ZPAYAMTUS = '0.00'.
WA_CREDIT-/BIC/ZINCUSDDS = DISCOUNT.
WA_CREDIT-SUBTOTAL_4 = DISCOUNT.
WA_CREDIT-/BIC/ZINC_QTY = ' '.
Endif.
*Create ALV Grid to show the user what the record will look like in which they are creating.
Append wa_credit to alv_itab.
CALL SCREEN 100.
*& Module PBO OUTPUT
 text
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
 CALL METHOD grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = '/bic/azincosvi00'
 CHANGING
 it_outtab = alv_itab.
 CREATE OBJECT event_receiver.
 SET HANDLER event_receiver->handle_user_command FOR grid1.
 SET HANDLER event_receiver->handle_toolbar FOR grid1.
 CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
ENDMODULE. " PBO OUTPUT
*& Module PAI INPUT
 text
MODULE alv_pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL METHOD grid1->free.
 CALL SELECTION-SCREEN '1000'.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
*& Module 200_PBO OUTPUT
 text
MODULE 200_PBO OUTPUT.
Write at 5: 'Increase DSP Sales'.
Skip 1.
Write at 5: 'USER'.
Write at 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT

There are some problems with ok_code, you need to assign sy-ucomm at each module. Also the main problem was that you needed leave to list-processing and suppress dialog before writing. However, when you do this the screens calls change a little. You also needed to use the container correctly. Apply the correctons below and you'll be all set. Unfortunaley you will have to play around with calling the sel. screen (1000) from screen 100, I don't think call sel. screen 1000 will work properly there (you might need a custome screen instead). The user may be okay with kicking back out to sa38 after the alv display, however. Good luck and don't listen to the clowns' comments above. I once worked in that circus, Hey Guys.
Instead of this:
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'CREATE'.
Insert /bic/azincosvi00 from wa_credit.
CALL METHOD grid1->free.
SET SCREEN '200'.
WHEN 'OTHERS'.
" DO NOTHING
ENDCASE.
ENDMETHOD.
DO THIS:
METHOD handle_user_command.
 CASE e_ucomm.
 WHEN 'CREATE'.
 Insert /bic/azincosvi00 from wa_credit.
 CALL SCREEN 200.
 WHEN 'OTHERS'.
 " DO NOTHING
 ENDCASE.
ENDMETHOD. "handle_user_command
Instead of this:
*Create ALV Grid to show the user what the record will look like in which they are creating.
Append wa_credit to alv_itab.
CALL SCREEN 100.
DO THIS:
IF g_custom_container IS INITIAL.
 CREATE OBJECT g_custom_container EXPORTING dynnr = '100'
 repid = sy-cprog
 ratio = '95'.
ENDIF.
IF grid1 IS INITIAL.
 CREATE OBJECT grid1 EXPORTING i_parent = g_custom_container.
ENDIF.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
SET SCREEN 100.
CALL SCREEN 100.
Instead of this:
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = '/bic/azincosvi00'
CHANGING
it_outtab = alv_itab.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
ENDMODULE. " PBO OUTPUT
DO THIS:
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
 i_structure_name = '/bic/azincosvi00'
CHANGING
 it_outtab = alv_itab.
CALL METHOD grid1->set_toolbar_interactive.
ENDMODULE. " PBO OUTPUT
Instead of this:
MODULE alv_pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN 'BACK'.
CALL METHOD grid1->free.
CALL SELECTION-SCREEN '1000'.
WHEN OTHERS.
" DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
DO THIS:
MODULE alv_pai INPUT.
ok_code = sy-ucomm.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL METHOD grid1->free.
 LEAVE PROGRAM.
* CALL SELECTION-SCREEN '1000'.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
Instead of this:
MODULE 200_PBO OUTPUT.
Write at 5: 'Increase DSP Sales'.
Skip 1.
Write at 5: 'USER'.
Write at 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT
DO THIS:
*Take care of all your list output here
LEAVE TO LIST-PROCESSING.
SET PF-STATUS 'MAIN200'.
SET TITLEBAR 'MAIN200'.
SUPPRESS DIALOG.
WRITE AT 5: 'Increase DSP Sales'.
SKIP 1.
WRITE AT 5: 'USER'.
WRITE AT 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT
Add Moule:
MODULE 200_pai INPUT.
ok_code = sy-ucomm.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL SCREEN 100.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " 200_PAI INPUT

My iphone 3gs fell down and now it dosnt charge ,nor is the home button responding. there is a slight gap in the left side (back panel as well)..further the caller cant hear me but conversation is clear with earphones

HI all,
My iphone 3gs fell down and now it dosnt charge ,nor is the home button responding. there is a slight gap in the left side (back panel as well)..further the caller cant hear me but conversation is clear with earphones..plz help

sounds like the fall caused some damage. get it replaced through apple

Problem with file sender adapter and endSeparator

Hy,
have the following situation: with a sender File adpater i have to receive the same structure of data but in two mode.
1) First mode : each recorset is defined as a file line
   Example (not fields separator):
   fielda,fieldb,fieldc
   field2a,field2b,field2c
2) Second mode : recorset of the same line without end
    separator and fieldseparator
   Example (not fields separator):
   fielda,fieldb,fieldc,field2a,field2b,field2c,......
I configured the adapter as follow.
structure.fieldFixedLengths      1,2,3
structure.fieldNames             field1,field2,field3
structure.lastFieldsOptional     YES
structure.processFieldNames      fromConfiguration
structure.endSeparator           'nl'
PROBLEM
Mode 1) works but mode 2) doesn't work.
Could anyone solve my problem??
Thank's
Mati

Hi,
Try using two differnt record structure name for each mode.for eg give it as structure1 and structure2.then u give the content conversion parameter for both the recordset depending on ur requirement i.e, with and without end seperator.
regards
jithesh

Recently my iPhone 4s receives "phantom" SMS messages with the sender "unkown" dated 1/1/70. I delete the MSG and it appears again, and idea how to permantely delete them? I have reset my phone also.

Recently my iPhone 4s receives "phantom" SMS messages with the sender "unkown" dated 1/1/70. I delete the MSG and it appears again, and idea how to permantely delete them? I have reset my phone also. Haven't done a hard reset.

Same issue with my girlfriend's iPhone 4.
I also started a thread at https://discussions.apple.com/thread/3611603
if you find any solution yourself let me know and ill do the same

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad.

I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tried again with no success. Any help would be appreciated

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions?

I am getting a lot of static when using Brookstone wireless headphones and watching movies on the Apple TV. I know it is not headphones, because they work fine when I switch it to cable TV, then the sound is clear with no static. Any suggestions? Which wireless headphones work best with the apple TV?

Ok so I've been doing more testing. It's all videos on the iTunes store. Anytime I try to download a podcast or stream it or anything it's super slow. To download an episode of Diggnation it tells me over 2 hours to download but the time keeps climbing and I just stop the transfer.
Some people said it's an Open DNS thing? Maybe it is but it's not computer specific and I couldn't find a way to change the DNS settings in my Airport, only on each computer. I tried deleting PLists and restoring my Apple TV and restoring my Airport and nothing is working.
I don't know if it an issue with me, my ISP or Apple. Anyone else experiencing this problem?

I can't seem to find the bar with "file, edit, view, etc". I can view it if I press "alt", but when I hit any other key it disappears again. The back and forward arrow, house, refresh and "url" space is missing

I can't seem to find the bar with "file, edit, view, etc". I can view it if I press "alt", but when I hit any other key it disappears again. The back and forward arrow, house, refresh and "url" space is missing

* In Firefox 3.6 and later on Windows you can hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu on a toolbar.
* Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also:
* [[Menu bar is missing]]
* http://kb.mozillazine.org/Toolbar_customization

My email inbox is flooded with No Sender emails. I tried using the edit and then delete, but it still won't let me use the delete button. The emails are all highlighted.

My email inbox is flooded with No Sender emails. I tried turning it horizontally, hitting the edit button, but it won't allow me to delete them.

Try this .... reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

We each have our own device, a laptop and an iPad. when sending imessages recipients cannot tell which of us sent it other than looking at the content. Is there any way to add an identifier to make it clear who is sending the message?

We each have our own device, a laptop and an iPad. when sending imessages recipients cannot tell which of us sent it other than looking at the content. Is there any way to add an identifier to make it clear who is sending the message? I know we can say 'this is mom or this is dad" but when an email is sent it identifies the device that sent it so why not imessages too?

Stop using the same apple id on all your devices. Each person should have their own. You can still share apps via home sharing.

With "New" twitter, as of a week or so ago, it constantly refreshes and I can't figure out how to make it stop. I wonder if it's tied to an add-on, plug-in, or extension? (FWIW, IE8 does not do this)

Within the page for New Twitter, it is constantly refreshing the page. If I'm reading, it refreshes and I lose my place. If I'm typing a tweet it refreshes and deletes everything I've typed. I do not have any add-ons installed; basic list of extensions (Java Consoles; multiple versions), though I MS .net framework 1.1 has had trouble updating and is currently disabled and so is my Norton AV toolbar.
Again this only started happening 7-10 days ago, and I wonder if there was an update to Firefox or an extension/plugin perhaps causing this. Have had to resort to using Twitter on IE8. :(

Does it help if you make the Find bar (Ctrl+F) or the Add-ons bar (Ctrl+/) (Firefox > Options or View > Toolbars) visible?

Firefox browser not loading, page tabs not loading, search bar sending me to a different location. back buttons,refresh and x grayed out

search bar is not right, missing one search bar. last week the same bar would take me to a shopping site other than the site i typed in. now some things are missing, or grayed out on the tool bar, back buttons, refresh and red x is one. google button isn't working any more or option buttons. when it loads it doesnt show any tabs from last time. i have to reload several times for it to work. Some pages won't open when selected from my bookmarks.
== This happened ==
Every time Firefox opened
== last week

What version of Firefox are people using? do you have any firewall or internet security software and what version?
To find out the version of software you have go to Help and then choose About. I remember reading an article a while ago about a firewall application that when they did an update, it stopped some browsers from working or something like that.
I wonder if this is something similar?

VBA: Refresh and Clear with NO send and No dialogs

Similar Messages

Maybe you are looking for