Verify that the database is created with the correct path specification
Dear All
When I installed DB2 9.1 with SP4 on windows 2003 64 bit,I use Configuration Assistant tool which is problem
SQL1031N The database directory cannot be found on the indicated file system. SQLSTATE=58031
Explanation:
The system database directory or local database directory could
not be found. A database has not been created or it was not
cataloged correctly.
The command cannot be processed.
User Response:
Verify that the database is created with the correct path
specification. The Catalog Database command has a path parameter
which specifies the directory where the database resides.
sqlcode : -1031
sqlstate : 58031
Thanks
Hi Phuc,
Could you please validate, that the database TST is located in driver H: ?
If the database is there, you find a directory with the name of your instance under the H: drive, inside this directory, you must find a NODE0000 directory and finally inside the NODE0000 directory there must be a SQL0000? directory, where ? is a number.
You get your instance name from the environment variable DB2INSTANCE or simply by the execution of:
db2 get instance
If there is no SQL0000? directory at all, this means the database is located somewhere else.
If there is SQL0000? directory in that drive, you can perform the following:
db2 CATALOG DB TST AS TST ON H:
And provide the error message, if any.
Hope this helps
Best regards, Edgardo
Similar Messages
-
I created a spreadsheet on my mac with numbers, and now it tells me I have to buy a newer version of numbers to access the spreadsheet I created with the old program. if I wanted problems like that I would go back to using windows
Hi sar23,
You may have inadvertently created or edited the document in the new Numbers 3.0 (which is free; you don't have to buy it) and are now trying to open it with the old Numbers 2.3.
Both versions can be on your Mac at the same time, and can run at the same time. The icons are similar so it's easy to confuse them (old on top here, new on bottom).
The new Numbers 3.0 is in your Applications folder. The old Numbers 2.3 should be in a subfolder in the Applications folder named iWork '09 or similar.
If you accidently edited an old document in the new version and want to take to take it back to the old version, you can export it:
SG -
The lines I create with the pen tool are not showing up in After Effects.
I'm working on a project where I need straight lines. I've added the lines using the pen tool on solid layers, but they are not showing up before or after rendering. I can see where they are supposed to be when I isolate the layer they are on. I have the lines at one pixel, solid white and the layers are on top of everything else. I took a screen shot. Can anyone help me?
Well, I am still not 100% sure why the pen tool lines/masks are not showing up but I was able to work around it. I already had the stroke effect applied and set to all masks. Looking into this though, it seemed that they were only not showing up on the new solid layers I had created. I duplicated the layers the masks were working on instead and it seems to resolve the problem for now. Thanks for your help!
-
What happens to the form I created with free trial when I upgrade?
I signed up for a free AdobeForms account 6 months ago. In that time I created a really detailed form. I am still able to access the account and the form to this day without any problems. However I now want to upgrade my account so I can do more with the form I created with the free account.
What will happen to my existing form when I upgrade my AdobeForms account to paid subscription? I am assuming it would just remain in my account. However when my secretary called to order the full subscription, the sales rep suggested that the existing form created via the trial would be wiped-out upon upgrading the account.
Is this true/accurate? I do not want to lose the form I have already perfected when upgrading.
Thank you for any info!!Thanks! Ok... well we're going to order the full subscription now, I made a PDF backup of the web form in case, but really looking forward to not losing the designed form.
-
Retreiving the content created with the Note Tool via Javascript??
Hey guys, is it possible to retrieve the text content created with the Note Tool from the tool palette in a photoshop document via Javascript? Basically, I wanted to store some text inside the Photoshop psd document, and then later on I can use scripting to access the content to be use as variables.
I have search the Javascript scripting reference pdf and the forum here, and I can't find any info the Note Tool. Much appreciated.Ok, so I am using the activeDocument.info.keywords property to store my text content. The content is basically a chunk of text that contains some parameters that the user can modify to save out a document. In my script, I am using a variable to store the content from the info.keywords property. But my next hurdle is how can I extract specific part of that variable into other variables, like storing the C:\projects\Textures\ into another variable? I've done some research and got a sense that the "match" method in javascript along with the use of regular expressions might do the job. But I am stuck. Any suggestions?
info.keywords property has the follow chunk of text:
// file path to save
path(C:\projects\Textures\)
// save file format (psd or tga, etc)
format (tga)
// include a single alpha channel with the file y/n
alpha(n)
// alpha name - default should be "alpha1"
alphaName(alpha1)
// scale from the original size
scale(.5)
//sharpening
sharpen(.5)
script code:
var saveDoc = activeDocument.info.keywords;
var savePath = saveDoc[0].match(regular expression goes here); // how to grab C:\projects\Textures\ from the saveDoc variable???
alert(savePath); -
my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas on how to correct this? This seems like a trivial error, but it's super annoying.
I called Apple and they said that they know about this problem. It's a problem with iCloud which their Engineers know about. (there was a new iCloud release, hence...) No ETA for a fix yet. I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list. I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve). I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward. They could have picked another color besides green to have this problem with and I wouldn't have been so upset. ;-)
-
Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?
This forum thread appears to point towards the problem.
Re: Unable to Switch Audio Sync Settings -
Convert an integer value that was created with the Excel DATEVALUE formula to a valid date?
Hello everyone,
How can I convert an integer value that was created with the Excel DATEVALUE formula to a valid date in SSIS?
Is this even possible?
For example:
=DATEVALUE("8/22/2008") will format the cell to display 39682.
Reading the column as a string to get the int value (39682) - how can I turn this into a valid date using SSIS and then importing the real date to sql server?
Thank you!You can use Script component for this and convert your integer values to Date. An example here is following:
CultureInfo provider = CultureInfo.InvariantCulture;
string dateString = "08082010";
string format = "MMddyyyy";
DateTime result = DateTime.ParseExact(dateString, format, provider);
Source: http://stackoverflow.com/questions/2441405/converting-8-digit-number-to-datetime-type
Vikash Kumar Singh || www.singhvikash.in -
I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.
Hi rgarden95,
Can you please confirm the exact version of Muse you are opening the file with?
To check the version of Muse, please click on help->About Adobe Muse CC.
Regards,
Akshay -
Hi, I tried to create a slideshow that contain more than 500 photos. Now, trying to open / execute / select the slideshow, iPhoto hangs with the spinning coloured wheel and I have only to force the deletion from System Preference. I already tried to rebuild the iPhoto Library (all the possible options) and tried to update teh version from 9.4.3 to 9.5 but the problem still persists: is there a way to delete this slideshow without selecting it ? How can I solve the problem, please?
Kind RegardsCan you restore your iPhoto Library from a backup version, that was created before you added the slideshow?
If not, have you tried to rebuild the slideshow with iPhoto Library Manager?
As described by Terence Devlin here: Re: iphoto library was created with an unrelased version of iphoto please quit and ugrade library by opening it in iphoto 2 or iphoto 4 -
Delete statement that uses a sub-select with the statement in the cursor
Hi all,
How to write write a delete statement that uses a sub-select with the statement in the cursor?
CURSOR excluded_dates IS
SELECT TO_TIMESTAMP(report_parameter_value, in_date_format_mask)
INTO my_current_date_time
FROM report_parameters
WHERE report_parameters.report_parameter_id = in_report_parameter_id
AND report_parameters.report_parameter_group = 'DATE_TIME'
AND report_parameters.report_parameter_name = 'EXCLUDED_DATE';
OPEN excluded_dates;
LOOP
FETCH excluded_dates INTO my_excluded_date;
EXIT WHEN excluded_dates%NOTFOUND;
DELETE FROM edr_rpt_tmp_inclusion_table
WHERE TO_CHAR(date_time, 'mm/dd/yyyy') = TO_CHAR(my_excluded_date, 'mm/dd/yyyy');
END LOOP;
CLOSE excluded_dates;ThanksHi,
In such case I think is better to create a view an perform the delete using it. Example (using HR schema):
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> create or replace view v_employees as select * from employees where first_name like 'J%';
View created
SQL> select * from v_employees;
EMPLOYEE_ID FIRST_NAME LAST_NAME EMAIL PHONE_NUMBER HIRE_DATE JOB_ID SALARY COMMISSION_PCT MANAGER_ID DEPARTMENT_ID
110 John Chen JCHEN 515.124.4269 28/09/1997 FI_ACCOUNT 8200,00 108 100
112 Jose Manuel Urman JMURMAN 515.124.4469 07/03/1998 FI_ACCOUNT 7800,00 108 100
125 Julia Nayer JNAYER 650.124.1214 16/07/1997 ST_CLERK 3200,00 120 50
127 James Landry JLANDRY 650.124.1334 14/01/1999 ST_CLERK 2400,00 120 50
131 James Marlow JAMRLOW 650.124.7234 16/02/1997 ST_CLERK 2500,00 121 50
133 Jason Mallin JMALLIN 650.127.1934 14/06/1996 ST_CLERK 3300,00 122 50
139 John Seo JSEO 650.121.2019 12/02/1998 ST_CLERK 2700,00 123 50
140 Joshua Patel JPATEL 650.121.1834 06/04/1998 ST_CLERK 2500,00 123 50
145 John Russell JRUSSEL 011.44.1344.429268 01/10/1996 SA_MAN 14000,00 0,40 100 80
156 Janette King JKING 011.44.1345.429268 30/01/1996 SA_REP 10000,00 0,35 146 80
176 Jonathon Taylor JTAYLOR 011.44.1644.429265 24/03/1998 SA_REP 8600,00 0,20 149 80
177 Jack Livingston JLIVINGS 011.44.1644.429264 23/04/1998 SA_REP 8400,00 0,20 149 80
181 Jean Fleaur JFLEAUR 650.507.9877 23/02/1998 SH_CLERK 3100,00 120 50
186 Julia Dellinger JDELLING 650.509.3876 24/06/1998 SH_CLERK 3400,00 121 50
189 Jennifer Dilly JDILLY 650.505.2876 13/08/1997 SH_CLERK 3600,00 122 50
200 Jennifer Whalen JWHALEN 515.123.4444 17/09/1987 AD_ASST 4400,00 101 10
16 rows selected
SQL> delete from v_employees where hire_date >= to_date('01/06/1998', 'dd/mm/yyyy');
2 rows deleted
SQL> regards, -
Issues with the SQL wrapper scripts created with the DB adapter
Hi All,
We have the wrapper sql scripts created with the DB adapter configurations which are being used to invoke the stored procedures.
To give you a background on the wrapper sql scripts-The Adapter Configuration wizard generates a wrapper API when a PL/SQL API has arguments of data types, such as PL/SQL Boolean, PL/SQL Table, or PL/SQL Record.
These two SQL files are saved in the same directory where the WSDL and XSD files are stored, and are available in the Project view.
The issue we are facing now is that whenever the associated package or the procedure structure undergoes a change we see an error as given below:
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/Application1_ABC_ESB/DBADP_Update_Out.wsdl [ DBADP_Update_Out_ptt::DBADP_Update_Out(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'DBADP_Update_Out' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the APPS.XXIRIS_SOA_R_WRAPPER.XXIRIS_AR_CUST_K$ API. Cause: java.sql.SQLException: ORA-04068: existing state of packages has been discarded ORA-04061: existing state of package body "APPS.XXIRIS_AR_CUST_K" has been invalidated ORA-04065: not executed, altered or dropped package body "APPS.XXIRIS_AR_CUST_K" ORA-06508: PL/SQL: could not find program unit being called: "APPS.XXIRIS_AR_CUST_K" ORA-06512: at "APPS.XXIRIS_SOA_R_WRAPPER", line 1 ORA-06512: at line 1 [Caused by: ORA-04068: existing state of packages has been discarded ORA-04061: existing state of package body
In such cases we need to either execute the wrapper scripts again or refresh the connection pool in case the wrapper sql scripts for that procedure are not available.
In some cases we see that the first instance errors out.However the second request and the subsequent requests after that goes through successfully.
Please do let me know if anyone has faced such issues before.
Any inputs in this regard would be of great help.
Thanks in advance!
DeepthiI stumbled on a link in the oracle forum which says that the "create or replace package XXX" at the start of the PL/SQL procedure when run seems to intermittently cause the ORA-04068: existing state of packages has been discarded problem.
As per the solution suggested an “alter package XXX compile" can be executed after the changes are made and then we would no longer get the error in BPEL/ESB and dont have to bounce the server too.
__http://forums.oracle.com/forums/thread.jspa?threadID=185762_
However the above solution does not seem to resolve the issue.
Any help in this regard would be highly appreciated.
Thanks,
Deepthi -
The PDF has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document. Is there a way to do this? HELP!
Sorry I thought was just a one off, it would be no use for large volumes.
Do you not have this avaiable in the print menu in Preview with these documents?
I have also found a link on the Adobe web site that discusses that this facilty is enabled by the creater of the PDF.
http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd61510979419 5ff-7e0d.w.html
If you do a web search there are various claims on how to save a protected PDF, I have'nt a way to test the proceedures. I would want a copy of any forms that I sent off, not sure why they protect them in this way, there must be a reason. -
What is the user scope when created with the API?
I noticed that users created with the Adobe Connect API for my meeting/account are always listed in the Administration -> Users and Groups area. Which probably means that a user's login is only valid for my meetings. So if they wanted to register or join a meeting controlled by someone else, they would have to re-register or be re-created by that admin. Is this correct?
I'm trying to confirm this so that I know how to register a user on my website. It would be ideal if my website would register the user and also log the user in without the user having to enter a separate password (my website would generate and store the password). If the API creates a user only for my meetings then this is not a problem. The user will just always have to go through my website to get to the meeting. However, if the user created by my Adobe API account can be used to access/register in another person's meetings on Adobe then this approach is not so good because the user would need to know their password.yea, guest registration is not an option as I need to restrict access to the meeting.
My main concern is that another Connect account holder can change the user's password. If this ever happens, my website would have an old password and would be broken because it wouldn't be able to log the user into their meeting. This may be a rare case, but the website will be charging for these meetings/webinars. If the user can't get in at the time of the meeting.... i'll have a lot more problems.
I guess I'll just need to provide a way for the user to change or enter their own password.
Thanks for the info! -
Residual items are created with the current exchange rate
Hello,
When a residual item is created due to a short payment for an invoice, the residual item is created with the exchange rate that is in effect on that day. Is it possible to assign the exchange rate equal to the rate that existed on the original invoice.
Thanks in advance for you ideas.
KarlaHi,
You can use transaction FB05 for doing the clearing there you would be able to input the exchange rate you need for clearing the AP/AR/GL items.
But the exchange rate at the time of making/receiving the payment or at the time of clearing is what should be applied.
Regards
K.R
Maybe you are looking for
-
Follow Up Transaction Default screen in Solution Manager
SAp has provided Screen profile and Function code for creation of incident.Chnage request in Solution Manager.But when i try to create a new incident/CR from existing Incident as follow up transaction, the same screen doenot get defaulted.Item detail
-
No Connectivi​ty on line - rebooting Westell 7500 does not help
Hi All, We've been having sync issues for well over 2 weeks now. Sometimes hard rebooting the Westell 7500 (Model:A90-750015-07 - firmware ver: 5.01.00.02) will allow the line to stay up for a day or so. But since yesterday, nothing has helped. The l
-
Icon for hp web smart printing has disappeared in firefox. It does appear in IE but I use firefox most of the time. I rt clicked in upper right and chose customize. Icon is not there.
-
Server 2012 RDS - User Profile Disks
Hello, I'm implementing Server 2012 RDS session-based. Can I increase the limit of User Profile Disk after it is initially set? Is it ok that my Admin user has a User Profile Disk i.e. no local profile on the server as they did previously. Are PSTs s
-
Getting most coverage/download speed out of Three Airport Extremes & One Express
Aloha Apple Genius's please....HELP:-) I have been having the following coverage/download speed issues with my new network installed in a couple of our buildings. A) Mac gets 0.5 to 1.5Mbps download and 4.0-5.0Mbps upload and it connects to ston