Goods issue has not been posted for delivery

HI Experts,
When my user creating the billing he is getting the problemu201Dgoods issue has not been posted for deliveryu201D.
I investigated and found that in delivery qty for line item 10 (delivery qty is 1 and picking qty is 0) he is not maintained a picking quantity. I asked the user to maintain this. But when he uses the transaction code vl02n he is not able to change the picking quantity from 0 to1 why because the screen is grey mode and one more thing he is not able to cancel the u201CPGIu201D.
Can any body let me know how to pick a qty in delivery what configuration I have to check .
Regards,
Sunina A

Hello,
As picking is not activated in the screen, thenyou need to go for a Transfer order Go to VL02N --> subsequent functions --> Create trnasfer order. The system will take you to create transfer order screen (LT03). Save it. Check the delivery whether the pick quantity has been updated ord not? If not then go for confirming the transfer order by transaction LT12. The picking quanity will be picked up. Now proceed with PGI.
Prase

Similar Messages

  • Goods receipt for purchase assignments has not been posted

    Hi all;
    In Vl02n in goods issue steps i have a message "Goods receipt for purchase assignments has not been posted"
    -the purchas order is assined to items delivery correctelly!
    -in our case, we haven't a stock.
    -after goods issue in vl02n we have tow goods mvt (101 for goods receipt) and (601 for goods issue) for the same quantity.
    so can you tell me how to solve this problem
    thx

    ok sir ;
    No i don't talke abouat STP i don't have any transit stock it's a simpl sales based on global purchas
    -first with me21n i created global purchas order
    -the sales will be picked from this purchas .
    -delivery is assigned automatically to this purchas order  with user exit.
    -with vl02n in goods issue steps there is tow operations ( stock mvt 101 in purchas assignement and a normal 601 for delivery )

  • Goods receipt for purchase assignments has not been posted. Mes. no. O1573

    Dear expert,
    I got a proplem with Intercompany STO as detail below:
    Goods receipt for purchase assignments has not been posted.
    Message no. O1573
    Diagnosis
    Certain fields needed for posting Goods Receipt have not been entered.
    System Response
    The goods receipt for Purchase Assignment was not posted.
    Procedure
    Check the error log and make the required entry.
    process Step by steps:
    1- create PO (intercompany PO) --> save
    2- create SO to sell to endcustomer (at receiving company)
    3- create DO
    4- assign the previewous PO to DO  (exchange function)
    5- PGI ---> problem as above
    Please, kindly help

    Dear all,
    In this case,  if I enter itemcategory "U" into PO I can post GR and GI at the same time I do PGI. but you know if I use "U" which mean I can't enter the net price as normal because this is a "stock transfer".
    Is there any ideal for this?
    Please, help me

  • Microsoft Word Has Not Been Installed for the Current User

    Hi, everybody
    I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
    Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
    Routes tried and failed...
    1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
    2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
    At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
    Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
    -Kent S.
    Be strong as a ship and wise as a whale

    These questions are really best in the Microsoft Office Forums.
    These are MS Office Questions not ZEN Questions.
    Novell did not design Microsoft's Office Install.
    I have nothing against snapshots, but it does not work great with the Office
    installs, which you yourself know since you are posting here with problems
    based on that.
    And your other method you are trying with the break out is not working well.
    We also know that from experience.
    We can tell you that the way most people install it and the way most people
    succeed doing it, is by doing it the way recommended and designed by
    Microsoft.
    ZEN does that just fine.
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.
    "KentFSmith" <[email protected]> wrote in message
    news:[email protected]...
    >
    > Thank you, Grimlock (-Grimlock?-)
    >
    > Through a google search I encountered a very close suggestion, and the
    > poster said they couldn't remember the name of a MS utility but that
    > there was one that would break out the individual MSIs from the Office
    > 2007 setup.exe bundle. The dependent app appears to be a simple and
    > possibly elegant solution, but without a good way to break out the MSIs
    > I don't see how to do anything other than with a config.xml ('Config.xml
    > file in the 2007 Office system'
    > (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
    >
    > Do you know of that utility and where I can find it?
    >
    > There is a lot of history here now of just doing the individual
    > applications. Everyone gets Word and Excel, but much fewer get
    > PowerPoint and Access. All other reasons aside, a compelling one is the
    > reduced number of help calls to the Help Desk here. Occasionally we
    > also just run the whole Office install for someone who needs some of the
    > odd utilities, but that is easily cost-justifiable for us to break them
    > out as exceptions. Otherwise, we focus 90% of our support on just Word
    > and Excel and it pays off nicely.
    >
    > If we switch to putting full Office 2007 on all PCs then there may be a
    > better approach that include other tools than ZfD, such as the fact that
    > we replace 1/3 of all PCs in the organization each year (so that no
    > hardware is more than 3 years "behind"). We could put 1/3 of all Office
    > 2007 installs into the new PC image. But we still need to support all
    > the use of the apps after the install, so ZfD MUST work well, it simply
    > MUST work well or we're screwed, to use the vernacular. Also, just
    > switching from what we've been doing for years -- single app orientation
    > -- means introducing new-ish issues that have to discover and explain to
    > our comrades, and to adjust our orientation with unknown future costs.
    >
    > But that may end up being the simplest adequate solution. And that's
    > what I want.
    >
    > -K
    >
    > grimlock;1883526 Wrote:
    >> Craig Wilson wrote:
    >> > You should really focus on #1.
    >> > Snapshot is not the way to go.
    >> >
    >> > Details about what is Not working or what random behavior may help
    >> folks.
    >> > Ask in the MS forums may help too. dont' mention zenworks.
    >> > Just say you are installing as Administrator from a share and getting
    >> these
    >> > errors.
    >> >
    >> > While not 100% accurate, it should be good enough to get some good
    >> feedback.
    >> >
    >>
    >> Nor is installing 1 app at a time. Install the whole suite, have an
    >> icon for each app that runs the exe for that app with a dependency on
    >> the another app that points to the installer msi.
    >>
    >> If any user runs any app, it will run if the executable is there
    >> (meaning it's been installed). If the executable is not there then it
    >> calls the dependent application (the installer app) and installs it,
    >> and
    >> then runs it.
    >
    >
    > --
    > KentFSmith
    > ------------------------------------------------------------------------
    > KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
    > View this thread: http://forums.novell.com/showthread.php?t=391573
    >
    >

  • GL account has not been assigned for the excise a/c in customization

    HI ,
    When i try to post MIGO for PO i am getting the following error message .Please help me to solve this issue
    GL account has not been assigned for CLEAR in customization
    Message no. 8I447
    Diagnosis
    GL account has not been assigned for the excise a/c in customization
    Procedure
    Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types
    Thanks & Regards,
    Senthil

    HI
    I have maintained as you mentioned but i am getting the same error message.
    Here i am using INT Charts of account and also i have one question when determining account for Excise whether we have to maintain CAIN charts of account please clarify me on this issue
    Give me a good solution for the above issue
    Thanks & Regards,
    Senthil.

  • Vendor 27672 has not been created for company code 6200

    Hai,
    I am trying to post a invoice against a Scheduling agreement.
    The scheduling agreement has vendor as 27672 and comapny code as 6200 in the header data when i look into ME33L.
    When i trying to post an invoice fo the schedulig agreement using BAPI_INCOMINGINVOICE_CREATE , it is thowing the error "Vendor 27672 has not been created for company code 6200". which i am not able to resolve, as the scheduling agreement is raised against that vendor.
    when i tried to post the invoice manually using MIRO, there was a POP-UP saying there " PO vendor is not an invoiceing party. enter the invoicing party."  where i was giving 27673 which is the alternate payee for this vendor. It is accepting and i could post the invoice succesfully.
    However, the same is not available in the BAPI_INCOMINGINVOICE_CREATE  that i am using.
    Is there any way that i can enter the Invoicing party as i did it when i was posting it manually or is there any other way that i can resolve the issue.
    Thanks,
    Upender

    Hi
    Go to XD01 and enter the same customer code that you have now and enter the required company code and sales org, dist. chnl and division and enter the required details and save.
    Regards
    Madhu
    Edited by: Madhu Naidu on Sep 19, 2011 6:46 AM

  • GL account has not been assigned for  in customization

    GL account has not been assigned for  in customization
    Message no. 8I447
    Diagnosis
    GL account has not been assigned for the excise a/c in customization
    Procedure
    Assign GL a/c for the excise a/c in CIN customization under :    Accounting ->  Assign GL accounts to excise groups and                   transaction types

    Hello ,
    SPRO --. LOGISTICS GENERAL -. TAX ON GOODS MOVMENT -
    > India -
    . Act determination -
    > 1) Define GL ACTS
    2) Define Act types for T. COde
    3) Define GL Act For Transaction and excise Groups
    This settings are done by the Fi consultant.
    FOr the Transaction Type DLFC you got to define the various debit and credit accounts.
    Also in the nest transaction you got to assign the various GL acounts for the Transaction type DLFC :
    Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types
    thanks
    deepak

  • MDW Disk Usage for Database Report Error - A data source has not been supplied for the data source DS_TraceEvents

    Hello,
    On the MDW Disk Usage Collection Set report, I get the following error when I click on a database hyperlink.
    A data source has not been supplied for the data source DS_TraceEvents
    SQL profiler shows the following SQL statements are executed (I've replaced the database name with databaseX)
    1. exec sp_executesql N'SELECT
    dtb.name AS [Name]
    FROM
    master.sys.databases AS dtb
    WHERE
    (dtb.name=@_msparam_0)',N'@_msparam_0 nvarchar(4000)',@_msparam_0=N'databaseX'
    this returns zero rows as databaseX does not exist on my MDW central server, but is a database on a target server (i.e. one that is being monitored and uploaded into the MDW central server).
    2. USE [datatbaseX]
    this produces the following error:
    Msg 911, Level 16, State 1, Line 1
    Database 'databaseX' does not exist. Make sure that the name is entered correctly.
    why is the report looking for the database on my server?
    thanks
    Jag
    Environment: MDW (Management Data Warehouse) on SQL 2008 R2

    Hi Jag,
    Based on my test, while this database is offline, we will encounter this issue. This is because that while we click the certain database in “Disk Usage Collection
    Set” report, it will query some information with that certain database. If this database is offline, we will not access this database to acquire related information and generates this error.
    Therefore I recommend that you check the status of this database by using this system view:
    sys.databases. If it is not online, please execute
    the following statements in a new window to make this database to be online:
    USE master
    GO
    ALTER DATABASE <database name> SET ONLINE
    GO
    If anything is unclear, please let me know.
    Regards,
    Tom Li

  • Financial Reporting - PDF has not been configured for this web server.

    When I try a Print Preview of my report, I received this error "PDF has not been configured for this web server".
    As far as I know, this error is confusing because when I look on my log files I found this:
    --- FRLogging.log ---
    [APP: FINANCIALREPORTING#11.1.2.0] The system cannot access the Print Server at this time. Try again later or confirm the print server name.
    [APP: FINANCIALREPORTING#11.1.2.0] Cannot connect to server on xxxHFRCE04.cf.gouv.qc.ca
    [APP: FINANCIALREPORTING#11.1.2.0] Attempt to get an undefined configuration property
    --- FRPrintLogging.log ---
    HyperionReportException: Could not connect to the server.Please make sure that the server is running as specified in the logon dialog (including port number if not default).
    I read a lot of document but it seem to be au communication issues!!!
    Can someone help me with that.

    I believe the supported version for ghost script is 7.0.6; I had the same problem and after installing the lower version it worked like a charm.
    If you cant find the older version let me know, I'll email it to you or place it in my website.

  • Error - GL account has not been assigned for CLEAR in customization

    Hi
    We are working on ECC 6.0.
    When we try to create Excise Invoice through J1IS for Ref doc Type MATD for Material Doc of 122 Movement Type we are getting the following error -  "GL account has not been assigned for CLEAR in customisation"
    Can anyone help that for which Excise Transaction Type (ETT), the GL account has to be assigned under GL Accounts per Excise Transaction.
    Regards
    Kapil

    Hi,
    Maintain the ETT for CIEV - CANCELLATION OF EXCISE INVOICE in following customizing
    IMG > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction
    Regards,
    Jigar

  • I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months a year.  So, if I have Icloud for my calendar, and turn on a computer that has not been used for 6 months, does all the old information on that computer to go Icloud?

    I have 3 PC's.  Two of them I use at 2 different locations and only use them 6 months each year.  When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud?  Does Icloud push all the new calendar and contact items over the old items?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • HT1379 The USB ports on my 30" Cinema are not working.  The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks.  I need to move the computer between two locations, and the other monitor is a 27"

    The USB ports on my 30" Cinema HD display appear to not work.  The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display.  Now I need to move the computer back and forth between two locations using the two displays.  The need for operating USB ports is essential.  Any ideas.  The display appears entirely normal.  Am running OS X 10.9.

    Disregard, problem solved.

  • Illustrator has not been responding for over a week, I can't open or force quit it. I've already uninstalled, reinstalled, and deleted the preferences folder, but the icon in my dock seems corrupt and is causing the program to not respond and I can't dele

    Illustrator has not been responding for over a week, I can't open or force quit it. I've already uninstalled, reinstalled, and deleted the preferences folder, but the icon in my dock seems corrupt and is causing the program to not respond and I can't delete it.

    Tamara,
    Did you reinstall using the full three step way (otherwise strange things may linger)?
    Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Error message:this version of itunes has not been localized for this language. please run the english version

    Error message received when trying to open Itunes. This version of Itunes has not been localized for this language. Please run the english version.

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • PDF has not been configured for this web server linux 11.1.2

    Hi,
    We installed 11.1.2 Hyperion WorkforcePlanning on Linux 32 bit OS.
    When the user opens the workspace and tries to see the "Profit and Loss" and selects
    "File --> Open In --> PDF format" , it just flicks for a sec and gives following message :
    " PDF has not been configured for this web server"
    Can somebody suggest me what to do ?
    Appreciate your response.
    Edited by: user536857 on Mar 22, 2011 3:07 PM

    Check your print server service on your foundation server, sometimes I have had that just stop for whatever reason.

Maybe you are looking for