VD07 - Maintaining Reference Customer for consumer.

Dear All,
      One of my client needs to create a Consumer for which he needs to enter a reference customer.We maintain reference Customer in VD07.In VD07 we can maintain only one Customer as reference customer who shall be extended to all the Company Codes.But ,when my client is trying to save the consumer system is giving Posting Error.System is looking for the Reference customer in VD07 and picking the Company code which comes first in Alphabetical order and giving auth error.Please revert back with a solution on how to proceed .
Thanks in Advance.

Hi Jolly,
I understand that some "unwanted" sales area xyz assigned to the reference customer is to be removed and it is done. Thus henceforth the creation of consumers would not have the same copied to it. Now, we are worried about the reference of this sales area in transactions which might lead to inconsistancies, which I dont think would be a problem, unless the unwanted sales area is still part of the org model and not removed. If this was deleted, then the transactions would be referrring to non existing sales area which might be a problem.
Regards,
Venkat.

Similar Messages

  • How to maintain a customer for one sales office

    Dear All,
    One customer was assigned to more than 1 sales office. Due to this collection report which customized based on sales office was showing wrong data. We need to maintain only one sales office for one customer.
    If we change in master data all transactions done previously may change.So they ask to change in reference table and check the report.
    Tell me where can we find the reference table. How to maintain like above.
    Regards,
    Ganesh

    So they ask to change in reference table
    What do you mean by this ??  If you want to check what are all the changes made to a customer master, then check in XD04.
    thanks
    G. Lakshmipathi

  • How to extend customer for other slaes areas

    i want to extend  my custoemr  for other slaes area other than existing sales area .current slaes area is com div and com dis chl

    Hi Amit,
    Another Way is, as you have maintained the Customer for common DC and division, you can make referenece of other sales area with this by T-code VOR1 and VOR2, then the customer with common division and DC will be appllicable for all SALEs area.
    Hope this will help.
    Thanks,
    Raja

  • Attaching consumer to reference customer

    Hi,
    How do we creates a consumer and attach this consumer to reference customer???

    Originally Posted by mikebell90
    dariusz71 wrote:
    > Good Morning -
    >
    > I am working on a customers system, who I just migrated from NetWare to
    > Linux. When the customer creates a new email and wants to attach a
    > document reference to the email he/she is seeing all the docs in the
    > library, but when they try the same with an appointment the library is
    > empty.
    >
    > I don't see the rhyme or reason for this. Can anyone shine some light
    > on this for me. I do have an incident open with NTS.
    >
    >
    I can't think of a reason, but why not create a mail, attach ref, and
    then edit/change to appointment, complete the appointment and send.
    According to NTS, it's a defect that probably will not be fixed since it's a GroupWise 7 Client issue.

  • How can I restrict maintaining the same customer for different CC Areas?

    Hi All,
    I have a problem about maintaining customer credit limits via tcode FD32.
    User can maintain a customer in different credit control areas (CCA) and these CCAs are belong to different company codes.
    How can i restrict the user not to update another countries' credit limit?
    Your fast reply will be highly appreciated.
    Regards,
    Bilal

    Hi,
    I donu2019t think so there is any configuration for this kind of purpose.
    You can only do by the authorisation.
    Just give the user authorisation that only this person can change the value of the credit control area.
    And I think so that will be usefull also because if every body has authority then any body can change the limit which is not good.
    First they have to take permission from the authorised person and if he approved then only he should change limits.
    So just try out the user authorisation for your purpose.
    Regards
    Raj.

  • How to delete the  Reference customer in CRM ?? and what is the purpose for it ?

    what's is the purpose of using the  Reference customer in CRM  ?
    and can any one help me changing  the  Reference customer in CRM as i already assigned one and can't change it ??
    and how to use it .????.....
    thanks

    HI.
    Do you mean refresh the client ? if that is the case, i think you are posting in wrong forum since this one is for People Centric User Interface. Try in   Customer "Relationship Management (CRM) - General & Framework".
    Best Regards.
    Armando Rodriguez.

  • How to maintain change history for a custom field

    Hi All,
    I have added a new custom field in standard table FKKVKP by appending a new structure to FKKVKP. Now this custom field will appear in transaction CAA2. My requirement is I have to maintain change history for my custom field. In transaction SCDO I have seen that there is an object MKK_VKONT that maintains change history for FKKVKP entries. But I am not aware how to adjust this field so that SAP generates change history for my custom field as well.
    Thanks in advance,
    Venkat

    Venkatesh,
    DFKKTAXEX
    FKKVK
    FKKVKP
    FKKVK_CORR
    I have never used these tables but I have working experience with change docs.
    The Z field which you have added should be in the above structures, then you should be able to see that field in the changes.
    Of course change document should be set to that field-data element.

  • Maintain Reference Business Partner for Consumers

    hi all,
    i have Maintain Reference Business Partner for Consumers  through the spro ( t-code : CRMC_BUPA_CONSUM ) that I find it wrong in another day, so can i delete one of the field that i have mantained for a particular reference bus partner ? if i can...please show me how ? i read once i mantain ..i can not change it , is that true ?
    best regards
    indah puspita

    Hi Indah,
    If you are using version 5.0 try this,
    Start Transaction SE37. Create function module CRM_BUPA_CONSUMER_ADD_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes ( added sales area) to all consumers". Define the following import parameters:
    Parameter Name: IV_MAX_BLOCK_SIZE
    Type specification: TYPE
    Associated Type: I
    Default value: 100
    Optional: X
    Define the following table parameters:
    Parameter Name: IT_SALES_AREA
    Type specification: LIKE
    Associated type: BAPIBUS1006_SALES_AREA
    Parameter Name: ET_RETURN
    Type specification: LIKE
    Associated type: BAPIRET2
    Optional: X
    Save the changes.
    Create function module CRM_BUPA_CONSUMER_CHANGE_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes of a sales area to all consumers". Define the same parameters as for the above function module.
    save changes.
    Create report CRM_BUPA_REF_BP_ADAPT_CHANGES in package CRM_BUPA with Transaction SE38.
    Title: "Distribution of changes to reference business partner"
    Type: 1
    Status: P
    Package: CRM_BUPA
    Save the changes.
    Use Transaction SE38 to open report CRM_BUPA_REF_BP_ADAPT_CHANGES and maintain the following text symbols (menu: Goto -> Text elements -> Text symbols):
    For CRM Release 5.0, define additionally:
    010 Sales organization 20   50
    011 Distribution channel 12   50
    012 Line of business 6    50
    On the "Selection texts" tab page (menu path "Goto -> Text elements -> Selection texts"), maintain the following texts for the variables already defined:
    Name: GV_P1
    Text: New sales area
    Name: GV_P2
    Text: Changes to sales area
    Save and activate all changes.
    check the OSS notes 1014356 if the problem still persists.
    reward with points.
    cheers,
    MARK

  • Maintain customer for 300 20 01

    Hi,
    When I try to post the orders from status 64 for one of the customer, it is giving me the error saying 'Sold to party 1885 is not maintained for sales area 300 20 01'. Can you please help me resolve this. How should I maintain the customer 1885 for sales area 300 20 01.
    Thanks,
    Veni.

    Hi,
    GO to XK02 extend the customer to sales org/distribution channel/division..301 20 01
    Thanks
    Naren

  • Populate customer reference field for credit memo from RMA order

    There is requirement to populate customer reference field  for credit memo generated for RMA order..
    In RMA order which filed i need to populate which will come as customer reference in credit memo.
    Please help me  to populate customer reference field from RMA orderes

    Hi Javier,
    Please check following site:
    http://help.sap.com/saphelp_crm60/helpdata/en/2e/b0da18dbe84ed9bdff9a5d6d91f531/frameset.htm
    Cheers,
    Gun.

  • Error: Lock profile for approval procedure not maintained in Customizing

    Hi,
    We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
    Select an approval procedure first
    Lock profile for approval procedure not maintained in Customizing
    Approval procedure and approval steps are locked automatically
    This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
    Best Regards.

    Hi Karthik,
    Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval' 
    But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

  • How do we maintain diff price for same material diff customer

    Hi Experts,
    Wish you all a very happy new year 2010.
    Here is the question which I have for you..very elementary.
    I need to maintain different price for different customer for same material in the same sales area, for the same plant
    Can anyone let me know how to do it !!
    There are more than 10k customers for whom different price needs to be maintained.
    P.S: I tried to search in the forum a lot about this, but was not able to find one correct answer.
    Thanks and Regards
    Rohit Dujari

    Hello,
    You can take help of ABAPer to create a batch input session or you may use LSMW .  You can split these 10000 customers into some practicle numbers (group) depending on your policy.
    You may also explore rules for creating condition records which frankly i am not awareyou get a select rule tab on bottom side of screen when you go to  vk11/vk12
    Regards
    Vivek

  • How to maintain Authorized buyer for a customer in Sales Order.

    Dear all,
    We have a corporate customer, which has 10 authorized buyers. We have created a Customer number for this company.
    But at time of sales order creation, we need enter the authorized buyer name in sales order for the record purpose.
    we are not creating any authorized persons in the system.
    but our management want to see the person name who is buying behalf of the corporate customer.
    for that we need to prepare a report.
    I think SAP must be having a standard solution to address this requirement.
    I request you to help me to resolve this issue. Your suggestions will be highly appreciated.
    thank you
    Raghu Ram
    Edited by: Raghu Ram on Apr 21, 2008 8:24 AM

    HI,
    I think u want to create agent who is buying material on behalf of customer. For report purpose u can create commision agent in Partner det . procedure for this purpose.
    Thanks,
    Pramod

  • Maintain default custom vendor

    Dear all,
    I want to maintain default vendor for some custom condition type. In case of import PO, we maintain custom vendor at item level of PO in condition type. i want that vendor code should come automatically, i have not to maintain multiple time at the time of PO creation.
    Maintaining a default vendor code for all customs related condition type.
    Does anybody have idea regarding this..Please share your views.....

    Dear,
    At the time of creation of PO adopt the old PO and values all other details follows automatically. If you want to change in the PO you can change easily and new will not show any reference of the old PO.
    Hope this will solve your problem
    Thanks & regards
    Varun Bisaria

  • Requirement to maintain select-options for multiple fileds in webdynpro aba

    Hello Gurus,
    We have a requirement to maintain select-options for multiple fileds in webdynpro abap.
    now we are able to create select-options for a single field using wdr_select_options componet usage.
    how can we achive this select-options feature for multiple fields.
    Could anyone please suggest solutions?
    and if possible send me the sample code for this requirement.
    Thanks in Advance for your replies.
    Regards,
    Shyam

    Hi,
    Nothing different for more fields, same. some declaration changes.
    For example code i am using.. in WDDOINIT method.
    TYPES:
        fiscal_year TYPE RANGE OF GJAHR,
        S_KUNNR TYPE RANGE OF J_3RS_KUNNR,
        S_VKORG TYPE RANGE OF VKORG_RAN,
        status type PVWTY-RETPA,
        ty_r_date TYPE RANGE OF s_date,
        ty_s_date TYPE LINE OF ty_r_date.
    DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
      DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
    lo_cmp_usage =   wd_this->wd_cpuse_cmp_sel_opt( ).
      IF lo_cmp_usage->has_active_component( ) IS INITIAL.
      lo_cmp_usage->create_component( ).
    ENDIF.
    * Reference variable used instantiate the select-options component
      DATA
        lr_cmp_usage TYPE REF TO if_wd_component_usage.
    * Variables used to create the select-options fields and
    * define its initial values
      DATA:
        lr_field TYPE REF TO data,
        ls_date  TYPE ty_s_date.
      FIELD-SYMBOLS:
        <fs_field> TYPE ANY,
        <fs_range> TYPE INDEX TABLE.
    * Instantiate the select-options component
      lr_cmp_usage = wd_this->wd_cpuse_cmp_sel_opt( ).
      IF lr_cmp_usage->has_active_component( ) IS INITIAL.
        lr_cmp_usage->create_component( ).
      ENDIF.
      lo_interfacecontroller =   wd_this->wd_cpifc_cmp_sel_opt( ).
    wd_this->m_sel_opt = lo_interfacecontroller->init_selection_screen( ).
    data : vhelp type wdy_md_value_help_mode_enum .
    * Sets the helper reference
      wd_this->m_sel_opt1 = wd_this->wd_cpifc_cmp_sel_opt( ).
      wd_this->m_helper  = wd_this->m_sel_opt1->init_selection_screen( ).
    * Hide the standard select-options components.
      wd_this->m_helper->set_global_options(
        i_display_btn_cancel = abap_false
        i_display_btn_check  = abap_false
        i_display_btn_reset  = abap_false
        i_display_btn_execute  = abap_false
      lr_field = wd_this->m_helper->create_range_table( `KUNNR` ).
      wd_this->m_helper->add_selection_field(
        i_id           = `KUNNR`
        I_DESCRIPTION  = 'Customer Code'
    *    i_within_block = `BL01`
        it_result      = lr_field ).
      FREE lr_field.
      lr_field = wd_this->m_helper->create_range_table( `VKORG` ).
      wd_this->m_helper->add_selection_field(
        i_id           = `VKORG`
        I_DESCRIPTION  = 'Sales Organization'
    *    i_within_block = `BL01`
        it_result      = lr_field ).
      FREE lr_field.
    Go through this..
    http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproABAP-Complexselect-optionscomponent+usages
    Cheers,
    Kris.

Maybe you are looking for