Vendor rating FROM to TO date

HI Gurus,
My client want to do the vendor evaluation from certain period to certain period say From the start of last month to End of that month.
He wants to evaluate irrespective on which date he is evaluating but need to get the data for that month.
Suppose today's date is 15.05.2008 and when he runs evaluation today he wants the result of 01.04.2008 to 30.04.2008.
Pls suggest me the possible solution.
Regards
Shashidhar

Dear PR,
This (ME6H )will be just the standard analysis where in we check the alreday evaluated vendors, but I need to evaluate the vendor from and to date..
Pls provide any other solution for the same.
Regards
Shashidhar

Similar Messages

  • Vendor payments using bank info from HR master data

    Dear experts,
    We have setup all employees as vendors in FI to make reimbursements.
    Can we use the banking information in HR master data (IT0009) and make the vendor payments in FI. We don't want to maintain bank information in vendor master.
    So, by entering the personnel number of the EE in the vendor master, can SAP integrate and read the banking information from the HR master data?
    Please let me know if this is possible and how.
    regards,
    vishal.

    You have to maintain bank data for vendors and employees separately.  Vendor master cannot access bank data in payroll module.  Use LSMW to populate bank data in XD02 and establish a process to update bank information whenever there are changes in payroll side.

  • Regarding Vendor Rating.

    Pls any one can help me how to capture Vendor Rating for Quality.
    I have the requirement for accepted with Deviation.
    if accepted it is considered as 100 score
    if rejected it is consideredsas 1 score
    but it the Lot size is some thing more Then One.
    Here, let us assume that Lot size is 10 no's
    out of which i accepted 4 No's
    and rejected                 3 No's
    and accpeted with Deviation is 2.
    and 1 No's is in Hold.
    what should be the score and UD code.
    i mean to say is i want to Decide the Q Score according to the Vendor and Quatity posted .
    pls help me
    thanks in advance.
    Kumar.

    Hi
    A quality score can be derived from the:
    Usage decision
    Share of defects in the lot
    Share of defects for the characteristics
    Quality score for the characteristics
    You can use share of defects in the lot procedure .AssignQ score procedure " quality score from share of scrap" in material master
    This procedure calculates the quality score using the share of scrap in the inspection lot:
                           I_KQD_MAX         Share of scrap
    E_KQD = I_KQD_MAX * (--) ** (-(--
    - 1) ** 2)
                         Limiting val.       Predef. share
    with I_KQD_MAX               Maximum QSc from vendor evaluation
         Limiting value          Lower limit for good quality in QM
         Share of scrap          Estimated share of scrap in inspection lot
         Predef. share           Predefined share of scrap from QM
                                   inspection data
    If it does not meet your requirement, create your own function module ,create new Q score procedure in spro and assin new function module to this procedure.
    Sanjay

  • Query for vendor rating

    Dear All
    I want a query for Vendor rating, which is based on PO Date  PO Quantity GROP Date GRPO Quantity (i.e comparision on that and we can find out this vendor is good for me.)
    Pls Provide me solution.

    Moving this thread from ERP-MM to [SAP Business One Core|SAP Business One Application;

  • Vendor rating report

    Hello all,
    Vendor rating report with respect to PO Delivery date Vs. actual delivery date required.
    The actual delevery date incase of domestic PO is the GoddsReciep Number date, and incase of importPO, this is the invoice date of the vendor.
    thanks &regards,
    Obulesu

    Hi,
    T code MC$6 will be useful for you.
    There you can get the delivery date variance in days.
    Regards
    KK

  • Vendor Stock On A Particular Date

    Hi,
    How can we see the Vendor Stock on a Particular Date.
    For example, today is 04.08.2007, and actually we want to see the Stock of a Vendor as on 31.03.2007.
    Regards.

    PK Karn
    Vendor stock is dynamic report so cant get from any t.code
    Try to make use of material document and extract the data from table
    Thanks
    Bala

  • Vendor replication from R/3 to SRM

    Hi,
    I am using BBPGETVD for the vendor replication from R/3 to SRM.
    I need to modify some fields related to Company data and Vendor data of the vendor during the replication (for example: Vendor should always be created with Invoice Receipt Expected check as checked, Transmission media as 'Mail' etc).
    Can anybody tell me which BAdi or Exit i can use for this purpose.
    Thanks in advance.

    Hi,
    I believe this thread should goto the dedicated forum for SRM.

  • Automatic replication of vendor masters from SAP R/3 to EBP

    Hi
    For this issue I found the below program and steps to do the automatic replication of vendor master from SAP R/3 to EBP
    PROGRAM BBP_VENDOR_SYNC
    The program BBP_VENDOR_SYNC automatically synchronizes the backend vendors with the SRM system.
    To run the program BBP_VENDOR_SYNC, you first have to make the following settings:
    Path in the Implementation Guide (IMG):
    Supplier Relationship Management --> SRM Server  -->Technical Basic Settings -->Settings for Vendor Synchronization --> Make Global Settings
    Supplier Relationship Management --> SRM Server  -->Technical Basic Settings -->Settings for Vendor Synchronization --> Define Settings for Each Backend System
    Then you have to make the following settings in transaction SA38:
    · Enter program BBP_VENDOR_SYNC.
    · Click on the pushbutton Background.
    · Enter the report name BBP_VENDOR_SYNC.
    · Either define a new variant or use an existing variant ( The new Variant as Test Vendor)
    · Click on the pushbutton Schedule.
    · Enter the job.
    · Define the start date.
    · Either schedule once or schedule periodically. Then you have to define the period interval.
    I followed  the above mention steps and I am able to setup the Schedule on timely basis and the job was completed successfully, but the vendors are not replicated successfully .
    I am receiving the below error in transaction code SLG1.
    1.The Specified Node does not Exist in the Org. Plan(Message no. BBP_VENR006).
    2.No Vendor Replicated from Backend MD1CLNT(Message no. BBP_VENR017).
    Please check and advice.
    Thanks & Regards
    Sada

    Hi Sadasivam,
    Make Global Settings
    Use
    In Customizing for vendor synchronization, you define between which mySAP or ERP backend systems and the EBP System you wish to automatically synchronize the vendor master data. This setting is necessary in order to start a job-based execution of the synchronization, so that the vendor master data that is newly created or changed in the backend is updated regularly in the EBP System.
    Requirements
    You wish to use the automatic vendor synchronization functionality.
    In the Implementation Guide (IMG) activity Define RFC Destinations, you have defined the RFC destinations for your systems.
    Under Define Backend Systems, you have defined the backend systems for your systems.
    Activities
    Customizing for Vendor Synchronization consists of two parts. In the first part you make those settings that are valid for all backend systems. In the activity Make Settings for Each Backend System you can define or display detail data for the individual backend systems.
    Make Global Settings
    By setting the indicator Create New Vendors Also, you can determine that those vendors newly created in the backend systems are also newly created during the synchronization. If this indicator is not set, the only data updated is that of the vendors in the Enterprise Buyer System whose data was changed in the backend systems.
    Note:
    If you have not yet made an entry here, an empty screen appears when you start the activity. To make the settings, choose New entries or press F5.
    Further Settings:
    Carry Out Address Check for Duplicates :
    Organizational Unit in EBP for the Vendor
    Enter the eight-digit number, for example, 50001234.
    Vendor Number Assignment Type
    In the dropdown box, choose the method with which the number is to be allocated when a new vendor is created, for example, internal number allocation.
    Hope this makes you more clear. My mail i.d is [email protected]
    Rgds,
    Teja

  • Condition Pricing Date is Diff. from PO Creation date

    Hi,
    We have created a PO 1100041212 on dtd. 05.05.2011.
    In PO Conditions tab, i have a field in the detail view ' Condition Pricing Date'. For Condition type P001, it is not showing the PO date. (mostly cases has the same date of PO Creation date)
    Condition Pricing Date showing is 30.01.2011. Why???
    Plz guide..from where these date is picking...

    Dear Anil,
    Yes, Info Record can exist and can be created without material number, This can be done in combination with vendor and Purchase Org. I suggest create this info record manually and then create PO and in PO check if the "Info Update" indicator is set or not. Info update record should be set in both quotation and in PO.
    Info record can be manually created using following menu path:
    SAP Menu -> Logistics -> Materials Management -> Purchasing -> Master Data -> Info Record -> Create
    Regards,
    Ahmad Farhan Khalid

  • Taking away one vendor group from sensitive field

    Hi,
    In the current system we have 8 vendor groups. we have created reconciliation field as a sensitive field - so has to control the creation and changes of the vendors. Now, the requirement is to take away one of the vendor groups from this senssitive field validation. Can we do this? Please advice.
    Regards,
    Narin

    Hi,
    Choose that particular account group and click on company code data- make reconciliation account status to display.
    Check once the same in test server.
    Regards,
    Sankar

  • Vendor rating and insurance indicator table

    Hi all,
        In which table the fields vendor rating and insurance indicator zz_moc_rating & zz_insurance shown in EKKO stored?

    Hi Sathya,
    These are custom fields not created by SAP but by someone in your project.
    Just in EKKO if you have some Check Tables against these fields. If yes then these fields are getting populated from there. Else from some screen or program wherein user is entering some input.
    Regards,
    Chetan.
    PS: Reward points if this helps.

  • Vendor Rating Procedure

    Dear All
    Vendor rating full scenario
    Regards
    k.s.krishnamurthy

    Hi
    Path: 1. SPRO>MM>Purchasing-->Vendor Evaluation-
    2. SPRO>MM>Purchasing>Vendor Evaluation> Define Criteria Price,quality,Delivery,Service For each criteria you will have Sub criteria Criteria Sub-Criteria 
    3.SPROMM>Purchasing>Vendor Evaluation-->Define Scope List.
    4. SPROMM>Purchasing>Vendor Evaluation--> Maintain Purchasing Organization Data 
    5. ME61 With above, you need to explore yourself and read SAP help files .For more check the link
    Raju

  • Update the Vendor master from Employee master - PRAA

    Hi
    I need to know the process of updating multiple vendors from multiple employee data .i.e.bank,address and pernr.
    I was using PRAA transaction but it was not updating ...i think i miss some entries..especially file path...
    what are the steps need to be taken care of ...what should be in the file in the file path?
    please let me know
    Thanks

    Thanks Rob
    I checked the documentation..and found my error...actually the PRAA is updating vendor with employee data only when the employee number(PERNR) is updated in Vendor master...so i updated the field PERNR in Accounting section of Vendor then i ran the transaction PRAA it worked...it created the session and i processed the session..
    My question is ..is the PERNR is mandatory in Vendor master record?
                              and How iam going to update the multiple vendor records with multilple Employee records? since the vendor for Reference is the single filed?
    Please let me know
    Thanks
    Govi

  • How to transfer vendor master from MM to SUS?

    Hi friends
    How to transfer vendor master from MM to SUS
    Are the following steps correct
    1.create vendor master in MM
    2.use tcode BD14 in MM and enter partner system as SUS ( to send vendor master)
    3.use BD15 in SRM to accept the master data from MM.
    Please let me know if i am wrong
    Thanks
    Vinny

    Hi Vinny,
    Please follow below steps for transferring vendor master from MM to SUS.
    !) Create a vendor master in MM and assign class type ALV under enviornment-Classification tab.
    2)Go to BD14 and enter following fileds
    Vendor number
    Class
    Message type
    Target System...
    Before doing BD14 hope you have done all the partner profile configuraion as well as model view creation and mapping has been established between MM to XI to SUS.
    Before repliating vendor, please note that vendor root org unit has been created in SUS system.
    After executing BD14 then check in your mm system WE05 whether idoc has been generated and sent to XI system.
    If sent to XI system successfully then please check in SXMB_MONI t-code in XI what is status then finally check  in SUS.....
    If useful points please...
    Thanks
    Ravi

  • How to get period date of for a given month from a given date in mdx for SSRS report (mm/dd/yyyy)

    I have a situation,  where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the  date is given
    from the parameter dynamically) in MDX for SSRS report
    ram

    Hi ram,
    Per my understanding that you want to get the period date based on the month selected and the given date, right?
    Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
    What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
    Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
    I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
    If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
    You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
    Specify the available value:
    Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
    Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
    Specify the default Value:
    Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
    Add filter to the dataset as below:
    Preview you will get all the date in the given Period:
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu

Maybe you are looking for