Verification failed for: Property Template Resource: The template specified

Hi All,
we are using Property Propagation report, but it is giving following message:
Verification failed for: Property Template Resource: The template specified does not exist
Regards,
Ganga

Hi All,
issue is reolved. We should not give '%20' as indicator of Space.
that was the mistacke.
Regards,
Ganga

Similar Messages

Connection verification failed for data source using mySQL

Hi,
I having problem with mySQL datasource and getting the above error. This is only happening in our staging server. We are using ColdFusion 8 running JRUN4 and trying to connect to mySQL v 5.1.41. I tried adding DSN from my localhost using ColdFusion 9 developer edition and I am able to connect without error.I know that mysql server, username & password is valid. I can access the mysql also using mySQL gui tool from different pc and it works fine. I'm believe that this has something to do with mySQL driver? Can somebody shed some light on how can I fix my DSN connection problem? Thank you.
here's the error:
Connection verification failed for data source: forum
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception: ** BEGIN NESTED EXCEPTION ** java.net.ConnectException MESSAGE: Connection timed out: connect STACKTRACE: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.(Socket.java:366) at java.net.Socket.(Socket.java:208) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc.Connection.(Connection.java:1553) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266) at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:589) at coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(ConnectionRunner. java:67) at java.lang.Thread.run(Thread.java:619) ** END NESTED EXCEPTION ** Last packet sent to the server was 0 ms ago.

http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=6ef0253
HTH
Tim Carley
www.recfusion.com
[email protected]

Connection verification failed for data source:

Hi,
I having problem with mySQL datasource and getting the above error. This is only happening in our staging server. We are using ColdFusion 8 running JRUN4 and trying to connect to mySQL v 5.1.41. I tried adding DSN from my localhost using ColdFusion 9 developer edition and I am able to connect without error.I know that mysql server, username & password is valid. I can access the mysql also using mySQL gui tool from different pc and it works fine. I'm believe that this has something to do with mySQL driver? Can somebody shed some light on how can I fix my DSN connection problem? Thank you.
here's the error:
Connection verification failed for data source: forum
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception: ** BEGIN NESTED EXCEPTION ** java.net.ConnectException MESSAGE: Connection timed out: connect STACKTRACE: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket.(Socket.java:366) at java.net.Socket.(Socket.java:208) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc.Connection.(Connection.java:1553) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266) at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java :589) at coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(Connect ionRunner.java:67) at java.lang.Thread.run(Thread.java:619) ** END NESTED EXCEPTION ** Last packet sent to the server was 0 ms ago.

Also make sure your firewall has the required port open (1433
default) and if you are running 2003 on the SQL box, especially if
you ran the security Wizard, make sure the IPSec is allowing the CF
box to communicate with it, and vise verse.

Hostname Verification failed for certificate with CommonName 'gawlsdev02.ss

Hi All,
I want to know the meaning and the reason of this exception:
<Jun 17, 2010 2:05:52 PM EDT> <Warning> <Security> <BEA-090504> <Certificate chain received from gawlsdev02 - 147.141.83.104 failed
hostname verification check. Certificate contained gawlsdev02.ssga.statestr.com but check expected gawlsdev02>
<Jun 17, 2010 2:05:52 PM EDT> <Debug> <TLS> <000000> <Hostname Verification failed for certificate with CommonName 'gawlsdev02.ssga.
statestr.com' against hostname: gawlsdev02>
thanks in advance.

When Webloigic Server tries to validate the certificate, it compares te CN of the certificate with the hostname from where the request is coming from.
If they don't match, hostname verfication fails and SSL connection is not established.
In your case I see the CN is gawlsdev02.ssga.statestr.com whereas WLS is expecting it to be gawlsdev02.
U can use this option to ignore host name verification
-Dweblogic.security.SSL.ignoreHostnameVerification=true
To know about other SSL issues, u can refer this
http://weblogic-wonders.com/weblogic/2010/01/28/troubleshooting-ssl-issues/
-Faisal

Connection verification failed for data source on port 1433

Trying to set up a DSN for a SQL Server database on a new computer and it's failing every time.
Connection verification failed for data source: csf
java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect
The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect
Now, when I installed CF 11, it installed on port 8500. However, when I try changing the port in the setup to 8500, I get this error:
Connection verification failed for data source: csf
java.sql.SQLException: Timed out trying to establish connection
The root cause was that: java.sql.SQLException: Timed out trying to establish connection
I cannot find anything online on how to fix this! HELP!!!

Hi,
Is that SQL Express edition? If so perhaps TCP protocol is not enabled. Is Windows firewall turned on? Check port 1433 is open.
Normally you would not create a datasource to apache port 8500, that is a web server not database server port.
HTH, Carl.

Signature verification failed for PolicyAssignmentID

I am in the process of setting up a new SCCM 2012 R2 server. I have just begun to add some test boxes to the environment and every server thus far is registering in SCCM but is not pulling down its policies. When doing a policy retrieval evaluation
cycle the below is
immediately spit out in the PolicyAgent.log file. Any help would be
appreciated!
Signature verification failed for PolicyAssignmentID {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
Raising event:
instance of CCM_PolicyAgent_PolicyAuthorizationFailure
ClientID = "GUID:F504615C-04F8-462D-B341-265C2FAEE7E7";
DateTime = "20140708132926.819000+000";
PolicyNamespace = "\\\\.\\ROOT\\ccm\\policy\\Machine\\RequestedConfig";
PolicySource = "SMS:RET";
ProcessID = 3532;
ThreadID = 4320;

It seems I have resolved my issue. The cause was in the AD publishing. I'm not sure if some parts were corrupt or simply missing but after removing the AD forest from 'Administration\Hierarchy Configuration\Active Directory Forests' in the
SCCM admin console and re-adding it back SCCM was able to republish the needed info. Then after a few minutes to allow for replication I was able to run a machine policy cycle which pulled all of my policies down!

Error: "Verification Failed" Could not communicate with the server.

"Verification Failed" Could not communicate with the server.
I get this message every time I go to Icloud in setting menu.
also my contact are not in sync (empty on Ipad)
What does this message mean, and how do I solve it.
Everything else works (Autodesk Draw also works with Icloud and it works fine)
Mail ok
Downloading from appstore ok (also after password)
Please provide me with a solution due to this problem I can't get my contacts on my new ipad (at least that is what I think)

Ok I got it working... the Ipad stores your password at different locations. So changing it once does not do the job. I thought the Ipad had the Single Sign On function for the apple password.
So make sure that you not only change your password in "the shop" but also in the setting menu (general) and icloud menu.
this helped for me, I had to let go the Single Sign On thought first....

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

Clustre verification failed for 10gR2 on RHEL3 Update 6

When i run this command (for Release1):
runcluvfy.sh comp sys -n node1,node2-p crs -r 10gR1 -osdba dba -orainv oinstall -verbose
It shows success.
But when i run (for Release2):
runcluvfy.sh comp sys -n node1,node2-p crs -r 10gR2 -osdba dba -orainv oinstall -verbose
It fails with
System requirement failed for 'crs'
Verification of system requirement was unsuccessful on all the nodes.
The package on which it fails is
Check: Package existence for "libpng-10-1.0.13-8"
Node Name Status Comment
node1 libpng-1.2.2-25 failed
node2 libpng-1.2.2-25 failed
Result: Package existence check failed for "libpng-10-1.0.13-8".
Initially when i ran CVU for nodeconnection check it failed and i continued due to the following message at metalink.
runcluvfy.sh comp ssa -n node1,node2verbose
CVU reports the error below if non-routable IP addresses such as 192.168.*.*, 172.*.*.* or 10.*.*.* are used for the public interface (eth0).
ERROR:
Could not find a suitable set of interfaces for VIPs.
Node connectivity check failed.
The error can be safely ignored. As a workaround, invoke the Virtual IP Configuration Assistant (VIPCA) manually during the installation on the second node and a suitable network interface (eth0) will be detected.
So is it the cause of this failed test or the libpng package problem ???
Thanks in Advance
Sujan Gautam

When you say Failed Explain!::: Do you mean when you go to About Phone then System Update it is Not Updating or what. If this is the Case it can Take a few Days from when the Update is Re-leased to Move around. You can help your Razr to get it by Turning it Off an then Back on. Once or twice Threw the Day to help try to Push it on it. I have done this with my Phones in the Past to Help push the Update on it. But as i said it may take a Few Days before you get it,,,b33

Load report Failed, COMExpection: System cannot find the path specified

Interesting problem:
I have an application that runs on a web server (currently running it as simple test application to make solving this easier). We use a BO XI report to load data from the DB via a stored proc, then run an ExportToStream to get CSV data to return to the caller.
It all works well as long as I run the application under the NT Account logged into the Box (W2k3, R2). But when using a different account (it's a domain admin account), it fails with the following error:
System.Exception: Load report Failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
at CrystalDecisions.ReportAppServer.ClienDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CyrstalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod).
The report is located on a file drive the openMethod is OpenReportByTempCopy. The Temp directory for the user (landes) exists on the box, all things seem to be in place.
Anybody know that path is specified and how to overcome this?
Thanks

Will it be possible to check this registry key: HKEY_LOCAL_MACINE\SOFTWARE\Suite 11or11.5\Report Application Server\InprocServer\LocalConnectionMgr and verify if the ConnectionDirectoryPath is set to something like C:\ ?
If not, set to C:\ and see how it goes after running your app.
Cheers
Alphonse

Login to Adobe account fails for all web resources and has for a week.

Somehow it let me post a reply to one of my posts in this forum, and I'm hoping it will allow me to post this new thread as for the rest.... I'm posting here because this is the first place it has let me post, and I'm trying to get FB4.7b to ACCEPT the serial number Adobe gives when you download the installer OR... on the off chance that that never would work but might somehow work in b2, download and install b2 and see if it will accept the serial number then. Very disconcerting to watch your 'trial period' count down when you -own- FB 4.5/6 and have a valid serial number and the one given as a dummy s/n fails. Cheers!
For instance:
Attempting to download FB4.7b2: from http://labs.adobe.com/technologies/flashbuilder4-7/to http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7
http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7Trying to access my account details here (It shows Bramblethorne as logged in and gives me the Sign out) option.
Trying to post a comment to an article in the online documentation
I've tried to access other locations, developer/help/download/forum/etc and they all fail as well.
All result in the following
Error processing your request
We're sorry, we encountered an error processing your request.
Please try your request again. You may wish to try one of the following links:

Somehow it let me post a reply to one of my posts in this forum, and I'm hoping it will allow me to post this new thread as for the rest.... I'm posting here because this is the first place it has let me post, and I'm trying to get FB4.7b to ACCEPT the serial number Adobe gives when you download the installer OR... on the off chance that that never would work but might somehow work in b2, download and install b2 and see if it will accept the serial number then. Very disconcerting to watch your 'trial period' count down when you -own- FB 4.5/6 and have a valid serial number and the one given as a dummy s/n fails. Cheers!
For instance:
Attempting to download FB4.7b2: from http://labs.adobe.com/technologies/flashbuilder4-7/to http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7
http://www.adobe.com/cfusion/entitlement/index.cfm?e=labs_flashbuilder4-7Trying to access my account details here (It shows Bramblethorne as logged in and gives me the Sign out) option.
Trying to post a comment to an article in the online documentation
I've tried to access other locations, developer/help/download/forum/etc and they all fail as well.
All result in the following
Error processing your request
We're sorry, we encountered an error processing your request.
Please try your request again. You may wish to try one of the following links:

Verification Fails for Software Update AND files downloaded from Apple

Hi all,
Upon first running software update on my brand new MacBook Pro 15", I remember seeing that the verification of a couple downloads failed. After restarting repeatedly and running software update again and again, I eventually narrowed the culprit down to an iPhoto update image.
Bizarrely, even downloading the .dmg from the Apple Downloads site, in multiple browsers, would result in a failed verification. Yet downloading on other machines worked fine.
Now, I'm having trouble verifying the checksum of the iWork image from Apple's own site. I haven't the first clue about what's happening here.
Does anyone have even the faintest idea?
Thanks!

try if booting your Mac into _*safe mode*_ helps. while in safe mode, repair permissions using disk utility, then reboot normally.
if the .dmg mounts on one of your other Macs, you can use your network to install the software. mount the .dmg on the other Mac and connect to it from the problem machine.
JGG

Verification Failed Could not communicate to the server

I am a new iPad owner and I am very frustrated. I keep getting a verification failure or cannot find server. I have rebooted the router and the iPad but I cannot seem to fix the issue. I am also trying to set up Mobile Me. Help someone. Please!!!!

I have no idea what account you are trying to set up but apple.imap.mail.yahoo.com is clearly the wrong server so its no wonder its not replying.
What mail account are you trying to set up ?

Signature verification failed

Hi all,
I've been seeing a really weird problem with signing my HTML5 extension for Illustrator. I'm using the ZXPSignCmd tool to create a .zxp bundle and sign my extension from the command line. I'm able to install the extension using the Extension Manager, and I've also been able to distribute it to a private group through Adobe Exchange. It installs just fine, and runs great the first time, but after closing Illustrator and reopening it the extension often fails to load and just shows a blank window. I'm on a Mac, and looking at the log file here shows the following error when it happens:
/Users/<<userName>>/Library/Logs/CSXS/csxs-ILST.log
2014-12-17 10:18:02 : ERROR Signature verification failed for <<extensionID>>
This is the only indication I have that it is a problem with the certificate. It seems really strange that it installs without errors and works once, but then fails when trying to load again. I was using a self-signed certificate, but I just bought a certificate from DigiCert to see if that would help, but I'm still having the same problem.
This actually happens very rarely on my machine, but happens frequently to my other users. I assume this is somehow because I have been doing the development on this computer, so something is different about my extension environment.
Has anyone else seen this issue at all? Does anyone have any tips that might help me to debug this? Other log files to look at, potential problems with the certificate or manifest file? I've tried about everything I could think of, so any help would be greatly appreciated!
Thanks,
James

Nailed :-)
For the folder you might save files into, there are few tokens in CEP:
/* Identifies the path to user data. */
SystemPath.USER_DATA = "userData";
/* Identifies the path to common files for Adobe applications. */
SystemPath.COMMON_FILES = "commonFiles";
/* Identifies the path to the user's default document folder. */
SystemPath.MY_DOCUMENTS = "myDocuments";
/* Identifies the path to current extension. */
/* DEPRECATED, PLEASE USE EXTENSION INSTEAD. */
SystemPath.APPLICATION = "application";
/* Identifies the path to current extension. */
SystemPath.EXTENSION = "extension";
/* Identifies the path to hosting application's executable. */
SystemPath.HOST_APPLICATION = "hostApplication";
Otherwise you can rely on JSX folder tokens such as Folder.appData, Folder.userData etc (see a complete list on pages 56-57 of the JavaScript Tools Guide pdf) and create your extension's own folder.
Mind you, CEP extensions should support both indexedDB and localStorage - one of them might fit your needs.
Best
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

TS3297 I i downlaoded flashcards + with the top in app purchase of "US english female" for 1.99 and it shows the purchase with the option to download it for free then it comes back "Failure ?! Receipt verification failed !

I downloaded flashcards + with the top in app purchase of " US english female" for 1.99 and it shows the purchase with the option to download it again for free then it comes back "Failure ?! Receipt verification failed ! I have deleted the app and reinstalled several times and it still does not work !!!!I have a iphone 4s with the 5.1.1. Thanks

Lots of people having this problem. Flash card+ says this is due to a change in the Apple processes receipts... See posts on their facebook page. https://www.facebook.com/flashcardsplus/timeline?filter=2

Verification failed for: Property Template Resource: The template specified

Similar Messages

Maybe you are looking for