Vendor 27672 has not been created for company code 6200

Hai,
I am trying to post a invoice against a Scheduling agreement.
The scheduling agreement has vendor as 27672 and comapny code as 6200 in the header data when i look into ME33L.
When i trying to post an invoice fo the schedulig agreement using BAPI_INCOMINGINVOICE_CREATE , it is thowing the error "Vendor 27672 has not been created for company code 6200". which i am not able to resolve, as the scheduling agreement is raised against that vendor.
when i tried to post the invoice manually using MIRO, there was a POP-UP saying there " PO vendor is not an invoiceing party. enter the invoicing party." where i was giving 27673 which is the alternate payee for this vendor. It is accepting and i could post the invoice succesfully.
However, the same is not available in the BAPI_INCOMINGINVOICE_CREATE that i am using.
Is there any way that i can enter the Invoicing party as i did it when i was posting it manually or is there any other way that i can resolve the issue.
Thanks,
Upender

Hi
Go to XD01 and enter the same customer code that you have now and enter the required company code and sales org, dist. chnl and division and enter the required details and save.
Regards
Madhu
Edited by: Madhu Naidu on Sep 19, 2011 6:46 AM

Similar Messages

Run AFAB, Error Msg: Depreciation area 00 has not been defined in company

Hi,Dear all,
My SAP System is ECC5.0 ,this is a new system , now i work client is 800,i configure img
complete, i used t-code AS91 to upload some asset records. when i use t-code AFAB to run
depreciation , the system show error message ,the errot msg as follows:
Contact your system administrator (table error)
Message no. AA833
Diagnosis
Depreciation area 00 has not been defined in company code 1670.
Procedure
Define the depreciation area using the Customizing menu.
i was suspicious of the asset records have some mistake ,so i reset company code in fixed
asset , and i reload the asset records ,when rerun AFAB ,it show the same mistake message
AA833 again.
then ,i copy the client 800 to client 500, and reload the asset records in client 500 ,run AFAB ,the also
show the same message !!
by the way ,i upload records use LSMW ,
I don't know the reason ,
what shall i do ?
expert,
can you give me a solution ?
Thanks

Hi,
u have to assign depre area to ur company code..
Please check.. you have to done step as following
1. Copy Reference Chart of Depreciation/Depreciation Areas (Asset accounting -> organization structures -> Copy Reference Chart of Depreciation/Depreciation Areas)
2. Assign Chart of Depreciation to Company Code(OAOB)
3. Define Depreciation Areas for Foreign Currencies(OAYH)
4. How depreciation areas post to the general ledger(Customizing FI-AA > Integration with the General Ledger > Define How Depreciation Areas Post to General Ledger)
5. Specify Financial Statement Version for Asset Reports(OAYN)
Hope this help.
Regards.
Message was edited by:
        Bird

AFAB, Error Message Depreciation area 00 has not been defined in company co

Hi,Dear all,
My SAP System is ECC5.0 ,this is a new system , now i work client is 800,i configure img
complete, i used t-code AS91 to upload some asset records. when i use t-code AFAB to run
depreciation , the system show error message ,the errot msg as follows:
Contact your system administrator (table error)
Message no. AA833
Diagnosis
Depreciation area 00 has not been defined in company code 1670.
Procedure
Define the depreciation area using the Customizing menu.
i was suspicious of the asset records have some mistake ,so i reset company code in fixed
asset , and i reload the asset records ,when rerun AFAB ,it show the same mistake message
AA833 again.
then ,i copy the client 800 to client 500, and reload the asset records in client 500 ,run AFAB ,the also
show the same message !!
by the way ,i upload records use LSMW ,
I don't know the reason ,
what shall i do ?
expert,
can you give me a solution ?
Thanks

Hi,
u have to assign depre area to ur company code..
Please check.. you have to done step as following
1. Copy Reference Chart of Depreciation/Depreciation Areas (Asset accounting -> organization structures -> Copy Reference Chart of Depreciation/Depreciation Areas)
2. Assign Chart of Depreciation to Company Code(OAOB)
3. Define Depreciation Areas for Foreign Currencies(OAYH)
4. How depreciation areas post to the general ledger(Customizing FI-AA > Integration with the General Ledger > Define How Depreciation Areas Post to General Ledger)
5. Specify Financial Statement Version for Asset Reports(OAYN)
Hope this help.
Regards.
Message was edited by:
        Bird

A unique company code has not been assigned to company number 1000

Dear Friends,
When I do Inter-Company Transaction thro Transaction Code FB60 it is giving me Error.
For Example: if I have 2 Company Codes - 8001 & 8002
I want to Post One Vendor Invoice
Ex:
Vendor - 301 ABC Ltd., 5000 Credit
400020 - Expenses 2000 Debit - Company Code - NGLC
(Then Debit Expenses G/L Account 460000 for Company Code NGLC1)
400020 - Expenses 3000 Debit - Company Code - 1000
(Then Debit Expenses G/L Account 460100 for Company Code 1000)
When I am going to POST it is giving me an Error please sees below.
Error Message
A unique company code has not been assigned to company number 1000
Message no. GLT0001
Diagnosis
Document breakdown is active in your system. In certain cases, a company code is derived from the company ID number, and this must lead to the assignment of a unique company code.
A unique company code could not be assigned to company number 1000.
System Response
You cannot carry out the required posting.
Procedure
Assign one company code to company number 1000.
Please tell me How to solve this issue.
Thanks in Advance,
Ranga

Hi Ranga
Can you please check OBY6 settings (Additional details) for the co. codes, as it seems either multiple co. codes have been assinged to company number 1000 or none of the relevant co. codes have been assigned with company ID.
Regards

Service Desk: Basis Message has not been created

Hi Experts
After applying the laster patches on our SolMan (CRM Component) the Service Desk is not working properly.
When creating a ticket with TA NOTIF_CREATE the error message pops up:
Message 000000XXXX created in <SID> with the following error: Basis message has not been created.
We use the standard Notification types. Like SLFN and SLF1 (For ABA message)
In TA DNO_CUST01 there is the standard config. activ also standard Action Profile: SLFN0001_STANDARD_DNO
Number Range: 01
Application: DNO_NOTIF
In TA DNO_CUST04: PROCESS_TYPE: SLFN, RFCDEST_SOL_MANAGER: NONE
The ticket is available in the monitor TA, but the ABA Message is missing. All the details concerning the satellite System is missing too and can also not be maintained manually.
If someone has had this problem as well, I would be very interested to hear the solution.
Thank you very much for your help.
Dominik

Hello Dominik,
so log is red right like you have an error ?
I don t understand why you have this log though cause this message is 060 from class 'DNO'. And there is only 4 function calls that launch error with parameter you re facing (I_PARN) that concerns partners (actors of your ticket) !
And when putting a breakpoint in these 4 function calls and retesting; Solman, at least mine does nt go in any one of them.
You can maybe do the test on your side. The 4 function moduls are (tr SE37, first line each time)
DNO_DB_EX_PAR_USER_CHECK
DNO_DB_EX_PAR_USER_DISP
DNO_DB_EX_PAR_ADDR_CHECK
DNO_DB_EX_PAR_ADDR_DISP
Please put a break point in each one of them and launch transaction crmd_order again and retest.
Could you please confirm that Solman goes there and that parameter i_parn is actually empty...?
Regards
Khalil
Edited by: Khalil SERRHINI on Aug 2, 2010 3:08 PM

U2018Ea unit of measure has not been created in the language ES u2018in srm

Dear Friends,
I have checked in ECC & SRM in table T006A (UOM languages). UOM "EA" is defined in ES (Spanish).
Also in comm_hierarchy also i chked for product category language maintenance and found maintained in EN,ES languages.
u2018Ea unit of measure has not been created in the language ES u2018
I have tried with sapanish (international sort,dominic,traditional sort)& rest of spanish spoken country languages but i am getting the same error.( IE- tools-general-languages & refreshed the page). u2018Ea unit of measure has not been created in the language ES u2018
Regards,
William

Hi Willam,
When are you getting this error ? i.e. while creation of shopping cart or process purchase order..
I believe this issue is due to creation of UOM..which means EA UOM should be created with EA language.
For further details please have a look on
http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP
where they have specified that "Maintain UOM in different languages by logging to the system with different logon language"
Kindly confirm.
Thanks
Rajesh K

Goods issue has not been posted for delivery

HI Experts,
When my user creating the billing he is getting the problemu201Dgoods issue has not been posted for deliveryu201D.
I investigated and found that in delivery qty for line item 10 (delivery qty is 1 and picking qty is 0) he is not maintained a picking quantity. I asked the user to maintain this. But when he uses the transaction code vl02n he is not able to change the picking quantity from 0 to1 why because the screen is grey mode and one more thing he is not able to cancel the u201CPGIu201D.
Can any body let me know how to pick a qty in delivery what configuration I have to check .
Regards,
Sunina A

Hello,
As picking is not activated in the screen, thenyou need to go for a Transfer order Go to VL02N --> subsequent functions --> Create trnasfer order. The system will take you to create transfer order screen (LT03). Save it. Check the delivery whether the pick quantity has been updated ord not? If not then go for confirming the transfer order by transaction LT12. The picking quanity will be picked up. Now proceed with PGI.
Prase

G/L Account has not been assigned for PONHLD customisation

Dear All,
I am getting an error while creating Excise Invoice, when I'm choosing the Choose Balance Tab in J1IIN, system is throwing an error message, "G/L Account has not been assigned for PONHLD customisation."
Can anybody help me,pls or if you can advise that should this tab be selected before processing any further with J1IIN?
Rgds,
Indrajit

Dear Hase,
Please to Revert the solution which you got. Because same Problem I am facing. I have done all the LG Tax setting. If you give in details i will be very much thankful....
Waiting...
SPT

Unique company code has not been assigned to company number

Dear Experts,
When I am posting the customer advance amount in FBCJ I am getting the below mentioned error.
Unique company code has not been assigned to company number
Message no. GLT0001
Diagnosis
Document breakdown is active in your system. In certain cases, a company code is derived from the company ID number, and this must lead to the assignment of a unique company code.
A unique company code could not be assigned to company number .
System Response
You cannot carry out the required posting.
Procedure
Assign one company code to company number .
Did I miss any config settings.
Thanks in advance,
Regards
Aswin

Hi,
We faced the same issue and we managed to solve it thanks to SAP Support assistance. The system at the time of posting is looking for a value in the Field "Trading Partner" in the FBCJ Transaction code. That field is required because the item is like a Company Code clearing therefore if the field is not filled it cannot determine the Company code during posting.
To solve this you have two approaches:
To treat each Cash journal separately you need to Fill the Trading Partner field individually in the FBCJ with the respective value. Select the same Trading Partner as your original company code (even if you select other company code you cannot post Inter company through FBCJ).
Go to FS01/FS02 of the particular account you face this issue and define a Trading Partner in the Type/Description Tab under Consolidation data in Chart of accounts. With this way the Trading Partner will apply for all postings concerning that particular GL Account and there will be no need for the first approach described above.
I hope this helps.
Regards,
Athos Kyriakides

Profit center 1000001 has not been created in controlling area S100

Hi All,
I am creating cost center in ks01, but system showing an error, which is - Profit center 1000001 has not been created in controlling area S100.
I confirm this error by cross checking in tcode ke53. On the top of the screen controlling is mentioned S100, but when i trying to assign profit center to cost center system is showing an error.
Please help me to know the reason of this error & how to resolve this error, so that i can create the cost center.
Early reply would be appreciated.
Thanks in advance.
Thanks & Regards,
Prafful Kansal

Thanks for ur kind help.
Regards,
Prafful Kansal

Error - GL account has not been assigned for CLEAR in customization

Hi
We are working on ECC 6.0.
When we try to create Excise Invoice through J1IS for Ref doc Type MATD for Material Doc of 122 Movement Type we are getting the following error - "GL account has not been assigned for CLEAR in customisation"
Can anyone help that for which Excise Transaction Type (ETT), the GL account has to be assigned under GL Accounts per Excise Transaction.
Regards
Kapil

Hi,
Maintain the ETT for CIEV - CANCELLATION OF EXCISE INVOICE in following customizing
IMG > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction
Regards,
Jigar

The required index has not been created yet in the search engine

Hi,
I am trying to change the inspection plan trying to add master insp.characterstics in QP02 the system is giving the following error: "The required index has not been created yet in the search engine". As per the solution for that error The administration transaction is SES_ADMIN.
Through the Goto menu, you can enter the relevant customizing directly.
The index was required for: Business object = QPMK
Object type = 1
It is already there. I don't know why still it is showing the error.
How can i fix this?
Pl help me. Thanks.
Madhu

Hi,
Not so sure this applies as
1] The field is using a custom search help which correctly appears for data selection in each case. Its only when we push the go button that the index missing error ishappening for the particular user.
2] We cloned the user id for the user having the issue and the clone has no problem at all using the search help.
Weird huh?
Ross

I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months a year. So, if I have Icloud for my calendar, and turn on a computer that has not been used for 6 months, does all the old information on that computer to go Icloud?

I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months each year. When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud? Does Icloud push all the new calendar and contact items over the old items?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

GL account has not been assigned for in customization

GL account has not been assigned for in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types

Hello ,
SPRO --. LOGISTICS GENERAL -. TAX ON GOODS MOVMENT -
> India -
. Act determination -
> 1) Define GL ACTS
2) Define Act types for T. COde
3) Define GL Act For Transaction and excise Groups
This settings are done by the Fi consultant.
FOr the Transaction Type DLFC you got to define the various debit and credit accounts.
Also in the nest transaction you got to assign the various GL acounts for the Transaction type DLFC :
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types
thanks
deepak

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

Vendor 27672 has not been created for company code 6200

Similar Messages

Maybe you are looking for