Vendor Returns for SLED materials which are blocked

Hi All,
    We have certain materials for which Shelf Life has been expired. Using QA07, we have blocked these materials. Now we need to return those materials to vendor. We tried creating return PO. While doing MIGO (using 161 mov type ), it is showing the error "SLED 09.06.2011 of batch A has been exceeded".
Please let us know how to return those material to vendor from blocked stock.
Regards,
Rosh

Hi,
It depends if vendor is ready to accept the expired materials then we return it to vendor.
If this is not the same then we have to keep it blocked (Transfer from unrestricted to blocked stock, MvT - 344) for that time till we destroy (scrap) it. And once we have decided to scrap it then we do Goods Issue using MvT 551.

Similar Messages

  • Vendor Return for Capital Goods

    Hi Gurus,
    Morning all of you, In vendor return for Capital goods,
    i have created Excise Invoice using J1IS T-code,
    When i'm trying to Post it using J1IV, Surprisingly I am finding that RG23A fields are getting populated instead of RG23C.whereas my requirement is that instead of RG23A , RG23C should get populate, so that i can complete mt transaction.
    plz suggest if any configuration has to be done for that, i have checked all configuration, i am finding correct from best of my knowledge.
    Full points will be awarded.
    Thanks & Regards
    Manoj K singh

    Thanks SAP Guru,
    This problem is solve using ABAP coding,
    anyway i am very much thankfull to all of your's valuable input.
    thank you.
    manoj

  • HT204053 How do I create an Apple ID for my kids which are linked to my Apple ID so that they can make purchases without me having to tell them my user/password?

    How do I create an Apple ID for my kids which are linked to my Apple ID so that they can make purchases without me having to tell them my user/password?

    Welcome to the community.
    Unfortunately, you cannot do that. The first hurdle that you are going to face, is that mobile devices, by virtue of being prone to loss, will always require that a password is entered before a purchase of any kind is made.
    If your concern about the password, is related to your privacy in regard to your mail, contacts and calendar information rather than their acces to make purchases, then the best solution would be for you to use another Apple ID for iCloud.
    Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
    You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
    The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services.

  • How can I get INSTID_B for the documents which are stored using Store Business Document functionality

    Dear experts,
    I had activated the functionality of Store Business document and successfully stored documents in external server.
    My client have a custom function module which is used to send emails.In that FM they used SO_DOCUMENT_READ_API1, SO_DOCUMENT_SEND_API1 function modules.They passed Instance Ident(SRGBTBREL->INSTID_B)(eg: FOL33000000000004EXT39000000000026) as export parameter to the FM 'SO_DOCUMENT_READ_API1' and get the attachment details and content.
    Here my problem is I do not have entries in the table SRGBTBREL for the documents which are stored using the Store Business Document functionality and without INSTID_B I am unable to use the FM 'SO_DOCUMENT_READ_API1' to get the document details and content. Please help me to find INSTID_B for documents which are stored using Store Business Document functionality or please let me know if there is any other way to use FM 'SO_DOCUMENT_READ_API1' for documents which are stored using Store Business Document.
    Thanks in advance.
    Regards,
    Kiran

    Hi Kiran,
    You can use the following method to get the information. For example if you want to get BO documents for a customer
    CALL METHOD cl_binary_relation=>read_links
       EXPORTING
         is_object           = ls_lpor
         it_relation_options = lt_relat
       IMPORTING
         et_links            = lt_links.
    then fill  ls_por-instid with a customer number (KUNNR), ls_por-typeid = 'KNA1' and ls_por-catid = 'BO'.
    Table  lt_relat should contain a line option  for each document type (for example 'I' 'EQ' 'NOTE', 'I' EQ 'ATTA', 'I' EQ 'URL', ...
    In table lt_links you will get your information.
    Maybe some other methods of class CL_BINARY_RELATION may also solve your issue.
    Regards,
    Klaus

  • I purchased ..my phone in India-and warranty is about to expire ..if I purchase apple care kit from US-will it be valid for phone`s which are purchased in India.

    I purchased ..my phone in India…and warranty is about to expire ..
    if I purchase apple care kit from US…will it be valid for phone`s which are purchased in India.

    Yes

  • Time contraint for wage types which are the subtypes of the Infotypes.....

    Dear Sap folks ,
    Anybody can explain that "what is the role of "Time contraint"(Once / Sev.Times) for wage types which are the subtypes of the Infotypes like IT0015 and  IT0014 (V_T512Z).
    Thanks & Rgards
    Maria Carlos Perera

    Hi,
    any wage type marked with once can be maintained only once for that specific period and several times means it can be there more than one time.
    For example, IT0015 wage type XXXX has value once. You are booking this wage type on perticular day say 12.06.2011 then you cannot book same wage type XXXX on 12.06.2011. But you can book this on any  oteher day of that month. if its several times then you can have several entries on same date.
    Regards,
    Poorvi.

  • Excel 2007 throws "this action is valid for the products which are currently installed" while i try to open .txt file format.

    Hello,
    We have Windows 2008 r2 TS, on which we have MS office 2007 Standard installed. There are almost 50 users on this particular machine.
    The problem is we get an error message when we try to open a .txt file in Excel (Right click on .txt file--> Open with --> Excel). Error message is as follows  "this action is valid for the products which are currently installed".
    Previously this was faced by all users so we completely reinstalled it, which worked, except for 1 user.  Currently i have recreated the profile for that particular user but that also didn't helped.
    A drag-drop approach works but user don't want it that way.  
    Now am clueless in terms of where should i look into. Any help would really be helpful.
    Thanks,
    Amol S

    Hi Amol S,
    As per the description, I understand that you are trying to register .dll files in your computer now.
    I suggest you to go through the following article to know more about registering .dll file.
    Refer to the Link:
    https://support2.microsoft.com/kb/844592?wa=wsignin1.0
    Unregister or Register DLL or OCX files:
    The Regsvr32 tool is a command-line utility that can be used for registering and un-registering OLE controls like DLL and ActiveX (OCX) controls in the Windows operating system. If you find
    that some of your Windows functions are note working properly, you may need to register your
    dll files.
    Register dll file
    To register a dll or
    ocx file, open a command prompt windows as an administrator, type the following and hit Enter:
    regsvr32 “path & filename of dllor
    ocx
    Unregister dll file
    To un-register a dll or
    ocx file, open a command prompt windows as an administrator, type the following and hit Enter:
    regsvr32 /u “path & filename of dllor
    ocx“
    Note: This will register or unregister the
    dll file.
    Hope this information is helpful. Please do let us know if you need further assistance, I’ll be glad to assist you.
    Regard,

  • Want to create new protection group for 2 members which are already under another protection group.

    Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

    Hi,
    It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off.  If it was co-located, then the old replica and RP
    volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
    Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Vendor Return for VMI for multiple materials

    We have a scenario where we need to do return to Vendor for many items (1000 plus). Is there a way to do this easily other than using MBRL which is a very difficult and complicated process, considering the number of transactions we need to do. My understanding is that SAP does not support Vendor Return PO process for the VMI materials. Can anyone help?

    The return delivery can entered from MBRL or MIGO...
    If you have 1000+ line item and all line item has a different quantity and different material document number, Then you can run LSMW for MBRL..

  • Vendor return of rejected materials

    Dear experts,
    I have one issue related with vendor returns. My client have almost 45 purchased materials of different quantities in legacy system which are rejected in quality.then all those rejected materials were uploaded in SAP by 561 movements.Now all rejected materials are to be returned to vendor. My client want all Materials to be returned to SAP.All the goods are excisable.
    May i know the process in SAP?  Client also want materials financial impact to be done prefectly along with proper excise entry. so wil it be done as per normal return PO cycle? Or any other process?
    Also i m not clear logically.about " On-Order Stock".which we view in MMBE.Please explain Me,.
    Thanks and regards,
    Ravi

    As you added those material by 561 movement type so you can returned them by 562 movement type as those purchases did not complete the purchase in SAP, so no need to run return purchase cycle in SAP. Regarding the on order stock means you already created another PO for those materials in SAP.
    regards,
    qsm sap

  • BAPI for Finding Materials which have Classification Characteristics

    Hi,
    Does anyone know of an RFC or BAPI to return a list of materials which have a specific Classification Characteristic
    Most of the functions I've found will return the all the classification characteristics if you know the material number and the class.
    The other search tools and reports all seem to work with the SAP GUI and are quite interactive. I need to be able to execute an RFC or BAPI without SAP GUI.
    In my case, I know the Class Type and Class and I know the characterstic and attribute value but need a list of matching materials.
    Thanks
    Paul

    Hi Ashok
    Actually my requirement is that i want to post the Vendor expenses thro' Vendor Portal and for that Validation will not helps us.
    So thro' BAPI 's only we can post the expenses ...........
    I suppose that its clear for you now.
    Revert
    Regards
    Praveen

  • Vendor Return for after INvoicing

    Hi Dear,
    We have one scenarion
    suppose we already did GR for 100 Q and also made quality inpection for all quantities now we have to return  20 quantites ,but we are unable to return delivery giving message IR already happened , if first we trying to make credit memo got return GR 20 quantities in MIRO then system giving meassge material in unrestriected , quality has already passed,please suggest me some way how we can map this scenario..
    Thanks,
    Dharmveer

    There is no direct connections with your movement type 161 and your ETT OTHR, when you will use J1IS for createing outgoing excise invoice wrt to the material doc it will determine the GL acc with the aid of OTHR ETT this is standard settings.
    Now if you want to hit the or update the RG23A/ RG23C in the process then maintain the movement type 161 and the register type in the below mentioned path.
    IMG->LOG general->Tax on goods movement-> India-> Business transaction->Specify Which Movement Types Involve Excise Invoices.
    Inside you will find the dropdown to select the register you want to update.

  • "Confirmed qty" and materials which are not in stock

    Hi
    In my opinion "confirmed qty" in the sales order schedule lines have nothing to do with the available stock for that sales order. Is there a transaction for checking which materials are really on stock and ready for delivery? VL10A gives all positions also those which are not produced by PP module.
    Best regards,
    MK

    Hi,
    Confirmed qty has nothing to do with avl stock only if your availabilty check is off while the sales order processing. Otherwise your material will be confirmed only if the stock is available.
    Anyways,you can go to transaction MMBE and check the stock of that particular material in the plant which you are using in the sales order.
    The stock can also be checked by selcting the line itemclick on environmentavailability.
    Reward points if it helps.
    Regards
    Karan

  • GL display for inventory account which are not defined as line item display

    Hi All,
    We have inventory gl accounts which are auto post accounts , these accounts get posted when grn is done. these accounts are not defined as line item display accounts, but if we execute the T code: FS10 we get the gl balance display and not line item display.
    Our requirement is that we should be able to view the line item display matching the GL account balance in that GL account.
    Can we get the report in MM module line items wise display.
    Regards
    Prashant P. Zinge

    Hello,
    You should use RFSEPA01 program via execute SE38 transaction.
    This program activate line item for each account. Activation means, this program generate line items to BSIS table. So that after this program running, you can see line items in FBL3N.
    Regards,
    Burak

  • Report for reversed documents which are posted again correctly in SAP

    Hi All,
    please advise -
    For eg : one document is reversed due to incorrect data posting and the team repost it again correctly. in this case we need a report which can validate that the correct entry is posted in SAP and not missed by the processor.
    is there any tcode for running a report which can provides us the reversed documents with or without reposted correct document?

    Hi Tarun,
    is there any tcode for running a report which can provides us the reversed documents with or without reposted correct document?
    For GL accounts we can use tcode FBL3N and choose the selection 'Open items' and execute. It will give the lit of all the open items which are not yet processed. Then to get the list of only reversal documents, apply the filter on 'Document Type' as AB.
    Regards
    Raj

Maybe you are looking for