VC version 2 problems with invitation

I recently upgraded our 3540 MCU to version 2 and created a conference via the web interface but when I try to "Invite" participants using the conference control I receive no responses from the end points using the E.164 addresses. I am not using an MCM just a 3540 and 3520 any one else play with the new vesion 2 features and discover the same problem? I like every one else must set my P.C to a date prior to December 31 2002 in order to even log on with out read only.....a bit of a pain.
Thanks in advance

You are probably using 2.2.64 that fixes the admin login issue but brings the participants invitation issue. Note that you can dial-in into MCU to get in the conference. The 2.2.65 fixes the problem.
What is your opinion about stability of the 3540 MCU - has it ever crashed (froze) under havy load (100 session module with 20 participants on 384K/s), so when the admin WEB GUI is not responding, the participants got dropped and the only way to bring it back is to reset the power?
Thanks

Similar Messages

Trial version problem with the wrie Create with the trial version

help me
trial version problem with the write Create with the trial version
i wanna delete the Create with the trail version

Publication on businCata I am sorry I do not understand your inquiry. Can you please restate your question? What Adobe software or service is your inquiry in relation too?

Outlook Calendar & problem with Invitations

Exchange calendar sync fine, but there's an interaction question or problem.
SCENARIO:
--Calendar entry is in Outlook, as "accepted", with this acceptance coming from me on Windows desktop.
--Receive a Duplicate "invitation" on the iPhone.
--On the iPhone, the event invitation shows as "maybe".
--Don't need to accept meeting invitation....
--Using the invitation slide option to "delete" it from the invite inbox, the entry is deleted AND IN THE CALENDAR AND ON THE EXCHANGE SERVER.
If you want to clean out the invitation inbox, how do you do it without deleting the actual calendar entry???

Refer to cross-post http://forum.java.sun.com/post!reply.jspa?messageID=9964809

Thunderbird 13.0.1 with lightning 1.5.1 problem with invitation

Hi all,
since the recent update to thunderbird V 13.0.1 with lightning 1.5.1 invitation with calender server 6.3 do not work anymore. Does somebody have the same experience?
What is the problem and is there any solution?
Thanks for any hints.

This was an issue with lighting 1.5.1 and is now fixed in the latest lightning release 1.5.2

Problem with invitation to windows users

Hello,
When I send an invitation through iCal to a Pc/Windows user, he can't open the invitation and put it in outlook. Have you any idea about that problem ?
Thanks
Gilles.

A new information about my problem : it seems to be a problem of 'lunar calendar' or a problem of encoding.

Trial Version Problem with toolbar

I'm working with the CS5.5 trial version. It worked fine but now when I open it I can't get the toolbar to appear and I don't see a default work space option either.
Thanks

Publication on businCata I am sorry I do not understand your inquiry. Can you please restate your question? What Adobe software or service is your inquiry in relation too?

Mars Version: Problems with Dynamic menu contribution

I create an "Eclipse 4 Application project" called test with Luna and Mars version.
In my Application I add a Dynamic Menu Item called ToTo with the following code:
Quote:
package test.handlers;
import java.util.Date;
import java.util.List;
import org.eclipse.e4.ui.di.AboutToShow;
import org.eclipse.e4.ui.di.AboutToHide;
import org.eclipse.e4.ui.model.application.ui.menu.MDirectMenuItem;
import org.eclipse.e4.ui.model.application.ui.menu.MMenuElement;
import org.eclipse.e4.ui.model.application.ui.menu.MMenuFactory;
public class Toto {
@AboutToShow
public void aboutToShow(List<MMenuElement> items) {
MDirectMenuItem dynamicItem = MMenuFactory.INSTANCE.createDirectMenuItem();
dynamicItem.setLabel("Dynamic Menu Item (" + new Date() + ")");
dynamicItem.setContributorURI("platform:/test/");
dynamicItem.setContributionURI("bundleclass://test/test.handlers.DirectMenu");
items.add(dynamicItem);
@AboutToHide
public void aboutToHide(List<MMenuElement> items) {
And the following code for the DirectMenu:
Quote:
package test.handlers;
import org.eclipse.e4.core.di.annotations.Execute;
public class DirectMenu {
@Execute
public void execute() {
System.out.println("Direct Menu Item selected");
With Luna version when I click on the menu Item I have the date and the execute part is OK
With Mars the item is here with the date, but when I click the execute is never executed?????
Can you help me!!!
Regards
Antonio

Dirk Fauth wrote on Fri, 03 July 2015 10:11It is not that easy to integrate the correction. You would need to copy the MenuManagerRenderer code to a local class and use the patched MenuManagerHideProcessor in that class. Than register the modified MenuManagerRenderer in the context so it is used instead of the default one.
So you need to get the code of MenuManagerRenderer out of the platform code, then the MenuManagerHideProcessor from Gerrit and you need to know how to replace the renderer. For the last there should be a tutorial by Lars Vogel somewhere.
Of course you should also vote for the posted ticket, to increase the visibility.
Hello Dirk,
could you please describe in more detail a way how to get this workaround working on Mars? Matt Biggs mentioned similar thing in bug report id=469581 but I don't know how to make it work.
I've created a class called MenuManagerHideProcessor with a patch from git. I don't know how to do second part (registration). I read Lars article about renderers at vogella page. (Eclipse4Renderer) and found a property "CUSTOM_RENDERER_URI". I did following in @AboutToShow method:
MDirectMenuItem directMenuItem = MMenuFactory.INSTANCE.createDirectMenuItem();
directMenuItem.getPersistedState().put("CUSTOM_RENDERER_URI", MENU_MANAGER_URI);
directMenuItem.setLabel(view.getLabel());
directMenuItem.setContributionURI(SHOW_HANDLER);
It seems that this is not the way how it should be done.
Thank You for any insights
PS: Sorry I couldn't post a direct links to bug tracker and vogella site because of "You can only use links to eclipse.org sites while you have fewer than 5 messages".

Problem with TLF - floating an inline image

I am running the latest version of Flash Builder 4 (4.0.1). The problem that I having:
When I use an InlineGraphicsElement if aTextFlow (in a RichEditableText component), if I set a value for the "float" attribute of an <img> element; the image is not visible. Without the float attribute, I see the image.
Is this a version problem with TLF? How do I know which version of TLF that I'm using? How do I install the correct version of TLF?
Thanks for the help.
 Oz
Some code fragments:
The TextFlow string with "float":
<div color="#444444" fontFamily="Times New Roman" fontSize="20" paragraphSpaceAfter="15" textIndent="10">
Alice, really, was beginning to get very tired of sitting by her sister on the bank, and of having nothing to do: once or twice she had peeped into the book her sister was reading, but it had no pictures or conversations in it, `and what is the use of a book,' thought Alice `without pictures or conversation?'

<img float="left" width="100" source="assets/library/alice/images/White Rabbit.png" height="100"/>
So she was considering in her own mind(as well as she could, for the hot day made her feel very sleepy and stupid), whether the pleasure of making a daisy-chain would be worth the trouble of getting up and picking the daisies, when suddenly a White Rabbit with pink eyes ran close by her.
</div>
Without "float":
<div color="#444444" fontFamily="Times New Roman" fontSize="20" paragraphSpaceAfter="15" textIndent="10">
Alice, really, was beginning to get very tired of sitting by her sister on the bank, and of having nothing to do: once or twice she had peeped into the book her sister was reading, but it had no pictures or conversations in it, `and what is the use of a book,' thought Alice `without pictures or conversation?'

<img width="100" source="assets/library/alice/images/White Rabbit.png" height="100"/>
So she was considering in her own mind(as well as she could, for the hot day made her feel very sleepy and stupid), whether the pleasure of making a daisy-chain would be worth the trouble of getting up and picking the daisies, when suddenly a White Rabbit with pink eyes ran close by her.
</div>
A bit of MXML code:
 <s:Group id="myGroup" width="100%" height="100%">
 <s:RichEditableText id="myRichText" lineBreak="toFit">
 </s:RichEditableText>
 
 </s:Group>
And some Actionscript that adds components:
 scroller = new SxScroller();
 scroller.dx = dxScroller;
 scroller.dy = dyScroller;
 scroller.addEventListener(FlexEvent.CREATION_COMPLETE,scrollerEvent);
 scroller.addEventListener(FlexEvent.UPDATE_COMPLETE,scrollerEvent);
 richText = scroller.richText;
 richText.editable = false; // textCharacter.enableEdit; // probably false. TODO: support true???
 richText.selectable = true; // required
 richText.width = dxRichText;
And finally the import of a TextFlow string:
richText.textFlow = TextFlowUtil.importFromString(textFlowString, WhiteSpaceCollapse.PRESERVE);

On the TextFlow forum I found the answer:
Use Flash Builder Hero, since it support TLF 2.0 out-of-the-box. The InlineGraphics support several valuable attributes, including float="left" etc.
Beautiful.

Problem with Assigning Policy button in Outlook 2010 and Exchange 2010

First of all, I'm posting here because I'm not sure how to post in the previous version of Exchange forums.
Secondly, I'm re-posting this from the Outlook forums as I'm not getting any responses there despite of views.
Hi,
I'm having an issue in Outlook 2010 where I can't assign personal policies to folders. I have setup personal tags and added the mailbox to the right policy. I have also ran Start-MangedFolderAssistant in Exchange 2010 Shell against the mailboxes.
When I go into OWA, everything shows up perfectly, I can right-click and assign policies at will, but when I open Outlook 2010 then the Assign Policy button never appears. I force added it to the ribbon and I can see from there that the button stays grayed
out irregardless of where I click in the folder structure. I have even assigned the mailbox user Owner rights to all the folders to see if it will make a difference.
If anyone can help me solve this problem I will very grateful, I'm pulling my hair out here and I'm certain I could just be missing something very obvious somewhere,
It might be worth mentioning that the company has been using .prf files to configure Outlook thus far, I'm
looking to eliminate that. I'm not sure if that will have any effect on my current problem.
Thanks for your time.
Nico

Thanks for the reply Max, that's a pretty good link.
Like is I said though, I have the policies all set up in the Exchange configuration side of things, when I use OWA all the options for applying tags appear. It's just in Outlook 2010 Standard that the Assign Policy button stays grayed out.
Thanks.
EDIT:
This has been solved, looks like version problem with Outlook.
http://office.microsoft.com/en-us/outlook-help/license-requirements-for-personal-archive-and-retention-policies-HA102576659.aspx

Problems with adding Library for a MySQL JDBC driver

Good day,
I am new with the JDeveloper package, so the following could be a user fault.
I found the following:
- I downloaded and installed Oracle JDeveloper 10.1.2.1.10 (latest version).
- I downloaded the latest JDBC drivers for MySQL. ( mysql-connector-java-3.1.10 )
Now, I did the following steps extracted from the link http://www.oracle.com/technology/products/jdev/tips/duff/mysql_and_oc4j3.html it should be quite easy to add the JDBC Drivers to the project.
I did the steps with the following results:
When I Edit the Project properties, follow Profiles -> Development -> Libraries
When I do ' New' , fill in at JS2E the value 'MySQL' and fill in the Class Path (in my case 'C:\javaInstalls\mysql-connector-java-3.1.10\mysql-connector-java-3.1.10-bin.jar').
In that case the [OK] is disabled. I should expect the [OK] button was enabled!
My question: Is this a bug? When not, what am I doing wrong!
Regards,
Mike

I tried it on an other system and had no problems with adding the libraries. It still is a problem on that particular system using the Dutch version of XP. The problem is that the Ok button stays disabled !
Could it bw a version problem with Java? How ever no changes are made to the original configuration, so it should pick up as default the java version of JDeveloper self.

OCCI version problem

Hi,
I am having a version problem with 9i.
How can i compile OCCI with 9i database installetion?
Which library would i need?
my server is a SOL-Sparc-64 machine
and oracle database server is installed there versiion oracle 9i 32bit.
I tried to compile but it gives me error like....
Undefined first referenced
symbol in file
main /usr/local/lib/gcc/sparc-sun-solaris2.9/3.4.2/crt1.o
__1cG__CrunKpure_error6F_v_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdbC__RTTI__1nDstdMlength_error__ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdMout_of_range2T6M_v_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2G6Mpkc_r1_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cG__CrunIex_alloc6FI_pv_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cG__CrunIex_throw6Fpvpkn0AQstatic_type_info_pF1_v_v_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2G6Mrk1_r1_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2t6MpkcIrkn0C__v_ /data/Indranil/prasenjit/clientlib/libocci.so
__1cH__rwstdRexcept_msg_string2t6MIE_v_ /data/Indranil/prasenjit/clientlib/libocci.so
Please tell me how to do it.
Edited by: user652233 on Oct 16, 2008 1:18 AM

Hello,
I am trying to compile my C++ code (using OCCI) on Sun Solaris 5.9 (SPARC64PLUS) environment.
We have compiled and tested it on RHEL 5 Linux.
The Oracle (10g R3) database is on RHEL 5 server while OCCI/C++ application would be running on Sun Solaris 5.9 server.
Since we have no Oracle installation on the Sun Solaris 5.9 server, there are no OCCI related libraries on this server and hence we are not able to compile our C++ code on Sun Solaris 5.9
Can someone help me on how/where to download OCCI libraries (compile time as well as run time) for Solaris 5.9 ? I could find only Windows and RHEL versions of OCCI libraries on the Oracle website.
Also, how stable is OCCI on Solaris 5.9 ?
Regards,

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
However, I can not get a AV chat working to a real user....
In response to your suggestions:-
I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
Internet sharing is off.
I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
Thanks again

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because

I have a problem with wifi in my iphone 4s, i already try everything and download latest version 7.1(11D167) but wifi switch is not working, its my humble request to Apple support team that pls resolve this problem as soon as possible because its a prestiage of Apple Company.
Pls inform me how can i resolve the problem of wifi.

You have to go to autherized iPhone agent.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

Problems with Itunes New Version?

Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0

There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

VC version 2 problems with invitation

Similar Messages

Maybe you are looking for