VDI 3 EA: not able to put the VMs in a directory

Hi all,
I created a new pool, but all the VMs appear in the top level of my ESX server. I would like to get them organized in dirctories.
How can this be done?
Regards,
Wouter

Hi Wouter,
Each pool has its own folder, which is in the SUN VDI folder under the Datacenter. This is where the cloned VMs are placed. (If you import a VM it stays its the original location.)
Is it possible you are in the wrong view in the VI client? The folder structure only shows up the Virtual Machine and Templates view, the Hosts and Clusters view only lists the VMs.
Sarah

Similar Messages

  • My Iphone 5 voice speaker is not working.I'm not able to hear the voice of the person calling.But when I put my iphone 5 on speaker mode, things seem ok.Please provide me some suggestions.

    My Iphone 5 voice speaker is not working.I'm not able to hear the voice of the person calling.But when I put my iphone 5 on speaker mode, things seem ok.Please provide me some suggestions.

    Hello rizvijunaid,
    Thank you for providing the details of the issue you are experiencing with calls on your iPhone.  I recommend following the steps in the article below for the issue you described:
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Not able to see the tree on the jspx page after running

    Hi All,
    This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
    After running the jspx when I am moving to the fragment I am not able to see the tree.
    However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
    Can anybody put some thoughts on this.
    Thanx
    Kanika

    Thnx for your replies..
    I am dropping taskflow as region . I am not using the switcher component.
    On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
    Please advice how to accompolish this now??

  • The problem here is i am not able to get the data from the list

    hi all,
    i have the following code
    EnrichedProductCatalogue enrichedProductCatalogue1 = new EnrichedProductCatalogue();
    enrichedProductCatalogue1.setAssetCount(2);
    enrichedProductCatalogue1.setBlockingProduct("Weekend Freebee");
    enrichedProductCatalogue1.setBlockingReason("Compatability");
    ArrayList<String> availableActionsList = new ArrayList<String>();
    availableActionsList.add(EnrichedProductConstants.ADD.toString());
    availableActionsList.add(EnrichedProductConstants.REMOVE.toString());
    enrichedProductCatalogue1.setAvailaibleActions((ArrayList<String>)availableActionsList);
    BundleProduct bundleProduct = null;
    Product product = new Product();
    product = new Product();
    product.setProductName("International");
    product.setProductClassName("International");
    ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
    UiCategory uiCategory1 = new UiCategory();
    uiCategory1.setCategoryName("Simply");
    UiCategory uiCategory2 = new UiCategory();
    uiCategory2.setCategoryName("Freebees");
    uiCategory.add(uiCategory1);
    uiCategory.add(uiCategory2);
    product.setUiCategory(uiCategory);
    bundleProduct = new BundleProduct();
    bundleProduct.setCommercialProduct(product);
    enrichedProductCatalogue1.setBundleProduct(bundleProduct);
    listOfEnrichProducts.add(enrichedProductCatalogue1);
    listOfEnrichProducts.add(enrichedProductCatalogue1);
    here i have an list called listOfEnrichProducts.
    here i am adding two objects of enrichedProductCatalogue.
    which contains a object called BundleProduct.
    which has a reference for Product class.
    here this product class has a list which contains objects of another class called UiCategory.
    the problem here is i am not able to get the data from the list which contains UiCategory objects .
    the following is the UI
    <af:table var="row" rowBandingInterval="0" id="t1"
    value="#{pageFlowScope.sample1}"
    binding="#{pageFlowScope.sampleManagedBean.dataTable}"
    partialTriggers="apimethods ::apimethods">
    <af:column sortable="false" headerText="ProductName" id="c2">
    <af:outputText value="#{row.bundleProduct.commercialProduct.productName}" id="ot15"/>
    </af:column>
    <af:column sortable="false" headerText="ProductClass" id="c12">
    <af:outputText value="#{row.bundleProduct.commercialProduct.productClassName}" id="ot19"/>
    </af:column>
    <!--
    <af:column sortable="false" headerText="UICategoryName" id="c32">
    <af:forEach var="item" items="#{row.bundleProduct.commercialProduct.uiCategory}" >
    <af:outputText value="#{item.categoryName}" id="ot119"/>
    </af:forEach>
    </af:column>
    -->
    <af:column sortable="false" headerText="AssetCount" id="c22">
    <af:outputText value="#{row.assetCount}" id="ot1"/>
    </af:column>
    <af:column sortable="false" headerText="blockingReason" id="c3">
    <af:outputText value="#{row.blockingReason}" id="ot2"/>
    </af:column>
    <af:column sortable="false" headerText="blockingProduct" id="c4">
    <af:outputText value="#{row.blockingProduct}" id="ot3"/>
    </af:column>
    <!--<af:column sortable="false" headerText="availaibleActions" id="c1">
    <af:commandButton text="#{row.availaibleActions}" id="cb1"
    actionListener="#{pageFlowScope.sampleManagedBean.callAction}"
    partialSubmit="true">
    <af:setPropertyListener from="#{row.availaibleActions}"
    to="#{pageFlowScope.avalibleaction}" type="action"/>
    </af:commandButton>
    </af:column>-->
    </af:table>
    Can anyone pls give some solution ...

    Hi Frank,
    value="#{pageFlowScope.sample1}"
    here sample is
    Map<String, Object> flowScope1 =
    ADFContext.getCurrent().getPageFlowScope();
    flowScope.put("sample1", listOfEnrichProducts);
    this is not the problem . i am able to get all the values except the following .
    ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
    UiCategory uiCategory1 = new UiCategory();
    uiCategory1.setCategoryName("Simply");
    UiCategory uiCategory2 = new UiCategory();
    uiCategory2.setCategoryName("Freebees");
    uiCategory.add(uiCategory1);
    uiCategory.add(uiCategory2);
    product.setUiCategory(uiCategory);

  • Not able to get the message from Queue using MQ adapter

    HI
    Using Mq adapter am able to put the message in a queue and am able to get the message if i select the schema type as opaque, but am not able to get the message if i specify any schema type and am getting timed out exception.
    Kindly help to proceed with this issue.

    Hi,
    Am also facing the same issue.
    I would be thankful if anyone can provide the solution

  • Not able to get the full screen in Youtube with latest firefox

    Hi All,
      I was using the FF 3.0.10 came with ArchLinux pacman. Recenty I downloaded the latest FF from mozilla website and put that in /opt/firefox. I am able to do all other things in it except watching the full screen flash video from Youtube. The browser stucks when I click on the full screen option. But that is working fine in the old browser ( Gran paradiso ). I am not able to find the root cause of it. An idea ?

    silvik wrote:launch firefox with: LD_PRELOAD=/usr/lib/libGL.so.1 firefox
    Yes that helped, thanks.
    But it only happened with youtube flash movies, others were able to go fullscreen.
    I got the following error messages in the console after the crash (cut off):
    LoadPlugin: failed to initialize shared library /home/andi/.mozilla/plugins/libmks.so [libexpat.so.0: cannot open shared object file: No such file or directory]                                                                           
    *** glibc detected *** firefox: munmap_chunk(): invalid pointer: 0xa8398020 ***                                                                                                                                                             
    ======= Backtrace: =========                                                                                                                                                                                                               
    /lib/libc.so.6[0xb7cbd281]                                                                                                                                                                                                                 
    /lib/libc.so.6[0xb7cbe4b5]                                                                                                                                                                                                                 
    /usr/lib/libGL.so.1[0xaa912205]                                                                                                                                                                                                             
    ======= Memory map: ========                                                                                                                                                                                                               
    08048000-0805a000 r-xp 00000000 08:02 136715     /usr/lib/firefox-3.5/firefox                                                                                                                                                               
    0805a000-0805b000 rwxp 00011000 08:02 136715     /usr/lib/firefox-3.5/firefox                                                                                                                                                               
    0805b000-0805c000 rwxp 00000000 00:00 0                                                                                                                                                                                                     
    a419b000-a4f06000 r-xp 00000000 08:02 176929     /usr/lib/libGLcore.so.185.18.14                                                                                                                                                           
    a4f06000-a50f3000 rwxp 00d6a000 08:02 176929     /usr/lib/libGLcore.so.185.18.14   

  • PI is not able to pick the file from the FTP folder

    This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
    PI Adapter Log:
    An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
    Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
    FTP Log:
    (207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  MDTM
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  REST STREAM
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  SIZE
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  MLST type*;size*;modify*;
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  MLSD
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  AUTH SSL
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  AUTH TLS
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  PROT
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  PBSZ
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  UTF8
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  CLNT
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)>  MFMT
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
    (207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
    It should list  *TLOG.txt*  but instead it is trying to get into a directory named  *TLOG.txt*.  same for other interface.
    So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

    Hi Sisir
    The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
    Sisir Das wrote:
    "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
    (207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
    Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
    By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&amp;T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • Not able to reset the page number in XML Publisher based on each PO

    Not able to reset the page number in XML Publisher based on PO
    Hi,
    I have created a custom purchase report and rtf template. In the rtf template, I have added the page number feature (i.e. Page 1 of 5) from Word in the template. When I run the report for a range of POs, I expect the results as follows:
    I have given 3 POs on single request. (PO#1 has 3 pages, PO#2 has 2 pages and PO#3 has 4 pages), the page number on each PO should look like as follows:
    PO#1 page 1 of 3, page 2 of 3, page 3 of 3
    PO#2 page 1 of 2 page 2 of 2
    PO#3 page 1 of 4, page 2 of 4, page 3 of 4 and page 4 of 4
    But the page number displays on each PO as follows:
    PO#1 page 1 of 9, page 2 of 9, page 3 of 9
    PO#2 page 4 of 9 page 5 of 9
    PO#3 page 6 of 9, page 7 of 9, page 8 of 9 and page 9 of 9
    Here I have to reset the page number based on each PO. If anyone done this already, can you please share with me.
    Thanks,
    Ram.

    Hi
    One clarification please.
    Are you putting Page # of ## in the for-loop section? I mean it should be within For-each@section block.
    Even if this doesn;t work, then try using Insert->Page Break after every PO.
    Regards
    Varun

  • BI Publisher: not able to see the xml data after creating a data model

    I am learning BI publisher and trying to create a report data model
    I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
    I am getting unexpected exception, not able to see the XML view .
    in the server console i got servlet exception, here is one of the line
    com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
    Edited by: joysaha123 on Mar 17, 2010 6:07 PM

    Hi karthik
    Thanks for your response
    Actually iam a beginner in java coding hence struggling to come up with the things
    I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
    actually the same program i wrote in java
    and the same method i was calling from the main
    and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
    and the printing takes place
    but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
    the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
    and this creating problem , had it returned XmlDocument
    i would have printed the elements one one
    but as it is returning deferredimpl
    iam unable to print the elements
    could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
    in servlets but in plain java pogram it is returing XmlDocument
    Thanks
    Bhanu

  • Not able to see the PSA

    Dear Experts,
    I have enhanced the extract structure of  2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
    I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
    After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
    Please help me out.
    When i manage on the data source to c PSA, its giving error like this
    Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
    The Dump when activating the data source is :
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          03.06.2009 09:46:55
    How to correct the error
         Use an ABAP/4 Open SQL array insert only if you are sure that none of
         the records passed already exists in the database.
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
         "CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
         "_UPDATE_DIRECTORY_TABLES"
         If you cannot solve the problem yourself and want to send an error
         notification to SAP, include the following information:
         1. The description of the current problem (short dump)
            To save the description, choose "System->List->Save->Local File
         (Unconverted)".
         2. Corresponding system log
            Display the system log by calling transaction SM21.
            Restrict the time interval to 10 minutes before and five minutes
         after the short dump. Then choose "System->List->Save->Local File
         (Unconverted)".
         3. If the problem occurs in a problem of your own or a modified SAP
         program: The source code of the program
    Regards
    venu

    Hi Venu,
    The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
    ..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
       75 * Put the fields of PSA to database without check, otherwise error by
       76 * activation of table
       77
       78   IF p_psa_exists EQ rs_c_false OR
       79      i_new_version     EQ rs_c_true.
    >>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
       81   ELSE.
       82     DELETE FROM rstsodsfield
       83       WHERE odsname = l_s_odsfield-odsname
       84       AND  version = l_s_odsfield-version.
       85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
    Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
    We faced the same issue and resolved it this way.
    Thanks
    -Saif

  • Not able to put reason for rejection at sales order level.

    Hi Gurus,
    I have an issue where I am not able to put reason for rejection for line item in sales order. It gives error as please delete the follow on document purchase order line item number 10. I have already deleted the line item in purchase order. Then tried but did not work. Tried by deleting the purchase requision item also but it did not work.
    Tried to undelete the item from PO and then again tried to put reason for rejection but it could no worked out. 
    Please guide me what can be the solution.
    Regards
    Vinod

    As far a I understand you created PO for line item
    So first check whether GR is reversed or not for PO
    Then mark this line item for deletion in PO and then in PR
    Check if you have created any billing document for PO if so reversed that invoice
    Also check if you have created any delivery for the Line item in sales order if yes then reversed the same
    If you have Sales order related Billing, and if you have done billing reverse the same
    If you have Delivery related Billing, and if you have done billing reverse the same
    After reversing all docuemnts created for Sales order then only try to reject the line item
    You can check table VBFA for document flow

  • I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages).....  Do the following have free copyright

    I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
    The question I need answered is ( and not able to find the answer on any of you help pages).....
    Do the following have free copyright to publish on facebook and U Tube?
    1.Garage band sounds?
    2.Slide show...Sample music and Theme music?
    3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
    I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
    It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
    I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

    Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

  • Not able to put data selection condition in data selection tab of infopakag

    I was loading data from data source as data mart ( export data sauce from ODS) to other ODS.
    when I tried to do delta Initialization with data transfer , I am not able to put data selection condition in data selection tab of infopakage.
    when I choose Full Update in Update tab . It enables data selection fields in data selection tab. and I could put the condition.
    I have checked in transfer structure as well , the fields are marked for selection.
    Please advice .
    Please tell me what could be the reason for this problem

    Ashutosh,
    As you are doing delta upload the data selection tab will be disabled, if you want to do the selective load then you need to do init update with your selection.
    When you do the full updtae then definitely the data selection tab will be enabled for all the objects.
    Hope this helps...
    *******Assign Points if it helps********
    Thanks,
    Gattu

  • Weblogic Classpath setting error not able to pick the properties file

    Hi All,
    We are using a third party jar and create a java Web service on the top of that jar. This jar file need two configuration file .properties and .xml when we deploy war for the application into weblogic server it will give file not found error. Though this file already exists inside the .war but from the application it is not able to pick the files.
    We find that these file need to be put in weblogic domain home and we put it there and application works.
    I decompile the jar and found that inside java class they use FileReader("allXXX.xml") path and when I Google it and found that it will pick the file from weblogic domain directory.
    The issue is that we need to put properties file in specific weblogic folder like /3party/config by setting the class path inside startWebLogic.cmd. Please let us know solution for same
    Thanks in advance
    Edited by: sb**** on Mar 19, 2012 9:08 AM

    Hi , I am also facing the similer issue. I am deploying war file of my Spring MVC application , but its not picking resource bundle .properties files from one of the configuration file.
    <bean id="PropertiesRepository"
              class="LanguageBasedPropertiesRepository">
              <property name="propertiesFiles">
                   <map>
                        <entry key="en" value="classpath:/exceptionMessages.properties" />
                        <entry key="es" value="classpath:/exceptionMessages_es.properties" />
                        <entry key="default" value="classpath:/exceptionMessages.properties" />
                   </map>
              </property>
         </bean>
    Please let me know how we can modify this to make it work.
    thanks .

Maybe you are looking for

  • Get balance of vendor/Customer .........

    Hi all,    I have problems, hope your help. That is, My select option screen : PARAMETERS: P_BUKRS LIKE T001-BUKRS OBLIGATORY DEFAULT '1000'.            "Company code SELECTION-SCREEN SKIP. SELECTION-SCREEN: BEGIN OF BLOCK BLOCK01 WITH FRAME TITLE TE

  • Problems syncing on pc when first synced with mac

    Hey everyone, I have sort of a unique problem. I went through 3 phones before they worked and now that it is working it is an unbelievable experience. However, I do have one issue. I was able to sync a few albums through itunes but I had to sync my w

  • Mac OS 10.3 install cd.

    hey,I cannot boot my install cd1 - even if I insert it as im logged in,then it asks me to restart the computer - but when restarted,I get the gray apple and the spinning wheel and freezes. thanks a lot ! regards,tom

  • All of a sudden LR won't render larger preview.

    Today after using LR sucessfully for some time it won't render larger previews, in the library mode, of images in my catalog which were downloaded by another computer. The images turn extreemly blurry and will not come out of it. I restarted windows

  • Urgent help on installation ECC for forms

    Hi , I am in new a cutomer site on upgrade to ECC. I have the functionality of Interactive forms to be incorpoarated Can I ask them for WAS ABAP stack alone or should I have both ABAP and Java Stack .. Regards Abhilash